Hole Saw Kit, Carbide (Tip) Material, 12 Pieces, 1.6 LB

Accessories 35PD 1/4 6MM Pilot Bit 3PK

2-1/8" Double-Blade Design For Fast, Smooth Cuts. Dual Cutting Edges Can Be Re-Sharpened For Longer Bit Life. Large, Open Design Won'T Clog With Wood Chips. Self-Feed Tip Pulls Bit Through Wood. Outer Spur Teeth Reduce Splintering and Blowouts. Replaceable Tip.

Bushing, Drive SCR 1.125X1.87X1.06 (51046860)

Spade Bit 1/2" Hole Diameter. 6-1/4" Long With 1/4" Hex Shank. Bore Hardwood, Softwood, Plywood and Drywall. Forged and Heat Treated For Long Life. For Use In 1/4" (6.4 MM) or Larger Power Drills. Hole In Top Center Of Bit For Wire Pulling.

Recessed Light Hole Saw Steel Toothed 6-5/8" (168MM). Industry'S Only Interchangeable Replacement Blades. Strong Durable Back Plate. Available In Two Styles - Steel Tooth and Carbide Grit. Made and Designed In Usa By Greenlee. Use With A Power Drill to Cut Large Diameter Holes For Recessed Lighting Fixtures. Saws Use Greenlee Arbor 37156, Purchased Separately.

Shank Arbor With High-Speed Steel Pilot Drill Bit. 7/16" Shank, 1/2" Minimum Chuck Size. Use With 1-1/4" - 6" Hole Saws. The Best Arbor In The Industry Ensures A Solid Connection Without Any Gaps or Wobbling. Arbors Include Replaceable, High-Speed Steel Pilot Drill. Pilot Drills Have Unique Split-Point Tip Design. Use With Greenlee Bi-Metal Hole Saws, Recessed Light Holesaws and Carbide-Grit Hole Saws (Carbide-Tipped Pilot Drill Sold Separately). Can Be Used With Greenlee #901 or #904 Bit Extensions

Bandsaw Blade. 10 / 14 Teeth Per Inch.

Mobile Band Saw Blades. 1/2" X .020" X 44-7/8" Portable Saw Blade.Bi-Metal. 14/18 Teeth Per Inch. Perfect For Your Mobile or Portable Band Saw, These Top-Quality, Bi-Metal Blades Feature High-Speed Steel Teeth That Can Handle Even Tough Metals Like Stainless Steel With Ease. Bi-Metal Blades Feature High-Speed Tool Steel, Bonded to An Extra-Tough Alloy Back For Maximum Hardness and Heat Resistance. Fits Most Popular Models Of Portable Band Saws.

Pilot Drill, 1/4 In Bit Size, High Speed Steel, 4-1/8 In Overall Length, 0.2 LB

Fish Line 2150' (655 M) 85 Pound Strength. Strong, Lightweight Nylon. Center Feed For Fast Payout Without Tangling, Use With Mighty Mouser Blow Gun. Mildew-Resistant, Can Be Pulled Into The Run With The Wire to Provide A Means to Add Wires Later.

4" Conduit Piston For Use With Blower or Vacuum Power Fishing System to Pioneer The Line Through The Conduit Run. Flexible Foam Body For An Air-Tight Seal. Color-Coded End Disk With Embossed Size Markings For Fast, Easy Selection. Strong Steel Center Rod With Loops On Both Ends. Pistons Available For All Types and Sizes Of Conduit 1/2" Through 6". Standard Pack Of 3.

Nail Eater® Extreme 1-1/8" (28.6 MM) Hole Diameter. 18" (457.2 MM)Overall Length. Improved Cutting Edge Provides 30 Percent Longer Life Span. Patented New Design For Improved Cutting and Cleaner Holes. Self-Feeding Screw Point Draws Bit Through Wood. Unique Patented Design Cutting Angle - Smoother Starts, Reduced Cutting Loads. Made Of Super Tough, Heat-Treated Steel. Cuts Through Nails and Provides Longer Life. Shorty Bits - For Working In Tight Places, Yet Still Can Go Through Three Abutting 2 X

Combination Drill/Tap Bits. 10-24NC. Complete Hole Drilling, Tapping and Deburring/Countersinking In One Operation With Power Drill Saves Labor and Time. Back Tapered Beyond Tap to Prevent Thread Damage From Over-Drilling. Deburr/Countersink Also Provided On Bit Beyond Back Taper. Made From Hardened High-Speed Steel VS. Carbon Steel For Longer Life. High Quality Hex Shank to Ensure Strong Connection to Drill Chuck. Designed to Tap Up to 10-Gauge Metal. Quick Change Adaptor Included In Both Metric A

Combination Drill/Tap Bits. 10-32NF. Complete Hole Drilling, Tapping and Deburring/Countersinking In One Operation With Power Drill Saves Labor and Time. Back Tapered Beyond Tap to Prevent Thread Damage From Over-Drilling. Deburr/Countersink Also Provided On Bit Beyond Back Taper. Made From Hardened High-Speed Steel VS. Carbon Steel For Longer Life. High Quality Hex Shank to Ensure Strong Connection to Drill Chuck. Designed to Tap Up to 10-Gauge Metal. Quick Change Adaptor Included In Both Metric A

Job Site Organizer, 5 In Overall Height, 14 In Overall Length, 18 In Overall Width, 6.1 LB Weight