Nacogdoches |
10 |
0 |
All Stores |
|
|
|
Vendor |
T&B Ind Fitting |
Legrand-Pass & Seymour |
Catalog Number |
5251 |
5251 |
Manufacturer Number |
5251 |
5251 |
Category |
Condubx, Non-Metallic CBL, S. -
Liquid Tight Fittings
|
Gen Purpose Wiring Devices -
Gen Purpose Recept & Surge Pro
|
Classification |
Metallic Fittings
|
Residential Switches
|
UNSPSC |
39121420 - Liquid tight connectors
|
39121406 - Electrical receptacles
|
UPC/EAN/GTIN |
00786210052519 |
00785007525106 |
Weight per package |
0.21 (lbs/each) |
0.1606 (lbs/each) |
Description |
5251 3/8" 90D LT Conn
Liquid Tight 90°Connector, 3/8 In Trade Size, Malleable Iron Material, Zinc Electroplated/Chromate Coating, 15/32 In Diameter, Non-Insulated, 3/8 In NPT Thread Size, Threaded Connection, 1 Outlet, 21 LB/100
|
5251 Recp SGL 15A 125V S-Wire BN
Heavy-Duty Spec Grade Single Receptacle Side, Wire 15AMP 125VOLT, Brown
|
|
Minimum Order QTY |
1 Unit |
1 Unit |
Unit/Foot |
$11.95 (Each) |
$8.97 (Each) |
Carton/Reel |
$298.64 (25 Each) |
$8.97 (1 Each) |
Standard Packaging/Reel |
$597.29 (50 Each) |
$897.00 (100 Each) |
|
amperage rating |
- |
15 |
connection |
- |
Back and side wire |
Material |
Malleable Iron |
Nylon;Other |
Number of Wires |
- |
3 |
Poles |
- |
2 |
Voltage Rating |
- |
125 |
Wattage |
- |
Electrical power is expressed in Amps and Volts. |
Wire Size |
- |
14 - 10 |
|
Finish |
Zinc Electroplated/Chromate Coating |
- |
|
Diameter |
15/32 in;29.4 mm |
- |
Height |
- |
3.68 |
Size |
3/8 INCH |
- |
Width |
- |
1.08 |
|
Description |
3/8" 90D LT CONN |
RECP SGL 15A 125V S-WIRE BN |
extra long description |
ABB 5251 3/8 NON-INSUL 90 DEG LT CO |
P&S 5251 RECP SGL 15A 125V S-WIRE B |
Features |
Liquidtight Conduit Fitting, 90 Degree 3/8 Inch, Non-Insulated Malleable Iron |
- |
Long Description |
Liquid Tight 90°Connector, 3/8 in Trade Size, Malleable Iron Material, Zinc Electroplated/Chromate Coating, 15/32 in Diameter, Non-Insulated, 3/8 in NPT Thread Size, Threaded Connection, 1 outlet, 21 lb/100 |
Heavy-Duty Spec Grade Single Receptacle Side, Wire 15amp 125volt, Brown |
Product Type |
Liquid Tight 90° Connector |
Recp SGL 15A 125V S-Wire BN |
Short Description |
Liquid Tight 90° Connector, Malleable Iron, 3/8 in, 90°, Insulated |
- |
Special Features |
Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage |
Auto-ground clip assures positive ground. Two drive screws anchor strap to back body and face where abrupt removal torque is greatest. Heavy-duty, corrosion-resistant zinc-plated steel strap for added strength. Backed-out tri-drive steel terminal screws. Internal screw-pressure-plate back and side wire capability. Two back wire holes for increased wiring flexibility. One-piece brass triple-wire power contacts for lasting retention. |
|
Connection Orientation |
90° |
- |
Connection Type |
Threaded |
- |
Dielectric Strength |
- |
Withstands 2000V minimum |
for use with |
Liquid Tight Flexible Metal Conduit |
- |
Insulated/Non-Insulated |
Non-Insulated |
- |
Number of Outlets |
1 |
- |
package quantity |
25 CT;50 PK |
- |
Standards Met |
UL E23018 Listed;CSA Certified |
- |
Thread Size |
3/8 in NPT |
- |
|
|
Brand |
Thomas & Betts |
Pass & Seymour/Legrand |
Manufacturers Part Number |
5251 |
5251 |
sub brand |
ABB |
- |
|
Category Description |
METALLIC FITTINGS |
Residential Switches |
Type |
Connectors-90 Degree |
Spec Grade Single Receptacle |
|
|
|
Application |
Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture |
Commercial |
environmental conditions |
- |
Flammability: UL94 V2 |
Mounting |
- |
WALL |
nema rating |
- |
5-15R |
standard |
UL E23018, CSA |
UL498, CSA C22.2 No. 42 |
|
|
Access Denied
To use this feature, you need to apply for a Customer Account with Elliott Electric Supply.
Access Denied
To use this feature, you need to apply for a Customer Account with Elliott Electric Supply.
Please Contact the account administrator for access to the Quote Feature
Please Contact the account administrator for access to the Custom List Feature
Please Contact the account administrator for access to the Inventory Feature
Please Contact the account administrator for access to the Custom Part Feature
Login is required for access to this feature
Feature is unavailable while in Quote Mode.
|
Access Denied
To use this feature, you need to apply for a Customer Account with Elliott Electric Supply.
Access Denied
To use this feature, you need to apply for a Customer Account with Elliott Electric Supply.
Please Contact the account administrator for access to the Quote Feature
Please Contact the account administrator for access to the Custom List Feature
Please Contact the account administrator for access to the Inventory Feature
Please Contact the account administrator for access to the Custom Part Feature
Login is required for access to this feature
Feature is unavailable while in Quote Mode.
|