Narrow By:

• Product Type:Straight Blade Plug
• Product Type:Elastogrip Plug, 15A 125V, 5-15P
• Product Type:Plug 15A 125V 2P3W STR Autogrip BK
• Product Type:Plug 15A 250V 2P3W STR BW
• Product Type:Plug Angle 15A 125V 2P3W Vinyl STR Yl
• Product Type:Plug
• Product Type:Plug, Ang, 3P4W, 50A 3PH 250V, 15-50P, BK
• Product Type:Plug Angle, 20A 125V, 5-20P, B/W
• Product Type:Valise Plug, 15A 125V, 5-15P, Yl
• Product Type:Plug Thermo Rubber 15A 125V 2P2W STR BK
• Product Type:Plug, 15A 250V, 6-15P, B/W
• Product Type:Plug, 3P4W, 30A 125/250V, 14-30P
• Product Type:Plug, 3P4W, 50A 3PH 250V, 15-50P, BK
• Product Type:Valise Plug, 15A 125V, 5-15P, Insul-D, BK
• Product Type:Plug 15A 250V 2P3W Vinyl STR Yl
• Product Type:Plug Angle 15A 125V 2P3W STR Poly BW
• Product Type:Plug Thermo Rubber 15A 125V 2P3W STR BK
• Product Type:Plug, 20A 125V, Sel Spec, 5-20P
• Product Type:Plug, 3P4W, 50A 125/250V, 14-50P
• Product Type:Plug, Angle, 15A 125V, 5-15P, B/W
• Product Type:Plug 15A 250V 2P3W STR Autogrip BW
• Product Type:Plug, W/Tight, 6-20P, 20A, 250V, Yl
• Product Type:STR BLD Plug 3W 15A 250V B&W
• Product Type:STR BL IP67 Plug 15A 125V 5-15P Anti-Mic
• Product Type:Straight Blade Device Plug
• Product Type:Straight Blade Max Grip Plug
• Product Type:STR BLD Angle Plug 3W 15A 125V
• Product Type:STR BLD GCM Plug 3W 15A 125V
• Product Type:STR BLD Plug 3W 20A 125V HG
• Product Type:STR BLD Rubber Plug 20A 125V 5-20P

• Product Type

  

  • 1/2 In STR Strain RLF Conn (2)
  • 3/16 In. 2 Cutter SDS Carbide Bit (2)
  • 3M™ Performance Plus™ Wire Connectors (6)
  • 4 Wire Ground TB 1.5 MM2 (2)
  • 52"Ceiling Fan (8)
  • Baffle Trim (2)
  • Bandsaw Blade (6)
  • Bandsaw Blades 3PK Compact (2)
  • Blade Receptacle (2)
  • Buss High Speed Fuse (4)
  • Buss Plug Fuse Type W (2)
  • Cabinet Tip Screwdriver (3)
  • Ceiling Fan (2)
  • Closure Plug (3)
  • Compact Band Saw Blade (4)
  • Conduit Body (6)
  • Connector (14)
  • Cord Connector (18)
  • Cordcon, STR ML, .75-.88", 3/4", Nyl, Gy (2)
  • CR 50A 250VDC/600VAC T/L Plug (2)
  • Cutting Plier (3)
  • Decorator Duplex Receptacle (2)
  • Decorator Receptacle (5)
  • Deluxe Cord Grip (2)
  • Duplex Receptacle (57)
  • Electrician's Scissor (3)
  • Emt Compression Connector (8)
  • Emt Set Screw Connector (3)
  • Fan Blade (2)
  • Flexible Connector (3)
  • Folding Jab Saw (2)
  • Folding Utility Knife (3)
  • Fusetron Dual Element (3)
  • Fusetron Dual Element Fuse Type T (4)
  • Fusetron Fuse (14)
  • Fustat Dual Element Plug (2)
  • General Purpose Relay (4)
  • Gfci TR Deco Duplex 20A 125V Iv (2)
  • Ground Hub (8)
  • Ground Rod Clamp (2)
  • Hacksaw 218HE 12 X1/2X023X18 100/PK (2)
  • Hacksaw 232HE 12 X1/2X023X32 100/PK (2)
  • Hacksaw Blade (2)
  • Heavy Duty Side Cutting Pliers (2)
  • High Tension Hacksaw (3)
  • Hole Saw (5)
  • Insulated Connector (7)
  • Insulating Bushing (7)
  • Jab Saw (3)
  • Keystone-Tip (3)
  • Latching Relay 120VAC Coil (2)
  • Led Tape Light (27)
  • Liquid Tight Connector (3)
  • Liquid Tight Straight Connector (37)
  • Liquidtight Conduit Connector (2)
  • Locking Device Connector (3)
  • Locking Device Plug (23)
  • Locking Device Turnlock Connector (8)
  • Locking Device Turnlock Plug (17)
  • Locking Plug (7)
  • Low-Peak Time-Delay 300K (3)
  • Magnetic Nut Driver (7)
  • Metal Blade (9)
  • Metal Tapered Baffle With Ring (2)
  • Metal-Cutting Blade (6)
  • Metallic Liquidtight Fittings (2)
  • Modular Plug (3)
  • Non CTL Plug on Circuit Breaker (3)
  • Non Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Liquid Tight Straight Fitting (2)
  • Nonmetallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Straight Connector (6)
  • Pin and Sleeve Plug (6)
  • PLG PWRMT 150A 3W4P .875-1.906 Rev Conts (2)
  • Plug-In Adapter (3)
  • Plug-In Relay (9)
  • Pocket Knife (3)
  • Porta-Band 44-7/8X1/2X023X14TW 3/PK (2)
  • Power Fuse (40)
  • Power Outlet Angle Plug (8)
  • Powermate Plug (6)
  • Rec Dup TR 20A125V2P3W Controldual WH (2)
  • Recep Dup 15A/125V Side Wire Gray (2)
  • Recep Dup 20A/125V Side Wire Brown (2)
  • Recep Dup 20A/125V Side Wire Iv (2)
  • Recessed Straight Blade Receptacle (2)
  • Reciprocating Saw Blade (4)
  • Recips 156R 12X3/4X050X6 5/PK (2)
  • Recips 676RC 6X7/16X050X 6 5/PK (2)
  • Recp CO/Alr Duplex 15A 125V 2P3W STR Iv (2)
  • Recp Deco Dup 20A 125V 2P3W B/Swire Iv (2)
  • Recp Deco Duplex 15A 125V 2P3W Gy (2)
  • Recp Single 15A 125V 2P3W STR Swire WH (2)
  • Recp Single 20A 250V 2P3W Swire BR (2)
  • Recp Single TR 15A125V 2P3W STR Swire Iv (2)
  • Recp Single TR 15A125V 2P3W STR Swire La (2)
  • Recp TR Deco Duplex 20A 125V 2P3W W (2)
  • Replacement Blade (2)
  • Rigid Conduit Reducing Bushing (3)
  • Sawzall Blade (6)
  • Sawzall® Blades (2)
  • Screw STD WLPLT Repl 1/2" WH (2)
  • Screwdriver Set (2)
  • Self Test Duplex Receptacle (3)
  • Sierraplex Receptacle (3)
  • single Receptacle (20)
  • Socket (5)
  • Squeeze Connector (14)
  • STR BLD Conn 3W 15A 125V HG (2)
  • STR BLD Maxgrip Plug 3W 15A 125V Y (2)
  • STR Male, DCG, .62-.75", 1/2" W/Mesh (2)
  • STR Male, DCG, .87-1.0", 1" W/Mesh (2)
  • STR Male, DCG, 1.0-1.1", 1.25" W/Mesh (2)
  • Straight Blade Connector (12)
  • Straight Blade Device Connector (2)
  • Straight Blade Duplex Receptacle (8)
  • straight blade Receptacle (24)
  • Straight Tip Chandelier Filament Bulb, 40W Equivalent, B11 S (2)
  • Straight Wall (3)
  • Strain Relief Grip (2)
  • Super-Safeway Plug (2)
  • Switch Duplex Comb SP/SP 15A 120V Al (2)
  • Switch Duplex Comb SP/SP 15A 120V WH (2)
  • Terminal (2)
  • T-Handle Set With Stand (2)
  • Time Delay Fusetron Fuse (14)
  • Time Delay Power Fuse (7)
  • Toggle Combination Switch (2)
  • Torch Carbide Teeth (4)
  • Tron Fast Acting Fuse (2)
  • Tron Fast Acting Fuse Class T (8)
  • Turnlok Plug 3W 15A 125V (2)
  • Utility Blade (2)
  • Wallplate 4G Decorator Poly Mid Al (2)
  • Wallplate 4G Toggle Poly Mid Al (2)
  • Watertight Plug (4)
  • Watertite Plug (2)
  • Weatherproof Closure Plug (4)
  • Welding Material, Cadweld Plus (3)
  • Wiring Trough (2)
  • Z-Wave Plus Dimmer 300W White (2)
  • Z-Wave Plus Switch SP 15A 120V (2)
  • Show More...

• Brand

  

  • 3M (2)
  • 3M Electrical Products (3)
  • ABB (2)
  • Air King (2)
  • Amfico (3)
  • Anamet (2)
  • Appleton (47)
  • ARLINGTON (5)
  • Arlington Industries (7)
  • Arrow Hart (26)
  • Brady® (2)
  • Bridgeport (51)
  • Bridgeport Fittings (2)
  • BURNDY (2)
  • CALBRITE (6)
  • Carlon (7)
  • COOPER WIRING DEVICES (92)
  • CRAFTMADE (13)
  • Craftmade International I (2)
  • Crouse-Hinds (4)
  • Diode Led (30)
  • Eaton (356)
  • Eaton Bussmann series (16)
  • Eaton Corp (6)
  • EATON CUTLER-HAMMER (13)
  • Eaton Wiring Devices (65)
  • EDISON (34)
  • Edison Fuses (2)
  • ERICSON (2)
  • GREENLEE (7)
  • HALO (6)
  • Hubbell Wiring Device-Kellems (27)
  • Hubbell Wiring Devices (34)
  • Hubbell--Killark (3)
  • Hubbell--Raco (3)
  • Ideal (36)
  • IDEC CORPORATION (14)
  • Keystone (3)
  • KILLARK (27)
  • Klein Tools (142)
  • legrand (2)
  • LEGRAND-ON-Q (2)
  • LEGRAND-PASS & SEYMOUR (60)
  • LENOX (37)
  • LH DOTTIE (11)
  • Littelfuse (8)
  • Maxim Lighting (2)
  • Mersen (15)
  • MIDWEST (2)
  • Milwaukee Electric Tool (11)
  • Milwaukee® (168)
  • Mulberry (3)
  • Nsi Industries (3)
  • Nuvo (2)
  • nVent ERICO (4)
  • Nvent Hoffman (35)
  • O-Z/GEDNEY (4)
  • Pass & Seymour (19)
  • Pass & Seymour/Legrand (7)
  • Pass and Seymour (198)
  • Peco Fasteners (4)
  • Peco Fasteners, Inc. (6)
  • PLASTIBOND (12)
  • Platinum Tools (5)
  • Powr-Gard(R) (6)
  • Powr-Pro(R) (6)
  • PVC & Accessories (8)
  • Quazite (3)
  • Scotchlok (2)
  • Southwire (7)
  • Southwire Rough Electrical Com (2)
  • SPEED SLOT[R], T3[TM] (3)
  • Steel City (2)
  • SUPERFLEX LTD. (6)
  • T&B Ind Fitting (25)
  • T2[TM] (2)
  • TURCK (6)
  • Veolia (2)
  • Viton(R) (5)
  • WIHA TOOLS (2)
  • WIREMOLD (2)
  • WIRING DEVICE-KELLEMS (94)
  • Woodhead (10)
  • Show More...

• Current Rating

  

  • 10 A (21)
  • 100 A (9)
  • 100 AMPERE (2)
  • 110 AMPERE (2)
  • 125 AMPERE (2)
  • 15 (12)
  • 15 A (93)
  • 15 AMPERE (2)
  • 150 A (2)
  • 150 AMPERE (2)
  • 175 AMPERE (2)
  • 20 (28)
  • 20 A (103)
  • 200 A (4)
  • 200 AMPERE (3)
  • 225 AMPERE (2)
  • 250 AMPERE (2)
  • 30 (6)
  • 30 A (42)
  • 30/50 A (5)
  • 300 AMPERE (2)
  • 350 AMPERE (2)
  • 400 A (2)
  • 400 AMPERE (3)
  • 50 (5)
  • 50 A (19)
  • 500 AMPERE (2)
  • 60 A (7)
  • 600 AMPERE (2)
  • 70 A (3)
  • 70 AMPERE (2)
  • 80 A (2)
  • 80 AMPERE (2)
  • 90 AMPERE (2)
  • Show More...

• Voltage Rating

  

  • 12 V dc (3)
  • 120 (5)
  • 120 V (13)
  • 120 V ac (9)
  • 120/208 (3)
  • 120/240 V (10)
  • 120/277 (4)
  • 120/277 V ac (3)
  • 125 (147)
  • 125 A (3)
  • 125 V (65)
  • 125 V ac (20)
  • 125 V;125/250 (2)
  • 125 VAC (10)
  • 125/250 (11)
  • 125/250 V ac (18)
  • 125V (7)
  • 24 V ac (2)
  • 24 V dc (4)
  • 240V (9)
  • 250 (29)
  • 250 V (9)
  • 250 V ac (37)
  • 250 V ac;125 V dc (6)
  • 250 VAC (7)
  • 250 VAC, 125 VDC (5)
  • 250 VAC/VDC (8)
  • 250;600 (12)
  • 277 (7)
  • 277 V ac (2)
  • 277/480 (2)
  • 3 Phase 250 (2)
  • 3 Phase 480 (3)
  • 300 V (5)
  • 300 Vac, 160 Vdc (5)
  • 32 VDC (10)
  • 35 kV (2)
  • 3Ø 480V (3)
  • 480 (13)
  • 480 V (6)
  • 480 V ac (5)
  • 500 V (2)
  • 600 (15)
  • 600 V (9)
  • 600 V ac @ 50 to 400 Hz 250 V dc (5)
  • 600 V ac 3 Phase @ 50 to 400 Hz 250 V dc (4)
  • 600 V ac;250 V dc (4)
  • 600 V ac;300 V dc (13)
  • 600 VAC (17)
  • 600 VAC At 50 - 400 HZ, 250 VDC (6)
  • 600 VAC AT 50 TO 400 HZ, 250 VDC (20)
  • 600 Vac, 300 Vdc (4)
  • 600 VAC, 50 to 400 Hz, 250 VDC (4)
  • 600 VAC/VDC (8)
  • 600V (3)
  • Show More...

• Number Of Poles

  

  • 1 (7)
  • 2 (221)
  • 2 A (3)
  • 3 (54)
  • 3 in (2)
  • 4 (12)
  • Show More...

• Number Of Wires

  

  • 2 (5)
  • 3 (304)
  • 3 in (2)
  • 3.0 (13)
  • 3-Wire (60)
  • 3-Wire Grounding (3)
  • 4 (63)
  • 4-Wire (21)
  • 4-Wire Grounding (2)
  • 5 (4)
  • Show More...

• Number Of Pins

  

  • 11 (4)
  • 5 (2)
  • 8 (12)
  • Show More...

• Color

  

  • Black (45)
  • Black (Handle) (16)
  • Black/Red (5)
  • Black/White (41)
  • Black;White (5)
  • Blake / Grey (2)
  • Blue (7)
  • Brown (16)
  • Clear (2)
  • Colorless (3)
  • Gray (96)
  • Gray (Exterior Coating);Red (Interior Coating) (3)
  • Green (3)
  • GREEN/YELLOW (2)
  • Grey (5)
  • Ivory (32)
  • Light Almond (17)
  • Light Blue/Black (Handle) (3)
  • Metallic (28)
  • Natural (3)
  • Orange (4)
  • Orchid (2)
  • Polished Silver (3)
  • Red (5)
  • Sandalwood (2)
  • Silver (2)
  • Silver (Handle) (2)
  • STRGHT BLADE PLG&CONNEC (48)
  • Unpainted (7)
  • White (53)
  • Yellow (28)
  • Yellow (Handle) (6)
  • Yellow Handle (2)
  • Yellow/Black (2)
  • Yellow;Black (6)
  • Yellow;Black (Handle) (3)
  • Show More...

• Material

  

  • — (2)
  • 16 GAUGE GALVANEAL STEEL (2)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (6)
  • 2 MIL Red Urethane Ferrous Metal (Interior), 40 MIL Gray PVC Ferrous Metal (Exterior) (2)
  • ALLOY STEEL (2)
  • Aluminum (28)
  • Aluminum, Copper Free (less than 4/10 of 1%) (3)
  • Bi-Metal (9)
  • Bi-Metal (Teeth) (2)
  • Bi-Metal Steel (3)
  • Body-Copper-free aluminum;Contacts-Brass;External screws-316 stainless steel;Spring tensioner-Patented beryllium copper (12)
  • Body-Copper-Free Aluminum;Contacts-Brass;Spring Tensioner-Patented Beryllium Copper;External Screws-316 Stainless Steel (3)
  • Brass (2)
  • Brass Threads, Plastic Body (7)
  • Carbide Teeth (3)
  • Cast Aluminum (5)
  • Colored Plastic Housing, Zinc Fuse Element (7)
  • Colored plastic housing;Zinc fuse element (3)
  • COMPOSITE (8)
  • Copperfree (4/10 Of 1 PCT Maximum) Aluminum (6)
  • Copper-Free Aluminum (33)
  • Die-Cast Aluminum (3)
  • Diecast Copperfree (4/10 Of 1 PCT) Aluminum (2)
  • Die-Cast Zinc (23)
  • Elastomeric/Composite (9)
  • Epoxy Powder Coated Copper Free Aluminum (10)
  • FERROUS (2)
  • Ferrous Metal (2)
  • FOAM (3)
  • Galvanized Steel (7)
  • Glass Filled PES (2)
  • Glass-Filled Nylon (7)
  • Gray iron alloy (9)
  • Gray Nylon (6)
  • HIGH IMPACT STRENGTH COPPER FREE ALUMINUM (7)
  • High Speed Steel (8)
  • High-Carbon Steel (4)
  • Iron;Malleable (2)
  • Machined Aluminum (3)
  • Malleable Iron (14)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Metal (9)
  • Mild Steel;Steel (34)
  • Neoprene (2)
  • Nickel-plated Brass (Plug Blades and Connector Contacts);NEoTEX(R) Paracril OZO rubber (Outer Housing and Grommet);Stainless Steel (Face Screws);Nylon (Face Insert);Brass (Wire Saddle Clamp) (4)
  • Non-Metallic (7)
  • Nylon (196)
  • Nylon (Housing);Polyester (Blade Holder, Cord Grip);Brass (Blades);Stainless Steel (Shell);Stainless Steel (Terminal Screws ) (3)
  • Nylon (Housing/Cord Clamp);Clear Polycarbonate (Terminal Retainer);Brass (Blades, Terminal Screws);Cold Rolled Steel - Nickel Plated (Terminal Clamp);Steel - Nickel Plated (Assembly Screws) (10)
  • Nylon (Housing/Cord Clamp, Blade Holder);Clear Polycarbonate (Terminal Retainer);Brass (Blades, Terminal Screws);Nickel Plated Steel (Terminal Clamp, Assembly Screws) (3)
  • Nylon (Housing/Cord Clamp, Blade Holder);Clear Polycarbonate (Terminal Retainer);Brass (Contact, Terminal Screws);Nickel Plated Steel (Terminal Clamp, Assembly Screws) (3)
  • Nylon (Outer Shell);Glass-Filled Nylon (Terminal Retainer/Interior Body) (3)
  • Nylon (Outer Shell/Interior Body);Polycarbonate (Terminal Retainer) (13)
  • Nylon (Top Housing);PVC (Bottom Housing) (3)
  • Nylon Top Housing, PVC Bottom Housing (3)
  • Nylon/PVC (5)
  • Painted Steel (3)
  • Plastic (18)
  • Plastic Case with Steel Blade (3)
  • Plastic;Steel (2)
  • Polycarbonate (5)
  • Polymer Concrete (3)
  • Polyurethane (4)
  • PVC (20)
  • Rubber (15)
  • Rubber (Super-Safeway Outer Housing);Stainless Steel (Face Screw);Nylon (Face Insert);Brass (Wire Saddle Clamp);Steel (Cord Clamp Screws) (2)
  • S2 Steel (4)
  • Santoprene[T] Thermoplastic Elastomeric Over Polypropylene (Outer Shell);Nylon (Interior Body) (5)
  • Silicon Bronze (Body;Screw) (2)
  • Stainless Steel (8)
  • Stainless Steel - 316 (2)
  • Stainless Steel (Mesh);Aluminum (Fitting) (2)
  • Stainless Steel (Strand);Aluminum (Body, Nut);Neoprene (Bushing) (2)
  • Steel (115)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Steel, Plastic (2)
  • Steel, Zinc Plated (2)
  • Synthetic Suede (2)
  • Thermoplastic (89)
  • Thermoplastic Elastomer (Body);Holder White Nylon (Blade );Clear polycarbonate (Terminal Retainer);Nickel plated brass (Blades, Terminal Screws );White Nylon (Core );Black Elastomer (Bushing & Cone Seal);Nylon (Gotcha Ring );PBT (Strain Relief Nut) (2)
  • Thermoplastic Rubber (2)
  • Thermoplastic, Polypropylene (Top Housing);Thermoplastic, PVC (Bottom Housing) (3)
  • Tip:Tungsten Carbide (4)
  • Tough Steel (2)
  • UV-Rated Plastic (10)
  • Vinyl (10)
  • Wood;Bi-Metal (Teeth) (2)
  • Zinc (8)
  • Zinc Die Cast (8)
  • Zinc Electroplated Steel (3)
  • Zytel ST801 Nylon (3)
  • Show More...

• Power Rating

  

  • AC:1.1 VA (50Hz);1 VA (60Hz);DC:0.8 W (2)
  • AC:3 VA (50 Hz);2.5 VA (60 Hz);DC:1.5 W (5)
  • Show More...

• Finish

  

  • #4 Polished Finish (3)
  • Baked Powder Epoxy/Polyester Finish (3)
  • Ball burnish (7)
  • Ball Burnished;Mirror Smooth (19)
  • Black (3)
  • BLACK GLOSS (2)
  • Black Oxide (6)
  • Bronze/Dark (4)
  • Electro Zinc Plated (6)
  • Electro Zinc Plated/Chromate Coating (4)
  • Epoxy Powder Coat (2)
  • Galvanized (11)
  • Gloss (2)
  • Gray (2)
  • Journeyman (Handle) (8)
  • Matte (85)
  • Metallic (2)
  • Natural (17)
  • Nickel Plated (Blade, Terminal Screw) (2)
  • Nickel Plated (Plug Blades and Connector Contacts) (4)
  • Nickel Plated (Plug Blades and Connector Contacts);Zinc-plated (Cord Clamp Screw) (2)
  • Nickel Plated (Terminal Clamp, Assembly Screw) (16)
  • NO FINISH (9)
  • Painted;Powder Coat (26)
  • Pewter, Nickel, Silver (2)
  • Phosphate Undercoat or Acrylic Electrocoat (2)
  • Plastic Dipped (Handle) (3)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • SATIN (8)
  • Tin-Plated (2)
  • Two-Tone (2)
  • Untreated (4)
  • white (26)
  • WHITE GLOSS (4)
  • Zinc Electro Plated (8)
  • Zinc Electroplated (14)
  • Zinc Electro-Plated (4)
  • Zinc Electroplated/Chromate Coating (16)
  • Zinc Plated (27)
  • Show More...

• Terminal Type

  

  • Blade (58)
  • Box Terminal (3)
  • Pin (10)
  • Pressure Wire Terminal (4)
  • Screw (53)
  • Screw (Blade) (2)
  • Screw (Pin) (3)
  • Screw;Clamp (17)
  • Show More...

• Diameter

  

  • 0.25 to 0.66 in (Cord) (2)
  • 0.33 to 0.66 in (Cord) (7)
  • 1 in (3)
  • 1.06 in (3)
  • 1.06 INCH (4)
  • 1.11 in (4)
  • 1.11 INCH (4)
  • 1.25 in (2)
  • 1.46 in (2)
  • 1.51 in;0.250 to 0.656 in (Cord) (2)
  • 1.51 in;0.33 to 0.66 in (Cord) (3)
  • 1.516;0.230 to 0.690 in (Cord) (7)
  • 1.527 in;38.74 mm (3)
  • 1.527 in;38.78 mm (5)
  • 1.54 in;0.25 to 0.66 in (Cord) (2)
  • 1.56 in (3)
  • 1.56 INCH (5)
  • 1.61 in (4)
  • 1.61 INCH (5)
  • 1.78 in (Width) (3)
  • 1.85 in;47.1 mm (2)
  • 1.97 in (Width) (6)
  • 1.97 in;50.04 mm (3)
  • 1-1/2 in (4)
  • 1-1/8 in (3)
  • 1-11/16 in;42.9 mm (2)
  • 1-3/16 in (2)
  • 1-3/4 in (2)
  • 1-3/8 in (2)
  • 1-5/16 in;33.3 mm (4)
  • 1-7/16 in (2)
  • 2 in (4)
  • 2.20 in (3)
  • 2.20 in;0.225 to 1.150 in (Cord) (15)
  • 2.20 in;0.750 to 1.150 in (Cord) (4)
  • 2.21 in;56.13 mm (5)
  • 2.29 in (2)
  • 2.34 Inch (5)
  • 2.38 INCH (5)
  • 2.563 in;65.1 mm (3)
  • 2.88 INCH (5)
  • 2-1/8 in (2)
  • 2-11/16 in (2)
  • 2-5/8 in (2)
  • 3.25 in;0.38 to 1.00 in (Cord) (3)
  • 3.43 in (3)
  • 6 INCH (6)
  • Show More...

• Nema Rating

  

  • 1 (38)
  • 10-30 (2)
  • 10-50 (2)
  • 12;13;4;4X (33)
  • 14-30 (2)
  • 14-50 (2)
  • 14-50;NEMA WD-1;WD-6 (2)
  • 15A (12)
  • 3, 3R, 4, 4X (6)
  • 3, 4, 4X (3)
  • 3R (6)
  • 5-15 (2)
  • 5-15P (20)
  • 5-15P;5-15R (2)
  • 5-15P;NEMA WD-1 (3)
  • 5-15R (67)
  • 5-15R;NEMA WD-1 (2)
  • 5-20P (4)
  • 5-20P;5-20R (2)
  • 5-20R (97)
  • 6-15P (4)
  • 6-15R (4)
  • 6-20P (4)
  • 6-20R (8)
  • 6-20R;NEMA WD-1 (2)
  • 6-50 (3)
  • FB-1 (8)
  • L14-20P (2)
  • L14-30P (3)
  • L15-20P (2)
  • L15-30P (2)
  • L16-20P (2)
  • L16-20P;L16-20R (2)
  • L16-30P (2)
  • L16-30P;L16-30R (2)
  • L5-15P (4)
  • L5-20P (2)
  • L5-30P (2)
  • L5-30P;L5-30R (2)
  • L6-20P (2)
  • L7-15P (2)
  • L7-20P (2)
  • L8-20P (2)
  • NEMA 3, 4, 4x (5)
  • NEMA 3, 4, 4X, 7BCD, 9FG (10)
  • NEMA 3;3R;4;4X (4)
  • NEMA 3R and 4 for indoor applications (7)
  • NEMA 4X (6)
  • NEMA 4X, NEMA 6P (8)
  • NEMA 5-15 (5)
  • NEMA 5-15P (4)
  • NEMA 5-15R (6)
  • Nema 5-20R (3)
  • NEMA 6-20 (2)
  • NEMA 6-20R (3)
  • NEMA 6P (2)
  • NEMA L16-30P (2)
  • NEMA WD-1;WD-6 (2)
  • NEMA Wd-6 (3)
  • NEMA Wd-6;NEMA 5-20R (5)
  • Non-NEMA (20)
  • Suitable for use in hazardous locations per Class 1 Div 2 (2)
  • Show More...

• Mounting Type

  

  • Box (21)
  • Cord Mounted (23)
  • DIN Rail Mount (5)
  • DIN Rail Mount/Panel Mount (2)
  • Flush Mount (27)
  • Flush Mount;Wall Mount (2)
  • Plug in Mount (14)
  • Plug Mount (16)
  • Plug-On (5)
  • Plug-On Mount (2)
  • Push-On (3)
  • Recessed Mount (2)
  • Screw Mount (27)
  • Snap-in (2)
  • Wall Mount (80)
  • Show More...

• Length

  

  • 0.55 (2)
  • 1 (3)
  • 1 in (5)
  • 1.03 in (2)
  • 1.05 in (2)
  • 1.13 in (2)
  • 1.24 in (12)
  • 1.29 in (10)
  • 1.296 in (2)
  • 1.30 in (5)
  • 1.32 in (21)
  • 1.320 in (10)
  • 1.322 in (12)
  • 1.380 in (2)
  • 1.62 in (3)
  • 1.63 in (2)
  • 1.83 in (2)
  • 1.875 (2)
  • 1.968 in;49.99 mm (5)
  • 10 (7)
  • 10.38 INCH (3)
  • 10-1/8 (10)
  • 11.63 INCH (5)
  • 1-1/16 in (2)
  • 1-1/8 in (4)
  • 12 (10)
  • 12.8 (2)
  • 13.38 INCH (2)
  • 14.12 (2)
  • 14-3/4 (2)
  • 15 (2)
  • 18 (2)
  • 2 in (3)
  • 2.12 in (4)
  • 2.44 in (2)
  • 2.5 in (10)
  • 2.59 in (2)
  • 2.638 in (3)
  • 2.74 in (2)
  • 2.75 in;69.85 mm (8)
  • 2.78 in;70.64 mm (3)
  • 2.791 in (4)
  • 2.8 in (5)
  • 20.6 in (2)
  • 2-23/32 in;69.1 mm (2)
  • 24.00 In (2)
  • 3.25 in (3)
  • 3.3 in (12)
  • 3.4 in (2)
  • 3.61 in (4)
  • 3.75 in (14)
  • 3.84 in (6)
  • 3-1/4 in;82.6 mm (2)
  • 3-3/4 in;95.3 mm (2)
  • 4.00 in (2)
  • 4.38 in (2)
  • 4-1/2 in;114.3 mm (2)
  • 48.00 in (2)
  • 5.88 INCH (4)
  • 5/8 in (3)
  • 6 (6)
  • 6.375 in;161.9 mm (3)
  • 7.13 INCH (5)
  • 7.88 INCH (4)
  • 8 (6)
  • 8.63 INCH (5)
  • 9 (10)
  • 9.63 INCH (5)
  • Show More...

• Wire Size

  

  • #10 to #6 AWG (5)
  • #12 to #10 (28)
  • #12 to #4 (4)
  • #14 - #10 (6)
  • #14 to #0 AWG (3)
  • #14 to #10 (5)
  • #14 to #10 AWG (4)
  • #14 to #12 (3)
  • #14 to #12 AWG (2)
  • #14 to #8 AWG (6)
  • #16 AWG to #8 AWG (7)
  • #16 to #12 AWG (3)
  • #16 to #8 AWG (5)
  • #16 to #8 AWG (Stranded Copper) (10)
  • #18 AWG to #10 AWG (3)
  • #18 to #10 AWG (18)
  • #18 to #12 AWG (10)
  • #18 to #6 AWG (4)
  • #18 to #8 AWG (15)
  • #18 to #8 AWG (Copper Conductor) (6)
  • #22 AWG (2)
  • #24-16 AWG (2)
  • #4 to #1 AWG (Building);#4 to #2 AWG (Extra Flex) (2)
  • #8 to #4 AWG (Stranded Copper) (3)
  • 0 to #14 AWG (3)
  • 0 to #18 AWG (4)
  • 0.390 to 1.375 in (Cable Range) (2)
  • 0.440 to 1.375 in (Cable Range) (2)
  • 0.875 to 1.906 in (Cable Range) (2)
  • 1 To 4/0 AWG (Building), 1 To 3/0 AWG (Extra Flex) (2)
  • 10 - 6 (5)
  • 10 , 12 , or 14 (3)
  • 10 To 8 AWG (Extra Flex) (2)
  • 10-6;10-8 (3)
  • 12 (3)
  • 12-6 (5)
  • 14 - 0 AWG (3)
  • 14 - 10 (96)
  • 14 - 12 (11)
  • 14-0 (3)
  • 14-10 (5)
  • 18 - 10 AWG (2)
  • 18-0 (6)
  • 18-10 (7)
  • 2/0 - 4/0 (7)
  • 2/0 To 4/0 AWG (7)
  • 4 (44)
  • 4 To 1 AWG (Building), 4 To 2 AWG (Extra Flex) (10)
  • 4 To 2 AWG (Extra Flex) (2)
  • 6 - 2 (2)
  • Max Cord: 8/3 S, 8/4 S, 10/5 S;Min Cords: 12/3 SJ, 16/3 S, 14/4 SJ, 18/4 S, 18/5 S (2)
  • Max. Cord: 10/3 S, 10/4 S, 10/5 S;Min. Cord: 16/3 SJ, 18/3 S, 18/4 SJ, 18/4 S, 18/5 S (4)
  • Show More...

• Package Quantity

  

  • 1 (2)
  • 1 CA;4 PK (2)
  • 1 CA;80 PK (2)
  • 1 ct (80)
  • 1 CT;10 PK (79)
  • 1 CT;100 PK (4)
  • 1 CT;12 PK (3)
  • 1 CT;15 PK (2)
  • 1 CT;2 Pk (2)
  • 1 CT;22 PK (3)
  • 1 CT;25 PK (16)
  • 1 CT;26 PK (6)
  • 1 CT;30 PK (11)
  • 1 CT;5 PK (10)
  • 1 CT;50 Pk (24)
  • 1 CT;6 Pk (3)
  • 1 PK (9)
  • 1.0 (2)
  • 10 (3)
  • 10 CT (9)
  • 10 CT;100 PK (31)
  • 10 CT;200 PK (19)
  • 10 CT;50 PK (11)
  • 10 PK (4)
  • 10 PK;50 PK (2)
  • 100 (3)
  • 100 PK (4)
  • 1000 PK;100 CT (4)
  • 12 CT (2)
  • 2 CT;10 PK (3)
  • 2 PK (4)
  • 2 PK;10 PK (2)
  • 2/10 PK (2)
  • 20 PK;1 CT (2)
  • 200 PK;50 CT (3)
  • 25 (2)
  • 25 CT (4)
  • 25 CT;1 PK (2)
  • 25 CT;100 PK (6)
  • 25 CT;50 PK (4)
  • 25 PK (9)
  • 25 PK;100 PK (2)
  • 250 PK (2)
  • 3 (4)
  • 3 PK (6)
  • 30 PK (2)
  • 5 (3)
  • 5 CT (10)
  • 5 CT;1 PK (4)
  • 5 CT;25 PK (5)
  • 5 PK (19)
  • 5 PK;25 PK (3)
  • 50 CT (4)
  • 50 CT;200 PK (5)
  • 50 PK;1 CT (2)
  • 500 PK;50 CT (2)
  • 6 CT (10)
  • Show More...

• Special Features

  

  • "Increased Safety" Type Box Terminals with Gripper Ribs Securely Clamp Around Conductors (3)
  • 15a GFCI (3)
  • 2pc Cord Grip Accepts Wide Cord (2)
  • A Precise Manufacturing Process Creates A Sharper Cutting Edge On Each Tooth For A Faster Cutting Blade;A Thicker, More Rigid Blade Body Resists Fracturing And Bending For Maximum Durability;A Unique Combination Of Relief Angles Forms A Radius On The Back Of The Tooth That Reduces Stress Build-Up During Cutting And Substantially Extends Blade Life;Matrix Ii Bi-Metal Teeth For Greater Durability;Package Quantity: 5;Shank: 1/2 IN Universal;The 1 IN Tall Blade Body Reduces Blade Twisting For Straighter, More (3)
  • ACCEPTOR plugs conform to NEMA configurations and can be used with standard receptacles in non-hazardous areas to maximize equipment utilization. The system's "turn to engage" feature locks in plug and can be used to prevent accidental disengagement of cr (3)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Explosionproof, dust-ignitionproof;Smooth, rounded integral bushing in each hub protects conductor insulation (8)
  • All Plugs Work With 24 AWG Solid Or Stranded Conductors And Round Or Flat Cables;Features: All Plugs Are Manufactured To Comply With FCC 86 Guidelines And are UL listed;IDEAL Modular Plugs Are Capable Of Supporting The Latest EIA/TIA Cable System Performance Categories When Installed In Compliance With Appropriate EIA/TIA Standards And Methods;Includes plugs for Round Cable With Solid Conductors And Plugs For Flat Cable And Stranded Conductors;Position: 8;The Position And Contact Configurations Cover The P (2)
  • Also permits adequate access to cover screws for easy attachment of cover to FS, FD or other device box;Covers open all the way, permitting easy plug insertion and withdrawal;Duplex units accommodate one receptacle and one toggle switch or any combination of the two;Large head cover screws are captivated;Single cover units accommodate NEMA configuration receptacles for locking or non-locking blade plugs, or toggle switches;Unique design of spring door hinge provides smooth action;Wet location (2)
  • Aluminum Cord Connector Provides Durable Performance (2)
  • Aluminum Cord Connector Provides Durable Performance;Knurled Finish Makes Them Easy to Handle and Maintain UL Listing by Hand Tighteningul Listing by Hand Tightening;Lightweight Design (10)
  • Angled, 4-Position (2)
  • Arc-Resistant Plastic;Dead Front Design & Double Wire Contact (14)
  • Audible alarm, auto-ground (2)
  • Auto Grip Straight Body;Wiring Type Back Wire (3)
  • Auto Grip Straight Body;Wiring Type Back Wire;Grounding (2)
  • Auto Ground Clip;Back & Side Wire;Zinc Steel Strap (7)
  • Auto-ground clip assures positive ground. Two drive screws anchor strap to back body and face where abrupt removal torque is greatest. Heavy-duty, corrosion-resistant zinc-plated steel strap for added strength. Backed-out tri-drive steel terminal screws. Internal screw-pressure-plate back and side wire capability. Two back wire holes for increased wiring flexibility. One-piece brass triple-wire power contacts for lasting retention. (4)
  • Back & Side Wire;Plated Steel Strap (3)
  • Back & Side Wire;Tri Drive Terminal & Mounting Screws (2)
  • Chemical & Impact resistant, 2pc cord grip accepts wide cord (5)
  • Child Safe;Side Wire;Self Grounding (2)
  • Clean Tapered Thread (8)
  • Color Green (2)
  • Color Red (2)
  • Color Yellow (2)
  • Combination devices deco (2)
  • Combination Switch (5)
  • Commercial Grade (43)
  • Commercial grade deco (10)
  • Comml grade plugs & conns (6)
  • Comml grd plugs & conns (3)
  • Compact and Lightweight (6)
  • Concrete-Tight (5)
  • Concrete-Tight;Raintight (6)
  • Constructional Feature Rain Tight, Oil Tight;Enclosure Rating Class I Div 2 (5)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (16)
  • Corrosion resistant turnlock locking device (7)
  • Corrosion Resistant;Multiweave Grip Gives Cable Arc-Of-Bend Control;Easy Cable/Flexible Conduit Installation (2)
  • Corrosion Resistant;One-Piece Design with Machined Threads;Tapered Interior Seats the Bushing Evenly for a Liquidtight Seal (2)
  • Corrosion-resistant, plated and tabbed steel strap locked in to face and back body to resist pulling away from face/body assembly. .032 inch thick, brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face. 8 hole internal screw-pressure-plate back wire terminals accept #14 – #10 AWG solid or stranded copper or copper-clad conductors. Terminal compartments isolated from each other for posi (3)
  • Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly. .032 inch thick, brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face and thermoplastic back body. Accepts #14 - #10 AWG solid or stranded copper or copper-clad wire. Terminal compartments isolated from each other for positive conductor containment. Tri-drive termina (4)
  • Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly. One-piece brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face and thermoplastic back body. Internal screw-pressure-plate back wire capable of accepting #14 - #10 AWG solid or stranded copper or copper-clad wire. Terminal compartments isolated from each other for pos (4)
  • Corrosion-resistant, plated steel strap locked into assembly to prohibit strap from bending away from body. One-piece, brass, triple-wipe power contacts for lasting retention. Heavy-duty compact design for easier installation and long lasting performance. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face. Terminal compartments isolated from each other for positive conductor containment. Side and internal screw-pressure-plate back wire ac (2)
  • Cover is Held Secure By Sliding it Under the Top End Flangeand Fastening it With Plated Screws on the Bottom Endflange;Sealing Screws and Lances are Located at Each End of Thewireway Cover wireway Exceeding 72 inches in Length has Two Covers, Aremovable Center Channel and Body Supports (2)
  • CR (3)
  • Crimping Die Behind Hinge For Superior Leverage Crimping Non-Insulated Connectors, Lugs and Terminals. (2)
  • Cuts Acsr, Screws, Nails and Most Hardened Wire. (2)
  • Cuts through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8 In cut to go through wood studs. Extra-tough bi-metal blade made of highest grade tool steel. Steam oxide finish for cooler running saw. Extra-thick backplate minimizes vibration. (3)
  • Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance. They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain. They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets. Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2: Class II, Div. 1 & 2: and C (5)
  • Designed for both interior and exterior, universal aluminum mounting plates (2)
  • Designed for commercial markets with strength and durability in mind, this combination USB charger duplex receptacle features 3.1A overall USB charging capability and is compatible with USB 2.0 & 3.0 devices. (3)
  • Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations and similar apparatus;Grounding style: Shell and extra pole;Ideal for use on shipping docks, ports and other ship to shore applications;Locking screw and slot prevents plug cable collar from backing off;Natural finish glass filled polyester insulating blocks;Plug and receptacle combination is NEMA 4X rated when clamping ring is fully tightened on receptacle; (4)
  • Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations and similar apparatus;Grounding style: Shell only;Ideal for use on shipping docks, ports and other ship to shore applications;Locking screw and slot prevents plug cable collar from backing off;Natural finish glass filled polyester insulating blocks;Plug and receptacle combination is NEMA 4X rated when clamping ring is fully tightened on receptacle;Rough usag (6)
  • Dielectric Strength 2000 V (3)
  • Double Dovetail Design Provides Superior Protection Against Cord Pull-Out Forces;New-Design External Cord Grips Provide Visible Assurance Of Safe and Proper Cord Retention (2)
  • Double Dovetail Design Provides Superior Protection Against Cord Pull-Out Forces;New-Design External Cord Grips Provide Visible Assurance Of Safe and Proper Cord Retention;3 Phase (2)
  • Double Relief Angle Reduces Tooth Stress For Long Life;Matrix Ii Bi-Metal Teeth For Greater Durability;Package Quantity: 5;Precision Forming Process Creates Sharper Teeth For Fast Cutting;Shank: 1/2 IN Universal (4)
  • Drop-forged, high-carbon steel construction withstands toughest applications; Knife-to-anvil blades never need resharpening; Induction-hardened blades cut hardened wire, bolts and ACSR; High-leverage design provides 40 PCT more cutting power; Smart-Grip handles are resistant to perspiration, water, oil and chemicals and provide a sure grip even when wet; Lifetime guarantee (2)
  • Dual mechanical shutter system to help prevent insertion of foreign objects. Auto-ground clip assures positive ground. Easily accessed break-off line-contact connecting tab for fast and easy split-circuit wiring. Backed-out tri-drive brass terminal screws for faster installation. Internal screw-pressure-plate back and side wire capability. Two back wire holes for additional wiring flexibility. Corrosion-resistant plated steel strap is locked in to face and back body to resist pulling away from the face/bod (2)
  • Duplex recessed receptacle with plate (3)
  • EdgeConnect™ Technology, Screwless Termination (7)
  • Edison Base (2)
  • Enclosure Type Class I Div 2;Constructional Feature Liquid Tight, Rain Tight, Oil Tight, Concrete Tight (2)
  • Enhanced visible blade (9)
  • Excellent Conductivity;Double Dovetail Design (10)
  • Excellent Conductivity;Double Dovetail Design;Raised Ribs Provide Non-Slip Gripping Profile For Turning to Lock and Unlock (9)
  • Explosionproof;Dust Ignitionproof (5)
  • Explosionproof;Dust-Ignitionproof;Smooth;Rounded Integral Bushing (5)
  • External Cord Clamp Provides Maximum Strain Relief;Box Terminal With Hex Socket Threaded Slug, Permits High Clamping Pressure On Conductors Without Damaging Strands (3)
  • Features: 12 Gauge Wire (4)
  • Features: All-Aluminum Electro-Tin Plated design eliminates possible bi-metallic corrosion and provides shortest connector length design possible for easy installation in equipment with limited space. Solid electro-tin plated aluminum plug makes properly connection easily. Smooth surface on the solic EC plug provides greater area contact establishing excellent conductivity. Solid plug has equivalent cross-sectional area as current carrying equivalent copper wire permitting use of larger aluminum wire to co (2)
  • Features: Tempered Body for Long Life, Slow Spiral, Suitable for Rotary or Percussion, For Brick, Concrete, Tile, Slate and Cinder Block (4)
  • Finger Safe (3)
  • Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws (2)
  • Furnished with 2-way Phillips/Slotted Head Screw (4)
  • Furnished with Tri-Drive screw (3)
  • HCF (2)
  • Heavy duty, packaging type blister pack (4)
  • Heavy-duty (7)
  • Heavy-Duty, Watertight, Grounding Style 2, NEMA 4 Enclosure (2)
  • Hospital Grade (12)
  • Hospital grade plugs & conns (3)
  • If No Gfci Protection Is Present;The Receptacle Will Render Itself Inoperable and a Red Indicator Light Will Glow Notifying The User There Is No Power and The Device Must Be Replaced. (3)
  • IG symbol and Isolated Ground markings for easy identification and circuit delineation. Triple-wipe brass contacts ensure lasting, positive contact with plug blades. High-impact resistant nylon face resists impacts and scrapes. Corrosion-resistant plated steel strap. Patented feature, external screw-pressure-plate back wire clamp on ground terminal for faster, easier installation. Plastic barrier isolates grounding terminal from mounting strap and metal boxes. Side and internal screw-pressure-plate back wi (3)
  • Includes Sealing Washer;Bonds Conduit to Box or Enclosure;Corrosion Resistant Protection from Moisture & Oils;Designed to Protect Against Excessive Vibration (3)
  • Individual Wiring Terminals Completely Enclosed;Fast Lead Assembly Screws;Beveled Housing Prevents Snagging (3)
  • Industrial grade (7)
  • Industrial grade plugs & conns (5)
  • Industrial Grade Straight Blade Devices;1.37 in Tip to Tip Width;1.50 in Base (2)
  • Industrial Grade Straight Blade Devices;1.46 in Receptacle Width (2)
  • Industrial grd plugs & conns (21)
  • Industry's only interchangeable replacement blades. Strong durable back plate. Use with power drill to cut large diameter holes for recessed lighting fixtures. (2)
  • Internal Shutter System;Side Wire;Low Profile Face (5)
  • Isolated Ground (3)
  • Knockout Bushing (6)
  • Liquidtight fittings are used with metallic and non-metallic conduit to seal out water, oil, and dust in applications food processors, beverage & chemical plants, plastics fabricators, machine shops, etc. (7)
  • Locking Device, impact resistant (6)
  • Low Arc Voltage, Excellent DC Performance, Superior Cycling Capability (4)
  • Metal baffle for large diameter BR40, PAR38, BR30 and PAR30 lamps (4)
  • Multiple Seal Plug/Connector Interface Keeps Out Contaminants;Floating Blade Construction Provides Self-Alignment, And A Better Mechanical And Electrical Connection Minimizing Wear And Heat Generation;Transparent Wiring Guide to Verify All Wire Strands Are In Place Before Securing Wire (2)
  • Multiple Seal Plug/Connector Interface Keeps Out Contaminants;Resists Vapor And Water From High-Pressure Wash Down Up to 1000psi;Floating Blade Construction Provides Self-Alignment, And A Better Mechanical And Electrical Connection Minimizing Wear And Heat Generation (2)
  • NEMA 3R Enclosure (8)
  • Non-indicating or Solid state SmartSpot visual blown fuse indicator Time-delay for motor starting and transformer inrush currents without nuisance opening 600VAC & 600VDC dual rated 300kA interrupting rating - self-certified, UL witnessed tests Extremely current-limiting for low peak let-thru current Recommended for Arc Flash energy reduction Easy 2-to-1 selectivity for prevention of nuisance shut downs and “black outs” Rejection-style design prevents replacement errors (when used with recommended fuse blo (6)
  • Non-Insulated (2)
  • Nylon Cord Connector Resists Most Common Industrial Corrosives;Provides Effective Pullout Protection;Lightweight Design (3)
  • One-piece nickel-plated brass mounting strap with integral ground. Strap tabs wrap around and lock down on face to prevent strap from separating from face and back body. Two drive screws anchor strap to back body and face. Exclusive patented feature, circuit label on face allows permanent circuit identification. .040 inch thick, nickel-plated brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant (2)
  • Plastic snap in wire clamp with aluminum conductors (5)
  • Power Failure Memory (3)
  • Power Rating 1 Hp (4)
  • Power Rating 1 Hp;Side Wire (4)
  • Proprietary Steel and Heat Treat Process For Maximum Strength and Durability;Strong Magentic Tip For Secure Grip;Color-Coded Band For Easy Size Identification;Chamfered Edge For Fastening In Tight Spaces;Package Quantity:1 (5)
  • Provide Exceptional Durability and Performance;Floating Blade Construction Provides Self-Alignment and a Better Mechanical and Electrical Connection Minimizing Wear and Heat Generation (2)
  • Provide strain relief to protect the cord or cable;UL listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub;Watertight/oiltight (3)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (2)
  • Pulling Eye (2)
  • Push-On Installation;No Tools (9)
  • Quick Clamping-Requires No Adjustment After Initial Setting (2)
  • Quickloop Wire Aid;Side Access Push Wire Release (5)
  • Rated watertight for 1,500 psi high-pressure hosedown, P&S Turnlok® watertight plugs & connectors feature rugged construction, multiple seals to ensure protection against the environment and ease of installation. (8)
  • Ready to wire, nylon housing, rugged 2pc cord grip (3)
  • Ready to wire, rugged 2pc cord grip & internal dust shield (3)
  • Ready to Wire;Rugged 2pc Cord Grip & Internal Dust Shield (3)
  • Renewable (9)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, and Common Solvents;Lower Installed Cost;Molded of Type Nylon 6. Flammability Classification 94v-2:Temperature Index 125°C (6)
  • Reverse Service (4)
  • Rotating Cap for Optimum and Precise Control (2)
  • Rubber Housing;Nickel Plated Blades & Contacts (2)
  • Safety Grip Straight Body;Wiring Type Back Wire (2)
  • Safety Grip Straight Body;Wiring Type Side Wire (2)
  • Screw Holding (4)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (3)
  • Secure Grip;Cord Grip Design Protects Terminations From Excess Strain;Clear, Funnel Shaped Wire Entry For Ease Of Termination (3)
  • Secure Grip;Individually Molded Face For Each Blade Configuration;Roomy Wiring Chamber Provides Ample Space For Wiring (2)
  • Self Grounding (7)
  • Self hinge, enclosed terminals and molded finger grips (3)
  • Severe Duty Straight Body;Wiring Type Back Wire (2)
  • Side wire, Duplex, tri-driver terminal &Mountingscrews (7)
  • Side Wire;Duplex;Tri-Driver Terminal & Mounting Screws (10)
  • Side Wire;Easily Accessed Break Off Line Contact (2)
  • Side Wire;Low Profile Face (3)
  • Side Wire;Self Grounding;Quickloop Wire Looping Aid (6)
  • Slide dimmers (2)
  • Small Footprint (5)
  • Smooth Body Design (2)
  • Solid-state LED monitor has 25-year minimum life expectancy. A high visibility, wide-angle lens indicates protection is in place. LED Indication: steady green = protected, flashing red = not protected, OFF = no power to unit. Audible alarm alert of MOV damage. Alarm able to be turned On/Off. Wrap-around steel strap for structural integrity. Auto-ground is standard, for easier installation. Impact-resistant nylon exterior resists impacts and scrapes. Triple-wipe, copper-alloy contacts for superior, more dep (3)
  • Spec grade plugs & conns (7)
  • Specification Grade and Wiring Type Back and Side Wire (3)
  • Specification Grade, Tamper Resistant, Wiring Type Back and Side Wire (2)
  • Stainless steel (2)
  • Stainless Steel Mesh is Corrosion Resistant;Multiweave Grip Gives Cable Arc-of-Bend Control;Endless Weave Provides Easy Cable/Flexible Conduit Installation (2)
  • Standard (6)
  • Standard grade (11)
  • Standard grade deco (6)
  • Standard Product (41)
  • Straight sides of metal baffle for large diameter lamps (2)
  • Superior Cord Grip Design Protects Terminations From Excess Strain;Clear, Funnel Shaped Wire Entry For Ease Of Termination (5)
  • Surface mount & power receptacles (3)
  • Tamper Resistant (6)
  • Tamper Resistant Wiring Type Back & Side Wire (2)
  • Tamper-resistant (3)
  • Terminals Have Pressure Plates to Protect Wires (2)
  • Tether Hole for Hanging (2)
  • Thermoplastic elastomer housing for outstanding impact and chemical resistance, as well as an exceptional seal for maintaining NEMA Type 3R and 4 integrity. Non-conductive retaining screw helps to insure no contact with live parts, along with providing stability to the fully assembled product. Heavy-duty brass male and female contacts provide a superior and consistent means of conductivity. Heavy-duty hex set screws allow greater termination torque. Copper wire provides quality strain relief. Copper shim b (7)
  • Thermoplastic, std and midi (5)
  • Thermoset, std size (7)
  • Threaded hubs (NPT). (4)
  • Time-Delay (6)
  • Time-delay Current-limiting AC & DC rated Optional solid state SmartSpot blown fuse indicator Time-delay for motor start-ups and transformer inrush currents without nuisance opening Current-limiting for low peak let-thru current Rejection-style design prevents replacement errors (when used with recommended fuse blocks) Easy-to-read label for quick brand recognition and replacement Metal-embossed date and catalog number for traceability and lasting identification Fiberglass body provides dimensional stabili (7)
  • Triple-Ground Edges (2)
  • Turnlock, locking device, quick thread assembly, rounded back contour, impact & corrosion resistant, new design external cord grips (3)
  • Ultra Grip;3 Phase;Back Wire Terminal Clamps For Easy Secure Wiring (6)
  • Ultra Grip;Back Wire Terminal Clamps For Easy Secure Wiring (4)
  • Ultrasonically welded polycarbonate connector housing secures terminations and conductors in a UL Listed, finger safe housing. Large brass contacts snugly terminate on device blade terminals. Pre-stripped connector leads fasten to conductors, easier than standard pigtails. Exclusive patented feature, circuit label on back allows permanent circuit identification. (2)
  • Vari-Size Adjustable Cord Clamp;Fast Lead Assembly Screws;Beveled Housing Prevents Snagging (3)
  • VersaMate® metallic pin & sleeve plugs, receptacles, and in-line connectors are designed for heavy duty industrial use. These devices supply power to both fixed and portable electrical equipment including pumps, generators, welders, vacuums, blowers and similar apparatus. Suitable for indoor and outodoor use, as well as applications that include wet, cold, hosedown, hazardous and corrosive environments. Configurations are also available in reverse-service and polarized orientations. (12)
  • Vibration Proof;Posi-Lok Insulated Throat;Grounding Screw (8)
  • Wallbox receptacles (2)
  • Watertight (12)
  • Water-Tight (3)
  • Watertight locking (6)
  • Watertight P&S plugs (4)
  • Watertight, Grounding Style 1, NEMA 4 Enclosure (2)
  • Watertight, Grounding Style 1, NEMA 4 Enclosure, Reverse Interior (8)
  • Watertight, Grounding Style 1, NEMA 4X Enclosure (3)
  • Watertight, Grounding Style 2, NEMA 4X Enclosure (7)
  • Weather and Tamper Resistant, AUTOGUARD Self test Technology, Closed Loop Active Detection (3)
  • Wire mesh grips for Turnlok® and EHU straight blade plugs and connectors provide additional strain-relief for wiring device plugs and connectors used on portable equipment in commercial and institutional applications, and industrial plant and construction site areas, which incur abnormally high abuse. (2)
  • Wiring Type Back and Side Wire (17)
  • Wiring Type Side Wire (11)
  • Show More...

• Application

  

  • 8-16 AWG Solid and 10-18 AWG Stranded Wire (2)
  • ACSR, Screws, Nails, Most Hardened Wire (6)
  • All Purpose (2)
  • Appliances (5)
  • Bi-Metal Hole Saw with 1-5/8 In cutting depth allowing cutting on 2x4 studs. Extra-thick backplate minimuzes vibration for smoother, easier cutting. (3)
  • C&I, Water, Communications, Electric Utility (3)
  • Cable Installation (3)
  • Combination Starters;Motor Control Centers;Machinery Disconnects;Power Panelboards (14)
  • Commercial (99)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (97)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility - Other (3)
  • Commercial / Institutional Buildings / Structures - Power Distribution and Controls (12)
  • Commercial Grade (2)
  • Commercial Hospital Grade (5)
  • Commercial Specification Grade (7)
  • Commercial/Industrial (7)
  • Commercial;Heavy Duty (2)
  • Commercial;Indoor (12)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (2)
  • Commercial;Industrial;Wet Location (7)
  • Commercial;Non-Hazardous Location (2)
  • Converts metallic box rough edged knockout holes to smooth insulated holes for protection of electrical and telecommunications cable. Rated 105 Degrees C. (6)
  • Driving Slotted Fasteners (4)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (8)
  • Electrical (7)
  • Electronics (2)
  • Extra Hard Use (19)
  • Extra Heavy Duty Industrial (21)
  • Fastening;Impact Driving (2)
  • For 1940 Flexible Metal Conduit Cutter (2)
  • For Brick, Concrete, Tile, Slate And Cinder Block (4)
  • For General Purpose (2)
  • For General Use (4)
  • For Securing And Sealing Cords And Cables Entering Enclosures Or Raceways (3)
  • For Sir Nickless Rotary Armored Cable Cutter (2)
  • For Stripping Solid Or Stranded Wire (2)
  • For use with Carflex conduit and Carflex X-Flex conduit (2)
  • For use with Liquidtight Metal conduit and PolyTuff I Non-Metallic conduit (2)
  • For Use With Threaded Rigid Metal Conduit and IMC (8)
  • General Industrial, Construction, MRO, Consumer Goods (2)
  • General Purpose (5)
  • Generation - Renewable Energy - Alternative EnergyOtherGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - Other (3)
  • Grounding and Bonding (4)
  • Grounding Wire (2)
  • Hammering (2)
  • Hazardous Location (11)
  • Heavy Duty (7)
  • High Ampacity Connections (5)
  • High-pressure washdowns. Particle build-up. Condensation. Corrosive substances. Food and beverage processing plants can be harsh, challenging environments. Fortunately, we have a full menu of electrical devices that keep things running smoothly while protecting people and equipment. IEC PIN & SLEEVE DEVICES Watertight Plugs & Connectors ¦ Thermoplastic elastomer body resists water, oils, lubricants and soaps while maintaining NEMA 4, 4X, 6, 6P, and IP65, 66, 67 ratings ¦ Ideal for washdown areas — rated wa (8)
  • Hospital (2)
  • Hospital grade (2)
  • Houses Runs of Control and Power Cable;Cable and Wire Junction, Distribution and Termination (2)
  • Hubbell-Pro Heavy Duty (3)
  • Hubbell-Pro Heavy Duty Hospital Grade (6)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors & Controls;Printing Equipment;Pumps;Refrigeration Equipment;Assemblies;Wire Hook-Up;Indoor/Outdoor (6)
  • Ind Facilities & Factories - Facility - Other (32)
  • Ind Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (5)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (48)
  • Ind Facilities & Factories - Facility: Safety and Security Systems (18)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (38)
  • Indoor or Outdoor;Wet;Cold;Hosedown;Hazardous or Corrosive Areas;Pulp & Paper Mills;Electrical Power Plants;Petrochemical Plants;Wastewater Treatment;Marine;Docks;Ports;Construction Sites;Breweries;Reneries;Chemical Plants;Grain Facilities;Textile Manufacturing;Food Processing Facilities (3)
  • Indoor;Outdoor (2)
  • Industrial (127)
  • Industrial Spec Grade (9)
  • Industrial/Commercial (25)
  • Industrial/Commercial Grade (5)
  • lighting (6)
  • Linear Measurment (3)
  • Medium Duty (4)
  • Metal (4)
  • Metal Cutting (15)
  • Mod Plug Terminating of UTP 24 AWG Cat 5 or 5E (3)
  • Motor circuits Mains Feeders Branch circuits Transformers Service entrance equipment General-purpose equipment (7)
  • Motors Safety switches Transformers Branch circuit protection Disconnects Control panels All general-purpose circuits (6)
  • Multi-Material (6)
  • Non-Indicating (3)
  • Nonmetallic Straight Connectors For Use With Nonmetallic "Type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut. Connectors Simply Screw Onto Cable. No Tools Required (2)
  • OtherGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - OtherGeneration - Renewable Energy - Alternative Energy (2)
  • Outdoor (9)
  • Petroleum refineries, chemical plants, wet/damp areas, corrosive environments, petroleum plants, grain elevators/feed mills, flour and feed mills, and indoor or outdoor locations (4)
  • Pharmaceutical;Chemical;Food Processing;Pulp/Paper and Nuclear Industries (8)
  • Poly Plug w/ Pulling Eye (2)
  • Power Distribution (35)
  • Replacement Blades (2)
  • Residential (6)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - Other (41)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - OtherResidential Bldgs & Facilities - Residential Bldgs/Facilities - Aftermarket (2)
  • Residential Home;Apartment Buildings;Extended Stay Hotels;Assisted Living Facilities;Retirement Communities (3)
  • Residential Outlet (2)
  • Residential/Commercial (18)
  • Residential;Commercial (52)
  • Service Entrance Switches;Switchboard Main and Feeder Switches;Transformers;Motor Control Center Mains and Motor Branch Circuits;individual Fused Combination Motor Controllers;Distribution Panelboards;industrial Control Panels;Protection of Fully-Rated Panelboards and Loadcenters;All General Purpose Circuits (6)
  • Specific Grade (3)
  • Stationary Mach Equip In Factory - Other Stationary Machinery and Equipment - In Factory (6)
  • steel plug used to cap unused knockout holes in box or enclosure. (6)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (7)
  • Straight Male- Form 1 (3)
  • Straight Male- Form 2 (5)
  • Straight Male- Form 3 (6)
  • Straight Male- Form 4 (6)
  • Straight Male- Form 5 (3)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • STRGHT BLADE PLG&CONNEC (50)
  • Suitable for indoor or outdoor use. Applications include the wet, cold, hosedown, hazardous or corrosive areas in such industrial applications as:Pulp & Paper Mills, Electrical Power Plants, Petrochemical Plants, Wastewater Treatment, Marine, Docks, Ports, Construction Sites, Breweries, Re?neries, Chemical Plants, Grain Facilities , Textile Manufacturing, Food Processing Facilities (12)
  • SURGE SUPPRESSOR (3)
  • Timers (2)
  • To close up a taped hole or hub. (4)
  • To ground and secure EMT Raceways to boxes and enclosures (8)
  • To positively bond conduit to box or enclosure (2)
  • Use In Brick, Concrete, Tile, Slate, & Cinder Block (3)
  • Use with metallic and non-metallic conduit to seal out water, oil, and dust in applications for food processors, beverage and chemical plants, plastics fabricators, machine shops, etc. Liquidtight connectors are also suitable for use in hazardous location (7)
  • Used for Closing Threaded Conduit Hubs (8)
  • Used to close a knockout in a weatherproof box (2)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (21)
  • Utility Knife (2)
  • Vehicles: On-Road (10)
  • Ventilation (2)
  • Wet Location (10)
  • Wet Location;Hazardous (18)
  • Wire Termination (3)
  • Wiring Enclosure;Pendant Station;Hand Tool;Construction;Processing and Material Handling Equipment;Pump;Motor and Machine Tool;Hazardous/Wet Location (4)
  • Wood Cutting (2)
  • Work Near Energized Sources (3)
  • Show More...

• Weight

  

  • 0.01 lb (2)
  • 0.02 lb/EA (2)
  • 0.03 lb/EA (2)
  • 0.04 lb/EA (2)
  • 0.044 lb (2)
  • 0.05 lb/EA (7)
  • 0.07 lb/EA (2)
  • 0.076 lb/EA (2)
  • 0.08 lb (2)
  • 0.09 lb (2)
  • 0.1 lb (2)
  • 0.1 lb/EA (11)
  • 0.10 lb (0.05 kg) (2)
  • 0.1000 lb (2)
  • 0.11 lb (2)
  • 0.11 lb/EA (3)
  • 0.1300 lb (13)
  • 0.1400 lb (10)
  • 0.15 lb (12)
  • 0.15 lb/EA (3)
  • 0.1500 lb (2)
  • 0.16 lb (3)
  • 0.1600 lb (5)
  • 0.17 lb (4)
  • 0.1700 lb (3)
  • 0.18 lb (4)
  • 0.1800 lb (2)
  • 0.1900 lb (6)
  • 0.2 lb (6)
  • 0.2 lb/EA (2)
  • 0.2000 lb (25)
  • 0.21 lb (2)
  • 0.21 lb/EA (3)
  • 0.2100 lb (4)
  • 0.2400 lb (2)
  • 0.25 lb (8)
  • 0.25 lb;0.11 kg (4)
  • 0.2500 lb (2)
  • 0.26 lb (3)
  • 0.29 lb (3)
  • 0.29 lb/EA (2)
  • 0.3 lb (4)
  • 0.30 lb;0.14 kg (3)
  • 0.32 lb (4)
  • 0.33 lb (4)
  • 0.34 lb (7)
  • 0.34 lb/EA (2)
  • 0.35 lb (8)
  • 0.36 lb (3)
  • 0.37 lb (3)
  • 0.3700 lb (4)
  • 0.38 lb (5)
  • 0.39 lb (3)
  • 0.4 lb (4)
  • 0.4000 lb (2)
  • 0.41 lb (6)
  • 0.4100 lb (2)
  • 0.44 lb (2)
  • 0.45 lb (3)
  • 0.5 lb (4)
  • 0.55 lb (3)
  • 0.71 lb (4)
  • 0.77 lb (2)
  • 0.81 lb (2)
  • 1 lb (2)
  • 1.0 lb (0.5 kg) (2)
  • 1.03 lb (3)
  • 1.1 lb;0.5 kg (7)
  • 1.18 lb (2)
  • 1.25 lb (3)
  • 1.5 lb/EA (2)
  • 1.5 oz;43 g (2)
  • 1.6 lb (0.7 kg) (2)
  • 1.6 oz (45 g) (2)
  • 15 lb (2)
  • 2.0 lb (2)
  • 2.4 oz;68 g (2)
  • 2.5 oz;71 g (2)
  • 24 g (2)
  • 3.0 lb (2)
  • 37.5 lb/100 (2)
  • 4.0 oz (113 g) (2)
  • 4.1 oz (116 g) (2)
  • 4.5 lb (2.0 kg) (2)
  • 4.8 oz (136 g) (3)
  • 5 lb (4)
  • 5.4 oz (154 g) (2)
  • 6.0 lb (4)
  • 7 lb (2)
  • 7.0 oz (187 g) (2)
  • 79 g (4)
  • 8 oz (227 g) (2)
  • 8.95 lb (2)
  • 9 lb (5)
  • 9.6 oz;272 g (3)
  • 90 g (4)
  • Show More...

• Manufacturer Status

  

  • Inactive (105)
  • Non-Stock (43)
  • Show More...

• Wall Plate Included

  

  • 0 IN (4)
  • NO (139)
  • YES (5)
  • Show More...

• Amperage

  

  • 15.0 (96)
  • 20.0 (97)
  • 30.0 (31)
  • 400.0 (7)
  • 50.0 (19)
  • 60.0 (2)
  • Show More...

• Poles

  

  • 1 (21)
  • 2 (222)
  • 2 Pole/ 3 Wire (6)
  • 2-Pole (74)
  • 3 (33)
  • 3 Pole (2)
  • 3-Pole (23)
  • 3-way (36)
  • 4 (29)
  • 4-Way (3)
  • Single-pole (9)
  • Three-pole (2)
  • Two-pole (16)
  • Show More...

• Operating Temperature

  

  • 32 to 104 °F (0 to 40 °C) (6)
  • -40°-60°C (76)
  • -40°-75°C (8)
  • Show More...

• Category Description

  

  • ALL PLASTIBOND FITTINGS (7)
  • All Recessed Cans & Trims (6)
  • ANCHORS & ANCHOR KITS (5)
  • BITS, BLADES, AND HOLE SAWS (273)
  • Breaker Enclosures with or without Breaker (2)
  • CEILING FANS AND ACCESSORIES (10)
  • Commercial cord connectors (5)
  • Commercial receptacles (168)
  • Commercial switches (14)
  • Commerical plates (2)
  • Comp & Mech Lugs and Butt Splices (2)
  • CORD CONNECTORS & CORD GRIPS (58)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (8)
  • Datacom Wiring Devices and Accessories (16)
  • DISCONNECTS (9)
  • EXOTHERMIC GROUNDING PRODUCTS (4)
  • FANS & HEATERS (3)
  • FASTENERS (4)
  • Fault Sensing Breakers (AFCI/GFCI) (9)
  • FLEX & MC FITTINGS (20)
  • FLOOR BOXES (4)
  • FORM 5 CONDULETS, COVERS, & GASKETS (10)
  • FS BOXES AND COVERS (4)
  • Fuses & Fuse Accessories (131)
  • GENERAL PURPOSE RELAYS (12)
  • HAND TOOLS (180)
  • HVACR Grills (14)
  • IDEC RELAYS.IDC (14)
  • Industrial cord connectors (187)
  • Industrial receptacles (54)
  • Job Site & Safety Apparel (4)
  • LAMPS (3)
  • LED CHANDELIERS, DECORATIVE, TABLE & FLOOR LIGHTING (2)
  • LED DECORATIVE C, CA, F, G SHAPE LAMPS (3)
  • Led Lighting (3)
  • LED SPECIALTY LAMPS & MODULES (29)
  • LOADCENTER ACCESSORIES (5)
  • Loadcenter Plug In Breakers and Accessories (3)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (64)
  • METALLIC FITTINGS (53)
  • Miscellaneous residential devices (9)
  • NEMA RATED TURNLOK PLUGS, CONNECTORS, & RECEPTICLES (61)
  • NON-METALLIC FITTINGS (30)
  • Pin & Sleeve Devices (79)
  • PLASTIC BOXES (2)
  • PLUG FUSES (18)
  • POWER TOOLS (11)
  • Residential cord connectors (25)
  • Residential dimmers, motion sensors, controls, & photo cells (10)
  • Residential GFCI devices (15)
  • Residential plates (15)
  • Residential receptacles (109)
  • Residential Switches (30)
  • SAFETY PRODUCTS (2)
  • SENSORS (17)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (2)
  • Specialty Breakers (Quad, Dupl, Shunt Trip) (3)
  • SPLICE KITS (7)
  • Stainless Steel EMT Conduit (2)
  • STEEL EMT FITTINGS (11)
  • STEEL WIRE WAY JUNCTION BOXES (41)
  • SURGE SUPRESSION PRODUCTS (2)
  • TERMINAL BLOCKS POWER DIST BLOCKS (4)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (4)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (9)
  • WEATHERPROOF BOXES & COVERS (15)
  • WIRE DUCT AND COVERS (5)
  • WIRE LUBE, MARKERS, & TIES (2)
  • Show More...

• Voltage

  

  • 12.00 IN (3)
  • 120.0 V (2)
  • 120.0 V, 125.0 V (7)
  • 120.00 (9)
  • 120.00 V (2)
  • 120/277 (2)
  • 125.0 V (141)
  • 125.0 V, 120.0 V (10)
  • 125/208 V (2)
  • 125/250 V (15)
  • 250.0 V (40)
  • 277.0 V (5)
  • 480.0 V (10)
  • 600.0 V (11)
  • Show More...

• Mounting

  

  • Between Enclosure and Conduit (2)
  • Bolt (2)
  • BOX (9)
  • CEILING (2)
  • Clip (13)
  • Connector (8)
  • Consult the Factory for Mounting Recommendations (7)
  • Cord (59)
  • Device, Wall (3)
  • FLUSH (4)
  • Locknut or Tapped Opening (43)
  • Plug (17)
  • Plug-in octal (2)
  • Plug-on (2)
  • Recessed (6)
  • Screw Mount (40)
  • Screws (2)
  • STUD (4)
  • Threaded (9)
  • WALL (119)
  • Show More...

• Style

  

  • (blank) (6)
  • Liftoff Cover no Knockouts (18)
  • Liftoff Cover with Knockouts (9)
  • Traditional (7)
  • Transitional (38)
  • Show More...

• Number Of Conductors

  

  • 1 (2)
  • 3 (7)
  • 3-Wire Grounding (3)
  • Single (43)
  • Show More...

• Connection Type

  

  • Back and Side Wired (19)
  • Back Wire (5)
  • Blade End x Blade End (14)
  • Grounding (12)
  • Internal Pressure Plates (2)
  • Liquid-Tight (6)
  • Non Ground (4)
  • Plug-In (14)
  • Screw (29)
  • Screw-On (2)
  • Set Screw (2)
  • Side Wire (22)
  • Squeeze (14)
  • Straight (18)
  • Straight Male (18)
  • Straight Male NPT (4)
  • Threaded (52)
  • Threaded x Push In (3)
  • Threaded x Screw-In (6)
  • Wire Ground (19)
  • Show More...

• Shape

  

  • Rectangular (22)
  • Round (6)
  • Straight (10)
  • Show More...

• Fuse Type

  

  • Blade (6)
  • Dual Element (14)
  • Show More...

• Blade Material

  

  • 440A Stainless Steel (4)
  • AUS 8 Stainless Steel (4)
  • Bi-Metal (20)
  • Carbide (6)
  • Chrome Vanadium Steel (2)
  • D2 Steel (3)
  • Forged Steel (2)
  • High Carbon Steel (2)
  • METAL (2)
  • Micro Carbide Metal (2)
  • Stainless Steel (17)
  • Steel (55)
  • Show More...

• Knockouts

  

  • 0 (3)
  • FALSE (25)
  • true (9)
  • Yes (2)
  • Show More...

• Number Of Phases

  

  • 1.0 (6)
  • 3.0 (13)
  • Show More...

• Enclosure Type

  

  • Class I Div 1 and 2 Group A B (6)
  • Class I Div 1 and 2 Group B (3)
  • NEMA 2/3/3R/4/4X/12 (8)
  • NEMA 4/4X/12/13 (18)
  • Show More...

• Type

  

  • 4" deep straight section (2)
  • 6" 6100 and 6200 Trim (6)
  • 6" deep straight section (2)
  • Accessory (8)
  • AFCI circuit breakers (3)
  • Aluminum Pin Adapters (2)
  • Anchor (4)
  • Auto grip (8)
  • Auto grip hospital grade (2)
  • BACK BOX (2)
  • Below Ground Boxes (3)
  • Bi-Metal Hole Saw (3)
  • Blade (2)
  • Blade fuse (11)
  • Blades (5)
  • BUSHING (6)
  • Cable Cutters (2)
  • carbide rotary (3)
  • Ceiling Fans (8)
  • CLASS RK1 (6)
  • CLASS RK5 (47)
  • Close Up Plugs (2)
  • Closed Case, Double Sided, Magnetic Hook (2)
  • Color Coded Locking (19)
  • COMMERCIAL (23)
  • Commercial grade combination switch (2)
  • Commercial Lay-in Galvanized Flat-Cover Type 1 Wireway;Straight Section (7)
  • Commercial Lay-in Hinged-Cover Type 1 Wireway;Straight Section (27)
  • Commercial specification grade (59)
  • COMPACT (2)
  • Conduit plug (33)
  • CONNECTOR (70)
  • Connector Body (8)
  • Connector cable (8)
  • Connector, Straight Blade (3)
  • Connectors-Straight (22)
  • CONSTANT PITCH (3)
  • Contractor Pack Motor, Blade, and Grill (2)
  • Cord grip (5)
  • DECORATOR (3)
  • Decorator Switch (3)
  • Demolition (5)
  • Diagonal Cutting Pliers (2)
  • Dimmer switch (2)
  • DUPLEX (3)
  • Duplex, GFCI, Straight Blade (6)
  • Electrician's (2)
  • EMT Conduit Straight Compression Connector (8)
  • Extra heavy-duty angled plug (5)
  • Extra heavy-duty hospital grade (6)
  • Extra heavy-duty industrial specification grade (7)
  • Fixture Accents/Parts (3)
  • Flex (3)
  • Flip Blade Screwdriver (2)
  • Flush Service (2)
  • Functional Lighting (3)
  • FUSE (29)
  • Fusible safety switch (9)
  • General-purpose relay (9)
  • GFCI circuit breakers (6)
  • Ground Hub (8)
  • Ground Rod Clamps Standard Duty (2)
  • GROUNDING (3)
  • Grounding Connectors-Straight (2)
  • Grounding Style 1 Clamping Ring Plug (2)
  • Grounding Style 1 Metallic Clamping Ring Plug (4)
  • Grounding Style 2 Metallic Clamping Ring Plug (3)
  • Hack Saw (3)
  • Heavy-duty hospital grade (10)
  • Heavy-duty industrial specification grade (24)
  • Heavy-duty universal NEMA power plug (4)
  • High speed fuse (4)
  • High Tension (2)
  • High-Leverage Diagonal-Cutting Pliers (4)
  • INDUSTRIAL (3)
  • Isolated Ground (3)
  • Knife (2)
  • Knockout Plugs (6)
  • LED Tapes (27)
  • Liquidtight connector (2)
  • Liquidtight Fittings (5)
  • LOCKING (3)
  • Locking Receptacle (6)
  • Locking, Plug (8)
  • Male Plug (2)
  • Masonry Drill (4)
  • Metallic Liquidtight Fittings (2)
  • Modular fuse block (3)
  • Monitoring relay (3)
  • Multi-Tool Blade (9)
  • Multi-Tool Blades (2)
  • Outlet (105)
  • Pin & Sleeve (12)
  • Pin & Sleeve Plug (2)
  • Pin and Sleeve plug (5)
  • PLUG (109)
  • Plug Fuse (15)
  • Plug on module surge protection device (2)
  • Plug Tail (3)
  • Plugs (33)
  • Pocket Knife (5)
  • POLARIZED (2)
  • Poly Plug w/ Pulling Eye (2)
  • Polycarbonate wallplate screws (2)
  • Power Outlet Angle Plug (7)
  • Pro grip California standard (5)
  • Pump Pliers (2)
  • Push-In Connector (10)
  • Ratcheting Cable Cutter (2)
  • RECEPTACLE (14)
  • Recessed Head Close-Up Plug (7)
  • Recessed Light Hole Saws (2)
  • Recessed Plug (4)
  • Reducing Bushing (2)
  • Replacement (3)
  • Replacement Blade (5)
  • Residential (27)
  • Residential Grade (17)
  • Round Body High-Speed Fuse-Links AC Protection (2)
  • Round Solid, RJ-45 (3)
  • Safety grip (2)
  • SCREWDRIVER (2)
  • Screwdriver Set (4)
  • Set screw type connector (3)
  • Severe duty (2)
  • Side Cutting Pliers (7)
  • SINGLE RECEPTACLE (3)
  • Spec Grade Surge Protective Receptacle, Audible Alarm with LED Indicator (3)
  • Square Head Close-Up Plug (6)
  • ST Series Straight Liquidtight Connector With Plain Throat (7)
  • STANDARD (2)
  • Standard Duplex (13)
  • Standard locking (5)
  • STRAIGHT (12)
  • Straight Blade (8)
  • Straight Blade Connector (5)
  • Straight Blade Plug (7)
  • Straight Blade Receptacle (15)
  • Straight Ceiling Wire (4)
  • Straight Liquidtight Non-Insulated Connector (7)
  • STRAIGHT MALE (33)
  • Straight Male Thread (10)
  • Sub feed main breaker (2)
  • Support Grip (2)
  • SurgeBloc protection receptacle (2)
  • Tamper-Resistant (4)
  • Tamper-Resistant, Weather Resistant (5)
  • Terminal Block (2)
  • Thermal magnetic circuit breakers (4)
  • Type SR Gold Seal Strain Relief Straight Connector (3)
  • Ultra grip (33)
  • Watertight (8)
  • Watertight locking plug (2)
  • Watertight Plug (5)
  • Weatherproof (5)
  • Wire Stripper (2)
  • Wiring trough (4)
  • Work Glove (2)
  • Show More...

• Height

  

  • 0.453 in (5)
  • 0.7 (2)
  • 10 (4)
  • 12 (8)
  • 2 (2)
  • 3.28 (2)
  • 3.28 in (23)
  • 3.281 (20)
  • 3.281 in (12)
  • 3.31 in (20)
  • 3.68 (8)
  • 3.75 (3)
  • 3.75 in (10)
  • 3.812 in (3)
  • 3.813 (4)
  • 4 (11)
  • 4.00 in (12)
  • 4.19 in (7)
  • 4.193 in (3)
  • 4.478 in (2)
  • 5.65 in (5)
  • 6 (17)
  • 7.5 (3)
  • 8 (6)
  • 8.5 (2)
  • 9 (2)
  • Show More...

• Wattage

  

  • 1 (3)
  • 12 (3)
  • 12500 (4)
  • 150 W (2)
  • 1875 (6)
  • 2000 (2)
  • 2500 (33)
  • 3 (3)
  • 4 (3)
  • 47 (2)
  • 5 (5)
  • 5000 (2)
  • 7 (4)
  • 7500 (2)
  • 9 (2)
  • Electrical power is expressed in Amps and Volts. (39)
  • Show More...

• Number Of Gangs

  

  • 1 (8)
  • 1.0 (3)
  • 2 (10)
  • Show More...

• Connector Type

  

  • Compression (7)
  • RJ45 (3)
  • SET SCREW (2)
  • Squeeze (14)
  • STRAIGHT (12)
  • STRAIGHT MALE (2)
  • Straight Nonmetallic (9)
  • Straight, Insulated (3)
  • Show More...

• Frequency Rating

  

  • 50/60 Hz (6)
  • 60 Hz (7)
  • Show More...

• Trade Size

  

  • 1 (9)
  • 1 in (11)
  • 1 INCH (3)
  • 1/2 (2)
  • 1/2 in (21)
  • 1/2 INCH (3)
  • 1-1/2 (3)
  • 1-1/2 in (9)
  • 1-1/4 (4)
  • 1-1/4 in (8)
  • 2 (5)
  • 2 in (10)
  • 2-1/2 (2)
  • 2-1/2 IN (2)
  • 3 (4)
  • 3 in (6)
  • 3/4 (3)
  • 3/4 in (25)
  • 3/4 INCH (3)
  • 3/8 (2)
  • 3/8 in (2)
  • 4 (3)
  • Show More...

• Shank Type

  

  • 1/4" Hex (3)
  • Round (16)
  • Slotted (4)
  • Square (4)
  • STRAIGHT (4)
  • Show More...

• Color Code

  

  • — (2)
  • ANSI 61 (28)
  • Black/ Yellow (4)
  • BLUE (5)
  • BROWN (6)
  • GRAY (2)
  • ORANGE (4)
  • Orchid (5)
  • RED (4)
  • WHITE (4)
  • YELLOW (4)
  • Yellow/Black (2)
  • Show More...

• Size

  

  • 0.430 In Width X 0.15 In Depth X 0.606 In Height (3)
  • 0.760 In Width X 0.207 In Depth X 0.752 In Height (7)
  • 0.88 In Diameter X 2.44 In Length (3)
  • 0.88 In Diameter X 3.25 In Length (3)
  • 1 (14)
  • 1 1/2 (3)
  • 1 1/4 (3)
  • 1 1/4" NPT (3)
  • 1 in (7)
  • 1 INCH (5)
  • 1 X 3/4 (2)
  • 1" NPT (4)
  • 1.06 In Diameter X 5.88 In Length (2)
  • 1.11 In Diameter X 7.88 In Length (4)
  • 1.32 in x 0.83 in x 3.28 in (9)
  • 1.32 in x 1.14 in x 3.28 in (3)
  • 1.5 in (2)
  • 1.50 In Diameter X 7.18 In Length (8)
  • 1.52 in x 1.52 in x 1.96 in (2)
  • 1.53 in x 1.53 in x 1.97 in (3)
  • 1.56 In Diameter X 7.13 In Length (2)
  • 1.61 In Diameter X 9.63 In Length (4)
  • 1.83 in (4)
  • 1.88 in x 1.88 in x 2.45 in (2)
  • 1.97 in x 1.53 in x 1.53 in (2)
  • 1/2 (18)
  • 1/2 in (6)
  • 1/2 INCH (4)
  • 1/2" NPT (8)
  • 1/4 (2)
  • 10.87 in x 4.25 in x 4.25 in (3)
  • 11.63 x 2.56;295.402 x 65.1 (3)
  • 1-1/2 (5)
  • 1-1/2 in (4)
  • 1-1/2 INCH (3)
  • 1-1/4 (6)
  • 1-1/4 in (5)
  • 1-1/4 INCH (2)
  • 1-3/4 (2)
  • 1-3/8 (4)
  • 2 (11)
  • 2 in (7)
  • 2 INCH (3)
  • 2.26 in x 2.26 in x 2.75 in (7)
  • 2.33 in x 2.33 in x 2.75 in (7)
  • 2.51 in x 2.51 in x 3.96 in (4)
  • 2.64" (3)
  • 2.77 in x 2.77 in x 3.94 in (2)
  • 2.78 in x 1.53 in x 1.53 in (2)
  • 2.8 in (19)
  • 2-1/2 (3)
  • 2-1/2 Inch (2)
  • 2-5/16 In Diameter X 6-1/2 In Length (4)
  • 3 (7)
  • 3 in (4)
  • 3 INCH (2)
  • 3" (3)
  • 3.25" (3)
  • 3.28 in x 1.33 in x 1.05 in (3)
  • 3.28 in x 1.57 in x 1.07 in (2)
  • 3.28 in x 1.57 in x 1.15 in (6)
  • 3.28 in x 2.75 in x 2.44 in (2)
  • 3.3 in (45)
  • 3.3" (3)
  • 3.4 in (5)
  • 3.75" (4)
  • 3.8 in (25)
  • 3.8" (7)
  • 3/4 (14)
  • 3/4 in (5)
  • 3/4 INCH (4)
  • 3/4" NPT (5)
  • 3/8 (6)
  • 3/8 INCH (2)
  • 4 INCH (2)
  • 4" (2)
  • 4.12 in x 1.75 in x 1.48 in (4)
  • 4.2 in (20)
  • 4.25" (3)
  • 4.5 in (3)
  • 4.75" (3)
  • 4-1/8 In Diameter X 10-4/5 In Length (3)
  • 5" (2)
  • 5.7 in (5)
  • 6 In (2)
  • 6.37 in x 2.56 in x 2.56 in (4)
  • 6.625 in x 2.375 in x 1.875 in (3)
  • 6.68 in x 3 in x 3 in (4)
  • 6.8 (3)
  • 6.875 (4)
  • 7.5 (3)
  • 8.5 IN Length 8.0 IN Width 2.813 IN Height (2)
  • 8.81 in x 3.68 in x 3.68 in (3)
  • F2 (12)
  • F3 (7)
  • F4 (2)
  • Standard (2)
  • Standard Sized (10)
  • Standard Sized Product (7)
  • Show More...

• Handle Material

  

  • Aluminum (4)
  • Anodized Aluminum (6)
  • CA/TPE (2)
  • Cushion Grip (5)
  • Fiberglass (3)
  • Glass-filled Nylon (3)
  • Plastic (11)
  • Rubber (15)
  • Rubber, High-Dielectric Plastic (3)
  • Steel (4)
  • TPE (2)
  • Show More...

• Ac Voltage Rating

  

  • 250 (6)
  • 500 (2)
  • 600 (7)
  • Show More...

• Accuracy

  

  • +/- 1/16 in (6)
  • +/- 1/16 in. (4)
  • Show More...

• Insulation Type

  

  • Non-Insulated (7)
  • Rubber (2)
  • Show More...

• Contact Configuration

  

  • 2NC (4)
  • 3PDT (2)
  • DPDT (11)
  • DPDT latching (2)
  • SPDT (2)
  • Show More...

• Thread Size

  

  • 0.63 in (2)
  • 1 in (2)
  • 1 in NPT (3)
  • 1/2 in (10)
  • 1/2 in NPT (3)
  • 1-1/2 in NPT (3)
  • 1-1/4 in NPT (3)
  • 2 in NPT (3)
  • 2-1/2 in NPT (2)
  • 3 in NPT (3)
  • 3/4 in (10)
  • 3/4 in NPT (4)
  • Show More...

• Handle Type

  

  • CUSHION GRIP (7)
  • Cushioned Rubber Grip (2)
  • Dipped, Comfort-Grip, Vinyl Coated (2)
  • Ergonomic (3)
  • Ergonomic, Cushion-Grip, Vinyl Coated (2)
  • Plastic Dipped (3)
  • Rotary (2)
  • Slim (6)
  • Straight (9)
  • Show More...

• Minimum Qty

  

  • 100 (3)
  • 25 (3)
  • 5 (5)
  • 50 (4)
  • Show More...

• Temperature Rating

  

  • 105?°C (6)
  • -40° - 60° C (2)
  • Operating Temperature: -20°C to +55°C (-4°F to 131°F), Storage Temperature: -40°C to +85°C (-40°F to 185°F) (3)
  • Show More...

• Construction

  

  • Clear Glass (3)
  • Injection molded plastic (2)
  • N/A (6)
  • Support and Strain Relief Grips, Various Types of Pulling (2)
  • Various Types of Pulling, Support and Strain Relief Grips (5)
  • Show More...

• Thickness

  

  • 0.82 in;20.8 mm (2)
  • 025 (3)
  • 1 in (8)
  • 1.3" (4)
  • 35 (3)
  • 42 (3)
  • 5 (2)
  • Show More...

• Knockout Size

  

  • 1 in (4)
  • 1/2 in (5)
  • 1-1/2 in (2)
  • 1-1/4 in (3)
  • 2 in (3)
  • 3/4 in (4)
  • Show More...

• Contact Rating

  

  • 10A (2)
  • 15 A (6)
  • 5 A (2)
  • Show More...

• Blade Length

  

  • 1" (2.5 cm) (2)
  • 1/2 in;12.7 mm (Knief Length) (2)
  • 12 (3)
  • 12 in (3)
  • 12 INCH (2)
  • 12.0 (3)
  • 2.0 (2)
  • 2.05 (2)
  • 2.2 (2)
  • 2.25" (5.7 cm) (2)
  • 2.4" (6.1 cm) (2)
  • 2.5 in;63.5 mm (2)
  • 2.67 (2)
  • 2-1/2 in;63.5 mm (3)
  • 25/32 in;19.8 mm (Knief Length) (6)
  • 25/32 in;20 mm (Knief Length) (2)
  • 3 (3)
  • 3" (7.6 cm) (2)
  • 3.5" (8.9 cm) (2)
  • 30.5625 (3)
  • 35.375 (3)
  • 35.375 in (4)
  • 44.875 (8)
  • 6 (4)
  • 6 in (10)
  • 6 in;152.4 mm (2)
  • 6.0 (6)
  • 8 in;203 mm (2)
  • 8.0 (2)
  • 9 (3)
  • 9 in (6)
  • 9 in;228.6 mm (2)
  • 9.0 (6)
  • Show More...

• Overall Length

  

  • 10-15/16 in;277.8 mm (2)
  • 12" (30.5 cm) (3)
  • 14 mm (2)
  • 1-7/8 in (4)
  • 29.3 mm (4)
  • 2-9/16 in (4)
  • 3 in (3)
  • 3.5 in (2)
  • 35 mm (4)
  • 35.375 in (4)
  • 4 (2)
  • 4" (10.2 cm) (2)
  • 5 in (2)
  • 5.5" (14 cm) (2)
  • 5.88 in (2)
  • 6 (3)
  • 6 in (11)
  • 6.75" (17.1 cm) (2)
  • 6.9 (2)
  • 6.9" (17.5 cm) (2)
  • 6-1/8 in;155.6 mm (3)
  • 6-3/4 in;171.5 mm (2)
  • 7.13 in (2)
  • 7.88 in (4)
  • 7-7/8 in;200 mm (3)
  • 8 (4)
  • 8 in;203 mm (2)
  • 8.344" (21.2 cm) (2)
  • 8-11/32 in;211.9 mm (3)
  • 8-5/8 in;219.1 mm (3)
  • 9 in (9)
  • 9.5" (24.1 cm) (2)
  • 9.63 in (4)
  • 9-1/2 in;241 mm (2)
  • 9-1/2 in;241.3 mm (4)
  • 9-3/8 in;238.1 mm (2)
  • Show More...

• Used On

  

  • Liquid Tight Conduit (2)
  • Liquidtight Conduit (5)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (2)
  • Show More...

• Switch Type

  

  • 120 VAC 15 AMPERE SINGLE POLE TOGGLE (3)
  • Trigger (3)
  • Show More...

• Wiring

  

  • BACK, SIDE (2)
  • SIDE (3)
  • Show More...

• Housing Material

  

  • Reinforced Nylon (3)
  • Steel (2)
  • Show More...

• Lamp Type

  

  • B11 (3)
  • LED (2)
  • Show More...

• Depth

  

  • 1.392 (4)
  • 16.5 (2)
  • 18 (2)
  • 22.5 (2)
  • 4.00 In (2)
  • 5 (2)
  • 6.00 In (2)
  • Show More...

• Standard Package

  

  • 20 (2)
  • 30 (2)
  • 4 (2)
  • 40 (3)
  • Show More...

• Trip Type

  

  • Common (2)
  • Common breaker trip (2)
  • Show More...