Filter Your Results

Conduit Bodies, Outlet Boxes, Covers & Accessories

• Categories
• Boxes & Covers

---

• Product Type

  

  • 1 1/2 FM7 Body (4)
  • 1 1/2 NPT Fem CST Iron Vert/Horz Seal FT (2)
  • 1 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 1 1/2" Pipe/Conduit Clamp, Rigid, 1 1/2", Pre-Asm, HD Gal (2)
  • 1 1/4 FM7 Body (7)
  • 1 1/4 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1 In FM7 Body (6)
  • 1 NPT Male Al Cord/Cab FTG Neo Bush (3)
  • 1" 1X3/4 Reduc Bushng STL NPT Haz Loc (2)
  • 1" Pipe/Conduit Clamp, Rigid, 1", Pre-Asm, HD GLVD (2)
  • 1/2 FM7 Body (5)
  • 1/2 In STL L-T CRD&CBL Conn (3)
  • 1/2 In STR Strain RLF Conn (3)
  • 1/2 NPT 90 Deg Cord/Cab FTG Neo Bush (2)
  • 1/2 NPT CST Iron FS BX Two GNG MTG Lugs (2)
  • 1/2 NPT Male Al Cord/Cab FTG Neo Bush (2)
  • 1/2 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1/2" Pipe/Conduit Clamp, Rigid, 1/2", Pre-Asm, HD Glvani (2)
  • 2 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 2 FM7 Body (6)
  • 2" Pipe/Conduit Clamp, Rigid, 2", Pre-Asm, HD GLVD (2)
  • 3/4 NPT CST Iron FD BX Two GNG MTG Lugs (2)
  • 3/4 NPT Male Al Cord/Cab FTG Neo Bush (5)
  • 3/4 NPT Male Cord/Cab FTG Neo Bush (2)
  • 3/4 Outlet BX 2 CVR For THRD Rigid/Imc (2)
  • 3/4" Pipe/Conduit Clamp, Rigid, 3/4", Pre-Asm, HD Glvani (2)
  • 3/4" Pipe/Conduit Clamp, Rigid, 3/4", Pre-Asm, SSL (2)
  • 90 Degree Fitting (2)
  • 90° Connector (17)
  • 90°Connector (17)
  • AC/MC Single Screw Strap Type Connector (5)
  • Angular Fitting (7)
  • Austin Energy CT Cabinet (3)
  • Beam Clamp (8)
  • Blank Cover (23)
  • Box Cover (6)
  • Box Extender (4)
  • Box Hanger (2)
  • Box Mounting Bracket (2)
  • Box Mounting BRKT 16 Stud Spacing (2)
  • Bus Drop Support Grip (4)
  • Bushing (3)
  • Cable Connector (7)
  • Cable Gland (5)
  • Cable Support (3)
  • Carpet Plate and Cover (2)
  • Cast Device Box Cover (2)
  • Ceiling Box (8)
  • Ceiling Fixture Outlet Box (2)
  • Channel (8)
  • Channel Angle Fitting (4)
  • Channel Beam Clamp (2)
  • Channel Conduit Clamp (17)
  • CHNL, 1 5/8" X 1 5/8", 9/16" X 1 1/8" S-Holes, 14 Ga, 120 (2)
  • CHNL, 1 5/8" X 1 5/8", 9/16" X 7/8" Slotted Holes, 12 Ga, 120" (3)
  • CHNL, 1 5/8" X 1 5/8", B to B, 9/16" X 7/8" Slots, 12 Ga (2)
  • CHNL, 1 5/8" X 1 5/8", B to B, 9/16" X 7/8" Slots, 12 Ga, (3)
  • CHNL, 13/16" X 1 5/8", 9/16" X 1 1/8" S-Holes, 14 Ga, 240 (2)
  • CHNL, 13/16" X 1 5/8", 9/16" X 7/8" Slotted Holes, 14 Ga, 120" (5)
  • Clamp-On Entrance Cap (9)
  • Closure Plug (4)
  • Combination Coupling (3)
  • Commercial Fittings (4)
  • Compression Butt Splice (2)
  • Conduit Bodies (2)
  • Conduit Body (162)
  • Conduit Body and Cover (5)
  • Conduit Body Cover (6)
  • Conduit Body Gasket (16)
  • Conduit Coupling (29)
  • Conduit Nipple (237)
  • Conduit Outlet Body (67)
  • Conduit Outlet Body Cover (4)
  • Conduit Outlet Box (9)
  • Conduit Outlet Box and Cover (3)
  • Conduit Outlet Box with Cover (30)
  • Conduit Seal Body (23)
  • Conduit Support (2)
  • Connector (28)
  • Cord Connector (19)
  • Cord Gland (28)
  • Cord Grip Connector (19)
  • Cord Support Grip (2)
  • Corner Switch Box (4)
  • Coupler (14)
  • Coupling (18)
  • Coupling Nut (3)
  • Cover (18)
  • Device Box (31)
  • Device Box Cover (3)
  • Device Cover (6)
  • Direct Mount Box (2)
  • Dust Tight Grip (3)
  • Elbow (105)
  • Electrical Box (33)
  • Electrical Switch and Outlet Box (4)
  • Emt Conduit Elbow (4)
  • Emt Set Screw Coupling (3)
  • EMT Standard Radius Elbow (9)
  • Enclosure Back Panel (2)
  • End Cap (6)
  • Extra Duty In-Use Cover (2)
  • Factory Bent Elbow (6)
  • Fan Box (2)
  • Fan Support Box (2)
  • Fixture Support Box (7)
  • Flat Box Cover (9)
  • Flat Device Cover (3)
  • Flat Tee Plate Fitting (2)
  • Flexible Connector (6)
  • Floor Box (6)
  • Floor Box Assembly (5)
  • Floor Box Cover (5)
  • Four Hole Corner Agl, SSL 304 (2)
  • Four Hole Corner Angle (2)
  • Grounding Bridge (4)
  • Half-Slot Channel (17)
  • Handy Box Cover (5)
  • Insulated Connector (12)
  • Junction Box (3)
  • Liquid Tight 45° Connector (19)
  • Liquid Tight 45°Connector (19)
  • Liquid Tight 90° Connector (28)
  • Liquid Tight 90°Connector (33)
  • Liquid Tight Conduit (3)
  • Liquid Tight Connector (4)
  • Liquid Tight Flexible Connector (6)
  • Liquid Tight Straight Connector (48)
  • Liquidtight Conduit Connector (2)
  • Liquidtight Flexible Nonmetallic Conduit (2)
  • Louisiana Entergy CT Cabinet (4)
  • Masonry Box (9)
  • Metallic Liquidtight Fittings (3)
  • Mogul Conduit Body (4)
  • Nail Plate (3)
  • Nipple (27)
  • Non Metallic Liquid Tight 90° Connector (3)
  • Non Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic 90° Connector (4)
  • Non-Metallic 90°Connector (4)
  • Non-Metallic Cable Connector (6)
  • Non-Metallic Liquid Tight 90° Connector (3)
  • Non-Metallic Liquid Tight 90°Connector (6)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Liquid Tight Straight Fitting (2)
  • Nonmetallic Liquid-Tight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Conduit Connector (6)
  • Nonmetallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Round Outlet Box (4)
  • Non-Metallic Straight Connector (6)
  • Octagon Box (15)
  • Octagon Box Cover (2)
  • Octagonal Box (11)
  • Old Work Box (8)
  • Old Work Switch and Outlet Box (2)
  • Outlet & Switch Box (3)
  • Outlet Box (64)
  • Outlet Box Extension Ring (2)
  • Outlet Cover (5)
  • Post Base (8)
  • Post Base 1 5/8" X 1 5/8" CHNL, 6" X 6" X 3 1/2" SQ Ba (2)
  • Post Base 1 5/8" X 1 5/8" CHNL, 8" X 3 1/8" X 3 1/2" Base, (2)
  • Pre-Assembled Pipe Clamp (22)
  • Pro Connector (3)
  • Protective Cover (2)
  • PVC Coated Steel Rigid Conduit Standard Radius Elbow (3)
  • Raised Box Cover (36)
  • Receptacle Cover (3)
  • Retrofit Brace (2)
  • Rework Box (2)
  • Rigid Conduit Body Cover (6)
  • Rigid Conduit Elbow (3)
  • Rigid Conduit Nipple (65)
  • Romex Connector (5)
  • Round Box (3)
  • Round Ceiling Pan (3)
  • Round Plastic Cover Kit (2)
  • Saddle Grip Connector (5)
  • Safety Plate (4)
  • Sealing Fitting (14)
  • Sealing Locknut (9)
  • Self Closing Receptacle Cover (2)
  • Service Entrance Fitting (5)
  • SH Type Channel (5)
  • Shallow Box (3)
  • Single Eye Bus Drop Grip (2)
  • Slotted Channel (3)
  • Spring Nut (6)
  • Square Box (12)
  • Square Box Cover (3)
  • Square Box Extension Ring (6)
  • Square Cover (25)
  • Square Device Cover (11)
  • Square Outlet Box (3)
  • Square Post Base (2)
  • Square Surface Cover (12)
  • Square Washer (4)
  • Squeeze Connector (16)
  • Stamped Cover (3)
  • Standard Channel (23)
  • Standard Radius Elbow (10)
  • Steel Box Support Products & Accessories (3)
  • Steel Boxes and Covers (15)
  • Steel Gang Box (2)
  • Steel Switch Box (26)
  • Straight Wall (8)
  • Strain Relief Connector (11)
  • Strain Relief Cord and Cable Connector (8)
  • Strain Relief Grip (4)
  • Strap (5)
  • Strap Connector (14)
  • Strut Clamp (8)
  • Strut Strap (18)
  • Switch & Outlet Box (8)
  • Switch and Receptacle Box (7)
  • Switch Box (19)
  • Switch Box Partition (2)
  • Switch/Receptacle Box (3)
  • T Box (2)
  • Telescoping Screw Gun Bracket (2)
  • Thread Rod (4)
  • Threaded Unilet (4)
  • TMC Armored Cable Gland (10)
  • U Bolt (3)
  • Universal Clamp (6)
  • Universal Cone Nut (3)
  • Upright Fitting (4)
  • Utility Box (12)
  • Utility Box Cover (12)
  • Utility Box Extension Ring (2)
  • Weatherproof (11)
  • Weatherproof Box (4)
  • Weatherproof Box Cover (2)
  • Weatherproof Boxes & Extensions (44)
  • Weatherproof Closure Plug (4)
  • Weatherproof Cluster Cover (8)
  • Weatherproof Cover (5)
  • Weatherproof Covers (20)
  • Weatherproof Device Box Cover (2)
  • Weatherproof Extension Ring (2)
  • Weatherproof Gang Box (24)
  • Weatherproof In-Use Cover (2)
  • Weatherproof Lampholder Cover (4)
  • Weatherproof Outlet Box (11)
  • Weatherproof While-In-Use Device Box Cover (2)
  • Weatherproof While-In-Use Device Cover (3)
  • Wire Holder (4)
  • WP GFI Cover (2)
  • Show More...

• Brand

  

  • Abb Installation Products, Inc (42)
  • Adalet-PLM (2)
  • ALLIED MOULDED (1)
  • Allied Moulded Products (89)
  • Allied Tube (Power Strut) (2)
  • Aluminum (22)
  • American Fittings Corp (16)
  • AMERICAN INDUSTRIAL (2)
  • Amfico (94)
  • Anamet Electrical Inc (2)
  • Appleton (445)
  • Appleton/Oz Gedney (6)
  • APPOZGCOMM (13)
  • ARLINGTON (115)
  • Arlington Industries (116)
  • Arrow Hart (6)
  • BELL (76)
  • BOLTED FRAMING (3)
  • Bridgeport (186)
  • Bridgeport Fittings (97)
  • CADDY (1)
  • CALBRITE (90)
  • Calpipe Industries, Inc (3)
  • Carlon (91)
  • Carlon / Nutek (1)
  • Carlon(R) (19)
  • Conduit Pipe Products (130)
  • Cooper B-Line/Cable Tray (7)
  • COOPER WIRING DEVICES (7)
  • Copper (1)
  • Crouse Hinds (2)
  • Crouse-Hinds (124)
  • Eaton (1006)
  • EATON B-LINE SERIES (16)
  • EATON CROUSE-HINDS SERIES (580)
  • Eaton Wiring Devices (12)
  • EC-KORNS (92)
  • Ecn/Korns (1)
  • ECN-KORNS (238)
  • Erico, Inc. Eritec-Caddy (11)
  • ERICSON (1)
  • FASTENERS (2)
  • FLEXBOX[R] (1)
  • Flexible Conduit (3)
  • FLEX-STRUT INC. (1)
  • Haydon Corporation (14)
  • Hoffman Enclosures, Inc. (14)
  • Hubbell Lenoir City (8)
  • Hubbell Wiring Device-Kellems (1)
  • Hubbell Wiring Devices (27)
  • Hubbell--Raco (6)
  • HUGH CUNNINGHAM COMPANY (4)
  • Iberville (2)
  • Ipex Usa LLC-233406 (5)
  • Kill (2)
  • KILLARK (90)
  • Kindorf (19)
  • Kraloy (1)
  • KWIKON (1)
  • LEGRAND-ON-Q (2)
  • LEGRAND-PASS & SEYMOUR (19)
  • LH DOTTIE (19)
  • Meltric (1)
  • METAL PRODUCTS COMPANY (4)
  • MILBANK (1)
  • Minka Lavery Lighting (2)
  • Mulberry (92)
  • Multi Fittings/Kraloy (2)
  • NIEDAX INC. (1)
  • Nsi Industries (1)
  • nVent CADDY (57)
  • nVent ERICO (1)
  • Nvent Hoffman (7)
  • OCAL (7)
  • Oldcastle Infrastructure Inc (17)
  • Orbit Industries Inc. (4)
  • O-Z/GEDNEY (19)
  • PANDUIT (1)
  • Pass & Seymour (4)
  • Pass & Seymour/Legrand (6)
  • Pass and Seymour (93)
  • Peco Fasteners (11)
  • Peco Fasteners, Inc. (5)
  • PLASTIBOND (210)
  • Platinum Tools (8)
  • PLATINUM TOOLS INC (2)
  • POWER-STRUT (1)
  • PREMISE WIRING (3)
  • PVC & Accessories (58)
  • Quazite (10)
  • Rab Lighting (1)
  • RAB Lighting Inc (4)
  • Rack-A-Tiers (1)
  • RACO (25)
  • Rectorseal (1)
  • Red Dot (2)
  • REIKER (10)
  • Remke (2)
  • Remke Industries (28)
  • ROBROY (73)
  • Robroy Stainless (15)
  • Robroy/Ecn Korns (24)
  • Robroy/Plasti-Bond (3)
  • SNAP 2 IT (7)
  • SOUTHWIRE COMPANY (1)
  • Southwire Rough Electrical Com (72)
  • STANLEY SALES CO LLC (2)
  • Star Teck (2)
  • Steel City (239)
  • SUPERFLEX LTD. (17)
  • Superstrut (139)
  • T&B (1)
  • T&B Fittings (1)
  • T&B Ind Fitting (200)
  • T&B Liquidtight Fittings (5)
  • T&B Rigid Fittings (1)
  • Taymac (65)
  • TAYMAC CORPORATION (1)
  • TECHLINE MFG (1)
  • TEXAS GASKET & PACKING CO (18)
  • Thomas & Betts (20)
  • Thomas&Betts-Abb Ins Prod (32)
  • Tiffin Insulators CO. (2)
  • Tork(R) (1)
  • Union Box/CVR (2)
  • Unistrut Corp. (33)
  • Unity MFG (2)
  • WIREMOLD (65)
  • WIRING DEVICE-KELLEMS (40)
  • Woodhead (1)
  • Show More...

• Trade Size

  

  • 0 (1)
  • 0.375 (4)
  • 0.5 (20)
  • 0.5 in (14)
  • 0.75 (18)
  • 0.75 in (12)
  • 0-50 (1)
  • 1 (47)
  • 1 1/2 IN (5)
  • 1 1/2 INCH (2)
  • 1 1/4 in (7)
  • 1 1/4 INCH (2)
  • 1 in (76)
  • 1 in , 27 mm (1)
  • 1 INCH (72)
  • 1 PH (15)
  • 1 pipe (1)
  • 1 TO 1 1/4 INCH (1)
  • 1.25 (6)
  • 1.25 in (14)
  • 1.5 (7)
  • 1.5 in in (14)
  • 1/2 (16)
  • 1/2 in (104)
  • 1/2 in. (1)
  • 1/2 INCH (67)
  • 1-1/2 (22)
  • 1-1/2 in (52)
  • 1-1/2 in , 41 mm (1)
  • 1-1/2 in;35 mm (1)
  • 1-1/2 INCH (59)
  • 1-1/2 Inch, 2 Inch (1)
  • 1-1/4 (20)
  • 1-1/4 in (31)
  • 1-1/4 in , 35 mm (1)
  • 1-1/4 in;1-1/2 in (3)
  • 1-1/4 INCH (54)
  • 1-1/4 to 1-1/2 in (1)
  • 1-1/4 to 3 (1)
  • 1-5/8 (1)
  • 2 (25)
  • 2 1/2 in (7)
  • 2 1/2 INCH (1)
  • 2 1/2 x 2 (1)
  • 2 A (12)
  • 2 in (75)
  • 2 in , 53 mm (1)
  • 2 INCH (56)
  • 2 pipe (1)
  • 2.5 (5)
  • 2.5 in (1)
  • 2.75 in (1)
  • 2-1/2 (6)
  • 2-1/2 IN (18)
  • 2-1/2 in;3 in (3)
  • 2-1/2 INCH (36)
  • 2-1/2 Inch, 3 Inch (2)
  • 2-1/2 to 3 in (1)
  • 3 (13)
  • 3 1/2 (2)
  • 3 1/2 in (2)
  • 3 1/2 INCH (2)
  • 3 in (43)
  • 3 in. (1)
  • 3 INCH (44)
  • 3 x 2 in (1)
  • 3 x 2 in. (1)
  • 3 x 2-1/2 in. (1)
  • 3.5 (2)
  • 3.5 in (7)
  • 3/4 (17)
  • 3/4 in (136)
  • 3/4 in NPT (1)
  • 3/4 INCH (69)
  • 3/8 (14)
  • 3/8 in (23)
  • 3/8 INCH (1)
  • 3/8/2015 (1)
  • 3-1/2 (4)
  • 3-1/2 in (1)
  • 3-1/2 in;4 in (3)
  • 3-1/2 INCH (25)
  • 3-1/2 Inch, 4 Inch (1)
  • 3-1/2 to 4 in (2)
  • 31531 (11)
  • 4 (10)
  • 4 in (24)
  • 4 in , 103 mm (1)
  • 4 in. (1)
  • 4 INCH (35)
  • 4 pipe (1)
  • 5 INCH (3)
  • 6 INCH (3)
  • 7/8 (1)
  • 7/8 in (2)
  • 798 (10)
  • Show More...

• Body Type

  

  • Conduit (74)
  • Conduit Seal (24)
  • Drawn (1)
  • E (3)
  • Form 35 (13)
  • Form 5 (38)
  • Form 7 (75)
  • Form 8 (4)
  • Form 9 (1)
  • Internally Threaded (1)
  • L (6)
  • LB (9)
  • LBD Mogul (4)
  • SR5 (1)
  • Swedged (1)
  • T (10)
  • TB (2)
  • X (5)
  • XA (1)
  • Show More...

• Connection Type

  

  • 3/4 in Connector (1)
  • 90° (1)
  • Ball to Plain (1)
  • C x C (3)
  • Clamp-On (9)
  • Combination (3)
  • External Threaded (17)
  • F x C (1)
  • Female (6)
  • Female Threaded (2)
  • FEMALE, FEMALE (5)
  • FMC (11)
  • Grip (10)
  • Liquidtight (6)
  • Liquid-Tight (6)
  • Male (2)
  • Male x Female (18)
  • MALE, FEMALE (8)
  • Nail-On (1)
  • NPT (9)
  • Push-In (1)
  • Rigid (2)
  • Screw (9)
  • Screw;Strap (11)
  • Screw-In (3)
  • Screw-On (1)
  • Set Screw (3)
  • Single Screw Strap-Type (2)
  • Snap-In (9)
  • Snap-On (2)
  • Squeeze (16)
  • Straight (45)
  • Straight Male (46)
  • Straight Male NPT (9)
  • Tapered Threaded (1)
  • Threaded (274)
  • Threaded Hub (8)
  • Threaded x Push In (6)
  • Threaded x Screw (2)
  • Threaded x Screw-In (11)
  • Threaded/Set Screw (18)
  • U Shaped (1)
  • UNC (10)
  • UNCR (1)
  • Show More...

• Material

  

  • 0.0625 Inch Galvanized Steel (2)
  • 11 Gauge Low Carbon Steel (5)
  • 12 Gauge Low Carbon Steel (9)
  • 14 Gauge Low Carbon Steel (14)
  • 16 Gauge Low Carbon Steel (4)
  • 2 MIL Red Urethane Aluminum (Interior), 40 MIL Gray PVC Aluminum (Exterior) (2)
  • 2 Mil Red Urethane Coated Aluminum Body Interior, 40 Mil Gray PVC Coated Aluminum Body Exterior (1)
  • 2 Mil Red Urethane Coated Ferrous Metal Body Interior, 40 Mil Gray PVC Coated Ferrous Metal Body Exterior (16)
  • 2 Mil Red Urethane Coated Ferrous Metal Interior, 40 Mil Gray PVC Coated Ferrous Metal Exterior (15)
  • 2 MIL RED URETHANE COATED INTERIOR, 40 MIL GRAY PVC COATED EXTERIOR FERROUS (1)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Aluminum (Body), Stainless Steel (Screw) (4)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (18)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (Body), Stainless Steel (Screw) (61)
  • 2 MIL Red Urethane Ferrous Metal (Interior), 40 MIL Gray PVC Ferrous Metal (Exterior) (12)
  • 2 MIL Red Urethane Ferrous Metal Interior, 40 MIL Gray PVC Ferrous Metal Exterior (20)
  • 304 (9)
  • 304 Stainless Steel (47)
  • 316 (6)
  • 316 Stainless Steel (77)
  • 316 Stainless Steel (Body, Cover and Screws);Neoprene (Gasket) (1)
  • 40 MIL GRAY PVC COATED (OUTSIDE), 2 MIL RED URETHANE COATED (INSIDE, THREAD) ALUMINUM (27)
  • 40 Mil Gray PVC Coated Ferrous Metal (2)
  • 40 Mil Gray PVC Coated Ferrous Metal Body Interior/Exterior (2)
  • 752 (1)
  • 773 (1)
  • 779 (1)
  • 832 (1)
  • 838 (1)
  • 840 (1)
  • 996 (1)
  • ABS (1)
  • ABS Injection Molded Plastic (1)
  • ABS/AES (1)
  • Acrylonitrile Butadiene Styrene, Acrylonitrile Ethylene Styrene (1)
  • Aluminum (396)
  • Aluminum (Body);Copperfree Aluminum (Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (6)
  • Aluminum (Body, Gland Nut, Lock Nut);Steel (Ferrule);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (1)
  • ALUMINUM ALLOY (1)
  • Aluminum Body and Gland Nut, Neoprene Seal (3)
  • Aluminum Body, Copper Plated Stainless Steel Spring, Neoprene Seal (1)
  • Aluminum Body, Neoprene Seal (5)
  • Aluminum Die-Cast (1)
  • Aluminum Fittings, Galvanized Steel Mesh (4)
  • Aluminum, Copper Free (less than 4/10 of 1%) (56)
  • Antique Bronze plated zinc cover, Antique Bronze plated steel flange (1)
  • ASTM A1011 Grade 33 Steel (1)
  • ASTM A36/A575/A576/A635/A1011 Steel (1)
  • ASTM A36/A575/A576/A635/A570 Grade 33 Steel (2)
  • ASTM A570 GRADE 33 STEEL (1)
  • ASTM A575/A576/A635/A36/A570 GRADE 33 STEEL (1)
  • ASTM A653 33 STEEL (1)
  • ASTM A653 Grade 33 Low Carbon Steel (1)
  • Beige/Tan Fiberglass Reinforced Polyester BMC (7)
  • Beige/Tan Polycarbonate (1)
  • Black Polycarbonate (1)
  • Brass (19)
  • Brass, Plastic (1)
  • Brass/Non-Metallic (1)
  • Brass-Plated (1)
  • Bronze (Bridge);Paintable Plastic (Cover) (1)
  • Bronze, Tin Coated (1)
  • Carbon Steel (5)
  • Cast Aluminum (10)
  • Cast Grayloy-Iron (3)
  • Cast Iron (1)
  • Cast Malleable Steel (3)
  • Cast Metal (2)
  • Cast Zinc (2)
  • Cold Rolled High Carbon Steel (5)
  • Cold-Rolled High-Carbon Steel (1)
  • Copper (5)
  • Copper (Conductor) (2)
  • Copper Free Aluminum (4)
  • Copperfree (4/10 Of 1 PCT Maximum) Aluminum (7)
  • Copperfree Aluminum (4)
  • Copper-Free Aluminum (15)
  • Die Cast Aluminum (12)
  • Die Cast Metal (2)
  • Die Cast Zinc (16)
  • Die-Cast Aluminum (136)
  • Die-Cast Aluminum/Stainless Steel (1)
  • Diecast Copperfree (4/10 Of 1 PCT) Aluminum (1)
  • Die-Cast Copper-Free Aluminum (9)
  • Die-Cast Metal (21)
  • Die-Cast Zinc (62)
  • Die-Cast Zinc and Steel;Non-Metallic (Insulator) (3)
  • Die-Cast Zinc Spring Steel;Plastic (Bush) (1)
  • Ductile Iron (1)
  • Elastomer/Thermoplastic (1)
  • Electrogalvanized Steel (Body/Nut);Natural/Neoprene (Bushing) (13)
  • Electrogalvanized With Aluminum Acrylic Painted Feraloy Iron Alloy (20)
  • EPDM RUBBER (1)
  • Feraloy (1)
  • FERALOY IRON ALLOY (52)
  • Feraloy Iron Alloy (Body And Cover);Neoprene (Gasket ) (4)
  • Feraloy Iron Alloy Body and Gland Nut, Neoprene Seal (8)
  • Feraloy Iron Alloy Body, Steel Gland Nut, Neoprene Seal (1)
  • Feraloy Iron Alloy with Electrogalvanized and Aluminum Acrylic Paint (Body/Gland Nut);Neoprene (Bushing) (4)
  • Feraloy(R) Iron Alloy (1)
  • Feraloy(R) Iron Alloy (Body);Copper-free Aluminum (Cover) (5)
  • FERROUS (6)
  • Ferrous Metal (2)
  • Fiberglass Reinforced Polyester BMC (5)
  • Fiberglass Reinforced Polyester BMC;Carbon Steel (Fastener);Poly Vinyl Chloride (Clamp) (5)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener);Poly Vinyl Chloride (Clamp);Metal (Ear) (2)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener);Poly Vinyl Chloride (Clamp);Metal (Wing Bracket, Ear) (2)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener, Clamp) (1)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener, Clamp);Metal (Ear) (1)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener, Clamp);Metal (Wing Bracket, Ear) (1)
  • FIBERGLASS REINFORCED THERMOSET POLYESTER (1)
  • Galvanized Steel (39)
  • Galvanized Steel (Strand);Bronze (Equalizer);Aluminum (Eye);Mylar (Tag) (2)
  • Galvanized Steel Mesh for Insulated Cables, Plastic Coated (1)
  • Galvanized Steel/Zinc (1)
  • Glass Filled Nylon (1)
  • Gray Nylon (6)
  • Grayloy-Iron (47)
  • Halogen Free Polyamide (1)
  • Heavy Duty Die Cast Zinc (5)
  • Heavy Duty Die-Cast Metal (2)
  • High Impact Polycarbonate (1)
  • High Impact PVC (1)
  • HOT ROLLED OILED PICKLED ASTM A36/A635/A575/A576/A1008 STEEL (17)
  • HOT ROLLED PICKLED OILED ASTM A575, ASTM A576, ASTM A635, ASTM A36, ASTM A570 33 STEEL (1)
  • Hot Rolled, Pickled and Oiled Plate or Strip Steel (44)
  • Injection Molded Black Polycarbonate (Box), Cast Brass (Cover), Closed Cell Rubber (Gasket), Nitrile (O-Ring), Plated Carbon Steel (Fastener), Galvanized Steel (Dust Plate), Steel (Wing Bracket) (1)
  • Injection Molded Black Polycarbonate (Box), Dark Bronze Plated Cast Brass (Cover), Closed Cell Rubber (Gasket), Nitrile (O-Ring), Plated Carbon Steel (Fastener), Galvanized Steel (Dust Plate), Steel (Wing Bracket) (1)
  • Injection Molded Black Polycarbonate (Box), Nickel Plated Cast Brass (Cover), Closed Cell Rubber (Gasket), Nitrile (O-Ring), Plated Carbon Steel (Fastener), Galvanized Steel (Dust Plate), Steel (Wing Bracket) (2)
  • Injection Molded Glass Reinforced Polyurethane (3)
  • IRON (6)
  • Iron, Malleable (4)
  • Iron/PVC (9)
  • Low Carbon Steel (64)
  • Low-Carbon Steel (8)
  • Machined Aluminum (3)
  • Machined Steel (6)
  • Machined Steel (Body/Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (2)
  • Malleable Iron (227)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Malleable Iron (Body);Steel (Cap, Ferrule);Polypropylene (Sealing Ring) (1)
  • Malleable Iron (Body);Steel (Ferrule, Caps);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Cap);Aluminum (Ferrule);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (29)
  • Malleable Iron (Clamps);Steel (Bolt and Nut) (1)
  • Malleable Iron Body And Nut, Steel Ferrule (3)
  • Malleable Iron Clamp, Steel U-Bolt and Nuts (1)
  • Malleable Iron Clamps, Steel Bolt and Nut (2)
  • Metal (26)
  • Metal (Clad Cable, Conduit Clamp) (1)
  • Metallic (2)
  • METALLIC COVER (3)
  • MILD STEEL (7)
  • MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER (12)
  • Molded Fiberglass Reinforced Thermoset Polyester;Carbon Steel (Fastener);Poly Vinyl Chloride (Clamp) (1)
  • Molded Fiberglass Reinforced Thermoset Polyester;Plated Carbon Steel (Fastener) (3)
  • Molded Fiberglass Reinforced Thermoset Polyester;Plated Carbon Steel (Fastener);PVC (Clamp) (4)
  • Molded Fiberglass Reinforced Thermoset Polyester;Plated Carbon Steel (Nail);PVC (Speed Clamp) (3)
  • Natural Copper Free Aluminum (Body);Neoprene (Grommet);Nylon (Retention Ring) (1)
  • Natural Finished Sand Copper Free Aluminum (4)
  • Natural Finished Sand Copper-Free Aluminum (3)
  • Neoprene (3)
  • Neoprene Rubber (3)
  • Nickel (1)
  • Nickel, Plastic (1)
  • Nickel-Plated (1)
  • Non Metallic (1)
  • Nonmetallic (1)
  • Non-Metallic (46)
  • Nylon (26)
  • Nylon 6/6 (1)
  • Paintable Plastic (Trim Plate) (1)
  • Phenolic (1)
  • Plaster (Ear) (1)
  • Plaster (Ring/Mud Ring) (1)
  • Plastic (104)
  • Plastic (Box) (3)
  • Plastic / Steel (1)
  • Plastic/Zinc (1)
  • Plastic;Steel (Closure) (1)
  • Plated Steel (1)
  • Poly Vinyl Chloride;Carbon Steel (Fastener) (3)
  • Poly Vinyl Chloride;Carbon Steel (Fastener);Galvanized (Snap In Bracket) (1)
  • Poly Vinyl Chloride;Carbon Steel (Fastener);Polycarbonate (Adjustable Mounting Plate) (2)
  • Polyamide (1)
  • Polyamide 6 (Body, cap);Neoprene (Sealing Ring) (1)
  • Polyamide/Nylon 6.6 (4)
  • Polycarbonate (53)
  • Polycarbonate (Box);Brass (Cover);Closed Cell Rubber (Gasket);Nitrile (O-Ring);Plated Carbon Steel (Fastener);Galvanized Steel (Dust Plate);Nonmetallic (Pop-In Cable Clamp) (1)
  • Polycarbonate/Neoprene Rubber (1)
  • Polycarbonate;Carbon Steel (Fastener) (6)
  • Polycarbonate;Carbon Steel (Fastener);Galvanized (Snap In Bracket) (3)
  • Polycarbonate;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener) (1)
  • Polycarbonate;Plated Carbon Steel (Fastener) (1)
  • Polyethylene;Polypropylene;Steel (1)
  • Polymer Concrete (14)
  • Polypropylene (2)
  • Polyurethane (2)
  • Porcelain (2)
  • Porcelain, Steel (2)
  • Porcelain;Steel (Clip) (1)
  • Powder coated metalElectrostatically painted (2)
  • Pre-Galvanized Steel (15)
  • Pressure Cast Aluminum (8)
  • PVC (106)
  • PVC;Galvanized Steel (Bracket) (1)
  • RED URETHANE 2 MIL COATED INTERIOR, GRAY PVC 40 MIL COATED EXTERIOR ALUMINUM (BODY), STAINLESS STEEL SCREW (1)
  • Rubber (1)
  • Rugged Polycarbonate;Synthetic Neoprene Rubber (1)
  • Rugged Uv-Resistant Polycarbonate (1)
  • SAND CAST ALUMINUM (1)
  • Schedule 40 PVC (1)
  • Sheet aluminum (26)
  • Sheet Steel (39)
  • Soft White PVC (4)
  • Solid Aluminum Plate, Heavy Duty Die-Cast Lid, Stainless Steel Screws (4)
  • Stainless Steel (57)
  • Stainless Steel (Mesh);Aluminum (Fitting) (2)
  • Stainless Steel (Strand);Aluminum (Body, Nut);Neoprene (Bushing) (1)
  • Stainless Steel (Strand, Eye, Equalizer);Mylar (Tag) (1)
  • Stainless Steel;Stainless steel (8)
  • Stamped Copper-Free Aluminum, Stainless Steel Screws (5)
  • Steel (1063)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Steel (Body/Compression Nut/Sleeve);Neoprene (O-Ring);Nylon (Ferrule);Stainless Steel (Wire Mesh) (1)
  • Steel (Box) (2)
  • Steel (Closure);Vinyl (End Cover) (1)
  • Steel (Mesh);Aluminum (Threaded Body);Neoprene (Gasket) (3)
  • Steel And Malleable Iron (1)
  • Steel Body and Gland Nut, Neoprene Seal (10)
  • Steel Body, Aluminum Gland Nut, Neoprene Seal (2)
  • Steel IN (108)
  • Steel with Zinc Electroplate and Chromate Finish Coat (Body, Gland Nut);Neoprene (Bushing) (24)
  • Steel, Galvanized (1)
  • Steel, Zinc Plated (3)
  • Steel/malleable iron (2)
  • Steel;Polyethylene (1)
  • Steel;Zinc plated Steel (Ground Cones);Thermoplastic Nylon (Seal Rings);Thermoplastic Nylon (Heat Curled Insulators);Malleable Iron (1)
  • Thermoplastic (58)
  • Turned Steel Body and Gland Nut, Neoprene Seal (1)
  • UV-Rated Plastic (45)
  • Zinc (54)
  • Zinc (Bridge);Paintable Plastic (Cover) (2)
  • Zinc (cover), Steel (flange), Plastic (box) (2)
  • Zinc Alloy (2)
  • Zinc Cast (14)
  • Zinc Chromate Sheet Steel (1)
  • Zinc Die Cast (80)
  • Zinc Die Cast Body with Steel Saddle Clamps and Insulated Throat (1)
  • Zinc Electroplated Steel (4)
  • ZINC PLATED STEEL (2)
  • Show More...

• Number Of Gangs

  

  • 1 (207)
  • 1;2 (2)
  • 1-gang (2)
  • 2 (61)
  • 2-gang (2)
  • 3 (12)
  • 3 in (8)
  • 3-gang (1)
  • 4 (16)
  • 5 in (3)
  • Three-gang (1)
  • Two (2)
  • Show More...

• Number Of Hubs

  

  • 1 (38)
  • 2 (147)
  • 3 (38)
  • 3 IN (29)
  • 4 (21)
  • 5 (4)
  • 7 (4)
  • Show More...

• Hub Size

  

  • 0.25 (1)
  • 0.5 (44)
  • 0.75 (37)
  • 0.75 in (1)
  • 0.75 in;19.1 mm (1)
  • 1 (52)
  • 1 1/2 in (1)
  • 1 in (65)
  • 1 in , 27 mm (1)
  • 1 INCH (24)
  • 1" (8)
  • 1.25 (38)
  • 1.25 in (1)
  • 1.25-1.5 (3)
  • 1.5 (46)
  • 1/2 in (66)
  • 1/2 in (Tab) (1)
  • 1/2 INCH (19)
  • 1/2" (8)
  • 1-1/2 in (52)
  • 1-1/2 In, 2 In (1)
  • 1-1/2 INCH (15)
  • 1-1/2" (1)
  • 1-1/4 in (35)
  • 1-1/4 In, 1-1/2 In (2)
  • 1-1/4 INCH (9)
  • 1-1/4" (3)
  • 2 (48)
  • 2 in (61)
  • 2 INCH (18)
  • 2" (11)
  • 2.5 (4)
  • 2.5-3 (3)
  • 2/3 in (1)
  • 2-1/2 in (14)
  • 2-1/2 In, 3 In (3)
  • 2-1/2 to 3 in (1)
  • 2-3/4 in (2)
  • 2-3/4 in (Top, Bottom);1-3/4 in (Side) (1)
  • 3 (4)
  • 3 in (28)
  • 3 INCH (3)
  • 3.5 (2)
  • 3.5 to 4 (2)
  • 3/4 in (104)
  • 3/4 INCH (25)
  • 3/4" (10)
  • 3-1/2 in (8)
  • 3-1/2 In, 4 In (4)
  • 4 (1)
  • 4 in (15)
  • 4 INCH (1)
  • 44624 (1)
  • Ex 1/2 1 3.4 (1)
  • Feraloy (1)
  • Show More...

• Special Features

  

  • 1 gang blank cover;and multi-lingual instructions included;device mount; installation hardware;gasket;weatherproof protection (3)
  • 1/2 IN Knockout (3)
  • 1/2" Knockout Saddle-Type Connector with Spring Set Screw;Concrete Tight when Taped (4)
  • 2 gang blank cover;and multi-lingual instructions included;device mount; installation hardware;gasket;weatherproof protection (3)
  • 2 In Center Spacing (28)
  • 2 Piece Union Design (12)
  • 3 holes 1-3/4" dia., 4 holes 1-1/8" dia. (3)
  • 3 In Width X 2-3/8 In Depth X 3-3/8 In Height, Load Capacity 1200 Lb, Weight 87 Lb per 100 (3)
  • 3 In Width X 2-3/8 In Depth X 5 In Height, Load Capacity 1200 Lb, Weight 93 Lb per 100 (3)
  • 3/8 to 1-1/4 In Raised Adjustable (2)
  • Accepts all standard device covers and tile rings and is available in all box sizes and conduit styles (3)
  • All Springs shall Mechanically Attached to Channel Nut (6)
  • Alloy A380 aluminum, certified zinc alloy and stainless steel springs provide increased corrosion resistance (4)
  • Aluminum construction resists corrosion. Neoprene grommet seals out oil and moisture. Nylon retention ring ensures superior holding power. (12)
  • Aluminum Cord Connector Provides Durable Performance (2)
  • Aluminum Cord Connector Provides Durable Performance;Knurled Finish Makes Them Easy to Handle and Maintain UL Listing by Hand Tighteningul Listing by Hand Tightening;Lightweight Design (10)
  • Aluminum. 316 stainless steel screws. Natural finish. (4)
  • Armoured/Non-Armoured Barrier Gland (4)
  • Assembly includes steel clamp with bolt/locknut and cushion (3)
  • Ball Burnished, mirror smooth finish (4)
  • Bolt head is combination slot and hex head for flexibility of attachment (35)
  • Bus Drop Grips are Used as Cable Support;They Relieve any Direct Tension from the Critical Connection and Absorb Vibration and Flexing;Bus Drop Grips are Woven of Galvanized Steel Wire (2)
  • Can be used with both Steel and Wood Stud;Speeds Installation Time (12)
  • Chemical Resistant;For Corrosive Environment;Non-Burning;Non-Dipping Thermoplastic Material (5)
  • Clamp Type Connector (4)
  • Claws provide temporary support for proper positioning until permanently installed (3)
  • Closed Mesh (4)
  • Closure plugs, ground screw, and mounting hardware included (11)
  • Color-Coded Thread Protectors for Easy Identification of Conduit Size (5)
  • Concentric and Eccentric Knockouts;Use in Fire-Rated Assemblies (54)
  • Concrete tight when taped (4)
  • Concrete-Tight (5)
  • Conduit Hubs Have Tapered Threads and Feature Integral Bushings for Protection of Wire Insulation (31)
  • Configuration Type FD, Dimension 2-3/4 In Width X 2-11/16 In Depth X 5-5/32 In Height (3)
  • Configuration Type FDC, Dimension 2-3/4 In Width X 2-11/16 In Depth X 6-1/32 In Height (3)
  • Configuration Type FS, With Mounting Lug and Ground Screw, Dimension 2-3/4 In Width X 1-7/8 In Depth X 5-5/32 In Height (3)
  • Configuration Type FSC, With Mounting Lug and Ground Screw, Dimension 2-3/4 In Width X 1-7/8 In Depth X 6-1/32 In Height (4)
  • Constructional Feature Rain Tight, Oil Tight;Enclosure Rating Class I Div 2 (7)
  • Continuous Thread (3)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (53)
  • Corrosion Resistant (67)
  • Corrosion Resistant;One-Piece Design with Machined Threads;Tapered Interior Seats the Bushing Evenly for a Liquidtight Seal (2)
  • Corrosion Resistant;Weatherproof;Rain Tight;Dust Tight (3)
  • Corrosion-resistant ideal for indoor and outdoor installations; Weatherproof, raintight and dust-tight when used with cast gasketed covers; Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock; Both malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit; Accurately tapped, tapered threads for tight, rigid joints, ground continuity; Internal grounding screws standard; Accommodate wiring devices such as switches and re (19)
  • Cover Openings on an Angle Permitting Conductors to be Pulled Straight Through Hubs from Either Direction;Domed Covers to Permit Easy Conductor Bends (Relieves Strain On Insulation);Cover and Gasket Furnished;Taper Tapped Hubs with Integral Bushings (4)
  • Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance. They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain. They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets. Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2; Class II, Div. 1 & 2; and C (5)
  • Design Load 200 Lb, Includes Combination Recess Hex Head Machine Screw (4)
  • Designed for both interior and exterior, universal aluminum mounting plates (15)
  • Designed for Both Interior and Exterior, Universal Aluminum Mounting Plates;Waterproof (3)
  • Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces (22)
  • Duplex, weatherproof protection, device mount, self-closing lids; installation hardware, gasket, and multi-lingual instructions included (3)
  • Ears (15)
  • Easier Installation, Greater Performance and Lower Installation Cost (2)
  • Easier Installation;Greater Performance and Lower Installation Cost (16)
  • Easy installation - No tools needed;Save time and money;Removable with a screwdriver (3)
  • Easy Installation;Removal, Reusable (2)
  • Easy to install (3)
  • Easy to Install;Quick Connect (3)
  • Easy, Push-In Installation (2)
  • Eliminates common connection problems and assures a liquidtight seal against oil, water, dirt and chemicals; The positive, pull out proof seal formed by a STNM connector begins with its deep-threaded ferrule that bites into the inner wall of the conduit; The sleeve separates the STNM series apart from ordinary connectors; The sleeve is held captive within a compression nut that allows it to move freely and self-align with the conduit having a slightly irregular surface or varying wall thickness; The nut ri (10)
  • Enclosure Type Class I Div 2;Constructional Feature Liquid Tight, Rain Tight, Oil Tight, Concrete Tight (2)
  • enhanced angled nails (3)
  • Enhanced Nails for Quick Mounting between Studs (3)
  • Excellent corrosion reisistance (12)
  • Excellent Corrosion Resistance (16)
  • Explosionproof, dust-ignitionproof; Malleable iron bodies have high tensile strength, ductility and provides great resistance to corrosion, impact and shock; Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity; Furnished with copperfree (4/10 of 1 PCT maximum) aluminum cover; Function as sealing fittings when used with sealing covers; Internally threaded body with externally threaded cover; Covers have pry notches for bar or wrench; Accommodate sealing, dome, hub and union (11)
  • Explosionproof, dust-ignitionproof; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity (8)
  • Explosionproof, dust-ignitionproof; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; Concentric ring interlocked design sizes makes possible smaller diameter, allowing use in tighter spaces; UNF unions are used for joining conduit and connecting conduit to enclosures, Facilitates modifications, permits removal of enclosures without turning or removal of conduit (3)
  • Explosionproof;Dust Ignitionproof;Rain Tight (19)
  • Explosionproof;Dust Ignitionproof;Rain Tight;Threaded Cover Openings;Smooth Integral Hub Bushing Protects Conductor Insulation When Pulling (25)
  • Explosionproof;Dust-Ignitionproof;Raintight (3)
  • Explosionproof;Dust-Ignitionproof;Smooth;Rounded Integral Bushing (5)
  • Extra Heavy-Duty Weatherproof Cover Withstand Electrical Device Protection (5)
  • Factory Provided Raised Ground Screw Location (7)
  • Features: Die-Cast Aluminum; Smooth, Corrosion-Resistant Electrostatic Powder Coating; Available Unassembled (Body Only) Or Assembled With Matching Steel Cover And Gasket; All 22-1/2 - 4 IN Conduit Bodies And All SLBs Come Assembled With Steel Cover And Gasket; Kits With Aluminum Covers Also Available; Cubic Capacity And Listings Clearly Marked; UL Listed (4)
  • Features: Die-Cast Aluminum; Smooth, Corrosion-Resistant Electrostatic Powder Coating; Available Unassembled (Body Only) Or Assembled With Matching Steel Cover And Gasket; All 22-1/2 - 4 IN Conduit Bodies And All SLBs Come Assembled With Steel Cover And Gasket; Kits With Aluminum Covers Also Available; Cubic Capacity And Listings Clearly Marked; UL Listed; Includes: Cover And Gasket (35)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: Excellent Pullout Resistance (2)
  • Features: Heavy Duty Die-Cast Zinc With Powder Finish; Blank Cover Is Stamped Aluminum; Die-Cast 1-3 Hole Covers Are UL Listed And CSA Approved; Meet All Federal Specifications; Round Covers Supplied With Gasket And Stainless Steel Mounting Screws; 3-Hole Cover Inc (3)
  • Features: Tapped Threads Back and Bottom (2)
  • Fixture Rated (12)
  • Fixture Rated;Made of Steel (9)
  • For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Di (8)
  • For Two-Hour Fire Rated Walls (5)
  • For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture; Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed; Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension on cable or cord; Steel or Teflon washer reduces friction between gromme (11)
  • For Use With 8-1/2 In X 4 In Sides Of Box (7)
  • Form 7 Condulet Outlet Bodies Approach Conduit in Size For Neat;Compact Installations;Orm 7 Has Exclusive Snaptight and Wedgenut Cover Attachment to Provide Clear;Unobstructed Cover Opening;Conduit Hubs Have Tapered Threads and Feature Integral Bushings (33)
  • Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws (6)
  • Furnished with 2-way Phillips/Slotted Head Screw (27)
  • Furnished with Tri-Drive screw (8)
  • Galvanized steel. 316 stainless steel screws. Natural finish. (5)
  • Gasket (4)
  • Gasketed for a watertight seal (3)
  • HCF (4)
  • Heavy duty die cast zinc, cord flap gasket (10)
  • Heavy Duty Die Cast Zinc, Cord Flap Gasket;Waterproof (14)
  • High Impact Resistant (4)
  • Holes between gangs are spaced on 1-3/16 inch centers (3)
  • Horizontal/Vertical Position (28)
  • Includes captivated Phillips head screws (7)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut (64)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut, With 316 Stainless Steel Hardware (6)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut;Two Piece Construction (17)
  • Includes gasketed cover (6)
  • Includes ground screw with pigtail lead (3)
  • Includes Sealing Washer;Bonds Conduit to Box or Enclosure;Corrosion Resistant Protection from Moisture & Oils;Designed to Protect Against Excessive Vibration (6)
  • Installed NM Cable Connector;Versatile (4)
  • Insulated Throat 105°C (2)
  • Insulator Rated 105 degree C (2)
  • Integral internal spring steel locking tabs fasten cable or conduit. Suitable for maintaining grounding continuity when installed in accordance with NEC. (3)
  • Intermateability UL Listed and CSA Certified interchangeability with competitive products. Suitable for wet locations when used with gaskets. Innovative spring clip design for installation ease and repeat usage. Smooth integral wire bushings protects cabl (22)
  • Kindorf Self Aligning Channel Nuts are Designed to Provide Resistance to Pull Out and Resistance to Side Slip in Excess of the Full Strength of the Channels with Which They are Used (3)
  • Kindorf Straps are Pre-Assembled for Easy Handling and Sorting (4)
  • Large Cable Clamping Range;Liquid Tight Mechanical Grip;Full Length Busing Seal Protects Cable;Extended Pull Out Performance;Corrosion Resistant (3)
  • Largest Wire Fill Capacity in their Class (3)
  • Liquid Tight and Water Tight Protection (6)
  • Liquid Tight;Oil Tight;Rain Tight;Water Tight (9)
  • Liquid Tight;Strain Relief (8)
  • Liquidtight fittings are used with metallic and non-metallic conduit to seal out water, oil, and dust in applications food processors, beverage & chemical plants, plastics fabricators, machine shops, etc. (16)
  • Listed for use with AC / AC90 / ACG90 / MC / MCI-A / HCFMCI-A / MC-PCS Cable*. cETLus Listed. (4)
  • Machine Tapped Device Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls (12)
  • Machine Tapped Device Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls & Ceilings (3)
  • Machine Tapped Device Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls and Ceilings (4)
  • Machine Tapped Fixture Holes;2 HR Fire Resistive Walls and Ceilings (2)
  • Machine Tapped Fixture Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls and Ceilings (3)
  • Made from 6063 alloy with a maximum Copper content of 0.1 PCT (4)
  • Made of Steel (35)
  • Made of Steel, Welded Construction (9)
  • Made of Steel. Drawn Construction (13)
  • Maximum Flexibility In Tight Applications (4)
  • Molded-In Splined Device Holes;2 HR Fire Resistive Walls (2)
  • Molded-In Splined Device Holes;2 HR Fire Resistive Walls & Ceilings (3)
  • Molded-In Splined Device Holes;2 HR Fire Resistive Walls and Ceilings (3)
  • More Accurate;Quicker to Install and More Economical, because they Save Field Bending Time (5)
  • NC Rolled Threads;Sizes Thru 4" Include Hex Nuts & Plate (3)
  • NEC/CEC - Suitable for use in the following Hazardous Locations:Class I, Division 2 per NEC 501.10(B)(4) (5)
  • Non-Armored Gland (7)
  • Non-Armored Gland, Cord Size 0.125 To 0.250 In (3)
  • Non-Armored Gland, Cord Size 0.875 To 1.000 In (3)
  • Non-Insulated (6)
  • Nylon Cord Connector Resists Most Common Industrial Corrosives;Provides Effective Pullout Protection;Lightweight Design (3)
  • Old Work Box with Quick Click (3)
  • One Hole Strap (3)
  • One Piece Break Apart Strut Clamp for EMT and Rigid Conduit;Includes Thread Impression and Captured Screw (8)
  • One size fits all strut depths (3)
  • One-piece, heavy-duty construction ready to install right out of the box, no need to break apart and reassemble, no screws or bolts to drop (7)
  • Ordinary, Wet, or Dry Locations;Extended Range with Superior Strain Relief (11)
  • O-Z/Gedney fittings are used with liquidtight flexible metal conduit to provide a dependable connection and are suitable for use in wet locations; 4Q fittings have plain throat (non-insulated); Used to secure, ground and seal liquidtight flexible metal conduit, Type LFMC, to boxes and enclosures; Hot dip or mechanically galvanized finish optionally available; Compact, slim diameter with small turning radius; Furnished with locknut and knockout sealing ring; Liquidtight/raintight/oiltight/concretetight; UL (3)
  • Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation (3)
  • Patented Quick-Fit(TM) Keyhole Mounting System Allows Installation in Under a Minute;Includes Attached Gasket and Mounting Hardware;Base Configuration with Patented Knock-Out(TM) Technology for Custom Fitting;Lockable Tab (2)
  • Polyethylene with Steel Retainer (7)
  • Provide strain relief to protect the cord or cable; Watertight/oiltight; UL listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub (7)
  • Provides an economical method of sleeving through (3)
  • Provides positive visual identification and can withstand the harshest environmental conditions. (2)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (30)
  • Provides Secure Cable Termination and Prevents Cable Pullout;Absorbs Longitudinal Stresses Placed on the Point of Termination Caused by Pulling or Bending the Cable;Supplied with Locknut, Nylon Insulated Bushing and Neoprene Gasket to Provide a Dirt and Dust Free Seal;Wide Range, Single Weave Mesh Construction (3)
  • Push-On Installation;No Tools (17)
  • PVC construction for easier installation, greater performance and lower installation cost (5)
  • Quick Installation, Cuts with Utility Knife or PVC Cutter (3)
  • Quick Thread Device Holes;2 HR Fire Resistive Walls (2)
  • Quick/Click Feature Secures Devices Quickly;Threaded Mounting Holes (3)
  • Raintight (7)
  • Raised Ground Screw Location in the Welded Boxes Saves time in Installation (12)
  • Redesigned BB38D Attaches 1/2" to 1" EMT or Flexible Conduit to Metal or Wood Studs;BB38 Attaches MC/AC Cable, 1/2" & 3/4" EMT to Metal or Wood Studs;Eliminates the Need for Offset Bending of Conduit;Aligns Conduit with Standard Box Knockouts;Box Depth 1-1/2 In;One Piece Construction (2)
  • Redesigned to Custom Fit Both 1-1/2 In. and 1-5/8 In. Channels (6)
  • Resists flexing and holds their shape even in the worst applications (3)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, & Common Solvents;Lower Installed Cost;Flammability Classification 94V-2;Temperature Index 125° C (6)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, and Common Solvents;Lower Installed Cost;Molded of Type Nylon 6. Flammability Classification 94v-2:Temperature Index 125°C (6)
  • Reusable;Easy tool-Free Installation (3)
  • Round neoprene gasket (4)
  • Rugged Construction protects Cord from Damage;Compact Design Permits close Spacing of Fittings on panel Applications;Tightening One Nut Creates Watertight Seal;Male Tapered Thread NPT (13)
  • Rugged, Durable Construction Protects Cords and Cables from Damage and Compact Design;Weatherproof Seal on Outer Sheath of Cable (28)
  • Screws concealed under doors (6)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (3)
  • Sealing Sleeves on All Conduit Openings;Superior Corrosion Protection (2)
  • Sealing Sleeves on Both Ends;Molded External Ribs On 1/2" - 4" to Prevent Tool Damage During Assembly;Couplings are Straight Tapped (5)
  • Seals out oil, water, dust, dirt and fumes; High corrosion resistance; Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements; Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground; Polypropylene sealing ring with locknut standard; Suitable for wet locations; Compact design with small turning radius (10)
  • Seals out oil, water, dust, dirt and fumes; High corrosion resistance; Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements; Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground; Polypropylene sealing ring with locknut standard; Suitable for wet locations; Compact design with small turning radius; Steel compression nut (3)
  • Seals out oil, water, dust, dirt and fumes; High corrosion resistance; Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements; Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground; Suitable for wet locations; Compact design with small turning radius; Copperfree (4/10 of 1 PCT of copper or less) aluminum; Full, machined tapered threads (NPT); Machine tool building, motor and transformer termination (4)
  • Seals Out Oil, Water, Dust, Dirt and Fumes;Unique Long Ferrule with More Pronounced Threads Provides Over Four Times Ul Pull-Out Requirements;Ferrule Provides Maximum Surface Contact for Better Sealing and a Continuous, Permanent, Positive Metal-To-Metal Ground;Liquidtight/Raintight/Oiltight;Compact Design with Small Turning Radius (3)
  • Self-closing (2)
  • Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers; Equivalent FM7 and Form 7 units have identical applic (72)
  • Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; High tensile strength and ductility, high corrosion resistance, high impact and shock resistance; Sizes with flat-back design ideal w (33)
  • Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Roomy interiors: more wiring space; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Form 85 copper free aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a h (4)
  • Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Roomy interiors: more wiring space; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Form 85 copperfree aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a hi (5)
  • Simplifying Installation, Reducing Inventory and Labor Costs;NEMA 4 Rated (7)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Easier Wire Pulling and More Room for Sp (2)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Form 35 Malleable Iron Unilets;High Tensile Strength and Ductility;High Corrosion-Resistant (7)
  • Standard closed mesh support grips are designed for loads up to 600 lbs. and vertical runs of no more than 100 ft. They are available in a variety of eye styles and cable ranges for supporting electrical and fiber optic cable, metal rods, and tubing. Closed mesh support grips are used when the end of the cable is accessible. Support grips are woven of corrosion-resistant tinned-bronze wire. (3)
  • Standard Product (27)
  • Strain relief grips (7)
  • Superblue Boxes Combine the Features of the Hard Shell Thermoset Box and the Thermoplastic PVC Style Box to Create a New Rigid Non-Metallic Wiring Box (2)
  • Supplied with Union Hubs, Which Makes it a Compact Assembly;Have a Variety of Hub Arrangements;Covers are Threaded;Mounting Straps are Standard on All Boxes (2)
  • Support grips (5)
  • Sweeping Bend Radius, Angled Cover (6)
  • Tamper resistant, rugged diecast cover, wood floors only (3)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 70 cu. in. (3)
  • The Maximum Number of Support and Framing Applications can be Constructed with a Minimum Amount of Labor and Pieces (25)
  • The metal body of zinc fittings bonds to the metal (3)
  • The Smooth Inner Surface Ensures that Cables and Conductors Can Be Fed Through Very Easily (4)
  • Threaded Hubs (17)
  • Threaded hubs (NPT). (4)
  • Three .5 in outlets, weatherproof protection; installation hardware, gasket, and multi-lingual instructions included, carded type packaging (3)
  • Two Screw Connector (2)
  • UL Listed for Fan and Fixture Support;Ground Screw Pre-Installed (6)
  • UL Listed for Fan and Fixture Support;Self-Leveling Feet (3)
  • Unique cover provides aesthetic recessed service (3)
  • Unique Wedge-Lok Clip Cover Design Allows Easy Removal Without Damaging The Conduit Body (3)
  • Various Types of Pulling, Support and Strain Relief Grips (3)
  • Vertical Position (5)
  • Vertical/Horizontal (3)
  • Watertight Fittings designed for indoor and outdoor applications (16)
  • Watertight Seal on Outer Sheath of Cable;Armoured and TECK Armoured Gland (5)
  • Watertight Seal on Outer Sheath of Cable;Armoured and TECK Armoured Gland and Non-Armoured Barrier (5)
  • Weatherproof (9)
  • Weatherproof NEMA 3R rated, 2 INes deep with lugs, five threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (11)
  • Weatherproof NEMA 3R rated, 2 INes deep with lugs, four threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (6)
  • Weatherproof NEMA 3R rated, 2 INes deep with lugs, seven threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (4)
  • Weatherproof NEMA 3R rated, 2 INes deep with lugs, three threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (5)
  • Weatherproof NEMA 3R rated, 2.625 INes deep with lugs, three threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (3)
  • Weatherproof NEMA 3R rated, 4 IN round splice box, cast in mounting lugs, five threaded outlets, four closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (4)
  • Wedge Nut Design Facilitates Installation and Removal;Nuts are Held Captive in Cover;Covers Can be Used with or without Gaskets;Form 7 Covers with Integral Sealing Gaskets are Installed Without the Use of Screws;Reducing Installation Time (22)
  • Wedge-Lok (3)
  • Wedge-Lok Cast Cover (4)
  • Weight 10 Lb per 100 (3)
  • Weight 18 Lb per 100 (3)
  • Weight 24 Lb per 100 (3)
  • Weight 392 Lb per 100 (5)
  • Weight 400 Lb per 100 (5)
  • Weight 46 Lb per 100 (5)
  • Weight 75 Lb per 100 (7)
  • Weight 76 Lb per 100 (4)
  • Weight 84 Lb per 100 (3)
  • Welded/Drawn Construction (6)
  • Width 1-5/8 In, Bolt Size 1/2 In (3)
  • Width 1-5/8 In, Bolt Size 3/8 In (3)
  • Width 1-5/8 In, Bolt Size 5/16 In (3)
  • With 1/2 And 21/32 IN Conduit Knockouts, Nonmetallic Sheathed CL 26 Cable Clamps (3)
  • With 14 To 4 AWG Aluminum Grounding Lug (20)
  • With 8 To 1/0 AWG Aluminum Grounding Lug (4)
  • With Cover (11)
  • With Cover and Neoprene Gasket (32)
  • With Cover, Cover Opening Diameter 2 In (8)
  • With Cover, Cover Opening Diameter 3 In (12)
  • With Cover, Cover Opening Diameter 3-5/8 In (5)
  • With Cover, Cover Opening Diameter 5 In (9)
  • With Drain, Vertical Position (31)
  • With Neoprene Integral Gasket (22)
  • With Weatherproof Horizontal Cover, Bug Plug (5)
  • Wood & Steel Stud Bracket Boxes with Quick Click (3)
  • Show More...

• Length

  

  • .88 (3)
  • 0.81 in;20.6 mm (4)
  • 0.872 in (2)
  • 0.88 in;22.4 mm (2)
  • 0.94 in;23.9 mm (2)
  • 1 (3)
  • 1 in (7)
  • 1.17 (3)
  • 1.18 (2)
  • 1.2 (2)
  • 1.2 in (2)
  • 1.250 in (4)
  • 1.31 in (3)
  • 1.338 in;33.99 mm (6)
  • 1.41 in (3)
  • 1.43 in (2)
  • 1.48 in (2)
  • 1.5 in (3)
  • 1.625 in (6)
  • 1.63 in (3)
  • 1/2 in (2)
  • 10 (17)
  • 10 A (9)
  • 10 ft (68)
  • 10 ft;3.05 m (4)
  • 10 INCH (34)
  • 10.2 (4)
  • 10.20 (2)
  • 10.20 in;259.1 mm (2)
  • 10.375 (2)
  • 10.5 (2)
  • 10.50 (5)
  • 10.56 (3)
  • 10.71 (6)
  • 101.6 mm (21)
  • 10-1/2 (8)
  • 10-1/32 (3)
  • 10-3/8 (4)
  • 11 (3)
  • 11.4 in (2)
  • 11.50 (5)
  • 11.875 (2)
  • 1-1/16 in (4)
  • 1-1/2 INCH (7)
  • 1-1/4 in (3)
  • 1-1/8 in (10)
  • 1-1/8 INCH (2)
  • 11-3/4 (2)
  • 12 (6)
  • 12 INCH (29)
  • 12.3 (3)
  • 12.4375 in (2)
  • 120 in (2)
  • 12-1/16 (2)
  • 1-21/32 in;42.1 mm (3)
  • 12-1/4 (3)
  • 12-11/16 (2)
  • 1-25/32 in (3)
  • 13.14 (4)
  • 13.60 (3)
  • 13.87 (3)
  • 1-3/4 in (6)
  • 1-3/4 INCH (3)
  • 1-3/8 in (4)
  • 1-3/8 in (Strap Center point Length) (2)
  • 1-3/8 INCH (2)
  • 13-1/2 (4)
  • 13-3/4 (3)
  • 15 (3)
  • 15.12 (2)
  • 15.45 (2)
  • 1-5/16 in (16)
  • 1-5/8 (4)
  • 1-5/8 in (4)
  • 1-5/8 INCH (2)
  • 15-5/8 (2)
  • 16.10 (2)
  • 1-7/8 in (3)
  • 1-7/8 in;47.6 mm (3)
  • 17-7/8 (4)
  • 1-9/16 in (3)
  • 2 A (6)
  • 2 in (13)
  • 2 INCH (25)
  • 2.03125 (2)
  • 2.063 in (5)
  • 2.25 in (2)
  • 2.375 in (3)
  • 2.376 in (4)
  • 2.625 in (Gland) (3)
  • 2.75 in (3)
  • 2.750 in (Gland) (2)
  • 2.781 (3)
  • 2.84375 (4)
  • 2.92 in;74.2 mm (2)
  • 20 (11)
  • 20 ft (16)
  • 21.5 in (2)
  • 2-1/2 in (4)
  • 2-1/2 INCH (10)
  • 2-1/4 in (6)
  • 2-1/8 in (3)
  • 2-23/32 in;69.1 mm (4)
  • 2-3/4 INCH (2)
  • 2-3/8 (4)
  • 2-3/8 in (7)
  • 2-5/16 in (6)
  • 2-5/8 in (3)
  • 2-5/8 INCH (2)
  • 2-7/8 INCH (2)
  • 3 (2)
  • 3 in (43)
  • 3 INCH (32)
  • 3.001 in (2)
  • 3.125 in (Gland) (2)
  • 3.126 in (2)
  • 3.438 in (3)
  • 3.5 in (6)
  • 3.688 (2)
  • 3.69 in;93.6 mm (2)
  • 3.69 in;93.7 mm (3)
  • 3.75 in (13)
  • 3.79 in (2)
  • 3/4 in (3)
  • 3-1/2 (8)
  • 3-1/2 in;88.9 mm (3)
  • 3-1/2 INCH (8)
  • 3-1/4 in (2)
  • 3-1/4 in;82.6 mm (5)
  • 31531 (7)
  • 3-3/4 in (14)
  • 3-3/4 in;95.3 mm (3)
  • 4 (5)
  • 4 in (92)
  • 4 in;101.5 mm (2)
  • 4 in;101.6 mm (24)
  • 4 INCH (41)
  • 4.125 round (5)
  • 4.25 in (9)
  • 4.31 (2)
  • 4.40 in;111.8 mm (2)
  • 4.5 (5)
  • 4.5 in (3)
  • 4.50 in (10)
  • 4.56 (6)
  • 4.5625 (3)
  • 4.5625 in (3)
  • 4.59 in (3)
  • 4.63 (3)
  • 4.63 in (10)
  • 4.655 (2)
  • 4.68 (8)
  • 4.82 in;122.4 mm (2)
  • 4.934 (3)
  • 4.937 (2)
  • 4-1/2 in;114.3 mm (3)
  • 4-1/8 in (5)
  • 4-11/16 in (10)
  • 4-11/16 in;119.063 mm (6)
  • 4-15/16 (3)
  • 4-5/8 (2)
  • 4-9/16 (3)
  • 5 (10)
  • 5 A (9)
  • 5 in (4)
  • 5 INCH (25)
  • 5.07 (2)
  • 5.07 in;128.8 mm (2)
  • 5.1875 in (4)
  • 5.19 (6)
  • 5.34 in (3)
  • 5.37 (3)
  • 5.37 in (4)
  • 5.38 (10)
  • 5.5 (3)
  • 5.5 in (2)
  • 5.625 in (2)
  • 5.63 (3)
  • 5.69 (2)
  • 5.75 (2)
  • 5.8 in (3)
  • 5.94 (3)
  • 5.94 in (2)
  • 5/8 in (3)
  • 5-1/2 in (4)
  • 5-1/4 (3)
  • 5-11/16 (4)
  • 5-11/16 in (4)
  • 5-13/16 in (3)
  • 51869 (9)
  • 5-3/16 (3)
  • 5-3/8 (7)
  • 5-3/8 in (2)
  • 5-9/16 (3)
  • 6 (24)
  • 6 in (18)
  • 6 in;152.4 mm (4)
  • 6 INCH (40)
  • 6.00 (5)
  • 6.2 in (3)
  • 6.20 (3)
  • 6.25 in (3)
  • 6.5 (3)
  • 6-1/2 (10)
  • 6-1/2 in (2)
  • 6-1/4 (15)
  • 6-1/8 in (3)
  • 6-15/32 (3)
  • 6-19/32 (2)
  • 6-3/32 (3)
  • 6-9/32 (4)
  • 7 (10)
  • 7 in (5)
  • 7.012 (3)
  • 7.05 (3)
  • 7.05 in (2)
  • 7.125 in (3)
  • 7.13 (8)
  • 7.25 in (5)
  • 7.44 (6)
  • 7.87 (5)
  • 7/8 in (3)
  • 7-1/2 in (3)
  • 7-1/4 (7)
  • 7-1/4 in (2)
  • 7-1/4 in;184.1 mm (2)
  • 7-1/8 (4)
  • 7-1/8" (2)
  • 7-3/4 (3)
  • 7-5/16 (5)
  • 7-5/8 in (2)
  • 7-7/16 (3)
  • 798 (10)
  • 8 (8)
  • 8 Each (9)
  • 8 INCH (28)
  • 8.12 (5)
  • 8.12 in (4)
  • 8.125 in (3)
  • 8.13 (6)
  • 8.1875 in (4)
  • 8.19 (12)
  • 8.45 (8)
  • 8-1/8 (3)
  • 8-3/16 (3)
  • 9.00 (10)
  • 9.1875 in (3)
  • 9.19 (8)
  • 9-1/8 (3)
  • 9-3/16 (5)
  • Show More...

• Width

  

  • 0.25 (7)
  • 0.5 (3)
  • 0.625 (2)
  • 0.75 in (3)
  • 0.785 in;19.9 mm (7)
  • 0.827 IN (2)
  • 1 in (6)
  • 1.053 IN (2)
  • 1.31 (5)
  • 1.31 in;33.3 mm (2)
  • 1.338 in;33.99 mm (3)
  • 1.34 (2)
  • 1.34 in (3)
  • 1.375 (2)
  • 1.375 in (4)
  • 1.38 (2)
  • 1.38 in (2)
  • 1.5 (6)
  • 1.5 in (9)
  • 1.53 in (2)
  • 1.53 in;38.9 mm (2)
  • 1.56 (4)
  • 1.56 in (3)
  • 1.575 IN (2)
  • 1.625 (45)
  • 1.625 in (7)
  • 1.64 in (2)
  • 1.7 in (2)
  • 1.74 (2)
  • 1.75 (3)
  • 1.75 in (3)
  • 1.8 in (2)
  • 1.80 (2)
  • 1.81 (3)
  • 1.812 (2)
  • 1.88 (2)
  • 1.9 (1)
  • 1.9 in (4)
  • 101.6 mm (21)
  • 11 (3)
  • 1-1/2 in (5)
  • 1-1/4 in (10)
  • 1-1/8 (2)
  • 1-13/16 in (3)
  • 1-15/16 in (7)
  • 119.063 mm (2)
  • 12-1/4 (2)
  • 1-3/16 in (1)
  • 13/16 in;20.6 mm (1)
  • 1-3/4 (13)
  • 1-3/4 in (2)
  • 1-3/8 (6)
  • 14-1/16 (2)
  • 1-5/8 (2)
  • 1-5/8 in (54)
  • 1-5/8 in;41.3 mm (4)
  • 1-5/8 INCH (7)
  • 17 (4)
  • 1-7/8 in (2)
  • 1-9/16 (9)
  • 2 (24)
  • 2 in (41)
  • 2.04 in (2)
  • 2.044 (1)
  • 2.05 (8)
  • 2.06 (3)
  • 2.06 in;52.2 mm (2)
  • 2.06 in;52.3 mm (3)
  • 2.097 (1)
  • 2.106 IN (2)
  • 2.125 in (5)
  • 2.15 (3)
  • 2.1875 in (2)
  • 2.19 (5)
  • 2.25 (10)
  • 2.25 in (15)
  • 2.25 in;57 mm (2)
  • 2.25 in;57.2 mm (1)
  • 2.26 in;57.3 mm (1)
  • 2.28 in (3)
  • 2.30 in;58.4 mm (1)
  • 2.375 (2)
  • 2.4375 in (3)
  • 2.44 (9)
  • 2.49 (9)
  • 2.49 in;63.2 mm (2)
  • 2.5 (3)
  • 2.56 (4)
  • 2.5625 in (3)
  • 2.6 in (3)
  • 2.60 (5)
  • 2.625 (2)
  • 2.63 (3)
  • 2.65 (4)
  • 2.67 (2)
  • 2.68 (2)
  • 2.75 (10)
  • 2.75 in (8)
  • 2.781 (3)
  • 2.805000000000000 (3)
  • 2.81 in (2)
  • 2.810000000000000 (13)
  • 2.82 in (3)
  • 2.83 (3)
  • 2.83 in (2)
  • 2.844 (4)
  • 2.850 (2)
  • 2.86 in (9)
  • 2.865000000000000 (2)
  • 2.87 (2)
  • 2.88 (4)
  • 2.9 in;73.7 mm (1)
  • 2.92 in;74 mm (1)
  • 2.93 (2)
  • 2-1/2 (3)
  • 2-1/2 in (5)
  • 2-1/4 (2)
  • 2-1/4 INCH (3)
  • 2-1/8 in (24)
  • 2-1/8 in (Box) (5)
  • 2-27/32 in (1)
  • 2-3/16 (8)
  • 2-3/4 (7)
  • 2-3/4 in (2)
  • 2-3/8 (4)
  • 2-3/8 in (3)
  • 2-3/8 INCH (4)
  • 24 (3)
  • 2-5/16 (3)
  • 2-5/16 in (4)
  • 2-5/32 (3)
  • 2-5/8 (7)
  • 2-7/16 (6)
  • 2-7/16 in (3)
  • 2-7/8 (2)
  • 3 (25)
  • 3 in (15)
  • 3 in;7.62 cm (2)
  • 3 in;76.2 mm (1)
  • 3.00 (2)
  • 3.1 (2)
  • 3.10 (3)
  • 3.12 (3)
  • 3.12 in (2)
  • 3.125 in (3)
  • 3.13 (2)
  • 3.19 (6)
  • 3.31 (1)
  • 3.48 (2)
  • 3.5 (20)
  • 3.5 in (3)
  • 3.50 (5)
  • 3.51 in (3)
  • 3.53 in;89.7 mm (2)
  • 3.56 (2)
  • 3.65 (2)
  • 3.69 in;93.6 mm (2)
  • 3.750 in (2)
  • 3.83 (6)
  • 3.83 in (2)
  • 3/8 (4)
  • 3-1/16 in (2)
  • 3-1/2 (5)
  • 3-1/2 in (17)
  • 3-1/2 in;88.9 mm (4)
  • 3-1/4 (4)
  • 3-1/4 in (6)
  • 3-11/16 in;93.6 mm (1)
  • 3-3/16 (3)
  • 3-3/16 in (1)
  • 3-3/4 (6)
  • 3-5/8 in;92.075 mm (1)
  • 3-7/16 (3)
  • 3-7/16 in (2)
  • 3-9/16 (3)
  • 3-9/16 in (14)
  • 4 (37)
  • 4 in (58)
  • 4 in;101.5 mm (2)
  • 4 in;101.6 mm (23)
  • 4 INCH (6)
  • 4.000000000000000 (4)
  • 4.02 (2)
  • 4.020 (2)
  • 4.06 (4)
  • 4.100 (2)
  • 4.12 (5)
  • 4.125 (7)
  • 4.13 (3)
  • 4.17 (3)
  • 4.19 (2)
  • 4.203000000000000 (5)
  • 4.31 (2)
  • 4.31 in (2)
  • 4.44 in (2)
  • 4.5 (8)
  • 4.5 in (3)
  • 4.50 (2)
  • 4.50 in (8)
  • 4.500000000000000 (15)
  • 4.563 (3)
  • 4.625 in (2)
  • 4.688 (3)
  • 4.69 (3)
  • 4.71 (2)
  • 4.802 (2)
  • 4.934 (2)
  • 4-1/2 in (2)
  • 4-1/2 in;114.3 mm (1)
  • 4-1/4 (7)
  • 4-1/8 (9)
  • 4-1/8 in (4)
  • 4-11/16 (5)
  • 4-11/16 in (10)
  • 4-11/16 in;119.063 mm (6)
  • 4-5/8 in (2)
  • 5 (13)
  • 5 in (2)
  • 5.00 (1)
  • 5.12 in (2)
  • 5.16 in (2)
  • 5.1875 in (1)
  • 5.42 (6)
  • 5.5 (2)
  • 5.700 in (2)
  • 5.71 (3)
  • 5.75 (4)
  • 5.750 in (2)
  • 5.87 (3)
  • 5/8 in (1)
  • 5-1/4 (3)
  • 5-3/4 (7)
  • 5-3/4 in (9)
  • 5-5/8 in (3)
  • 6 (7)
  • 6 in (Base);3-5/16 (Post) in (1)
  • 6 in;152.4 mm (5)
  • 6.05 (2)
  • 6.156 in (2)
  • 6.40 (2)
  • 6.625 (2)
  • 6-1/4 (2)
  • 6-15/16 (2)
  • 7.186 (2)
  • 7.21 (1)
  • 7.375 (2)
  • 7-1/8 (2)
  • 9 in (2)
  • 9.058 (3)
  • 9-5/16 Inch (2)
  • Show More...

• Height

  

  • 0.238 in;6.1 mm (3)
  • 0.259 IN (2)
  • 0.299 IN (2)
  • 0.312 (2)
  • 0.35 in (2)
  • 0.358 in;9.1 mm (4)
  • 0.461 IN (2)
  • 0.55 in;13.97 mm (1)
  • 0.673 in;17.1 mm (2)
  • 0.75 (1)
  • 1 (9)
  • 1 in (4)
  • 1.250 in (2)
  • 1.31 (1)
  • 1.34 (2)
  • 1.37 (5)
  • 1.375 (2)
  • 1.38 (3)
  • 1.40 (3)
  • 1.5 in (6)
  • 1.50 (2)
  • 1.6 in;40.5 mm (1)
  • 1.63 (3)
  • 1.64 (2)
  • 1.64 in;41.7 mm (3)
  • 1.69 (2)
  • 1.70 (4)
  • 1.8 in (1)
  • 1.80 (2)
  • 1.825 in (2)
  • 1.88 (4)
  • 1.88 in;47.8 mm (3)
  • 1.90 (5)
  • 1.97 (2)
  • 1/2 in (21)
  • 1/2 in;12.7 mm (13)
  • 10-1/8 in (2)
  • 1-1/2 (2)
  • 1-1/2 in (31)
  • 1-1/2 in;38.1 mm (15)
  • 1-1/2;38.1 mm (1)
  • 1-1/4 in (2)
  • 1-11/16 (3)
  • 1-13/16 in (3)
  • 1-15/16 (3)
  • 11-7/8 (2)
  • 12 (3)
  • 13/16 in (6)
  • 13/16 in;20.6 mm (1)
  • 13/16 INCH (4)
  • 1-3/4 (8)
  • 1-3/8 (4)
  • 1-5/8 (7)
  • 1-5/8 in (22)
  • 1-5/8 in;41.3 mm (8)
  • 1-5/8 INCH (2)
  • 16 ga (Thickness) (2)
  • 1-7/16 (2)
  • 1-7/8 (10)
  • 1-7/8 in (6)
  • 18 (2)
  • 2 (24)
  • 2 in (16)
  • 2.02 (2)
  • 2.05 (3)
  • 2.05 in (2)
  • 2.09 in (9)
  • 2.14 (3)
  • 2.1875 in (2)
  • 2.24 in (8)
  • 2.25 (10)
  • 2.25 in (5)
  • 2.28 in (1)
  • 2.30 in;58.4 mm (1)
  • 2.31 (5)
  • 2.31 in (2)
  • 2.32 (2)
  • 2.33 (2)
  • 2.4 in;61 mm (1)
  • 2.4375 in (3)
  • 2.5 (5)
  • 2.55 in;64.9 mm (1)
  • 2.56 (7)
  • 2.60 (5)
  • 2.625 (1)
  • 2.625 in (2)
  • 2.63 (2)
  • 2.65 (2)
  • 2.65 in (4)
  • 2.7 in;68.6 mm (1)
  • 2.71 in (4)
  • 2.73 (5)
  • 2.74 in;69.5 mm (1)
  • 2.74 in;69.7 mm (1)
  • 2.75 (11)
  • 2.75 in (5)
  • 2.78 in;70.7 mm (1)
  • 2.813 (4)
  • 2.83 (5)
  • 2.83 in;71.8 mm (1)
  • 2.85 (4)
  • 2.87 in (8)
  • 2.875 in (2)
  • 2.88 (4)
  • 2.89 in (1)
  • 2.9 (3)
  • 2.97 (8)
  • 2.98 in;75.6 mm (2)
  • 2-1/2 (2)
  • 2-1/2 in (18)
  • 2-1/4 (6)
  • 2-1/4 in (8)
  • 2-1/8 in (24)
  • 2-1/8 in;53.975 mm (6)
  • 2-1/8;53.975 mm (4)
  • 2-11/16 (2)
  • 2-13/32 (2)
  • 2-15/16 in (1)
  • 218 mm (1)
  • 2-25/32 (4)
  • 2-27/32 (2)
  • 2-3/4 (5)
  • 2-3/4 in (8)
  • 24 (2)
  • 2-5/16 (5)
  • 2-5/16 in (6)
  • 2-5/16 in;58.7 mm (1)
  • 2-5/16 in;74.5998 mm (1)
  • 2-7/16 (2)
  • 2-7/8 (3)
  • 2-9/16 (5)
  • 3 (17)
  • 3 in (4)
  • 3 INCH (3)
  • 3.04 in;77.2 mm (1)
  • 3.05 (1)
  • 3.12 (2)
  • 3.13 (5)
  • 3.18 in;80.6 mm (1)
  • 3.25 (3)
  • 3.26 in;82.9 mm (1)
  • 3.31 (6)
  • 3.32 in;84.3 mm (1)
  • 3.38 (3)
  • 3.41 (3)
  • 3.41 in (2)
  • 3.45 in;87.7 mm (1)
  • 3.5 (6)
  • 3.5 in (7)
  • 3.5 in;88.9 mm (1)
  • 3.50 in;88.9 mm (1)
  • 3.55 (1)
  • 3.5625 in (3)
  • 3.59 in;91.2 mm (1)
  • 3.63 (2)
  • 3.65 (5)
  • 3.69 (2)
  • 3.69 in;93.7 mm (1)
  • 3.7 in (2)
  • 3.72 in (2)
  • 3.725 (2)
  • 3.738 (3)
  • 3.74 in (2)
  • 3.75 (2)
  • 3.775 (2)
  • 3.88 (2)
  • 3.90 (3)
  • 3/4 in (4)
  • 3-1/2 (3)
  • 3-1/2 in (17)
  • 3-1/2 in (Post) (1)
  • 3-1/2 in;88.9 mm (5)
  • 3-1/4 (5)
  • 3-1/4 in (6)
  • 3-1/4 in;8.25 cm (2)
  • 3-1/4 in;82.5 mm (1)
  • 3-1/4 INCH (7)
  • 3-1/8 (6)
  • 3-11/16 in;93.6498 mm (1)
  • 3-11/16 INCH (2)
  • 3-11/32 (2)
  • 3-13/16 in (6)
  • 3-15/16 in;100 mm (1)
  • 3-15/32 (2)
  • 3-3/16 (2)
  • 3-3/4 (6)
  • 3-3/4 in (29)
  • 3-3/4 in;95.25 mm (1)
  • 3-3/4 INCH (6)
  • 3-3/8 in;85.7 mm (1)
  • 3-5/16 (2)
  • 3-5/8 in;92.075 mm (2)
  • 3-7/16 (3)
  • 3-7/16 in;87.3 mm (1)
  • 3-9/16 (4)
  • 4 (27)
  • 4 in (6)
  • 4 in (Box) (5)
  • 4 INCH (5)
  • 4.00 (2)
  • 4.12 (2)
  • 4.125 (7)
  • 4.125 in (2)
  • 4.17 (3)
  • 4.25 (2)
  • 4.31 (2)
  • 4.5 (4)
  • 4.531 (3)
  • 4.594 (4)
  • 4.64 (1)
  • 4.65 (2)
  • 4.655 in (2)
  • 4.75 (6)
  • 4.84 (2)
  • 4.934 in (2)
  • 4-1/16 in (4)
  • 4-1/32 (2)
  • 4-1/8 in (4)
  • 4-1/8 in;104.8 mm (1)
  • 4-11/16 (7)
  • 4-13/16 (4)
  • 4-3/8 (8)
  • 5 (3)
  • 5.36 (2)
  • 5.375 (2)
  • 5.40 (2)
  • 5.43 (4)
  • 5.4375 in (2)
  • 5.5 (5)
  • 5.54 in (4)
  • 5.62 (2)
  • 5.700 in (2)
  • 5.75 (3)
  • 5.750 in (2)
  • 5.88 in (2)
  • 5/8 in (2)
  • 5-3/4 in (1)
  • 5-3/8 (3)
  • 5-3/8 in;136.5 mm (2)
  • 5-5/8 (4)
  • 5-7/8 (2)
  • 6 (3)
  • 6 in (2)
  • 6.03 in (3)
  • 6.11 (2)
  • 6.12 in (2)
  • 6.437 in (2)
  • 6-1/2 (2)
  • 6-1/2 in (3)
  • 6-1/8 (2)
  • Show More...

• Includes

  

  • (2) Pins (1)
  • (2) Screw (12)
  • Armored Cable (AC)/Metal Clad Cable (MCI, MCI-A, MCC)/Flexible Metal Conduit Clamp (1)
  • Attached Gasket;Mounting Hardware (1)
  • Attached Nails (1)
  • Built-In Roller (3)
  • Captivated Phillips Head Screws (6)
  • Clamp (9)
  • Closure Plug;Ground Screw;Mounting Hardware (11)
  • Cover (27)
  • Cover and Gasket (4)
  • Cover and Gasket Set (1)
  • Cover;Gasket (1)
  • Cover;Nut;Sleeve (2)
  • Entrance Cap (1)
  • FLG3 Wire Hanger;0.080" Galvanized Braided Wire - Toggles (1)
  • Gasket (1)
  • Gasket and Mounting Hardware (2)
  • Gasket;Mounting Hardware (12)
  • Gasket;Mounting Hardware;Installation Instructions (3)
  • Ground Screw (5)
  • Grounding Screw;O-Ring;Cover (1)
  • Inside Pocket (1)
  • Installation Instruction (2)
  • Insulated Bushing (3)
  • Integral Gasket (7)
  • Integral Sealing Gasket;Stainless Steel Screw (3)
  • Internal Ground Screw (2)
  • Internal Ground Screw and O-Ring (1)
  • Neoprene Bushing (13)
  • Neoprene Gasket;Cover;Screws (1)
  • Neoprene O-Ring (4)
  • Non-Metallic Sheathed Cable Clamp (2)
  • Nuts;Screws (11)
  • Screw (1)
  • Set Screw;Locknet (1)
  • Stainless Steel Fastening Screw (5)
  • Stainless Steel Screw (43)
  • Stainless Steel Screw;Nylon Washers and Gasket (7)
  • Stainless Steel Screws (3)
  • Standard Neoprene Bushing (28)
  • Steel Clip (1)
  • Terminal Adapter (1)
  • Show More...

• For Use With

  

  • (2) 0.485 to 0.612 in Cable (1)
  • 0.405 to .610 AC90, ACG90 Cable;Flexible Metal Conduit (1)
  • 0.405 to 0.610 in Steel and Aluminum:MC/HCF/AC NEW MC-PCS MC-PCS HCF, MCI-A, AC90, ACG90 (1)
  • 0.45 to 0.612 in Cable (2)
  • 0.485 to 0.612 in Cable (1)
  • 0.590 to 0.780 in MC/HCF/AC/MC-PCS Cable;0.610 to 0.780 in MCI-A Cable;0.650 to 0.850 in AC90, ACG90 Cable (1)
  • 1/2" and 3/4" Conduit (1)
  • 1-1/4 to 3 in Pipe (1)
  • 14/2 to 10/3 AWG (0.40 in to 0.63 in) Aluminum and Steel AC/MC/MCI-A/HCF;3/8 in Aluminum and Steel FMC/RWFMC (1)
  • 14/2;14/3;12/2 AWG Cable Wire Insulation (1)
  • 16 to 24 in Spans (2)
  • 16 to 24 in Spans;Standard Octagon Electrical Box (1)
  • 16-in-1 Custom Device (1)
  • 18in1 Extra Duty Box (1)
  • 21 Series III/23 Series III/26 Series III/27/51 Series Ii/52 Series Ii/53 Series Ii/54 Series Ii/70 Series III/73 Series III/75 Series III/77 Series III/79 Series III/80 Series III/89 Series Iv/180 Series/712/713/714/715/716/717/725/787/8060a/8062a Conduit Body (1)
  • 3/8 in Wall Board and Plaster;1/2 in Wall Board and Plaster;5/8 in Wall Board and Plaster (2)
  • 4 in Round/Octagonal Box (1)
  • 4 in Square Box Partitions (15)
  • 4 in Square Boxes (1)
  • 4 in Square Electrical Box (1)
  • 4 in Square Outlet Box;One 30 or 50 Amp Dryer;Range Receptacle (1)
  • 4 in Square Outlet Box;One 4-Wire Twist-Lock Single Receptacle (1)
  • 4 in Square Outlet Box;One Duplex Flush Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle and One Duplex Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle and One Toggle Switch (1)
  • 4 in Square Outlet Box;One Single Flush Receptacle (1)
  • 4 in Square Outlet Box;One Toggle Switch (1)
  • 4 in Square Outlet Box;One Toggle Switch and One Duplex Flush Receptacle (1)
  • 4 in Square Outlet Box;Two Duplex Flush Receptacles (1)
  • 4 in Square Outlet Box;Two Ground Fault Receptacles (1)
  • 4 in Square Outlet Box;Two Toggle Switches (1)
  • 4 in. Square and 4-11/16 in. Boxes;1-1/2 in. and 2-1/8 in. Deep (1)
  • 45in1 Extra Duty Box (1)
  • 4-Wire Twist-Lock Single Flush Receptacle (1)
  • 55-in-1 Custom Device (1)
  • 68 and 600 Series Floor Boxes (1)
  • 68 P Floor Box (3)
  • 829PFLRT Cover (1)
  • 880MP Series Rectangular Floor Box (1)
  • 880mp2/880mp Series Rectangular Non Metallic Floor Box (1)
  • 881 Series Round Floor Box (1)
  • 881 Series Round PVC Floor Box (2)
  • A and C Series Channel and Inserts (5)
  • A-1200 & A-1400 Series Channel (1)
  • A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (1)
  • A-1200, B-1200, C-1200, A-1400, B-1400 and B-1402 Series Channels (1)
  • A-1202, A-1402, C-1202 and H-1200 Series Channel (1)
  • AC/MC Cable (10)
  • AC/MC/HCF Cable 10/4 AWG(0.61 in) to 8/3 AWG (0.87 in) (1)
  • AC/MC/MCI-A 14/2 AWG (0.375 in) to 10/3 AWG (0.625 in) HCF/HCFMCI-A 3/8 in FMC and 14/2 to 10/3 AWG NM Cable (1)
  • Adjustable Single and Double Gang Mud Rings (2)
  • Air Plenum (11)
  • Air Plenum;Extension with Switch Box (2)
  • All Kind or F Channels (1)
  • All Standard Devices;Switches;GFCIs;Single Gang Set Back Electrical Box (1)
  • Aluminum and Steel Flex, AC, AC90, MCI, MCI-A Cable (1)
  • Aluminum and Steel Flex, AC, AC90, MCI, MCI-A Cable;HCF Steel and Aluminum Cable (4)
  • Aluminum Interlocking Grounding Metal-Clad Cable (13)
  • Areas Where Physical Damage May Occur (1)
  • B 900;B 905;B 906 and B 907 Series Channel (1)
  • B Series Channel and Inserts (1)
  • B-1400 Series Channel (1)
  • B22 (2)
  • B22 & B24 Channel (2)
  • B22 or B52A (1)
  • B22-A, B, C (2)
  • B52 & B54 Channel (1)
  • Box On Plywood;T-111;Other Flat Surfaces (1)
  • Branch Circuit Wiring for Wet Locations;Damp Locations;Dry Locations (1)
  • Cable Support (1)
  • Cable Tray (7)
  • Carflex Conduit and Carflex X-Flex Conduit (3)
  • Channel 1-5/8 in (41.3 mm) Height (1)
  • Circuit Wiring (29)
  • Class 2 Wiring of Satellite;Cable TV;Speakers and More (1)
  • Commercial;Residential;Wood Floors (2)
  • Concrete Box (1)
  • Conduit (58)
  • Conduit Outlet Body (7)
  • Conduit Runs (1)
  • Conduit System (18)
  • Condulet(R) Conduit Body (23)
  • Connect AC/MC/MCI-A/NM-B Cable to Box or Enclosure;12/2 AWG(0.44 in) to 10/3 AWG (0.53 in) For use with HCF/HCFMCI-A (1)
  • Connect MC &AC or 3/8 in Flexible Metal Conduit to box or enclosure;14/2 AWG (0.38 in) to 10/3 AWG (0.61 in)AC/MC/MCI-A/HCF/HCFMCIA (1)
  • Connect Single Round Service Entrance Cable to Box or Enclosure (5)
  • Connecting 14/2 AWG (0.38 in) to 10/3 (.53 in) Armored;Metal Clad Cable to Box or Enclosure MC/MCI-A/HCFMCI-A (1)
  • Connecting Nonmetallic Cable to Box or Enclosure (6)
  • Couple Threaded Rod (1)
  • Display Receptacle (2)
  • Dry Locations;Concrete Tight when Taped (3)
  • Dry-Tite Boxes and Covers Protect Wiring Devices;Switches;Electronic Components and Terminal Blocks in Dry, Damp and Wet Locations (2)
  • Drywall (1)
  • Duplex Flush Receptacle with Spring Cover Mounting BOX (1)
  • Duplex Receptacle (1)
  • Electric Boxes (1)
  • Electrical Box (1)
  • Electrical Box;Siding Block;Bubble Cover Assembly (1)
  • Electrical Boxes (1)
  • Electrical Devices (8)
  • Electrical Non-Metallic Tubing (EMT) or Non-Metallic Sheathed Cable (1)
  • EMT Conduit (4)
  • EMT Conduit;IMC Conduit;Rigid Conduit (4)
  • EMT Conduit;Threaded Rigid and IMC Conduit (1)
  • EMT/Rigid Conduit (8)
  • Fan and Fixture Support (9)
  • Flbc4502 Floor Box (1)
  • Flexible Cord or Bus Drop Cable at Bus Duct (2)
  • Flexible Cords Including Type S, SO, STO, ST, SJ, SJT, SJTO and SVO, Tray Cable Types TC, TC-ER, TC-ER-HLA, ITC, ITC-ER, ITC-HL, PLTC and PLTC-ER Cables Steel/Copper Wire Braided Cable Steel Wire Armoured (28)
  • Flexible Metal Conduit (14)
  • Flexible Metal Conduit;12/3 to 10/3 steel or aluminum MC cable (2)
  • Flexible Type Neoprene;Hypalon and PVC Jacketed Power or Control Cord and Cable (8)
  • Floor Box (6)
  • FM7 Unilet Conduit Outlet Bodies (1)
  • For 4 in x 2-1/8 in Boxes (4)
  • For Insulated Cable (3)
  • Form35(R) Unilet(R) Conduit Outlet Body (5)
  • Gang Box (2)
  • General Control and Power Cable Applications (2)
  • General Use Snap Switches;Rigid Conduit Body (1)
  • H-132, H-134 Stainless Steel Channel (2)
  • Hazardous Area;Wet Location (25)
  • Hazardous Areas (3)
  • HVAC Equipment (4)
  • Inspection;Pulling and Maintenance (5)
  • Instance Phone;Cable TV;Satellite Dish (1)
  • Interior and Exterior;Gasket to Boxes and Covers (1)
  • Interior and Exterior;Universal Aluminum Mounting Plates (3)
  • In-Wall Use;In-Ceiling Use for Supporting Weights up to up to 6 lbs (1)
  • Jacketed Metal Clad Cable (1)
  • Kind or F Channels (2)
  • Liquid Tight Flexible Metal Conduit (20)
  • Liquidtight Conduit (6)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (3)
  • Liquidtight Flexible Metallic Conduit (42)
  • Liquid-Tight Flexible Metallic Conduit (33)
  • Liquidtight Flexible Non-Metallic Conduit (1)
  • Liquidtight Flexible Non-Metallic Conduit Type A (5)
  • Manual Motor Starter (1)
  • Masonry Box (2)
  • Masonry Wall (4)
  • MC Cable;Fasteners;Stud/Box Fasteners (1)
  • MC/AC Cable (1)
  • Metal-Clad Cable (6)
  • Metal-Clad Cable;Non-Armoured and Tray Cable (4)
  • Metallic and Non-Metallic "Type B" Liquid Tight Conduit (14)
  • Metallic Connectors (3)
  • Metallic or Nonmetallic Electrical Boxes (2)
  • Metallic Outlet Box (25)
  • Mounting Old Work Switch Boxes in All Types of Wall Materials (1)
  • New and Old Work (5)
  • New Concrete (3)
  • New Stucco Over masonry or Wood Construction (1)
  • NM Cable (3)
  • NM Sheathed Cable (1)
  • Non-Metallic "type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut (1)
  • Non-Metallic Cable (4)
  • Non-Metallic Liquid-Tight Conduit (7)
  • Non-Metallic Liquid-Tight Conduit, Type B Only (4)
  • Nonmetallic Sheathed Cable (1)
  • Non-Metallic Sheathed Cable (55)
  • Non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code (1)
  • Non-Metallic Wiring System (3)
  • On Grade/Below Grade Application;Power;Data;Communications (2)
  • One 20 A Single Receptacle (1)
  • One 30 or 50 Amp Dryer;Range Receptacle (1)
  • One 30 to 50 A Receptacle (1)
  • One 30 to 60 A Receptacle (1)
  • One Duplex Receptacle (1)
  • One Duplex Receptacle;One GFCI Receptacle (1)
  • One Gang Utility Box (5)
  • One GFCI Receptacle (1)
  • One Single Receptacle (1)
  • One Toggle Switch (1)
  • One Toggle Switch;One Duplex Receptacle (1)
  • One Toggle Switch;One GFCI Receptacle (1)
  • Outlet Box (1)
  • Oval Service Entrance Cable;Nonmetallic Sheathed Cable (1)
  • Pipe Conduit (16)
  • Pipe Size 1 in (1)
  • Pipe Size 2 in (1)
  • Pipe Size 3 in (1)
  • Pipe, Conduit, Duct and Cable Tray Around Obstructions (2)
  • Pipe/Rigid Conduit (1)
  • Plaster (3)
  • Portable Cord (6)
  • Portable Cords including S, SO, STO, ST, SJ, SJT, SJTO and SVO (13)
  • Power and Communication Grounding Systems (3)
  • Power or Communications and Data (1)
  • Protection of Electrical;Voice;Data and Video Cables (1)
  • Receptacle (2)
  • Residential;Home Office (1)
  • Retrofit Projects Such as Trapeze Installations;Where Disassembly of the Support System is not Desired (1)
  • Rigid and IMC Conduit to Mounting Surface (1)
  • Rigid Conduit (104)
  • Rigid Conduit and Pipe (1)
  • Rigid Conduit Body (41)
  • Rigid Conduit;IMC Conduit (19)
  • Rigid Steel;Rigid Aluminum and IMC Conduit (9)
  • Rigid Steel;Rigid Aluminum;IMC Conduit (4)
  • Rigid/Imc Conduit (29)
  • Rigid/IMC Conduit;Heavy-Duty Conductors;Pulling Large Conductors;Making Splices and Taps (1)
  • Rigid/IMC Conduit;Pipe and Electric Metal Tubing (17)
  • Rigid/IMC/EMT Conduit (4)
  • Rigid;IMC and EMT conduit (1)
  • Round Floor Box Covers (1)
  • Seals Sections of Conduit Runs from Passage of Vapors;Flame and Gases (1)
  • Sectons (1)
  • Secure and Seal Cords or Cables Entering Enclosures or Race-Ways (1)
  • Series 2, 3, 4, 5 Steel Channel (1)
  • Service Entrance Mast (2)
  • Single Receptacle (1)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/2 AWG (0.475 in) to 12/2 AWG (0.525 AWG) (1)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/3 AWG (0.540 in) to 12/3 AWG (0.590 AWG) (1)
  • Square Boxes (27)
  • Squeeze Connectors Will Fit Every Size of Armored Cable, Leaded Cable and Flexible Conduit;Armored Cable and Flexible Metal Conduit (1)
  • Steel Octagon Box (3)
  • Support Metal Clad Cable (1)
  • Supporting AC/MC/FMC;Accomodates Steel and Aluminum AC/MC/FMC;AC/MC/MCIA with an Outer Diameter of 0.425 in (14/2 AWG) to 0.61 in (10/3 AWG) in FMC in 3/8 in Trade Size (1)
  • Supporting Electrical and Fiber Optic Cable;Metal Rods;and Tubing (1)
  • Supports fixtures up to 50 lbs (1)
  • Switches;Receptacles;Fans;Lights (3)
  • Thin Wall (EMT), IMC, Rigid Conduit or Pipe (6)
  • Threaded Fittings Only (5)
  • Threaded Metal Conduit (7)
  • Threaded Metal Conduit;IMC Conduit (2)
  • Threaded Rigid and IMC Conduit (5)
  • Threaded Rigid Met (1)
  • Threaded Rigid Metal Conduit and IMC (4)
  • Tile and Carpet Applications (4)
  • Tile and Carpet Applications;Doors (1)
  • Tile or Brick (3)
  • To Secure Pipes, Tubes and Hoses for Fluid Conductors (1)
  • Two Duplex Receptacles (1)
  • Two GFCI Receptacles (1)
  • Two Single Flush Receptacles (1)
  • Two Toggle Switches (1)
  • Used to Connect Non-Metallic Cable to Box or Enclosure (4)
  • Utility Box (5)
  • Utility Boxes (7)
  • Utility Pipe (2)
  • Wall Only with Non-Metallic Wiring System (2)
  • Weatherproof Protection (1)
  • Wet Location (1)
  • Wet Location;Damp Location (26)
  • Wet Location;Stainless Conduit (1)
  • Wire Installation (1)
  • Wiring of Enclosures;Power Boxes;Machine Tools;and Power Centers (3)
  • Wood Floor Construction (1)
  • Wood or Metal Stud (1)
  • Show More...

• Application

  

  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (4)
  • 90 Degree Male- Form 2 (2)
  • 90 Degrees fitting with cover for connecting flexible metal conduit to box or enclosure. (2)
  • 90 Degrees fitting with cover used for connecting flexible metal conduit to box or enclosure. (6)
  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • AC/MC (11)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (24)
  • Act As Pull Outlets for Conductors Being Installed (2)
  • Act as pull outlets for conductors being installed, Provide openings for making splices and taps in conductors, Connect conduit sections, Provide taps for branch conduit runs, Provide for access to conductors for maintenance and future, system changes (5)
  • Act as Pull Outlets for Conductors being Installed;Provide Openings for Making Splices and Taps in Conductors;Connect Conduit Sections;Provide Taps for Branch Conduit Runs;Make 90° Bends in Conduit Runs;Provide for Access to Conductors for Maintenance and Future System Changes (64)
  • Act as Pull Outlets for Conductors that are Stiff Due to Large Size or Type of Insulation;Make 90° Bends in Conduit System;Allowing Straight Pull in Either Direction;Provide for Conduit Service Entrance to Buildings;Provide for Conductor Entrance to Motors;Provide Access to Wiring for Maintenance and Future Expansion (4)
  • Allows access to the interior of a conduit system for inspection, pulling and maintenance. (11)
  • Aluminum And Steel Flex AC MC Cable (7)
  • Armored Cable;Metal Clad Cable;MCI-A Cable;Flexible Metallic Conduit to a Box or Enclosure;Dry Appliations (3)
  • Armored/Metal Clad Cable (5)
  • Attaches a full range of EMT, Rigid conduit and cable to strut channels (7)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (3)
  • Bridgeport's LB Conduit Bodies with Integral Raintight Connectors allows access to the interior of a conduit system for inspection, pulling and maintenance, without needing to thread connectors into a conduit body entry. These conduit bodies come with stainless steel screws, an aluminum cover, and a neoprene gasket. (2)
  • C&I, Water, Communications, Electric Utility (14)
  • Cable Installation (8)
  • Ceiling Box (3)
  • Channel Nuts with Spring designed for use with standard 1-5/8 channels. (3)
  • Clamp on Type For Use With Threaded or Unthreaded EMT or IMC Conduit (2)
  • Clamp type entrance cap for rigid conduit and IMC. 3 holes 1 3/4" dia.; 4 holes 1 1/8" dia. (3)
  • Commercial (31)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (504)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (21)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (3)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility - Other (6)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (10)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (4)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (5)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (6)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (4)
  • Commercial/Residential (10)
  • Commercial;Industrial;Lighting Fixtures (6)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (30)
  • Commercial;Industrial;Wet Location (12)
  • Commercial;Non-Hazardous Location (4)
  • Concrete (3)
  • Conduit (69)
  • Conduit boxes installed in conduit systems within hazardous areas to: protect conductors in threaded rigid conduit, act as pull and splice boxes, interconnect lengths of conduit, change conduit direction, and provide access to conductors for maintenance and future system changes. (2)
  • Conduit Fitting (23)
  • Conduit;Commercial;Industrial (3)
  • CONNCET AND CHANGE DIRECTIONS OF CONDUIT RUNS (13)
  • Connector provides watertight seal around underground feeder cable. Tapered (NPT) threads. (2)
  • Controls and Drives; Power Distribution (3)
  • Damp Locations;Wet Locations (29)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (9)
  • Datacom and Low Voltage; HVAC, Plumbing and Refrigeration; Electrical Fixing and Fastening (4)
  • Datacom and Low Voltage;Electrical;HVAC;Plumbing and Refrigeration (10)
  • Designed and listed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code (28)
  • Designed for use whenever weatherproof protection is required while an outlet is in use. (2)
  • Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations (2)
  • Elbows are to bo installed on conduit raceways for underground stub-ups, and interconnection of conduit runs and other fittings. (10)
  • Electrical (125)
  • Electrical Fixing and Fastening (9)
  • Electrical Fixing and Fastening; Datacom and Low Voltage; HVAC, Plumbing and Refrigeration (4)
  • Electrical Fixing and Fastening; HVAC, Plumbing and Refrigeration; Datacom and Low Voltage (6)
  • Existing 1/2 in or 5/8 in wall with 4 in hole saw. (4)
  • Fasteners;Stud/Box Fasteners (2)
  • Fittings are to be used with PolyTuff® I and PolyTuff® II (3)
  • Flat Surface Retrofit Construction (2)
  • Flex AC MC Cable (8)
  • Floor Box (13)
  • For AC - MCI-A - HCF steel and aluminum cable (31)
  • For All Indoor And Outdoor Damp Or Wet Locations (11)
  • For conduits and cables (2)
  • For Connecting Conduit To Conduit (3)
  • For connecting nonmetallic cable to box or enclosure. (5)
  • For Connecting To Type A Flexible Nonmetallic Conduit (10)
  • For Flexible Type Neoprene, Hypalon And PVC Jacketed Power Or Control Cord And Cable (11)
  • For FM7 Unilet Conduit Outlet Bodies (14)
  • For Form 35 Unilet Conduit Outlet Bodies (5)
  • For Form 85 Unilet Conduit Outlet Bodies (6)
  • For Liquidtight Flexible Metal Conduit (22)
  • For Securing And Sealing Cords And Cables Entering Enclosures Or Raceways (9)
  • For Service Entrance Cable (3)
  • For tile and carpet applications (10)
  • For use in metal framing applications (15)
  • For use with 3/8 inch, 1/2 inch & 5/8 inch wall board and plaster (3)
  • For use with 61W, 62W, 640P, 640, 840 and 740 series floor boxes (3)
  • For use with 68 and 600 series floor boxes (5)
  • For use with 68 P floor box (6)
  • For use with 68 P round floor box (5)
  • For use with A and C series channel and inserts (4)
  • For use with A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (2)
  • For use with all Kindorf channels (4)
  • For Use With All Standard Conduit Bodies, Except Crouse Hinds And 2-1/2 - 3 IN And 3-1/2 - 4 IN Red Dot/L.E. Mason (3)
  • For use with armored/metal clad cable (3)
  • For use with Carflex conduit and Carflex X-Flex conduit (6)
  • For use with channel and channel fittings (2)
  • For use with conduit (19)
  • For use with conduit or pipe (4)
  • For use with drywall (3)
  • For use with Duraloy 7 Series fittings. (10)
  • For use with Liquidtight Metal conduit and PolyTuff I Non-Metallic conduit (3)
  • For use with non-metallic sheathed cable (7)
  • For use with one 4-wire twist-lock single receptacle (2)
  • For use with one toggle switch (2)
  • For use with Rigid Conduit and Pipe (3)
  • For Use With Rigid Steel, Rigid Aluminum Conduit And IMC (100)
  • For Use With Rigid Steel, Rigid Aluminum Conduit, IMC And EMT (9)
  • For use with round and octagon boxes (2)
  • For use with Single Receptacle, 20-50A (2)
  • For Use With Square Handle Tumbler Or Toggle Switches (2)
  • For Use With Standard 2 Or 3 Wire Duplex Receptacles (2)
  • For use with the conduits (3)
  • For Use With Threaded Metal Conduit (14)
  • For Use With Threaded Metal Conduit And IMC (19)
  • For Use With Threaded Rigid Metal Conduit and IMC (15)
  • For use with two duplex flush receptacles (2)
  • For Used To Cover Aluminum Conduit Body Opening (5)
  • For Used To Seal Up Holes Punched In Panels Or Knockouts From Outlet Boxes (2)
  • For Wet Location (8)
  • For Wet Locations (6)
  • For Wire Pulling Where a Raceway Changes Direction, To provide Access to the Inside of a Raceway (2)
  • General Purpose;Wet Location (6)
  • Hazardous Location (37)
  • Hazardous Location;Wet Location (28)
  • Hazardous Locations (10)
  • High-quality, corrosion-resistant, liquidtight termination for LTA flexible aluminum conduit (8)
  • Hospital construction where drywall depth often varies (2)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors & Controls;Printing Equipment;Pumps;Refrigeration Equipment;Assemblies;Wire Hook-Up;Indoor/Outdoor (12)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors and Controls;Printing Equipment;Pumps;Refrigeration Equipment;Transformer Connections;Outdoor Lighting (3)
  • HVAC, Plumbing and Refrigeration; Electrical Fixing and Fastening; Datacom and Low Voltage (7)
  • I-beam, Girder or Other Structural Member (2)
  • Ideal for the modern office with workstations that have power, communications and data equipment (2)
  • Ind Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (5)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (16)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (463)
  • Indoor and Outdoor;All Fittings Can Be Used in Chemical and Treatment Plants As Well As for Offshore;Typical Applications Include Wiring of Motors;Transformers;Advanced Machinery;Refrigeration and Tools (6)
  • Indoor Use in Wiring of Enclosures;Power Boxes;Machine Tools and Power Centers (3)
  • Indoor;Outdoor (3)
  • Industrial (47)
  • Industrial;Indoor;Outdoor (2)
  • Industrial;Interior;Exterior (16)
  • Industrial;Plumbing Applications (4)
  • Interior;Exterior (7)
  • Kindrof(R) Modular Metal Framing System (2)
  • Knockout (7)
  • Light Duty (5)
  • Listed for masonry walls (5)
  • Machine Tools, Motor Hookups, Food Processing Equipment, Extensions from Wire Ways, and Sensor and Micro Switch Wiring Found In Control Consoles (4)
  • Masonry Box (2)
  • Metal Framing (20)
  • New and Old Work Residential Construction (5)
  • New Concrete (6)
  • New Work Residential Construction (28)
  • NM Cable (12)
  • Non Metallic Cable (12)
  • Non-Hazardous Location (6)
  • Non-Metallic Sheathed Cable (9)
  • Nuclear;Pharmaceutical Industry Chemical;Petrochemical (8)
  • Octagon Boxes (3)
  • Octagon Outlet Box (6)
  • Offered in Numerous Configurations for 90 Degree Bends;Taps or Splices or Mounting Outlets (3)
  • Old Work Residential Construction (7)
  • Outdoor (20)
  • Outdoor Receptacle/Switch (4)
  • Polyethylene "Redheads" prevent damage to wire installation when placed between the wire and armored sheath. Rated 90 degree C. (3)
  • Power and Control Circuits (2)
  • Power and Low Voltage (4)
  • Power Distribution; Controls and Drives (4)
  • Prevents severe conduit bends and pullout (5)
  • Protect Conductors in Threaded Rigid Conduit;Act as Pull and Splice Boxes;Connect Lengths of Conduit;Change Conduit Direction;Provide Access to Conductors for Maintenance and Future System Changes;Act as Mounting Outlets for Fixtures (with Appropriate Covers);Act as Sealing Fittings (with Appropriate Covers) (25)
  • Protection of Fiber Optic Cable, Installation of Instrumentation and Control Cable, Indoor and Outdoor Lighting, Packaging Equipment, Marine and Shipboard Wiring, and Flexing-Component Wiring Protection on Robots, Graphic Arts Equipments, Etc (4)
  • Provide a Liquidtight and Strain Relief Termination for Flexible Type Neoprene;Hypalon and PVC Jacketed Power or Control Cord and Cable;For use in Wet or Dry Locations Sealing Electrical Connections Against Dust and Dirt;Oil;Water or Other Atmosphere Containing Moisture (8)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead or Into a Rigid Conduit;Form a Mechanical Grip and Water and/or Oil-Resistant Seal for Cord;Form a Non-Slip Connection or Termination for Flexible Cord (11)
  • Provide a Means for Passing a Cord Cable Into an Enclosure;Form a Watertight seal for Cord;Provide Pull-Out Protection for Cord;Ensuring a secure Connection (13)
  • Provides a Positive Seal Against Water, Oil And Dust (5)
  • Provides access to the interior of the raceway for wire pulling , splicing and maintenance, Allows connection of straight and branch conduit runs and 90 degree bends (18)
  • Provides weatherproof protection while an outlet is in use (3)
  • Pulling;Splicing (16)
  • Residential (3)
  • Residential and Light Commercial (2)
  • Residential Or Light Commercial New Construction (new Work) Electrical Installations (2)
  • Residential/Commercial (17)
  • Residential;Commercial (21)
  • Residential;Commercial;Interior;Exterior (3)
  • Screw-In Connector for flexible metal conduit (2)
  • Serve as Pulling Fittings;Make Bends in Conduit System;Provide Openings for Splicing;Connect and Change Direction of Conduit Runs;Allow Connections for Branch Runs;Permit Access to Conductors for Maintenance (10)
  • Simply snap cables into connector and snap assembly into electrical box. (3)
  • Single Eye (3)
  • Square Outlet Box (2)
  • Stationary Mach Equip In Factory - RoboticsElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMsElec Assemblies, Panels & EOEM - Elec Assemblies/Panels/EOEMs - AftermarketElec Assemblies, Panels & EOEM - Control Panels for MachinesElec Assemblies, Panels & EOEM - Panel BuildersInd Facilities & Factories - Facility: Power Distribution and ControlElec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (13)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (4)
  • Straight Male- Form 1 (3)
  • Straight Male- Form 2 (5)
  • Straight Male- Form 3 (3)
  • Straight Male- Form 4 (6)
  • Straight Male- Form 5 (3)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • Strut Fittings (22)
  • Strut System (22)
  • Suitable for any on grade/below grade application, concrete or wood sub-floor construction approved (2)
  • Suitable for any wiring application (5)
  • Suitable for Fixture Support Up to 50 Lbs (9)
  • Suitable for Masonry Walls (5)
  • Superstrut Pipe Straps are Designed to be Twist Inserted Anywhere Along the Slot Side of the Channel (41)
  • Support and Framing (25)
  • Support and framing applications (17)
  • Surface Raceway and Lighting Systems (2)
  • T&B Bullet meets performance requirements when terminating Type B liquidtight non-metallic conduit or flexible non-metallic tubing to a box or enclosure with knockout opening or threaded hub (15)
  • Terminates flexible metal conduit to a knockout in a dry location box or enclosure (2)
  • The cover will fit the next smaller size box (3)
  • These watertight fittings are designed for both indoor and outdoor applications. All fittings can be used in chemical and treatment plants as well as for offshore applications. Straight connector for use with portable cord provides liquid tight and water tight protection. Typical applications include wiring of motors, transformers, advanced machinery, refrigeration, and tools. (16)
  • Threaded bodies for rigid conduit or IMC allows access for inspection, pulling and maintenance. (18)
  • To Allow Easy Disassembly of Conduit System;To Function as Junction and Pull Box for Multiple Conductors And Conduits;Indoors or Outdoors Where Space is Limited;Such as in Gasoline Pumps (2)
  • To Change Direction for Threaded, Rigid Conduit or When Terminating at a Box or Fitting (5)
  • To close up a taped hole or hub. (4)
  • TO CONNECT AMD CHANGE DIRECTION OF CONDUIT RUNS (12)
  • To connect and change direction of conduit runs (6)
  • To Connect Flexible Cord to a Box or Enclosure and Provide Adequate Strain Relief (3)
  • To join two lengths of threaded conduit; couples conduit when conduit cannot be turned (3)
  • To positively bond conduit to box or enclosure (37)
  • To provide a liquidtight, dust tight connection between flexible, non-metallic conduit and a box or an enclosure (2)
  • To Provide a Liquidtight;Dust Tight Connection Between Flexible, Non-Metallic Conduit and a Box or an Enclosure (5)
  • To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. (38)
  • To secure pipes, tubes and hoses for fluid conductors (3)
  • Type T Combination EMT/Rigid Conduit Body with Cover and Gasket (4)
  • UL Listed (5)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electric Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing require (10)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electrical Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing requi (2)
  • Use with Liquid Tight or Raintight Connectors, or Threaded Conduit (when used with locknuts) (7)
  • Use with metallic and non-metallic conduit to seal out water, oil, and dust in applications for food processors, beverage and chemical plants, plastics fabricators, machine shops, etc. Liquidtight connectors are also suitable for use in hazardous location (16)
  • Used to close a knockout in a weatherproof box (2)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (10)
  • Used to connect flexible metal conduit to box or enclosure. (14)
  • Used to connect modular framing channels to accessories (3)
  • Used to connect single round service entrance cable to box or enclosure. (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used to connect steel flexible metal conduit or XRW FMC to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT. Raintight. Concrete-Tight. (2)
  • Used to Join Emt to Flexible Metal Conduit. Screw-In Type For Flex. Compression Type For EMT (3)
  • Used to join two lengths of flexible metal conduit. (3)
  • Used to join two lengths of stainless EMT (6)
  • Used to mount, brace, support or connect structural loads in building construction such as pipe or electrical or data wire (5)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (52)
  • Utility Box (5)
  • Wall Box (12)
  • Wet Location (23)
  • Wet Location;Hazardous (18)
  • Wire Management (3)
  • Wiring Device;Conductor;Indoor or Outdoor (2)
  • Wiring Enclosure;Pendant Station;Hand Tool;Construction;Processing and Material Handling Equipment;Pump;Motor and Machine Tool;Hazardous/Wet Location (3)
  • Show More...

• Package Quantity

  

  • 1 CA (2)
  • 1 CA;10 PK (3)
  • 1 CA;100 PK (1)
  • 1 CA;2 PK (1)
  • 1 CA;20 PK (4)
  • 1 CA;25 PK (1)
  • 1 CA;4 PK (5)
  • 1 CA;50 PK (1)
  • 1 CA;6 PK (2)
  • 1 CA;8 PK (2)
  • 1 ct (143)
  • 1 CT;10 PK (29)
  • 1 CT;100 PK (23)
  • 1 CT;12 PK (1)
  • 1 CT;15 PK (3)
  • 1 CT;2 Pk (17)
  • 1 CT;20 PK (5)
  • 1 CT;24 Pk (1)
  • 1 CT;25 PK (52)
  • 1 CT;30 PK (3)
  • 1 CT;4 Pk (2)
  • 1 CT;40 PK (3)
  • 1 CT;5 PK (35)
  • 1 CT;50 Pk (44)
  • 1 CT;63 PK (1)
  • 1 CT;8 PK (3)
  • 1 CT;9 PK (1)
  • 1 ft (1)
  • 1 PK (7)
  • 1 PK;10 PK (4)
  • 1 PK;4 PK (1)
  • 1 Unit PK;4 Standard PK (2)
  • 10 BX;50 CT (1)
  • 10 CT (48)
  • 10 CT;100 PK (13)
  • 10 CT;25 PK (2)
  • 10 CT;40 PK (1)
  • 10 CT;50 PK (25)
  • 10 PC/BG;240 PC/CA (1)
  • 10 PC/BG;250 PC/CA (1)
  • 10 PK (19)
  • 10 PK;1 CT (18)
  • 10 PK;100 CT (1)
  • 10 PK;2 CT (1)
  • 10 PK;250 CT (3)
  • 10 PK;50 PK (7)
  • 10 PK;500 CT (14)
  • 10 PK;600 CT (2)
  • 10 SP (1)
  • 10/100 PK (3)
  • 100 BX (4)
  • 100 CA (1)
  • 100 CT (47)
  • 100 CT;1000 PK (7)
  • 100 CT;500 PK (4)
  • 100 JR (4)
  • 100 PK (30)
  • 100 PK;1 CT (3)
  • 100 PK;10 CT (3)
  • 100 PK;1000 CT (1)
  • 100 PK;1000 PK (3)
  • 100 PK;25 CT (4)
  • 100 PK;5 CT (1)
  • 1000 PK;100 CT (1)
  • 12 CT (10)
  • 12 PK (3)
  • 12 PK;1 CT (4)
  • 13 PK (3)
  • 14 PK;1 CT (2)
  • 15 CT (1)
  • 15 PK (2)
  • 15 PK;1 CT (2)
  • 150 PL (1)
  • 16 PK (5)
  • 18 CT (2)
  • 2 CT (25)
  • 2 CT;10 PK (8)
  • 2 CT;20 PK (1)
  • 2 CT;5 PK (3)
  • 2 PK (2)
  • 2 PK;1 CT (6)
  • 2 PK;10 PK (2)
  • 2/10 PK (4)
  • 20 CT (19)
  • 20 CT;100 PK (5)
  • 20 CT;200 PK (2)
  • 20 PK (19)
  • 20 PK;1 CT (2)
  • 20 PK;10 CT (1)
  • 20 PK;100 PK (1)
  • 20 PK;5 CT (1)
  • 20 PK;500 CT (2)
  • 20 Unit PK;20 Standard PK (2)
  • 200 PK;50 CT (3)
  • 200 STD PK;20 CT (1)
  • 24 CT (3)
  • 24 CT;1 PK (1)
  • 24 PK (10)
  • 25 CA (2)
  • 25 CA;250 PK (1)
  • 25 CT (110)
  • 25 CT;100 PK (17)
  • 25 CT;250 PK (8)
  • 25 CT;50 PK (16)
  • 25 PC/BG;1000 PC/CA (1)
  • 25 PC/BG;450 PC/CA (1)
  • 25 PC/BX (1)
  • 25 PK (69)
  • 25 PK;1 CT (15)
  • 25 PK;100 PK (7)
  • 25 PK;250 PK (2)
  • 25 PK;5 CT (7)
  • 25 Unit PK;25 Standard PK (1)
  • 25/100 PK (1)
  • 250 CT (1)
  • 250 PK (1)
  • 250 PK;1000 PK (1)
  • 250 PK;25 CT (2)
  • 3 CT (1)
  • 3 CT;15 PK (1)
  • 3 PK;1 CT (1)
  • 30 CT (4)
  • 30 PK (2)
  • 4 CT (1)
  • 4 PK;1 CT (4)
  • 40 PK;1 CT (1)
  • 48 CT (1)
  • 48 PK (1)
  • 48 SP (1)
  • 5 CT (41)
  • 5 CT;10 PK (7)
  • 5 CT;100 PK (1)
  • 5 CT;20 PK (6)
  • 5 CT;200 PK (1)
  • 5 CT;25 PK (24)
  • 5 CT;50 PK (7)
  • 5 PK (12)
  • 5 PK;1 CT (18)
  • 5 PK;25 PK (7)
  • 5 SP (1)
  • 5/25 PK (2)
  • 5/50 PK (2)
  • 50 BX (1)
  • 50 CA (1)
  • 50 CT (111)
  • 50 CT;1 PK (3)
  • 50 CT;200 PK (10)
  • 50 CT;250 PK (1)
  • 50 CT;500 PK (5)
  • 50 JR (1)
  • 50 PK (104)
  • 50 PK;1 CT (8)
  • 50 PK;10 CT (4)
  • 50 PK;5 CT (6)
  • 50 PK;500 CT (1)
  • 50 PK;500 PK (8)
  • 50 Unit PK;50 Standard PK (1)
  • 500 CT (5)
  • 500 CT;100 PK (1)
  • 500 PK (1)
  • 500 PK;10 CT (6)
  • 500 PK;100 CT (1)
  • 500 PK;25 CT (2)
  • 500 STD PK;50 CT (3)
  • 6 CT (6)
  • 6 per Shrink (1)
  • 6 PK (6)
  • 6 PK;1 CT (1)
  • 6 SP (1)
  • 7 CT (1)
  • 7 PK;1 CT (1)
  • 7000 PK;50 CT (1)
  • 75 CT (4)
  • 8 CT (2)
  • 8 PK (1)
  • 8 PK;1 CT (7)
  • 9 PK (7)
  • Show More...

• Weight

  

  • 0.01 lb/EA (3)
  • 0.02 lb/EA (5)
  • 0.03 lb/EA (3)
  • 0.04 lb/EA (6)
  • 0.049 lb/EA (2)
  • 0.05 lb/EA (13)
  • 0.052 lb/EA (2)
  • 0.06 lb (2)
  • 0.06 lb/EA (3)
  • 0.062 lb/EA (3)
  • 0.07 lb/EA (7)
  • 0.076 lb/EA (2)
  • 0.08 lb (3)
  • 0.08 lb/EA (9)
  • 0.082 lb/EA (2)
  • 0.085 lb/EA (2)
  • 0.09 lb (2)
  • 0.09 lb/EA (7)
  • 0.1 lb/EA (19)
  • 0.11 lb (2)
  • 0.11 lb/EA (4)
  • 0.118 lb/EA (2)
  • 0.12 lb/EA (5)
  • 0.125 lb/EA (2)
  • 0.13 lb/EA (6)
  • 0.14 lb/EA (5)
  • 0.15 lb/EA (7)
  • 0.16 lb/EA (5)
  • 0.17 lb/EA (2)
  • 0.18 lb (3)
  • 0.18 lb/EA (5)
  • 0.19 lb (2)
  • 0.19 lb/EA (2)
  • 0.2 lb/EA (11)
  • 0.21 lb/EA (5)
  • 0.22 lb/EA (11)
  • 0.23 lb/EA (8)
  • 0.25 lb/EA (13)
  • 0.26 lb/EA (3)
  • 0.27 lb/EA (6)
  • 0.28 lb/EA (3)
  • 0.29 lb/EA (5)
  • 0.296 lb/EA (2)
  • 0.3 lb/EA (6)
  • 0.32 lb/EA (5)
  • 0.34 lb/EA (11)
  • 0.35 lb (3)
  • 0.35 lb/EA (7)
  • 0.36 lb/EA (11)
  • 0.37 lb/EA (6)
  • 0.38 lb/EA (10)
  • 0.39 lb/EA (4)
  • 0.4 lb/EA (9)
  • 0.41 lb/EA (3)
  • 0.43 lb/EA (3)
  • 0.44 lb/EA (6)
  • 0.45 lb/EA (3)
  • 0.46 lb/EA (5)
  • 0.47 lb/EA (4)
  • 0.48 lb/EA (3)
  • 0.5 lb/EA (6)
  • 0.50 lb/EA (8)
  • 0.51 lb/EA (5)
  • 0.52 lb/EA (3)
  • 0.53 lb/EA (6)
  • 0.54 lb/EA (7)
  • 0.55 lb (2)
  • 0.55 lb/EA (5)
  • 0.56 lb/EA (3)
  • 0.57 lb/EA (2)
  • 0.59 lb (2)
  • 0.6 lb/EA (6)
  • 0.60 lb/EA (2)
  • 0.62 lb/EA (10)
  • 0.63 lb/EA (9)
  • 0.64 lb/EA (7)
  • 0.65 lb/EA (4)
  • 0.66 lb/EA (6)
  • 0.68 lb/EA (5)
  • 0.69 lb/EA (2)
  • 0.7 lb/EA (2)
  • 0.73 lb/EA (4)
  • 0.75 lb/EA (2)
  • 0.76 lb/EA (3)
  • 0.79 lb/EA (3)
  • 0.8 lb/EA (4)
  • 0.85 lb/EA (2)
  • 0.86 lb/EA (2)
  • 0.87 lb/EA (3)
  • 0.9 lb/EA (4)
  • 0.91 lb/EA (3)
  • 0.91 Lb/Ft (7)
  • 0.93 lb/EA (5)
  • 0.94 lb/EA (2)
  • 0.97 lb/EA (2)
  • 0.99 lb/EA (3)
  • 1 lb/EA (8)
  • 1.01 lb/EA (2)
  • 1.016 Lb/Ft (3)
  • 1.05 lb/EA (6)
  • 1.06 lb/EA (2)
  • 1.07 lb/EA (2)
  • 1.08 lb/EA (3)
  • 1.1 lb (2)
  • 1.13 lb/EA (2)
  • 1.15 lb/EA (4)
  • 1.18 lb/EA (3)
  • 1.19 lb (2)
  • 1.2 lb/EA (3)
  • 1.22 lb/EA (2)
  • 1.25 lb/EA (3)
  • 1.3 lb/EA (4)
  • 1.33 lb/EA (3)
  • 1.34 Lb/Ft (3)
  • 1.35 lb/EA (3)
  • 1.5 lb/EA (4)
  • 1.6 lb/EA (2)
  • 1.7 lb/EA (3)
  • 1.71 lb/EA (3)
  • 1.8 lb/EA (5)
  • 1.82 lb/ft (5)
  • 1.82 lb/ft;2.71 kg/m (4)
  • 1.9 lb/EA (2)
  • 1.91 Lb/Ft (4)
  • 1.91 lb/ft;2.84 kg/m (2)
  • 1.95 lb/EA (2)
  • 10 lb (3)
  • 10 lb/100 (7)
  • 10.35 lb/EA (2)
  • 104 lb/100 (3)
  • 11.3 lb/100 (2)
  • 12 lb/100 (3)
  • 12.5 lb/100 (7)
  • 12.70 lb/100;28 kg/100 (2)
  • 13 lb (4)
  • 13 lb/100 (2)
  • 137.5 lb/100 (2)
  • 14 lb/100 (8)
  • 14.51 lb/100;32 kg/100 (4)
  • 15 lb (4)
  • 15 lb/100 (3)
  • 15 lb;6.8 kg (2)
  • 152 lb/100 (2)
  • 155 lb/100 (2)
  • 16 lb/100 (3)
  • 16.33 lb/100;36 kg/100 (3)
  • 176.4 lb/100 (2)
  • 18 lb (3)
  • 18 lb/100 (5)
  • 18.14 lb/100;40 kg/100 (3)
  • 185 lb/100 (5)
  • 19 lb (2)
  • 19 lb/100 (2)
  • 19.96 lb/100;44 kg/100 (3)
  • 190 lb/100 (4)
  • 2 lb (2)
  • 2 lb/EA (6)
  • 2.2 lb/EA (2)
  • 2.25 lb/EA (2)
  • 2.3 lb/EA (3)
  • 2.35 lb/EA (3)
  • 2.43 lb/EA (2)
  • 2.5 lb/EA (2)
  • 2.6 lb/EA (3)
  • 2.7 lb (2)
  • 2.7 lb/EA (3)
  • 2.9 lb/EA (2)
  • 2.93 lb/EA (2)
  • 20 lb/100 (3)
  • 20.5 lb/100 (2)
  • 21 lb/100 (3)
  • 21 lb/EA (2)
  • 22 lb (4)
  • 22.5 lb/100 (2)
  • 23 lb/EA (2)
  • 23.59 lb/100;52 kg/100 (3)
  • 24 lb (5)
  • 25 lb/100 (8)
  • 26 lb/EA (5)
  • 27 lb/100 (2)
  • 27.5 lb/100 (3)
  • 28.5 lb/100 (2)
  • 28.7 lb/100 (2)
  • 29 lb/100 (2)
  • 29.94 lb/100;66 kg/100 (2)
  • 3 lb (3)
  • 3.25 lb/EA (2)
  • 3.3 lb/EA (2)
  • 3.35 lb/EA (3)
  • 3.64 Lb/Ft (5)
  • 3.82 Lb/Ft (3)
  • 30 lb/EA (4)
  • 30.19 lb/100 (2)
  • 31 lb/EA (7)
  • 32 lb (2)
  • 32 lb/100 (2)
  • 34 lb/EA (5)
  • 35 lb (2)
  • 35 lb/EA (3)
  • 360 lb/100 (2)
  • 37.5 lb/100 (15)
  • 38 Pound (2)
  • 38.10 lb/100;84 kg/100 (2)
  • 39 lb/EA (2)
  • 39.7 lb/100 (3)
  • 392 lb;177.8 kg (2)
  • 4 lb (3)
  • 4.05 lb/EA (2)
  • 4.45 lb/EA (2)
  • 4.53 lb/EA (2)
  • 40 lb/100 (3)
  • 400 lb;181.4 kg (2)
  • 44 lb/100 (3)
  • 44.1 lb/100 (2)
  • 47.17 lb/100;104 kg/100 (2)
  • 5 lb (4)
  • 5 lb/EA (3)
  • 5.33 lb/EA (2)
  • 5.6 lb/EA (2)
  • 50 lb/100 (12)
  • 50 lb/EA (3)
  • 55 lb/100 (2)
  • 56 lb/100 (4)
  • 58 lb/100 (3)
  • 6 lb/100 (3)
  • 6 lb/EA (3)
  • 6.0699 lb (2)
  • 6.55 lb/EA (2)
  • 61 lb/100 (2)
  • 62.5 lb/100 (5)
  • 63.5 lb/100 (2)
  • 64 lb/100 (2)
  • 65 lb/100 (2)
  • 67 lb/100 (3)
  • 7 lb (4)
  • 7 lb/EA (3)
  • 7.65 lb (4)
  • 70 lb/100 (2)
  • 74.5 lb/100 (3)
  • 75 lb/100 (2)
  • 75 lb;34.0 kg (2)
  • 76 lb;34.5 kg (2)
  • 8 lb (2)
  • 8 lb/100;4.54 kg/100 (2)
  • 84 lb/100 (8)
  • 87 LB PER 100 FT (2)
  • 87 lb/ft (3)
  • 9 lb/100 (3)
  • 9.35 lb/EA (2)
  • 93 lb/100 (2)
  • Show More...

• Made In Usa

  

  • no (1)
  • yes (893)
  • Show More...

• Manufacturer Status

  

  • Inactive (30)
  • Non-Stock (297)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (197)
  • ADHESIVES (1)
  • ALL PLASTIBOND FITTINGS (183)
  • ALUM BUILDING WIRE (16)
  • ANCHORS & ANCHOR KITS (2)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (154)
  • BOX SUPPORT (34)
  • CABLE & PIPE TRANSITS (8)
  • CADDY (STRAPS ONLY) (16)
  • CONDUIT HANGERS/STAND OFF STRAPS (14)
  • CORD CONNECTORS & CORD GRIPS (412)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (26)
  • Datacom Wiring Devices and Accessories (4)
  • DIECAST EMT FITTINGS (149)
  • DIECAST OFFSET & CHASE NIPPLES (1)
  • EMT ELBOWS (48)
  • EMT STRAPS (1)
  • EXOTHERMIC GROUNDING PRODUCTS (2)
  • FASTENERS (17)
  • FLEX & MC FITTINGS (215)
  • FLEX & MC STRAPS (5)
  • FLOOR BOXES (145)
  • Fluorescent Fixtures & Accessories (2)
  • FORM 5 CONDULETS, COVERS, & GASKETS (424)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (494)
  • Form 9 condulets, covers & gaskets (77)
  • FS BOXES AND COVERS (75)
  • Fuses & Fuse Accessories (183)
  • HAND TOOLS (5)
  • HANDY BOXES (40)
  • HAZARDOUS LOCATION FITTINGS (149)
  • HAZARDOUS LOCATION LIGHTING FIXTURES (6)
  • HAZARDOUS LOCATION MOTOR CONTROL (2)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (129)
  • HVACR Copper Tubing & Copper Fittings (4)
  • Industrial cord connectors (2)
  • LAMPS (2)
  • Liquid Tight (2)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (79)
  • METALLIC FITTINGS (286)
  • MISC FITTINGS (118)
  • Miscellaneous commercial & industrial devices (2)
  • NEMA RATED TURNLOK PLUGS, CONNECTORS, & RECEPTICLES (1)
  • NON METALLIC JUNCTION BOXES (36)
  • NON-METALLIC FITTINGS (96)
  • NON-METALLIC SEALTITE AND FITTINGS (6)
  • OCTAGON BOXES (13)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (20)
  • Plastibond, Fiberglass Conduit & Fittings (1)
  • PLASTIC BOXES (207)
  • Poles & Accessories (1)
  • PVC & ENT (1)
  • PVC BOXES (6)
  • PVC CONDULETS (2)
  • PVC ELBOWS (5)
  • Residential cord connectors (6)
  • Residential plates (2)
  • Residential receptacles (1)
  • RIGID COUPLINGS (46)
  • RIGID ELBOWS (72)
  • RIGID NIPPLES (282)
  • RIGID STRAPS & CLAMPBACKS (6)
  • ROMEX CONNECTORS (20)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (22)
  • SERVICE ENTRANCE - SEU & SER (6)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (26)
  • SLB'S & JAKE ELL'S (14)
  • SPRING NUTS & TWIRL NUTS (28)
  • Stainless Rigid Conduit (27)
  • Stainless Steel EMT Conduit (8)
  • STEEL BOXES & COVERS (305)
  • STEEL EMT FITTINGS (46)
  • STEEL JUNCTION BOXES (14)
  • STEEL WIRE WAY JUNCTION BOXES (7)
  • STRUT CHANNEL (196)
  • STRUT STRAPS (102)
  • SWITCH BOXES (43)
  • THREAD RODS (14)
  • TRAY CABLE (1)
  • VYNCKIER FIBERGLASS ENCLOSURES (14)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (11)
  • WEATHERPROOF BOXES & COVERS (313)
  • WIRE NUTS (2)
  • Show More...

• Shape

  

  • Brass (2)
  • C (11)
  • Deep (9)
  • LB (21)
  • LL (9)
  • LR (7)
  • Metallic Cover (3)
  • Nickel (1)
  • Octagon (45)
  • Plastic (4)
  • Rectangle (1)
  • Rectangular (237)
  • Round (93)
  • Round (Ceiling Box) (1)
  • Shallow (17)
  • Square (246)
  • T (17)
  • TB (8)
  • UV-Rated Plastic (1)
  • X (5)
  • Show More...

• Installation

  

  • (2) Screw Clamp (1)
  • SCREW (82)
  • THREADED MALE (27)
  • Wood Floor, Old/New Work (5)
  • Show More...

• Used On

  

  • 2302, 3303, 4304, 5305 and 9314 Series Fiberglass BOX Wall Box (1)
  • Concrete Floor Box (1)
  • Electrical Box (1)
  • Flexible Non-Metallic Liquidtight Tubing (1)
  • Liquid Tight Conduit (3)
  • Liquidtight Conduit (7)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (14)
  • P1000 Channel (1)
  • PS 100 CHANNEL, PS 200 2T3 CHANNEL (1)
  • RIGID CONDUIT (263)
  • SLIDERBOX Series SB-2/SB-3/SB-4 and flexBOX Series P-240OW, P-352OW (1)
  • Show More...

• Bend Angle

  

  • 30 DEG (1)
  • 45 DEG (27)
  • 45 Degree (14)
  • 90 ° (1)
  • 90 DEG (5)
  • 90 Degree (88)
  • Show More...

• Finish

  

  • 0.002 Inch Urethane Coated Interior, 0.04 Inch PVC Coated Exterior (2)
  • 2 Mil Red Urethane Coated Interior, 40 Mil Gray PVC Coated Exterior (23)
  • 2 Mil Red Urethane Coated Interior, 40 Mil Gray PVC Coated Exterior, A Clear Urethane Coated Thread (16)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior (2)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior, Hot Dip Galvanized (2)
  • 2 Mil Red Urethane Coated Over Galvanized Threads Interior, 40 Mil Gray PVC Coated Exterior (16)
  • 2 MIL RED URETHANE INTERIOR, 40 MIL GRAY PVC EXTERIOR COATED (3)
  • 20 Mil Gray PVC Coated Exterior (1)
  • 40 MIL GRAY PVC COATED EXTERIOR, 2 MIL RED URETHANE COATED INTERIOR (8)
  • Acrylic Painted (2)
  • Aluminum (43)
  • Aluminum Acrylic Paint (6)
  • As Cast (2)
  • Ball burnish (56)
  • Ball Burnished;Mirror Smooth (44)
  • Ball Burnished;Mirror Smooth;Zinc Electro-Plate (Strap) (3)
  • Beige/Tan (1)
  • Black (6)
  • Brass (7)
  • Bronze (4)
  • Brushed (5)
  • Caddy?® Armour (7)
  • CAST ALUMINUM (1)
  • Clear Polycarbonate (2)
  • Corrosion Resistant Metallic Painted (1)
  • DURA GREEN (20)
  • Electro-galvanized (51)
  • ELECTROGALVANIZED (47)
  • Electro-Galvanized Acrylic Painted (Body);Natural (Gasket) (1)
  • Electrogalvanized and Aluminum Acrylic Paint (4)
  • Electrogalvanized and Aluminum Acrylic Paint (Body);Natural (Cover) (25)
  • Electro-Galvanized Chromate Treated (2)
  • Electrogalvanized with Aluminum Acrylic Paint (64)
  • Electrogalvanized With Aluminum Acrylic Painted (201)
  • Electro-Galvanized with Aluminum Acrylic Painted (13)
  • Electrogalvanized With Aluminum Acrylic Painted (Body), Electrogalvanized With Chromate Treatment (Nut) (1)
  • Electrogalvanized With Chromate Treatment (3)
  • Electrogalvanizing (10)
  • Electro-Plated (1)
  • Electrostatic Powder Coat (1)
  • Electrostatically Painted Baked Powder Coated (2)
  • Enamel (24)
  • Enamel paint (6)
  • Epoxy Powder Coat (30)
  • Epoxy Powder Coated (107)
  • Epoxy Powder Coated Dichromate Zinc Electro-Plated (2)
  • Epoxy Powder Painted (15)
  • Epoxy Powder Painted (Body);Natural (Gasket) (19)
  • Fiberglass (4)
  • Frosted (1)
  • Galvanized (394)
  • Galvanized;PVC Coated (Exterior);Urethane Coated (Interior) (5)
  • Galvanized-Krom (1)
  • Galvanized-Krom/Standard (7)
  • Galv-Krom (8)
  • Galv-Krom/Standard (3)
  • Gold (18)
  • Gold Galvanized (12)
  • Gold Galvanized/Standard (5)
  • GoldGalv/Standard (2)
  • Gray (7)
  • Gray Polycarbonate (2)
  • Hot Dip Galvanized (32)
  • Hot-Dip Galvanize (12)
  • Hot-Dipped Galvanized (44)
  • Metallic (3)
  • Metallic Paint (1)
  • Molded (3)
  • Molded;Electro Zinc (Locknut) (2)
  • N/A (24)
  • Natural (123)
  • Natural finish (1)
  • Nickel (2)
  • Nickel Plated (5)
  • NO FINISH (14)
  • Not Applicable (2)
  • nVent CADDY Armour (3)
  • PERMA-GREEN[R] II (2)
  • PERMA-GREEN[R] III (1)
  • Plain (11)
  • PLAIN (NO FINISH) (2)
  • Plastic (1)
  • POLISHED (58)
  • Polycarbonate (1)
  • Powder Coat (84)
  • Powder Coated (15)
  • Powder Coated Epoxy (2)
  • Powder Epoxy Paint (32)
  • Powder Paint (22)
  • Powder-coated (1)
  • Power Coat (2)
  • Pre Galvanized (20)
  • Pre-Galvanized (225)
  • PREGALVANIZED (1)
  • Premium Powder Coated (10)
  • PVC (Exterior Coating);Urethane (Interior Coating) (3)
  • PVC Coated (9)
  • PVC Coated (Exterior);Urethane Coated (Interior) (5)
  • PVC Exterior Coating;Urethane Interior Coating (1)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • Red (1)
  • RED URETHANE COATED INTERIOR, GRAY PVC COATED EXTERIOR (7)
  • Silver (17)
  • Silver Galvanized (8)
  • Silver Galvanized/Electro-Galvanized (17)
  • SilverGalv/Electro-Galvanized (3)
  • Smooth (3)
  • Smooth white plastic (1)
  • STAINLESS STEEL (7)
  • STAINLESS STEEL TYPE 304 (43)
  • STAINLESS STEEL TYPE 316 (17)
  • Steel (1)
  • Textured (2)
  • Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) (4)
  • Unpainted (5)
  • Untreated (86)
  • Urethane Powder Coated (1)
  • white (5)
  • Yellow Zinc Plated (3)
  • Zinc (12)
  • Zinc Chromate (4)
  • Zinc Coated (1)
  • Zinc Electroplate (2)
  • Zinc Electroplate/Chromate/Epoxy Powder Coat (82)
  • Zinc Electroplated (134)
  • Zinc Electro-Plated (5)
  • Zinc Electroplated Chromate Epoxy Powder Coated (2)
  • Zinc Electro-Plated Chromate Epoxy Powder Coated (2)
  • Zinc Electroplated With Chromate Coated (39)
  • Zinc Electroplated/Chromate Coating (53)
  • Zinc Electroplated;Chromate And Epoxy Powder Coat/Zinc Electroplate (2)
  • Zinc Electro-Plated;Dichromate;Epoxy Powder Coated (2)
  • Zinc Phosphate (3)
  • Zinc Plated (189)
  • Zink Chromate (41)
  • Show More...

• Color

  

  • Almond with Almond cover (1)
  • Beige (5)
  • Beige/Tan (27)
  • Black (79)
  • Black with Black cover (2)
  • Black/Brass (1)
  • Blue (62)
  • Brass (21)
  • Brass (Cover) (3)
  • Brass Nickel (2)
  • Brass with Brass cover (2)
  • Bronze (28)
  • Bronze;Other (2)
  • Brown (20)
  • Brown (Cover) (2)
  • Brown Label (1)
  • Brown with Brown cover (2)
  • Brown/Clear (1)
  • Brown;Other (1)
  • Caramel (2)
  • Caramel with Caramel cover (1)
  • Clear (9)
  • Clear/Transparent (2)
  • Color (6)
  • Color Yellow (1)
  • Colorless (45)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (12)
  • Dark Gray (2)
  • DURA GREEN (6)
  • Eaton Crouse-Hinds (3)
  • GB (1)
  • GLV (9)
  • Gold (10)
  • Gray (479)
  • Gray (Exterior Coating);Red (Interior Coating) (6)
  • Gray (Exterior);Red (Interior) (5)
  • Gray (Exterior);Red (Interior);Black (Thread Protector) (1)
  • Gray (Exterior);Red (Interior);Blue (Thread Protector) (4)
  • Gray (Standard);Black (Optional) (3)
  • Gray Primer (6)
  • Gray with Gray cover (2)
  • Gray/Red (1)
  • Gray;Clear (1)
  • Gray;Grey (49)
  • Gray;Yellow (1)
  • Green (27)
  • Green Label (1)
  • Green;Other (3)
  • Grey with Black Insulator (2)
  • Ivory (63)
  • Jet Black (1)
  • L(4.260) x W(3.260) x H(0.312) (1)
  • L(6.094) x W(9.288) x H(0.750) (1)
  • Light Almond (2)
  • Light Almond (Cover) (1)
  • Light Almond with Light Almond cover (1)
  • MALLEABLE IRON (87)
  • Metallic (45)
  • METALLIC GRAY (2)
  • Natural (116)
  • Natural with red union nut (12)
  • Nickel with Nickel cover (1)
  • Nickel-Plated (Cover) (3)
  • Not Applicable (1)
  • Open Office, Retail (1)
  • Orange (2)
  • Orange Label (1)
  • Orchid (2)
  • Other;Purple (4)
  • Other;Yellow (2)
  • Pink (4)
  • PRE-GALV (7)
  • Pre-Galvanized (Finish) (1)
  • Purple (2)
  • Purple Label (2)
  • RAL 7035 GRAY (1)
  • Red (20)
  • Red;Silver (1)
  • Silver (426)
  • Silver (Spring) (2)
  • Silver and red (1)
  • Silver;Gray (1)
  • Slate (1)
  • Stainless Steel (1)
  • Steel (1)
  • STRGHT BLADE PLG&CONNEC (1)
  • Taupe (1)
  • Unpainted (18)
  • White (73)
  • White with Clear cover (5)
  • White, paintable to match any décor (1)
  • White/Clear (Cover) (1)
  • With Arrow-Hart Switch, Without Overload Protection (1)
  • Yellow (20)
  • Yellow (Handle) (1)
  • Zinc Plated (Finish) (1)
  • Show More...

• Applicable Standard

  

  • ANSI C80.1 (47)
  • ANSI C80.1, Federal Specification WW-C-563 (19)
  • ANSI C80.1, NEMA (77)
  • ANSI C80.1, NEMA RN-1 (2)
  • ANSI C80.3 (37)
  • ANSI C80.3, Fed Spec WW-C-563 (1)
  • ANSI C80.3, WW-C-563 (3)
  • ANSI C80.5 (9)
  • ANSI C80.5, NEMA (2)
  • ISO 9001 (4)
  • MFMA-2 (1)
  • UL (Canada and US), ETL (1)
  • Show More...

• Construction

  

  • 16.1 (2)
  • 18.5 (2)
  • 23 (2)
  • 30.5 (2)
  • All floors (1)
  • Box Depth = Standard (1)
  • Die Cast (11)
  • Die Cast Aluminum (1)
  • Die-Cast (10)
  • Die-Cast Metal (20)
  • Direct Mount Box - with rotating dual support (1)
  • Direct Mount Shallow Box - with rotating dual support (2)
  • Drawn (83)
  • Dustproof (8)
  • Explosionproof, Dust Ignitionproof (4)
  • Explosionproof, Dust-Ignitionproof, Raintight (67)
  • Fan Brace - use with standard grade box # 10 support 16"-24" spans (1)
  • Fan Brace - use standard octagon electrical box, single # 10 support for 16"-24" spans (1)
  • Heavy Duty (6)
  • Metallic (80)
  • new work (8)
  • new work and retrofit (1)
  • Nonmetallic (23)
  • Noryl (1)
  • old work (2)
  • ONE PIECE (24)
  • Pre-galvinized steel (5)
  • PVC (2)
  • Raintight (3)
  • Retrofit Box - Fan Brace premium grade with deep box, rotating dual support for 16"-24" spans (1)
  • Slide Fan Support - heavy duty slide with standard box, rotating dual support for 16"-24" spans (1)
  • Slide Fan Support - heavy duty slide with standard box, rotating dual support for 16"-24" spans - Contractor Pack (1)
  • Stamped steel (3)
  • Thermoplastic (16)
  • TWO PIECE (124)
  • Unpainted steel (1)
  • Various Types of Pulling, Support and Strain Relief Grips (20)
  • Watertight (3)
  • Watertight, Explosionproof (1)
  • Weatherproof (17)
  • Welded (85)
  • Woven (12)
  • Show More...

• Configuration

  

  • BLANK (1)
  • C (22)
  • E (3)
  • L (6)
  • LB (47)
  • LL (21)
  • LR (18)
  • SLOTTED (3)
  • SOLID (5)
  • T (38)
  • TB (16)
  • UB (5)
  • X (11)
  • Show More...

• Minimum Qty

  

  • 10 (92)
  • 100 (8)
  • 1000 (5)
  • 12 (2)
  • 120 (1)
  • 20 (26)
  • 250 (1)
  • 2500 (14)
  • 50 (8)
  • 6 (3)
  • 600 (1)
  • Show More...

• Standard Package

  

  • 1 (2)
  • 1 PER CASE (32)
  • 10 (24)
  • 10 PER CARTON (60)
  • 100 PER BAG (1)
  • 100 PER CARTON (6)
  • 100 W (13)
  • 12 (26)
  • 12 PER CARTON (4)
  • 15 (8)
  • 15 PER CARTON (4)
  • 16 (5)
  • 18 PER CARTON (3)
  • 2 (2)
  • 20 (49)
  • 20 PER CARTON (8)
  • 24 (4)
  • 24 in (11)
  • 24 PER CARTON (2)
  • 25 (27)
  • 25 PER CARTON (145)
  • 25 PER CASE (29)
  • 28 Per Case (1)
  • 3 (2)
  • 3 in (1)
  • 3 PER CARTON (2)
  • 30 (7)
  • 30 PER CASE (1)
  • 35 per Case (1)
  • 4 (7)
  • 4 PER CARTON (7)
  • 40 (6)
  • 40 PER CASE (1)
  • 48 in (3)
  • 48 PER CARTON (3)
  • 5 (2)
  • 5 in (3)
  • 5 PER CARTON (20)
  • 50 (3)
  • 50 FT (49)
  • 50 PER CARTON (14)
  • 50 PER CASE (2)
  • 6 (17)
  • 6 PER CARTON (4)
  • 8 (5)
  • 8 W (7)
  • 9 (4)
  • BULK (36)
  • Show More...

• Temperature Rating

  

  • 105?° C (6)
  • 105?°C (30)
  • 150?°C (2)
  • -20 TO 80 DEG C (1)
  • -25 To 40 Deg C (61)
  • -25 To 60 Deg C (17)
  • -25° to 40°C (1)
  • -40 to + 60 Degrees C (12)
  • -40 to 121 Deg C (6)
  • -40 To 275 Deg F (1)
  • -40 To 300 Deg F (1)
  • 90 (9)
  • 90?°C (4)
  • Show More...

• Enclosure Type

  

  • Class I Div 1 2 Group a B C D;Class II Div 1 Group E F G;Class II Div 2 Group F G;Class III (1)
  • Class I Div 1 and 2 Group C D;Class II Div 1 and 2 Group E F G;Class III (16)
  • Class I Div 2;Class II Div 1 and 2;Class III;NEMA 3R (8)
  • Class I Div 2;NEMA 3R (6)
  • Class I Div 2;NEMA 3R;NEMA 4;NEMA 4X (22)
  • Class I Group A B C D;Class II Group E F G;Class III (5)
  • Conduit Outlet Box (1)
  • Indoor/Outdoor (1)
  • Nema 3R (9)
  • Nema 4 (56)
  • NEMA 4/4X/12/13 (18)
  • NEMA 5-15R (1)
  • NEMA 6 and 4X (4)
  • NEMA FB-1 (35)
  • NEMA/EEMAC 3;NEMA/EEMAC 4 (3)
  • Type 4 / 4X (1)
  • Type 4X (3)
  • Show More...

• Hub Location

  

  • (1) EACH END (6)
  • (1) Each Side (3)
  • (1) End (8)
  • (1) Side (1)
  • (1) Side;(1) Down (5)
  • (2) Side (10)
  • (2) Side, (1) Top (4)
  • (3) Side (6)
  • (4) Side (5)
  • 45 Degree (4)
  • 90 DEG (1)
  • 90 Degree (44)
  • 90º (36)
  • BOTTOM, SIDE (1)
  • Cross (6)
  • End (5)
  • Side (7)
  • Straight (22)
  • TEE (17)
  • TEE BACK (8)
  • Tee Side (23)
  • Show More...

• Number Of Knockouts

  

  • 1 (6)
  • 10 (6)
  • 11 (5)
  • 12 (4)
  • 13 (14)
  • 14 (2)
  • 15 (2)
  • 16 (10)
  • 17 (9)
  • 2 (13)
  • 20 (1)
  • 22 (2)
  • 24 (2)
  • 24 in (1)
  • 26 (2)
  • 3 (12)
  • 4 (21)
  • 5 (25)
  • 6 (7)
  • 7 (25)
  • 8 (11)
  • 9 (14)
  • Show More...

• Knockouts

  

  • (1) 1/2 in (18)
  • (1) 1/2 in_(1) 1/2 in (16)
  • (1) 1/2 in_(1) 3/4 in (1)
  • (1) 1/2 in_(2) 1/2 in (2)
  • (1) 1/2 in_(2) 3/4 in (2)
  • (1) 1/2 in_2-cable (1)
  • (12) 1/2" (1)
  • (2) 1/2 in, (2) 1/2 in, (1) 3/4 in E (12)
  • (2) 1/2 in, (2) 3/4 in (1)
  • (2) 1/2 in, (2) 3/4 in_(1) 1/2 in, (1) 3/4 in (1)
  • (2) 1/2 in, (2) 3/4 in_(2) 1/2 in, (2) 3/4 in (3)
  • (3) 1/2 in (6)
  • (3) 1/2 in, (2) 3/4 in (19)
  • (4) 1/2 in, (4) 3/4 in_(2) 1/2 in, (2) 3/4 in (1)
  • (4) 1/2 in, (4) 3/4 in_(4) 1/2 in, (4) 3/4 in (1)
  • (4) 1/2" (2)
  • (4) 3/4";(8) 1/2" (2)
  • (5) 1/2 in (4)
  • (6) 1/2 in and 3/4 in concentric_(2) 1/2 in and 3/4 in concentric (1)
  • (6) 1/2 in, (4) 3/4 in_(1) 1/2 in, (1) 3/4 in (4)
  • (6) 1/2 in, (4) 3/4 in_(1) 3/4 in, (1) 1 in (4)
  • (6) 1/2 in, (6) 3/4 in_(6) 1/2 in, (6) 3/4 in (1)
  • (8) 1/2 in, (8) 3/4 in_(8) 1/2 in, (8) 3/4 in (1)
  • (8) 1/2" (1)
  • (8) 1/2", (4) 1/2", (1) 3/4" E (1)
  • (8) 1/2", (4) 3/4" (3)
  • (8) 3/4" (1)
  • 0 (122)
  • 1 (4)
  • 1/2 IN and 3/4 IN Holes;7 (1)
  • 1/2 in;1 in;1/2 - 3/4 in Combination (TKO) (1)
  • 1/2 in;1/2 - 3/4 in Combination (TKO) (3)
  • 1/2 in;1-1/4 in;1/2 - 3/4 in Combination (TKO) (1)
  • 1/2 in;3/4 in (2)
  • 1/2 in;3/4 in;1 in (1)
  • 1/2" and 3/4" double row (2)
  • 1/2" and 3/4" single row (2)
  • 10 (7)
  • 11 (6)
  • 12 (8)
  • 13 (6)
  • 16 (4)
  • 17 (6)
  • 20 (2)
  • 22 (2)
  • 24 (2)
  • 26 (2)
  • 3 (1)
  • 3, 1/2 IN and 3/4 IN Holes (1)
  • 3, 1/2 IN Holes (1)
  • 3, 3/4 IN Holes (3)
  • 3/4 in (1)
  • 4 (6)
  • 4 knockouts (2)
  • 4, 1/2 IN Holes (1)
  • 4, 3/4 IN Holes (3)
  • 5 (5)
  • 5, 1 IN Holes (1)
  • 6 (2)
  • 7 (7)
  • 7, 1/2 IN Holes (2)
  • 8 (9)
  • 9 (7)
  • Electrogalvanized Steel (1)
  • FALSE (33)
  • For Airport, Healthcare, Petroleum And Convenience Store, Restaurant And Hospitality (1)
  • NO (50)
  • true (15)
  • Yes (31)
  • Show More...

• Cover Type

  

  • 2-gang cover riser (1)
  • Brass (4)
  • Brass (Cover) (2)
  • Brass Flip Lid (2)
  • CLEAR (1)
  • Continuous Hinge, Snap Latch (1)
  • cover riser (3)
  • Expandable;In-Use (2)
  • Externally Threaded (1)
  • In-Use (3)
  • Nickel (1)
  • Nickel-Plated (Cover) (2)
  • Plastic (2)
  • Plastic Flip Lid (5)
  • PVC Coated (85)
  • RED URETHANE 2 MIL COATED INTERIOR, GRAY PVC 40 MIL COATED EXTERIOR (ALUMINUM), SCREW ON (1)
  • ROUND (1)
  • Show More...

• Type

  

  • 1-Hole AC/MC Strap (11)
  • 45 DEG Conduit Elbow (6)
  • 45 Degree (6)
  • 45 Degree Liquidtight Non-Insulated Connector (3)
  • 90 Deg Angle Conduit Connector (8)
  • 90 DEG Conduit Elbow (12)
  • 90 Degree (9)
  • 90 degree Angle Fittings (10)
  • 90 Degree Liquidtight Non-Insulated Connector (6)
  • ACCESSORY WALLPACK (4)
  • Adjustable mud ring (5)
  • All threaded rod (6)
  • Aluminum conduit body (8)
  • Beam Clamps (17)
  • Beam Clamps (Series 500) (5)
  • Beam Clamps and Accessories (4)
  • Below Ground Boxes (8)
  • BLANK (10)
  • Blank Clip Cover With Screw (20)
  • BLANK COVER (4)
  • Blank Cover With Screw (11)
  • BOX (50)
  • Box mounting bracket and accessories (9)
  • Break apart conduit clamp (5)
  • BS-A Series Domed Top Design Cover (5)
  • Bullet-45 Degree (4)
  • Bullet-90 Degree (5)
  • Bullet-Straight (6)
  • BUSHING (5)
  • Cable Connector (3)
  • Cable gland (97)
  • Ceiling Boxes (14)
  • Clamp type connector (9)
  • Clevis fitting (8)
  • Close Length Conduit Nipple (10)
  • COMBINATION (4)
  • Concrete Pipe Sleeve (3)
  • Conduit and cable clamp (9)
  • Conduit Body (98)
  • Conduit Body Cover With Gasket (9)
  • Conduit Body Rigid Threaded (9)
  • Conduit Clamps (4)
  • Conduit Coupling (13)
  • Conduit Elbow - Standard Radius (5)
  • Conduit Hub Plate (9)
  • Conduit Nipple (79)
  • Conduit outlet body (314)
  • Conduit outlet body, gasket and cover (6)
  • Conduit outlet box with cover (73)
  • Conduit sealing fitting (39)
  • Conduit sealing fitting with drain (26)
  • Conduit Strut Clamp (15)
  • Conduit, Cable & Pipe Supports (3)
  • CONNECTOR (153)
  • Connectors (12)
  • Connectors-45 Degree (15)
  • Connectors-90 Degree (28)
  • Connectors-Straight (32)
  • Cord grip (19)
  • Cord Grips (12)
  • CORNER ANGLE (14)
  • Corner plate (6)
  • COUPLING (11)
  • COVER (96)
  • cover riser (4)
  • Cover with integral gasket (16)
  • DEAD END (8)
  • DEVICE BOX (35)
  • Device Boxes, Covers & Accessories (5)
  • DRAIN (4)
  • END CAP (6)
  • ENT Flexible Raceway (5)
  • Entrance Caps (10)
  • Expanded fill sealing fitting (11)
  • Expanded fill sealing fitting with drain (7)
  • Extension Rings (12)
  • Extension/Adapter (8)
  • EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting With Removable Nipple (6)
  • E-Z LOCK (3)
  • FEED THROUGH (8)
  • Fittings & Hardware (5)
  • Fittings, Brackets & Hardware (17)
  • Flexcor® Deluxe Strain Relief Cord Grip - Straight Male (5)
  • Flexcor® Strain Relief Grip - Wide Range, Straight Male, Dust Tight (5)
  • Flexcor® Support Grip Standard-Duty - Closed Mesh, Single Eye (4)
  • Floor Box (30)
  • Floor Box cover (4)
  • Flush Service (28)
  • Gang Boxes (5)
  • GANGABLE (5)
  • Gangable, Adjustable, Old/New Work (4)
  • Gangable, New Work (10)
  • Gangable, Wall, New Work (10)
  • Gangable, Wall, Old Work (7)
  • Grounding Connectors-45 degree (9)
  • Grounding Connectors-90 degree (11)
  • Grounding Connectors-Straight (15)
  • Handy Box (4)
  • Handy Box Cover (6)
  • Hanger (6)
  • HUB (19)
  • Integral gasket cover (4)
  • JUNCTION BOX (8)
  • Liquidtight connector (115)
  • Liquidtight Fittings (12)
  • Liquidtight Flexible Non-Metallic Conduit (4)
  • Liquidtight Sealing Gasket (6)
  • Liquidtight Sealing Ring (7)
  • Low Profile In Box (9)
  • Masonry Box (15)
  • Masonry Boxes (8)
  • Metal Channels (41)
  • Metallic Liquidtight Fittings (3)
  • Mogul blank cover (8)
  • Mogul conduit body (30)
  • Mud Ring (4)
  • Multi-Gang Rectangular Floor Boxes & Covers (7)
  • Multi-grip and offset pipe clamp (13)
  • New Work, Wall (3)
  • Nipple (3)
  • Nipples (5)
  • Non-Insulated, Wide Range (3)
  • nVent CADDY All-in-One Stud-Mounted Assemblies (4)
  • O.D. pipe and conduit clamp (27)
  • Octagon box cover (6)
  • Octagon outlet box (18)
  • Octagonal Box (10)
  • Octogonal Boxes (16)
  • OLD WORK (5)
  • OPEN ANGLE (4)
  • OUTLET BOX (17)
  • Outlet Box Covers (82)
  • Outlet Boxes (52)
  • Pipe Clamp (3)
  • Pipe clamps and accessories (7)
  • Pipe Straps, Pipe Clamps & Hangers (Series 700) (46)
  • PIPE/EMT CONDUIT TO STRUT (7)
  • PIPE/RIGID CONDUIT TO STRUT (10)
  • Pipe/Tube to Strut (5)
  • Plastic Box (15)
  • Polymer Concrete Box/Cover (6)
  • Post base (13)
  • Pre-assembled O.D. pipe and conduit clamp (47)
  • Pre-assembled thinwall conduit clamp (6)
  • Push-In Connector (29)
  • RECEPTACLE COVER (9)
  • Recessed Head Close-Up Plug (7)
  • Recessed Plug (4)
  • Reducing Bushings (3)
  • Retrofit sealing fitting (5)
  • Right Angle Clamp (4)
  • Rigid Elbow (10)
  • ROD (6)
  • Rod Coupling (4)
  • ROUND (3)
  • Round Floor Boxes, Covers & Accessories (12)
  • Round WP Cluster Cover (3)
  • Sconce Box (4)
  • Sealing Hub (4)
  • Sealing Locknut (10)
  • Self-retaining gasket (6)
  • Service Entrance LB (6)
  • SINGLE (5)
  • Single Eye (6)
  • SINGLE GANG (6)
  • Snap-on (24)
  • Snaptight cover with integral gasket (4)
  • SPECIAL RADIUS (16)
  • Splice plate (5)
  • Spring Nut (7)
  • Square Box (16)
  • Square Corner Switch Box (9)
  • Square cover (26)
  • Square Cover, Plaster Ring, Mud Ring (14)
  • Square Cover. Plaster Ring, Mud Ring (7)
  • Square extension ring (8)
  • Square Head Close-Up Plug (6)
  • Square mud ring (14)
  • Square outlet box (20)
  • Square Raised Surface Cover (16)
  • Square surface cover (26)
  • Square Tile Cover, Plaster Ring, Mud Ring (5)
  • Square washer (9)
  • Squeeze Connector (8)
  • Squeeze Connectors (7)
  • Squeeze type connector (10)
  • ST Series 90 DEG Liquidtight Connector With Plain Throat (12)
  • ST Series Straight Liquidtight Connector With Plain Throat (12)
  • Stainless Steel EMT Compression Union (6)
  • STANDARD RADIUS (108)
  • Standard support grip (4)
  • Steel Cord Grips (10)
  • STNM Series 90 DEG Liquidtight Connector (5)
  • STNM Series Straight Liquidtight Connector (6)
  • STRAIGHT (74)
  • Straight Cord Connector (11)
  • Straight Liquidtight Non-Insulated Connector (7)
  • Straight Liquidtight Strain Relief Connector (18)
  • STRAIGHT MALE (33)
  • Straight Male Thread (7)
  • Strain relief dust tight grip (7)
  • STRAP (4)
  • Strut (21)
  • Strut & Strut Accessories (5)
  • Strut back-to-back welded channel (12)
  • Strut channel (42)
  • Strut channel nuts (8)
  • Strut pipe clamps and fittings (16)
  • Stud Mounted Box Brackets (4)
  • Switch box (23)
  • Switch Boxes (21)
  • Tee and cross flat fitting (5)
  • THREADED FEMALE (36)
  • Threaded Products & Hardware (Series 100) (10)
  • Tile wall square cover (6)
  • Two Gang Lug (6)
  • Type B Liquidtight Tubing & Fittings (4)
  • Type C (5)
  • Type C Conduit Outlet Body (18)
  • Type C, Threaded (6)
  • Type LB Conduit Outlet Body (24)
  • Type LB Set Screw (6)
  • Type LB, Threaded (10)
  • Type LL (5)
  • Type LL Conduit Outlet Body (18)
  • Type LL, Threaded (7)
  • Type LR (5)
  • Type LR Conduit Outlet Body (18)
  • Type LR, Threaded (7)
  • Type SR Gold Seal Strain Relief Straight Connector (9)
  • Type T Conduit Outlet Body (21)
  • Type T, Threaded (7)
  • Type TB Conduit Outlet Body (13)
  • Type X Conduit Outlet Body (13)
  • U-Bolt (5)
  • Universal breather/drain (3)
  • Utility / Canadian Cabinets and Splitters (7)
  • Utility box cover (7)
  • Utility Boxes (5)
  • Wall/Ceiling Fixture (4)
  • Weather Proof Cover (8)
  • Weatherproof box (8)
  • Weatherproof Cover (25)
  • Weatherproof Covers (10)
  • Wedge nut cover (23)
  • Wedge nut cover with integral gasket (13)
  • While In Use Cover (6)
  • While-in-Use cover (4)
  • Wire Holder (5)
  • Wiremesh Grips (5)
  • Show More...

• Thread Size

  

  • 0.375 (3)
  • 0.5 (2)
  • 0.63 in (4)
  • 0.66 in (1)
  • 0.72 in (1)
  • 1 in (21)
  • 1 in NPT (9)
  • 1/2 - 13 (3)
  • 1/2 in (37)
  • 1/2 in - 13 (1)
  • 1/2 in NPT (11)
  • 1/2 in;12.7 mm (1)
  • 1/2 INCH (1)
  • 1/2 Inch Threaded (2)
  • 1/4 - 20 (2)
  • 1/4 in - 20 (1)
  • 1-1/2 in (3)
  • 1-1/2 in NPT (8)
  • 1-1/4 in (2)
  • 1-1/4 in NPT (6)
  • 1-1/4 in;31.8 mm (1)
  • 2 in (3)
  • 2 in NPT (10)
  • 2-1/2 in NPT (3)
  • 3 in NPT (5)
  • 3/4 in (32)
  • 3/4 in NPT (11)
  • 3/4 in;19 mm (1)
  • 3/8 - 16 (2)
  • 3/8 in - 16 (1)
  • 3/8 in NPT (3)
  • 3/8-16 (1)
  • 4 in NPT (3)
  • Show More...

• Mounting

  

  • (1) Screw Ear (2)
  • (2) 1/2 Inch Knockout, Bottom (1)
  • (2) 1/2 Inch Knockout, Internal Screw with Adjustable Slider Plate (1)
  • (2) ANGLED MID NAIL (3)
  • (2) Angled Mid Nails (5)
  • (2) Angled Nails (2)
  • (2) Angled Nails, Stabilizing Bracket (1)
  • (2) Ear, Snap Bracket, Grounding Strap (1)
  • (2) Ears (1)
  • (2) EARS, SNAP BRACKET (4)
  • (2) EARS, WING BRACKET (3)
  • (2) Fetter Ring Nail (2)
  • (2) Fetter Ring Nail, Ground Strap (1)
  • (2) Fetter Ring Nails (2)
  • (2) Nails (1)
  • (2) Screw Ear (2)
  • 1 inch NPT (4)
  • 1/2 In S Bracket (2)
  • 1/2 In Setback VP Bracket (2)
  • 1/2 inch NPT (3)
  • 1/2 INCH OFFSET Z HANGER (1)
  • 1/2 Inch Offset Z Hanger, Adjustable Stabilizing Bar (1)
  • 16 Inch adjustable bar hanger (2)
  • 16 TO 24 INCH ADJUSTABLE BAR HANGER (4)
  • 16 to 24 Inch Adjustable Bar Hanger, Ground Strap (3)
  • 2 inch NPT (1)
  • 2-3/4 Inch Tapped (1)
  • 3/4 inch NPT (4)
  • 5/16" (2)
  • 5/8 In Setback S Bracket (4)
  • 7/8 In Setback S Bracket (1)
  • ADJUSTABLE BAR HANGER (1)
  • ANGLED MID NAIL (6)
  • Angled Mid Nail, Adjustable Stabilizing Bar (1)
  • Angled Mid Nail, Fetter Ring Nail (1)
  • Angled Mid Nails (6)
  • ANGLED NAIL (1)
  • Angled nails (1)
  • Angled side nails (3)
  • Back Nails (1)
  • Between Enclosure and Conduit (6)
  • BOTTOM (1)
  • BOX (16)
  • brackets (1)
  • C BRACKET (3)
  • Captive nails (2)
  • CEILING (18)
  • Ceiling mount (1)
  • CEILING/WALL (1)
  • CHANNEL (116)
  • Clamp and Screw (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (6)
  • Compound angled nails (1)
  • Conduit (65)
  • Consult the Factory for Mounting Recommendations (20)
  • Detachable Lug (4)
  • DEVICE (29)
  • EAR (13)
  • Ear, Wing Bracket (1)
  • Face Bracket (1)
  • Face Bracket, Hanger (1)
  • Fetter Ring Nails (1)
  • flange & swing tab (1)
  • flanges (1)
  • flanges & wing tabs (1)
  • FLOOR (8)
  • Floor Box Mount (2)
  • FLUSH (15)
  • hanger bar (3)
  • Hold Tite Bracket (1)
  • Hold Tite, Ear (1)
  • HORIZONTAL (2)
  • Horizontal Or Vertical - Nail-On To Wood Studs (1)
  • HORIZONTAL/VERTICAL (2)
  • Internal Screw with Adjustable Slider Plate for Substrate 1/2 to 1-3/8 Inch (4)
  • Internal Steel Stud, (2) 1/2 Inch Knockouts (1)
  • L BRACKET (1)
  • L bracket and nails (1)
  • Lag Screws (1)
  • Locknut or Tapped Hole (7)
  • Locknut or Tapped Opening (43)
  • Lugs (1)
  • Metal Ear (1)
  • Metal Wing Bracket/Metal Ear Wall Compression (4)
  • Metal Wing Bracket/Non-Metal Flange Floor/Ceiling Compression (1)
  • Metal Wing Brackets/Metal Ears Wall Compression (1)
  • Metal Wing Brackets/Nonmetal Ears Wall Compression (1)
  • Mounting Ears & (2) Swing Clamps (1)
  • Mounting Ears and Captive Nails (1)
  • Mounts flush against structure. (6)
  • Mounts in either horizontal or vertical direction. (1)
  • Mounts on Cord Grip (1)
  • N bracket (1)
  • Nail-On (12)
  • nail-on & steel stud bracket (1)
  • Nails (1)
  • No (2)
  • No bracket (9)
  • PAD (28)
  • Portable (1)
  • Push In (6)
  • RBLG-3604 (2)
  • Recessed Angled Nails (1)
  • Recessed Ceiling (1)
  • Recessed Wall (3)
  • Rigid Conduit (6)
  • SCREW (7)
  • Screw And Washer (3)
  • Screw Hook or Beam Clamp (4)
  • Screw Mount (1)
  • Screw or Nail fastening (1)
  • Screw or nail Tab (2)
  • Screw-In (36)
  • Screws (22)
  • SNAP BRACKET (1)
  • Snap In Mount (4)
  • Snap-On (1)
  • Staggered side tabs allow mounting between studs; or use recessed holes on back box for flush mount (1)
  • Standard (3)
  • Steel/Wood Stud, Screw (1)
  • STUD (1)
  • Stud Mount Z Hanger Bracket with 1/4 Inch Offset (1)
  • SURFACE (24)
  • Surface/Flush (2)
  • Swing clamps (2)
  • VERTICAL (6)
  • Vertical or Horizontal (2)
  • VMS Bracket (2)
  • VS Bracket (1)
  • WALL (29)
  • WALL MOUNT (14)
  • Wall Mounting (3)
  • Wall, Floor (1)
  • Wing Bracket/Non-Metal Flange Floor/Ceiling Compression (4)
  • With Arrow-Hart Switch, Without Overload Protection (1)
  • Yes (4)
  • Show More...

• Connector Type

  

  • CAT5/5E Connector (1)
  • CAT6 Connector (1)
  • Combination (5)
  • Compression (15)
  • Duplex (1)
  • E-Z Lock® (1)
  • FMC (31)
  • Jacketed MC/TECK (2)
  • Liquidtight (11)
  • LiquidTight, Insulated (3)
  • Nonmetallic (1)
  • Nonmetallic, Screw-on (1)
  • Screw In (2)
  • Screw-In (8)
  • Screw-In, Insulated (6)
  • SET SCREW (3)
  • Single Screw Strap-Type, Insulated (1)
  • Single Screw, Strap Type (2)
  • SOCxSOC (1)
  • Squeeze (24)
  • Squeeze, Insulated (9)
  • STRAIGHT (11)
  • STRAIGHT MALE (4)
  • Straight Nonmetallic (4)
  • Straight, Insulated (3)
  • Threaded (2)
  • Two Screw Strap Type (1)
  • Two Screw, Strap Type (5)
  • Two-Screw, Strap Type (12)
  • U Shaped (1)
  • U Shaped, Insulated (1)
  • Show More...

• Cable Entry

  

  • (1) Each End (9)
  • (1) Each Side (3)
  • (1) End (13)
  • (1) Side (1)
  • (1) Side, (1) Down (7)
  • (2) 1/2 Inch Knockouts (3)
  • (2) 1/2 Inch Knockouts, Clamp (1)
  • (2) Knockout (1)
  • (2) Molded-In Speed Clamp (1)
  • (2) Molded-In Speed Klamps (1)
  • (2) Non-Metallic Speed Clamp (2)
  • (2) One End, (1) Other End (1)
  • (2) Side (15)
  • (2) Side, (1) Down (2)
  • (2) Wire Clamps (1)
  • (3) Side (18)
  • (4) Knockouts, (2) Recessed Buttons (1)
  • (4) Molded-In Speed Klamps (3)
  • (4) PVC Speed K Clamps (2)
  • (4) Side (14)
  • (4) Side, (1) Down (1)
  • 0.50 (6)
  • 0.75 (19)
  • 1 (9)
  • 1" hub (1)
  • 1.5 (1)
  • 1/2" hub (1)
  • 2 (1)
  • 3/4" hub (1)
  • 4 integral wire clamps (1)
  • 4 knockouts (2)
  • 4 v-clamps (1)
  • 5 knockouts on the top and 4 knockouts/slots along the bottom for cable access (1)
  • 6 integral wire clamps (1)
  • 8 integral wire clamps (1)
  • 8 wire clamps (1)
  • Black (6)
  • Dead End (3)
  • Feed Through (10)
  • Female Threaded, Male Threaded (3)
  • Hubs (1)
  • Knockouts (7)
  • Knockouts for conduit (9)
  • KO (23)
  • Lock-In tabs for NM cable (1)
  • Molded Speed Clamps (1)
  • No (30)
  • NON METALLIC SPEED CLAMP (1)
  • NON-METALLIC SHEATHED CABLE (14)
  • Non-Metallic Sheathed Cable Clamp (1)
  • Non-Metallic Sheathed Cable, Plated Carbon Steel Clamp (2)
  • Non-Metallic Sheathed Cable, PVC Speed Clamp (12)
  • Non-Metallic Sheathed Cable, Speed Clamp (3)
  • Non-Metallic Speed Clamp (23)
  • Not Standard (8)
  • One-Piece (10)
  • Phenolic entrance to Aluminum clamp type for Rigid/IMC (10)
  • Plastic (1)
  • Pry-in (1)
  • Push-In tabs for NM cable (2)
  • Silver (2)
  • Single rectangular entry point (2)
  • Top Knockouts (8)
  • Two piece steel clamp with tabs to insert through knockout (4)
  • Show More...

• Knockout Size

  

  • (14) 1/2 to 3/4 Inch (Sides), (6) 1/2 Inch and (4) 3/4 Inch (Bottom) (1)
  • (16) 1/2 to 3/4 Inch (Sides), (6) 1/2 Inch and (4) 3/4 Inch (Bottom) (1)
  • (2) 1/2 in (1)
  • (2) 1/2 Inch Bottom, (2) 1/2 Inch Side (1)
  • 0.370 in (2)
  • 0.755 in (1)
  • 1 in (10)
  • 1 in (Side);1 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 1 in (Side);3/4 in (Side);1 in (End);3/4 in (End);1/2 in (Bottom);3/4 in (Bottom);1 in (Bottom) (1)
  • 1/2 in (92)
  • 1/2 in (Bottom) (6)
  • 1/2 in (Bottom);1/2 in (Side) (15)
  • 1/2 in (Bottom);1/2 in (Side);1/2 in (End) (4)
  • 1/2 in (Bottom);1/2 in (Side);3/4 in (End) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Eccentric Knockout Bottom);1 in (Side) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Eccentric Knockout Bottom);1/2 in (Side);1/2 to 3/4 in (Eccentric Knockout Side) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Eccentric Knockout Bottom);3/4 in (Side) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Moon Knockout Bottom);1/2 in (Side);1/2 to 3/4 in (Side) (1)
  • 1/2 in (Bottom);1/2 to 3/4 in (Moon Knockout Bottom);1/2 in (Side);1/2 to 3/4 In(Moon Knockout Side) (1)
  • 1/2 in (Bottom);2-1/32 in (Bottom);1/2 in (Side);2-1/32 in (End) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);1 in (Side) (3)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side) (1)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);1/2 to 3/4 in (Concentric Knockout Side) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);3/4 in (Side) (6)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);3/4 in (Side);1/2 in (End);3/4 in (End) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);3/4 in (Side) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);3/4 in (Side);1 in (Side) (1)
  • 1/2 in (Bottom);3/4 in (Eccentric Bottom);1/2 in (Side);3/4 in (Eccentric Side) (1)
  • 1/2 in (Bottom);3/4 in (Side) (2)
  • 1/2 in (Bottom);3/4 in (Side);3/4 in (End) (3)
  • 1/2 in (Side) (1)
  • 1/2 in (Side);1/2 in (End);3/4 in (Bottom);1/2 in (Bottom) (2)
  • 1/2 in (Side);1/2 in (End);3/4 in (End);1/2 in (Bottom) (1)
  • 1/2 in (Side);1/2 in (End);3/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 1/2 in (Side);3/4 in (Side) (2)
  • 1/2 in (Side);3/4 in (Side);1/2 in (End);3/4 in (End);1/2 in (Bottom);3/4 in (Bottom) (1)
  • 1/2 in (Side);3/4 to 33/64 in (Side);1/2 in (End);3/4 to 33/64 in (End);1/2 in (Bottom);3/4 in (Bottom) (1)
  • 1/2 in;21/32 in (2)
  • 1/2 in;3/4 in (15)
  • 1/2 Inch Bottom (3)
  • 1/2 to 3/4 in (Concentric Knockout Side);1/2 to 3/4 in (Concentric Knockout End);1/2 to 3/4 in (Concentric Knockout Bottom) (2)
  • 1/2 to 3/4 in (Conduit Concentric) (4)
  • 1-1/2 in (4)
  • 1-1/2 in (Side);1-1/2 in (End);2-1/2 in (Bottom) (4)
  • 1-1/4 in (6)
  • 1-1/4 in (Side);1-1/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 1-19/32 in (1)
  • 19/32 in (1)
  • 2 in (4)
  • 21/32 in (1)
  • 3/4 in (28)
  • 3/4 in (Side);3/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (4)
  • 3/8 in (2)
  • 3-1/2 in (1)
  • Side:(2) 1/2 in;Bottom:(1) 1/2 in (1)
  • Show More...

• Bend Radius

  

  • 10.5 INCH (11)
  • 10.50 in (1)
  • 13 in (3)
  • 13 INCH (8)
  • 15 in (1)
  • 15 INCH (8)
  • 16 in (2)
  • 16 INCH (9)
  • 24 INCH (9)
  • 3.25 in (1)
  • 30 INCH (1)
  • 36 in (1)
  • 36 INCH (10)
  • 4 INCH (1)
  • 4.25 in (3)
  • 4.25 INCH (5)
  • 4.5 in (2)
  • 4.5 INCH (5)
  • 4-1/2 Inch (2)
  • 48 INCH (1)
  • 5.75 in (3)
  • 5.75 INCH (9)
  • 7.25 in (2)
  • 7.25 INCH (11)
  • 8.25 in (4)
  • 8.25 INCH (7)
  • 8.27 Inch (1)
  • 8-1/4 Inch (1)
  • 9.5 in (4)
  • 9.5 INCH (8)
  • Show More...

• Depth

  

  • 0.562 (1)
  • 0.75 (1)
  • 0.955 (1)
  • 1 (1)
  • 1 3/8" (2)
  • 1.03125 (1)
  • 1.125 (1)
  • 1.5 (9)
  • 1.670 (1)
  • 1.850 (1)
  • 1.875 (1)
  • 1.88 INCH (INSIDE) (1)
  • 1-1/2 (22)
  • 1-1/4 INCH (2)
  • 1-1/8 (5)
  • 1-11/16 INCH (2)
  • 1-11/32 (1)
  • 12 (1)
  • 13.530000000000000 (1)
  • 13/16 In (29)
  • 1-3/4 INCH (2)
  • 14 (2)
  • 15.890000000000000 (1)
  • 1-5/8 (23)
  • 1-5/8 In (25)
  • 1-5/8 INCH (1)
  • 1-7/8 (2)
  • 18.460000000000000 (1)
  • 2 (28)
  • 2 INCH (2)
  • 2.107 (1)
  • 2.125 (7)
  • 2.19 INCH (INSIDE) (2)
  • 2.375 (1)
  • 2.625 (6)
  • 2.625 cu. in. (1)
  • 2.954 (1)
  • 21.77 (553) in (mm) (1)
  • 21.920000000000000 (1)
  • 2-1/2 (6)
  • 2-1/2 INCH (5)
  • 2-1/8 (22)
  • 2-13/116 Inch (1)
  • 2-15/16 Inch (3)
  • 2-27/32 INCH (2)
  • 2-3/4 (4)
  • 2-3/4 INCH (4)
  • 2-3/8 INCH (2)
  • 2-5/16 INCH (1)
  • 2-5/8 INCH (1)
  • 2-7/16 INCH (4)
  • 2-7/8 INCH (4)
  • 3 INCH (7)
  • 3.085 (1)
  • 3.312 (1)
  • 3.5 INCH (2)
  • 3.500 (5)
  • 3.875 (1)
  • 3-1/16 INCH (1)
  • 3-1/2 (5)
  • 3-1/4 In (12)
  • 3-1/4 INCH (7)
  • 3-13/16 Inch (2)
  • 3-3/16 INCH (1)
  • 3-3/4 INCH (1)
  • 3-3/4 INCH (INSIDE) (1)
  • 3-3/8 INCH (1)
  • 36.630000000000000 (1)
  • 3-7/16 INCH (1)
  • 3-9/16 INCH (18)
  • 4 (2)
  • 4 INCH (INSIDE) (3)
  • 5.145 (1)
  • 5.159 (3)
  • 5.160 (10)
  • 5.283 (1)
  • 5/8 INCH (1)
  • 6 INCH (1)
  • 6.01 Inch (1)
  • 7.75 (1)
  • Show More...

• Thickness

  

  • 0.013 in (1)
  • 0.1 (2.54) in (mm) (1)
  • 0.100 in (1)
  • 0.112 in (2)
  • 0.322 in;0.817 cm (2)
  • 0.38 in (1)
  • 0.55 in (1)
  • 0.8 in (1)
  • 0.89 in (1)
  • 1.125 in (1)
  • 1.13 in (1)
  • 1.26 in (1)
  • 1/16 (1)
  • 1/4 in (22)
  • 1/4 in;6.3 mm (3)
  • 1/4 INCH (7)
  • 1/8 in (1)
  • 11 ga (2)
  • 11 in;3 mm (1)
  • 11/64 in (1)
  • 12 AWG (17)
  • 12 AWG;2.6 mm (6)
  • 12 ga (9)
  • 12 ga;2.6 mm (2)
  • 12 GAUGE (6)
  • 14 AWG (8)
  • 14 AWG;1.9 mm (4)
  • 14 ga (16)
  • 14 ga;1.9 mm (4)
  • 14 GAUGE (5)
  • 15/64 in (2)
  • 16 (2)
  • 16 ga (5)
  • 16 ga;1.5 mm (1)
  • 3/16 in (5)
  • 3/8 in (2)
  • 4.8" (1)
  • 5/16 in (1)
  • 7/32 in (1)
  • Show More...

• Size

  

  • 0.29 in x 4 in x 5 in (2)
  • 0.375 (4)
  • 0.75 (4)
  • 0.75 in x 4.688 in x 4.688 in (2)
  • 1 (54)
  • 1 1/2 (3)
  • 1 1/4 (3)
  • 1 1/4" NPT (3)
  • 1 in (58)
  • 1 In (Rigid), 1-1/4 In (EMT) (2)
  • 1 in;25 mm (1)
  • 1 INCH (29)
  • 1" (3)
  • 1" NPT (4)
  • 1" NPT, Size 1 (2)
  • 1.13 in x 0.55 in x 1.1 in (3)
  • 1.26 IN X 0.827 IN X 0.259 IN (2)
  • 1.29 in x 0.55 in x 1.1 in (3)
  • 1.46 Inch Height (3)
  • 1.56 in x 0.5 in x 2.3 in (2)
  • 1.575 IN X 1.575 IN X 0.461 IN (2)
  • 1.64 Inch Height (3)
  • 1.64 Inch Width (2)
  • 1.67 Inch Height (3)
  • 1.73 Inch Height (2)
  • 1.79 Inch Height (3)
  • 1.81 in x 0.71 in x 1.6 in (3)
  • 1.83 Inch Height (3)
  • 1.83 Inch Width (3)
  • 1.88 in x 1.88 in x 2.45 in (2)
  • 1.908 IN X 1.053 IN X 0.299 IN (2)
  • 1.98 Inch Height (2)
  • 1.992 IN X 0.75 IN X 0.35 IN (2)
  • 1/2 (56)
  • 1/2 in (97)
  • 1/2 In (EMT) (3)
  • 1/2 In (Rigid), 3/4 In (EMT) (2)
  • 1/2 IN Hub (4)
  • 1/2 in;15 mm (1)
  • 1/2 In-13 TPI (3)
  • 1/2 INCH (36)
  • 1/2" (2)
  • 1/2" NPT (8)
  • 1/2" NPT, Size 1 (2)
  • 1/4 in (7)
  • 1/4 In-20 TPI (3)
  • 10-5/8 In Length (2)
  • 1-1/2 (23)
  • 1-1/2 in (34)
  • 1-1/2 INCH (14)
  • 1-1/4 (18)
  • 1-1/4 in (30)
  • 1-1/4 In Height (4)
  • 1-1/4 in;32 mm (1)
  • 1-1/4 INCH (16)
  • 1-1/4 Inches (4)
  • 1-1/4" (1)
  • 14/2 AWG;12/2 AWG (1)
  • 14/3 AWG;12/3 AWG (1)
  • 16 cu in (4)
  • 1-7/8 In Width X 2-1/16 In Height (3)
  • 1-Gang (10)
  • 2 (29)
  • 2 1/2 (3)
  • 2 in (39)
  • 2 In Width X 1-1/2 In Depth X 3 In Height (2)
  • 2 In Width X 2 In Depth X 3 In Height (2)
  • 2 In Width X 2-1/2 In Depth X 3 In Height (9)
  • 2 In Width X 3-1/2 In Depth X 3 In Height (7)
  • 2 INCH (15)
  • 2 Inches (2)
  • 2 X 2.5 X 3 (4)
  • 2 X 3.5 X 3 (2)
  • 2.04 Inch Height (6)
  • 2.125 X 1.875 X 4 (3)
  • 2.27 Inch Width (3)
  • 2.35 Inch Height (2)
  • 2.5 (2)
  • 2.6 Inch Height (3)
  • 2.750 IN Width X 4.500 IN Length X 2.625 IN Depth (2)
  • 2.82 Inch Height (4)
  • 2.83 Inch Height (2)
  • 2-1/2 (8)
  • 2-1/2 in (13)
  • 2-1/2 Inch (6)
  • 2-1/2 Inches (2)
  • 25 cu in (2)
  • 2-Gang (8)
  • 3 (16)
  • 3 1/2 (3)
  • 3 in (18)
  • 3 INCH (8)
  • 3 Inches (3)
  • 3 Inches Height x 2 Inches Width x 2-1/2 inches depth (8)
  • 3 Inches Height x 2 Inches Width x 2-1/4 inches depth (2)
  • 3 Inches Height x 2 Inches Width x 2-3/4 inches depth (6)
  • 3 Inches Height x 2 Inches Width x 3-1/2 inches depth (4)
  • 3" (1)
  • 3.08 Inch H (3)
  • 3.6 Inch Height (4)
  • 3.75 x 2.25 x 2.71 (4)
  • 3.75 x 2.25 x 2.87 (8)
  • 3.83 Inch Height (2)
  • 3/4 (71)
  • 3/4 in (110)
  • 3/4 In (Rigid), 1 In (EMT) (2)
  • 3/4 IN Hub (8)
  • 3/4 in;20 mm (1)
  • 3/4 INCH (28)
  • 3/4" (2)
  • 3/4" NPT (4)
  • 3/4" NPT, Size 1 (2)
  • 3/8 (27)
  • 3/8 in (28)
  • 3/8 In Diameter (3)
  • 3/8 IN Flex, 1/2 IN Hub (3)
  • 3/8 In-16 TPI (2)
  • 3/8 INCH (9)
  • 3/8" (2)
  • 30 in x 17 in x 2 in (3)
  • 3-1/2 (5)
  • 3-1/2 in (5)
  • 3-1/2 In (Rigid/EMT) (2)
  • 3-1/2 In Length (2)
  • 3-1/2 In Width X 2-1/4 In Height (2)
  • 3-1/2 In Width X 3-1/2 In Height (3)
  • 3-1/2 In Width X 4-1/8 In Height (3)
  • 3-1/2 In Width X 5-3/8 In Height (8)
  • 3-1/2 Inches Diameter x 1-1/2 Inch depth (2)
  • 3-1/4" (2)
  • 3-3/4 In Width X 3-15/16 In Height (3)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 3-1/2 Inches Depth (2)
  • 3-Gang (2)
  • 4 (20)
  • 4 round x 1.625 deep (5)
  • 4 in (18)
  • 4 In Diameter X 1/2 In Depth (3)
  • 4 in. in diameter (5)
  • 4 INCH (8)
  • 4 Inches (54)
  • 4 Inches Diameter x 1/2 Inch depth (11)
  • 4 Inches Diameter x 2-1/8 Inches depth (4)
  • 4 Inches Height x 4 Inches Width x 1-1/2 Inches depth (10)
  • 4 Inches Height x 4 Inches Width x 2-1/8 Inches depth (9)
  • 4 Inches Length x 2-1/8 Inches Width (7)
  • 4 Inches Length x 2-1/8 Inches Width x 1-7/8 Inches Depth (3)
  • 4 Inches Length x 2-1/8 Inches Width x 2-1/8 Inches Depth (2)
  • 4 Inches Length x 4 Inches Width (2)
  • 4 Inches Length x 4 Inches Width x 1-1/2 Inches Depth (6)
  • 4 Round (2)
  • 4 X 2.125 (6)
  • 4 X 4 (4)
  • 4 X 4 X 0.25 (2)
  • 4 X 4 X 0.5 (17)
  • 4 X 4 X 0.625 (3)
  • 4 X 4 X 0.75 (2)
  • 4 X 4 X 1 (2)
  • 4 X 4 X 1.25 (3)
  • 4 X 4 X 1.5 (13)
  • 4 X 4 X 2 (2)
  • 4 X 4 X 2.125 (8)
  • 4" (55)
  • 4.25" (4)
  • 4.33 Inch H (3)
  • 4.5 H x 2.75 W x 2 D (13)
  • 4.5 H x 2.75 W x 2.625 D (3)
  • 4.5 H x 4.5 W x 2.125 D (13)
  • 4.5 H x 4.5 W x 2.656 D (2)
  • 4.50 x 2.75 x 1.825 (2)
  • 4.50 x 4.50 x 2.24 (2)
  • 4.53 X 4.53 (4)
  • 4.56 X 2.81 (2)
  • 4.59 x 2.82 x 2.75 (2)
  • 4.63 x 2.86 x 2.09 (2)
  • 4.6875 X 4.6875 X 0.5 (4)
  • 4.6875 X 4.6875 X 0.625 (2)
  • 4.6875 X 4.6875 X 1.25 (1)
  • 4.6875 X 4.6875 X 2.125 (5)
  • 4-11/16 (3)
  • 4-11/16 Inches (14)
  • 4-11/16 Inches Height x 4-11/16 Inches Width x 2-1/8 Inches depth (4)
  • 4-11/16" (27)
  • 5 in (1)
  • 5" (24)
  • 5.0" (Depth) x 5.34" (Width) x 7.40" (Height) (2)
  • 5.25 H x 3.5 W x 1.5 D (3)
  • 5.25" (3)
  • 5/16 in (2)
  • 6 In Length X 6 In Width X 3-1/2 In Height (9)
  • 6 in;150 mm (1)
  • 6" (22)
  • 6.5" (5)
  • 7 IN X 1.072 IN X 0.75 IN (2)
  • 7/16 In Diameter (3)
  • 7-1/4 In Length (6)
  • 9/16 In Diameter (3)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (12)
  • F2 (11)
  • F3 (7)
  • F4 (2)
  • L(0.500) x W(2.533) x H(2.655) (1)
  • L(0.860) x W(0.876) x H(0.876) (1)
  • L(1.040) x W(1.040) x H(1.827) (2)
  • L(1.200) x W(0.400) x H(0.600) (1)
  • L(1.390) x W(1.000) x H(1.000) (2)
  • L(1.410) x W(0.850) x H(0.850) (3)
  • L(1.410) x W(1.410) x H(1.545) (1)
  • L(1.420) x W(1.420) x H(2.376) (2)
  • L(1.497) x W(4.398) x H(1.836) (2)
  • L(1.550) x W(1.125) x H(1.125) (2)
  • L(1.664) x W(1.664) x H(2.425) (2)
  • L(1.890) x W(1.890) x H(2.530) (2)
  • L(1.930) x W(1.930) x H(1.975) (1)
  • L(2.305) x W(2.460) x H(2.460) (1)
  • L(2.428) x W(2.428) x H(2.293) (1)
  • L(2.682) x W(3.645) x H(3.645) (2)
  • L(2.874) x W(4.107) x H(4.107) (2)
  • L(3.461) x W(4.575) x H(1.653) (2)
  • L(3.875) x W(4.800) x H(3.811) (2)
  • L(3.875) x W(4.800) x H(5.623) (1)
  • L(4.110) x W(3.740) x H(3.510) (1)
  • L(4.111) x W(1.450) x H(0.534) (2)
  • L(4.250) x W(3.572) x H(2.375) (1)
  • L(4.260) x W(3.260) x H(0.312) (3)
  • L(4.620) x W(2.853) x H(1.498) (1)
  • L(4.625) x W(4.562) x H(1.744) (1)
  • L(4.655) x W(3.750) x H(4.047) (2)
  • L(4.934) x W(7.186) x H(5.159) (3)
  • L(4.937) x W(2.850) x H(3.725) (2)
  • L(5.700) x W(5.700) x H(0.125) (3)
  • L(5.750) x W(5.750) x H(0.468) (6)
  • L(5.866) x W(5.866) x H(3.500) (2)
  • L(5.870) x W(5.870) x H(2.237) (2)
  • L(5.970) x W(4.100) x H(3.738) (2)
  • L(6.050) x W(4.875) x H(2.400) (2)
  • L(6.094) x W(13.546) x H(0.750) (2)
  • L(6.094) x W(9.288) x H(0.750) (3)
  • L(6.156) x W(6.437) x H(6.100) (7)
  • L(6.550) x W(6.625) x H(3.775) (2)
  • L(6.818) x W(7.930) x H(3.875) (1)
  • L(6.942) x W(6.254) x H(3.750) (2)
  • L(7.012) x W(9.058) x H(5.160) (3)
  • L(7.186) x W(4.934) x H(5.160) (3)
  • L(7.522) x W(4.802) x H(6.000) (2)
  • L(7.740) x W(3.740) x H(3.510) (1)
  • L(8.000) x W(5.750) x H(5.160) (2)
  • L(9.058) x W(7.012) x H(5.160) (2)
  • Length from 14-1/2 Inches to 26-1/2 Inches (2)
  • Standard (4)
  • Standard Sized (12)
  • Show More...

• Capacity

  

  • 1 cu.in (Vertical);1 cu.in (Horizontal) (1)
  • 10 cu.in (1)
  • 10.3 cu.in (3)
  • 10.5 cu.in (2)
  • 10.8 cu.in (1)
  • 100 lb;444.8 N (1)
  • 1000 lb (1)
  • 1000 lb, 4.45 kN (Design Load 1);250 lb, 1.11 kN (Design Load 2);200 lb, 0.89 kN (Design Load 2) (1)
  • 10-3/4 cu.in (Vertical);12-1/4 cu.in (Horizontal) (2)
  • 111.8 Cubic Inch (1)
  • 12 cu.in (3)
  • 12 Inch (1)
  • 12.2 cu.in (5)
  • 12.20 cu.in;0.2 dm^3 (2)
  • 12.5 cu.in (13)
  • 1200 lb;5.34 kN (1)
  • 13 cu.in (6)
  • 13.5 cu.in (1)
  • 1350 lb;6 kN (1)
  • 14 CU INCH (1)
  • 14 cu.in (12)
  • 14 Cubic Inch (1)
  • 14 ga (1)
  • 14.5 cu.in (5)
  • 140 lb;622.7 N (1)
  • 15 CU INCH (2)
  • 15 cu.in (1)
  • 15.5 cu.in (16)
  • 15.8 cu.in (9)
  • 16 CU INCH (2)
  • 16 cu.in (11)
  • 16 Cubic Inch (1)
  • 16.1 cu.in (4)
  • 16.5 cu.in (1)
  • 16.5 Cubic Inch (1)
  • 16.8 cu.in (1)
  • 1650 lb (3)
  • 17 cu.in (4)
  • 18 CU INCH (1)
  • 18 cu.in (24)
  • 18.5 cu.in (3)
  • 18/0.29 cu.in/dm^3 (1)
  • 183.5 cu.in (1)
  • 183.50 cu.in;3.0 dm^3 (1)
  • 19 cu.in (1)
  • 19 cu.in (Vertical);22-3/4 cu.in (Horizontal) (2)
  • 1900 lb (1)
  • 2 cu.in (1)
  • 2 cu.in (Vertical);2 cu.in (Horizontal) (1)
  • 20 cu.in (7)
  • 20.3 cu.in (1)
  • 20.5 CU INCH (2)
  • 20.5 cu.in (5)
  • 20.5 Cubic Inch (3)
  • 200 lb (5)
  • 206 lb;916.3 N (1)
  • 21 CU INCH (1)
  • 21 cu.in (13)
  • 21.0 cu.in (1)
  • 21.5 cu.in (4)
  • 2150 lb (1)
  • 22 cu.in (15)
  • 22.5 CU INCH (1)
  • 22.5 cu.in (10)
  • 22.5 Cubic Inch (2)
  • 2200 lb (1)
  • 23 CU INCH (1)
  • 23 cu.in (8)
  • 23.5 Cu Inch (1)
  • 24 CU INCH (1)
  • 24 cu.in (2)
  • 24.5 cu.in (1)
  • 24.5 Cubic Inch (4)
  • 25 Cu Inch (1)
  • 25 cu.in (3)
  • 25 Cubic Inch (1)
  • 25-1/2 cu.in (Vertical);30 cu.in (Horizontal) (1)
  • 26.5 cu.in (1)
  • 28 cu.in (1)
  • 29 cu.in (1)
  • 29.5 cu.in (3)
  • 3 cu.in (Vertical);3-3/4 cu.in (Horizontal) (1)
  • 3.5 Cu Inch (1)
  • 3.5 cu.in (3)
  • 30 cu.in (8)
  • 30.3 cu.in (15)
  • 30.5 cu.in (8)
  • 3000 lb (1)
  • 308 cu.in (1)
  • 31.8 cu.in (1)
  • 32 cu.in (4)
  • 32.3 Cu Inch (1)
  • 32.3 cu.in (2)
  • 32.30 cu.in;0.5 dm^3 (1)
  • 32.5 cu.in (2)
  • 32.5 Cubic Inch (1)
  • 33.8 cu.in (1)
  • 33.80 cu.in;0.6 dm^3 (1)
  • 3-3/4 cu.in (2)
  • 34 cu.in (1)
  • 35 cu.in (1)
  • 35.3 cu.in (1)
  • 35.8 cu.in (1)
  • 350 lb (2)
  • 3500 lb (1)
  • 36 cu.in (2)
  • 37 cu.in (3)
  • 4 cu.in (2)
  • 4.2 Cu Inch (1)
  • 4.30 cu.in;0.1 dm^3 (1)
  • 4.35 cu.in (5)
  • 4.35 cu.in;0.1 dm^3 (3)
  • 4.5 cu.in (2)
  • 40 Cubic Inch (1)
  • 400 lb (1)
  • 400 lb, 1.78 kN (Design Load 1);50 lb, 0.22 kN (Design Load 2, 3) (4)
  • 42 cu.in (10)
  • 42 Cubic Inch (1)
  • 42.1 cu.in (1)
  • 42.5 Cubic Inch (1)
  • 43.5 cu.in (2)
  • 44 cu.in (2)
  • 46 cu.in (2)
  • 47 cu.in (1)
  • 48 cu.in (1)
  • 5 cu.in (13)
  • 5.5 cu.in (1)
  • 50 to 100 cu.in (1)
  • 500 lb;2.22 kN (1)
  • 52 cu.in (2)
  • 55 cu.in (1)
  • 550 lb (2)
  • 56 cu.in (Vertical);64-1/2 cu.in (Horizontal) (1)
  • 56.5 cu.in (2)
  • 58 cu.in (2)
  • 6 cu.in (7)
  • 6 cu.in (Vertical);8 cu.in (Horizontal) (1)
  • 6.5 cu.in (1)
  • 6.7 Cu Inch (2)
  • 60 cu.in (4)
  • 600 lb, 2.67 kN (Design Load 1);75 lb, 0.33 kN (Design Load 2, 3) (2)
  • 600 lb;2.67 kN (1)
  • 61 cu.in (1)
  • 61.2 cu.in (1)
  • 63.5 cu.in (1)
  • 64 cu.in (2)
  • 66 cu.in (1)
  • 68 cu.in (1)
  • 69.50 cu.in (1)
  • 69.7 cu.in (3)
  • 69.70 cu.in;1.1 dm^3 (1)
  • 7 cu.in (9)
  • 7.3 cu.in (4)
  • 7.30 cu.in;0.1 dm^3 (4)
  • 7.33 cu.in;0.1 dm^3 (1)
  • 7.5 cu.in (6)
  • 70 cu.in (1)
  • 71 cu.in (1)
  • 71.2 cu.in (2)
  • 71.20 cu.in;1.2 dm^3 (1)
  • 73 cu.in (1)
  • 74.8 CU INCH (1)
  • 74.8 cu.in (2)
  • 75 cu.in (1)
  • 75 lb (1)
  • 750 lb (9)
  • 8 CU INCH (1)
  • 8 cu.in (8)
  • 800 lb (9)
  • 9 cu.in (4)
  • 9.5 cu.in (1)
  • 90 cu.in (1)
  • 90.5 Cubic Inch (1)
  • 900 lb (2)
  • 94 CU INCH (1)
  • 94 cu.in (1)
  • 94 Cubic Inch (1)
  • 95 cu.in (Vertical);110 cu.in (Horizontal) (1)
  • 97.4 cu.in (1)
  • Various Cable Diameter Ranges (20)
  • Show More...

• Diameter

  

  • 0.205 in (Inner);0.29 in (Outer) (1)
  • 0.25 in (1)
  • 0.252 in (Inner);0.343 in (Outer) (1)
  • 0.375 in (1)
  • 0.395 to 0.638 in (Cable) (1)
  • 0.4 in (1)
  • 0.460 to 0.610 in (Cable) (1)
  • 0.469 to 0.610 in (Cable) (1)
  • 0.5 in (1)
  • 0.55 in (1)
  • 0.618 in (1)
  • 0.622 to 0.642 in (ID);0.82 to 0.84 in (OD) (1)
  • 0.78 in (1)
  • 0.813 in (4)
  • 0.82 to 0.84 in (ID);1.03 to 1.05 in (OD) (1)
  • 0.820 to 0.840 in (Outer);0.622 to 0.642 in (Inner) (3)
  • 0.90 in (1)
  • 0.91 in (1)
  • 0.92 INCH (7)
  • 0.94 in;23.9 mm (2)
  • 0.97 in (1)
  • 0.975 in (9)
  • 1 in (5)
  • 1 in (1 Hole);7/8 in (2 Hole);1-5/16 in (3 Hole) (1)
  • 1 in;25.4 mm (1)
  • 1.01 in (1)
  • 1.029 in (1)
  • 1.077 in (2)
  • 1.125 in (1)
  • 1.13 INCH (4)
  • 1.19 in (2)
  • 1.220 in (8)
  • 1.23 in (10)
  • 1.244 in (1)
  • 1.25 in (6)
  • 1.25 in;31.8 mm (5)
  • 1.250 in (2)
  • 1.27 in (1)
  • 1.277 in (1)
  • 1.290 in (1)
  • 1.38 in;35.1 mm (1)
  • 1.395 INCH (3)
  • 1.4 in (1)
  • 1.40 in;35.6 mm (2)
  • 1.420 in (1)
  • 1.421 in (1)
  • 1.43 in (2)
  • 1.46 in (2)
  • 1.48 in (2)
  • 1.5 in (2)
  • 1.5 in;37.5 mm (1)
  • 1.5 in;38.1 mm (1)
  • 1.50 in;38.1 mm (1)
  • 1.514 in (1)
  • 1.55 in (1)
  • 1.563 in (5)
  • 1.57 in (1)
  • 1.583 in (1)
  • 1.605 in (2)
  • 1.63 in;41.4 mm (1)
  • 1.648 in (1)
  • 1.656 in (4)
  • 1.664 in (1)
  • 1.7 in (1)
  • 1.71 in;43.4 mm (1)
  • 1.74 in (1)
  • 1.74 INCH (4)
  • 1.75 in (2)
  • 1.75 in;44.5 mm (2)
  • 1.76 in (2)
  • 1.78 in (2)
  • 1.81 in;45.9 mm (2)
  • 1.820 in (1)
  • 1.890 in (1)
  • 1.925 in (1)
  • 1.98 INCH (5)
  • 1/2 in (Hole) (4)
  • 101.6 mm (2)
  • 11/16 in;27 mm (1)
  • 1-1/2 in (4)
  • 1-1/8 in (6)
  • 1-11/16 in (3)
  • 1-11/16 in;42.9 mm (2)
  • 1-13/32 in (2)
  • 1-13/32 in (Hole) (1)
  • 1-19/35 in (Hole) (1)
  • 1-21/32 in;42.1 mm (4)
  • 13/16 in (1)
  • 1-3/16 in (1)
  • 1-3/4 in (2)
  • 1-3/4 in (3 Hole);1-1/8 in (4 Hole) (2)
  • 1-3/8 in (5)
  • 1-3/8 in;34.9 mm (5)
  • 15/16 in (3)
  • 15/16 in;23.8 mm (1)
  • 15/16 in;33.3 mm (1)
  • 1-5/16 in;33.3 mm (1)
  • 15/32 in;29.4 mm (1)
  • 1-5/8 in (1)
  • 1-7/16 in (3)
  • 1-7/32 in (2)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (5)
  • 2 in (2)
  • 2.10 in (1)
  • 2.115 in (1)
  • 2.25 in (7)
  • 2.250 in (1)
  • 2.31 in;58.7 mm (2)
  • 2.38 in (1)
  • 2.4 in (1)
  • 2.418 in (1)
  • 2.438 in (3)
  • 2.440 in;61.98 mm (1)
  • 2.455 INCH (2)
  • 2.460 in (1)
  • 2.533 in (1)
  • 2.550 in (1)
  • 2.63 in;66.8 mm (1)
  • 2.67 in (1)
  • 2.7 in (1)
  • 2-1/16 in (1)
  • 2-1/2 in (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-11/16 in (2)
  • 2-23/32 in;69.1 mm (3)
  • 2-3/16 in (1)
  • 23/16 in;55.6 mm (1)
  • 2-3/16 in;55.6 mm (1)
  • 23/32 in;53.2 mm (1)
  • 2-5/16 in (1)
  • 25/32 in (Hole) (1)
  • 2-5/8 in (1)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (7)
  • 3 in;76.2 mm (1)
  • 3..813 in (1)
  • 3.15 in (1)
  • 3.150 in (1)
  • 3.19 in;81 mm (2)
  • 3.28 in (1)
  • 3.36 in (1)
  • 3.383 in (2)
  • 3.389 in (1)
  • 3.420 in (1)
  • 3.58 INCH (5)
  • 3.645 in (1)
  • 3/8 in (2 Hole);7/16 in (3 Hole) (1)
  • 3-1/2 in (3)
  • 3-1/2 INCH (6)
  • 3-1/4 in (2)
  • 31/4 in;82.6 mm (1)
  • 3-1/4 in;82.6 mm (5)
  • 3-1/8 in (1)
  • 31/8 in;79.4 mm (1)
  • 3-1/8 in;79.4 mm (1)
  • 3-13/64 in (1)
  • 3-15/16 in (1)
  • 3-3/8 in (2)
  • 3-3/8 in;85.7 mm (1)
  • 3-5/16 in (1)
  • 3-7/8 in (1)
  • 4 in (42)
  • 4 in;101.6 mm (18)
  • 4 INCH (8)
  • 4.107 in (1)
  • 4.188 in (3)
  • 4.38 in;111.2 mm (1)
  • 4.38 in;111.3 mm (1)
  • 4.575 in (1)
  • 4.75 in (1)
  • 4.93 in (1)
  • 4-1/16 in (1)
  • 4-1/2 in;114.3 mm (1)
  • 4-1/8 in (1)
  • 4-1/8 in;10.5 cm (1)
  • 4-3/4 INCH (1)
  • 4-7/16 in (1)
  • 4-7/8 in (1)
  • 5.11 in (1)
  • 5.5 in (1)
  • 5.50 in (1)
  • 5.599 in (1)
  • 5.69 in (4)
  • 5.75 in (1)
  • 5.750 in (1)
  • 5.83 INCH (4)
  • 5.870 in (1)
  • 5/16 in (1)
  • 5-1/2 in (2)
  • 5-1/2 in;139.7 mm (1)
  • 6.5 in (1)
  • 7/16 in (1 Hole);5/8 in (2 Hole);3/4 in (3 Hole) (1)
  • 7/16 in (2 Hole);1/2 in (3 Hole) (1)
  • 7/16 in (2 Hole);5/8 in (3 Hole) (1)
  • 9/16 in (1)
  • 9/16 in (1 Hole);3/4 in (2 Hole);1 in (3 Hole) (1)
  • Internal:1-1/2 (1)
  • Internal:2 (1)
  • Internal:2-1/2 (1)
  • Internal:3-1/2 (1)
  • Internal:4-1/2 (1)
  • Show More...