Hellermanntyton Surface Raceway Systems Are The Ideal Solution For Routing Communication and Power Cables. No Need to Break Into Existing Walls - Raceway Systems Are Designed to Route Cable Along Wall Surfaces. Made Of A PVC Material, Components Are Durable and Affordable; and The One-Piece Construction and Adhesive Tape Backing Make Positioning and Mounting Easy. Hellermanntyton Offers A Low Voltage TSR System and A Power Rated TSRP System That Are Available In Three Different Diameters to Accommodate Dif

.040" (1.0MM) Galvanized Steel. Packed Ten 10' (3M) Lengths Per Carton. Base Has 9/32" (7.1MM) Diameter Mounting Holes On Centers Of Approximately 8" (203MM).

For Holding The Conductors In Place. Not Ul Listed.

For Right Angle Turns On The Same Surface. Galvanized Steel

Will Accommodate Commercially Available 15A or 20A Duplex Receptacles. Base Has 1/2" and 3/4" Concentric Trade Size Kos. Nonmetallic Cover Has 1500 and 2600 Series Raceway Twistouts On All Four Sides. Two 1500WC Wire Clips Included. Side Wiring Recommended. Gray Finish. Note: Certified to Canadian Safety Standards. For Sale In Canada. When Ordering These Products, Add “C” Prefix to Part Number to Denote The Canadian Version, I.E “C1546B”.

Connects Equipment Grounding Conductor. Provides An Additional Ground For Raceway.

For Covering Joint Where Two Pieces Of 2300BAC Series Raceway Cover Come Together. Ivory

Divided Fitting to Feed 2300 and 2300 Divided Series Raceway. Includes 1/2", 3/4", and 1" Trade Size Kos On Back and Top. Ivory

2300 Series Flat Elbow. For Right Angle Turns On Same Surface. Finish - Ivory

2300 Series External Elbows. For Right Angle Turns Around External Corners. Finish - Ivory

Use With Any Nonmetallic Round Device Box to Convert Into A Junction Box. White

For Hanging Fixtures, Smoke/Fire Alarms and Other Security Devices With 3 1/2" (89MM) or 4 1/16" (103MM) Mounting Centers. Has 1/2" Trade Size Ko. Not For Use With Fans. Ivory

Two-Gang. Base Has Rectangular Ko to Enable Extension From Existing Single-Gang Flush Wall Box and 1/2" and 1" Trade Size Concentric Kos. Accepts Industry Standard Faceplates For Switch and Communication Devices. White

For Use With 2300D Series Divided Raceway When Additional Depth Is Required. For Mounting Standard Switches, Receptacles, and Industry Standard Faceplates For Communication Devices. Ivory

Divided Two-Gang Box For Use With 2300D Series Divided Raceway. Provides The Ability to Have Both Power and Low Voltage At A Single Point Of Use. Utilizes 5507 Series Faceplates, As Well As Wiremold Open System Communication Modules, Ortronics Tracjack and Series Ii Inserts, and Pass and Seymour Activate Series Inserts. Note: CM-Epla End Plates Are Required When Using Wiremold CM2 Communication Modules and Pass and Seymour Activate Series Inserts. S2-Epl End Plates Are Required When Using Ortronics Series

Joins The Lengths Of 2400B Base Together.

Tele Power Pole Blank Steel White 15FT.Dimensions: 177.00 X 2.30 X 2.25

Two Sections Of A Two-Compartment (Power and Communication) Pole (5'4" (1.626M) Base + 5' (1.524M) Extender) Assembles to Form A 10' 4" (3.148M) Pole. Nominal Material Thickness .040" (1.0MM). Ivory or Gray Boot Base. Factory Wired With Fed-Spec General Grade 20A 125V Duplex Style Receptacles. An 8" (203MM) Cover At Top Front (Power Side) Of Pole Is Removable For Making Power Wiring Connections. Kos Provided In Removable Cover For RJ11/RJ45 and Modular Furniture Communication Connectors. Mounting Hardware,

One-Piece Latching Duct. 5' (1.5M) Strip Extruded From Rigid Natural PVC. Adhesive Back. Smooth Texture Ivory.

Low-Profile, Two-Piece Raceway With Durable, Textured PVC Ivory or White Finishes. Available In 5' (1.52M) Lengths. Packed 100' (30.5M) Per Carton. Supplied With Wide Adhesive Tape Along Its Entire Length. White