V5703 - Wiremold

Supports Lengths Of 500 and 700 Series Raceway. Ivory.

2348WH - Wiremold

One-Gang. For Deeper Switches and Devices. Base Has Rectangular Ko. Accepts Industry Standard Faceplates For Switch and Communication Devices. White

5748SWH - Wiremold

For Shallow Type Switch and Duplex Receptacles. Base Has 1/2" Trade Size Kos. Accepts Nema Single-Gang Standard Faceplates. Note: Certified to Canadian Safety Standards For Sale In Canada. When Ordering These Products, Change The "V" Color Prefix to "VC" or The "WH" Color Suffix to "WHC" to Denote The Canadian Versions. White

WH2010B - Wiremold

Closes Off The Open End Of 2000 Series Raceway. White

5400CWH - Wiremold

Use With 5400TB Series Raceway. Available In 8' (2.44M) Lengths, Packed In 48' (14.6M) Per Carton. White

5400TBWH - Wiremold

Two Equal Compartments - Base Accepts Single or Twin Snap Cover. 5400 Series Raceway Is Available In 8' (2.4M) Lengths With Pre-Punched Mounting Holes, Packed 48' (14.6M) Per Carton. White

5781A - Wiremold

Male Connector With 3/4 Inch Trade Size Conduit Opening For Connecting Raceway to Conduit Boxes or Panel Boxes That Have Kos For Conduit. Can Also Be Used With Conduit Type Fittings. When Used With 700 Series Raceway, Break Out Crescent Twistout In Connector.

G4000C - Wiremold

.040" (1.0MM) Galvanized Steel. Packed Ten 5' (1.5M) Lengths Per Carton. 4000C Cover Is Compatible With 6000 Base. Gray

V4000C - Wiremold

.040" (1.0MM) Galvanized Steel. Packed Ten 5' (1.5M) Lengths Per Carton. 4000C Cover Is Compatible With 6000 Base. Ivory

WH20GB306TR - Wiremold

Tamper-Resistant Plugmold Multi Outlet System, 6 Outlets, Steel (Raceway);Thermoplastic (Receptacle) Material, White Painted Enamel, 15 A, White, 3 FT Length, 1-9/32 In Width, 3/4 In Height, Single TR Receptacle Outlet, 3-Wire 1-Circuit Grounding Outlet Configuration, 6 In Outlet Center Distance, 1.95 LB

5747WH - Wiremold

For Standard Shallow Switches and Receptacles Including Single-Gang Combination Devices. Base Has Two 1/2" Trade Size Kos. Larger Gang Boxes Available By Special Order. Single-Gang: 4 5/8" L X 2 7/8" W (117MM X 73MM). Accepts Nema Single-Gang Standard Faceplates. Note: Certified to Canadian Safety Standards For Sale In Canada. When Ordering These Products, Change The "V" Color Prefix to "VC" or The "WH" Color Suffix to "WHC" to Denote The Canadian Versions. White

XHHW30BLPCS - Aluminum

V5751A - Wiremold

For Deep Extensions From Existing Wall Boxes. Accepts Nema Single-Gang Standard Faceplates. Ivory

817 - Wiremold

800 Series Internal Elbow. For Right Angle Turns Around Internal Corners. Finish - Ivory

818 - Wiremold

800 Series External Elbow. For Right Angle Turns Around External Corners. Finish - Ivory

5748WH - Wiremold

For Deep Switches and Receptacles. Base Has Two 1/2" Trade Size Kos. Larger Gang Boxes Available By Special Order. Single-Gang: 4 5/8" L X 2 7/8" W (117MM X 73MM). Accepts Nema Single-Gang Standard Faceplates. Note: Certified to Canadian Safety Standards For Sale In Canada. When Ordering These Products, Change The "V" Color Prefix to "VC" or The "WH" Color Suffix to "WHC" to Denote The Canadian Versions. White

BK20GB506 - Wiremold

5' Plugmold Multioutlet System With 10 Single Outlets. Black

2344 - Wiremold

One-Gang. Base Has Rectangular Ko. Accepts Industry Standard Faceplates For Switch and Communication Devices. Note: All Boxes Have Combination Twistouts For 400BAC, 800BAC, and 2300BAC On All Four Sides. Ivory

4001DA - Wiremold

Required For Holding G4000D Divider In Place. Use One Every 2 1/2' (.762M). (Galvanized)

WH20GB306TRUSB - Wiremold

3' Plugmold Multioutlet Usb System White