Filter Your Results

• Keyword
• WP17 INTERMATIC INC

---

• Product Type

  

  • 1/2 GR Unilet (2)
  • 1/2 In. Conduit Bender (2)
  • 24-Hour Mechanical Time Switch With Skip-A-Day, 120 Vac, 60H (3)
  • 24-Hour Mechanical Time Switch With Skip-A-Day, 125 Vac, 60H (2)
  • 24-Hour Mechanical Time Switch, 208-277 Vac, 60HZ, DPST, Ind (3)
  • 3/16 In. 2 Cutter SDS Carbide Bit (2)
  • 3/4 In. Conduit Bender (2)
  • 30° Elbow (2)
  • 4 Wire Ground TB 1.5 MM2 (2)
  • 400A Circuit Breaker Enclosure Nema 3R (2)
  • 400A PNL, 1 200A Main Incl and 1 Prov (2)
  • 45° Elbow (4)
  • 8.5W 2-Pin Compact Led Lamp, Horizontal Orientation, 120-277 (4)
  • 8.5W 2-Pin Compact Led Lamp, Vertical Orientation, 120-277V (3)
  • 8W 2-Pin Compact Led Lamp, Horizontal Orientation, 120-277V (3)
  • 90° Elbow (34)
  • 9W Led 4-Pin Compact Lamp, Horizontal Orientation, Ballast C (4)
  • 9W Led 4-Pin Compact Lamp, Vertical Orientation, Ballast Com (5)
  • Advent Stepladder (5)
  • Anchor Kit (3)
  • Arbor and Drill (4)
  • Auger Drill Bit (2)
  • Baffle Trim (3)
  • Bath Ventilation Fan (2)
  • Box Mounting BRKT 16 Stud Spacing (2)
  • BR 100A/2 Pole Com. Trip 120/240V 42K (2)
  • BR 110A/2 Pole Com. Trip 120/240V 22K (2)
  • BR 110A/2 Pole Com. Trip 120/240V 42K (2)
  • Cable Tie (35)
  • Carbide Cutter Sheet Metal (2)
  • Cat5e Cable (2)
  • Channel Angle Fitting (2)
  • CHT Twin Breaker (2)
  • Clamp (3)
  • Clip, Conduit, (3)
  • Combination Coupling (3)
  • Conduit Body (81)
  • Conduit Coupling (12)
  • Conduit Hanger (5)
  • Conduit Hanger With Bolt (5)
  • Conduit Hub (2)
  • Conduit Nipple (7)
  • Conduit Outlet Body (33)
  • Conduit Outlet Box (13)
  • Conduit Outlet Box with Cover (26)
  • Conduit to BM FS, 1 1/2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 1" Emt, 3/4" Imc, Rigid, 1/8" to 1/4" Flan (2)
  • Conduit to BM FS, 1/2" Emt, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1/2", 3/4" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 3/4" Emt, 1/2" Imc, Rigid, 1/8" to 1/4" FL (2)
  • Conduit to BM FS, 3/8" Conduit, 1/8" to 1/4" Flange (2)
  • Cord Grip Connector (12)
  • Coupling (8)
  • Coupling Nut (3)
  • Definite Purpose Control - Contactor (22)
  • Device Box (4)
  • Dimmer (2)
  • Eaton 5S Ups (4)
  • Eaton Powerxl DC1 Adjustable Frequency Drive (11)
  • Ele Ballast (2) F28T5 120-277V (2)
  • Electrical Metal Conduit (10)
  • Emt Compression Connector (11)
  • End Ball (4)
  • Fender Washer (6)
  • Flat Boring Bit (2)
  • Flat Washer (3)
  • Flexible Conduit (3)
  • Flexible Connector (3)
  • Folding Hex Key Set (3)
  • General Purpose Relay (2)
  • Glass Lens (2)
  • Groove Joint Plier (5)
  • Ground Clamp (7)
  • Hex Bolt (9)
  • Hex Nut (2)
  • Hub Connector (9)
  • Intermediate Metal Conduit (9)
  • Junction Box (3)
  • Knockout Hub (2)
  • Liquid Tight 45° Connector (10)
  • Liquid Tight 45°Connector (10)
  • Liquid Tight 90° Connector (15)
  • Liquid Tight 90°Connector (15)
  • Liquid Tight Straight Connector (20)
  • Liquidtight Flexible Metallic Conduit (4)
  • Machine Screw (7)
  • Machine Screw Anchor (2)
  • Masonry Box (5)
  • Metal Blade (7)
  • Metal Indoor Time Clock (2)
  • Metallic Enclosure (18)
  • Meter Main With Load Center (2)
  • Meter Offset (2)
  • Meter Socket (4)
  • Miniature Circuit Breaker (3)
  • Mogul Conduit Body (4)
  • Multi-Bit Screwdriver and Nut Driver (3)
  • multi-Conductor Cable (2)
  • Myers Hub (2)
  • Non Metallic Liquid Tight 90° Connector (3)
  • Non Metallic Liquid Tight Straight Connector (2)
  • Non-Metallic 90° Connector (4)
  • Non-Metallic 90°Connector (4)
  • Non-Metallic Cable Connector (3)
  • Non-Metallic Liquid Tight 90°Connector (3)
  • Non-Metallic Liquid Tight Straight Connector (2)
  • Non-Metallic Straight Connector (6)
  • Nut Driver Set (3)
  • Nut Driver Sets (2)
  • Octagon Box (7)
  • Octagonal Box (2)
  • Outlet Box (15)
  • Photo Control (5)
  • Plaster Ring (2)
  • Post Base 1 5/8" X 1 5/8" CHNL, 8" X 3 1/8" X 3 1/2" Base, (2)
  • Power Terminal Block (2)
  • Push-in Wire Connector (7)
  • PVC Conduit (25)
  • Reducing Bushing (16)
  • Rigid Conduit (2)
  • Rigid Conduit Reducing Washer (6)
  • Ringless Meter Socket (2)
  • Round Head Machine Screw (6)
  • Safety Transformer (2)
  • Sawzall Blade (4)
  • Self Drill Screw (2)
  • Service Entrance Cap (4)
  • Ship Auger Bit (4)
  • Single Gang Threaded Unilet (2)
  • Sleeve Anchor (2)
  • Snap-In Bushing (6)
  • Snap-in Terminal Adapter (2)
  • Splicing Connector (2)
  • Split Lock Washer (2)
  • Spring Nut (3)
  • Spring Wound Countdown Timer, Decorator Style, 125-277 Vac, (6)
  • Square Box (6)
  • Square Outlet Box (3)
  • Standard Trip Circuit Breaker (61)
  • Steel Gang Box (2)
  • Steel Switch Box (16)
  • Step Ladder (6)
  • Step Plastic Baffle (3)
  • Strain Relief Connector (11)
  • Switch Box (6)
  • Tek Screw (6)
  • Threaded Unilet 1 (2)
  • Time Clock (2)
  • Timer (2)
  • Toggle Bolt (3)
  • Trim (3)
  • Twisted Pair Cable (2)
  • Union (12)
  • Ventilation Fan (4)
  • Watertight Hub (6)
  • Watertite Plug (2)
  • Weatherproof In-Use Cover (2)
  • Weatherproof Outlet Cover (7)
  • Show More...

• Brand

  

  • ABB (18)
  • Adalet-PLM (18)
  • Allied Moulded Products (9)
  • American Lighting (2)
  • Anaconda (2)
  • Anamet Electrical Inc (4)
  • Appleton (85)
  • ARLINGTON (11)
  • Arlington Industries (19)
  • Blackburn Grounding (2)
  • Bridgeport (29)
  • BROAN (5)
  • Cables & Cords (9)
  • CALBRITE (4)
  • Calpipe Industries, Inc (5)
  • CANTEX,INC (25)
  • Carlon (14)
  • Carlon(R) (4)
  • Catamount (13)
  • CHANNELLOCK (5)
  • Conduit (19)
  • Connecticut Electric (42)
  • Cooper Bussmann North America (2)
  • COOPER WIRING DEVICES (13)
  • Crouse-Hinds (2)
  • Eaton (375)
  • Eaton Corp (42)
  • EATON CROUSE-HINDS SERIES (60)
  • EATON CUTLER-HAMMER (63)
  • Eaton Wiring Devices (8)
  • EC-KORNS (3)
  • ECN-KORNS (9)
  • Electri-Flex (4)
  • ELITE LIGHTING (2)
  • Erico, Inc. Eritec-Caddy (3)
  • Federal Pacific(R) (7)
  • Flexible Conduit (2)
  • GE (22)
  • GE Current (3)
  • Generac (2)
  • GREENLEE (8)
  • Greenlee Textron (4)
  • HALO (7)
  • Halo Home (4)
  • Ideal (21)
  • IDEC CORPORATION (2)
  • INDUSTRIAL CONNECTIONS & (83)
  • Intermatic (5)
  • Intermatic Inc. (78)
  • JUNO (2)
  • Keystone (28)
  • Keystone Technologies (7)
  • KILLARK (25)
  • Klein Tools (22)
  • legrand (2)
  • LEGRAND-PASS & SEYMOUR (4)
  • LENOX TOOLS & ACCESSORIES (5)
  • LENOX[R] (4)
  • LH DOTTIE (20)
  • Louisville (6)
  • Lutron (52)
  • METALUX (2)
  • MILBANK (2)
  • Milwaukee Electric Tool (3)
  • Milwaukee® (87)
  • Mulberry (3)
  • Nsi Industries (5)
  • NuTone (2)
  • nVent CADDY (21)
  • O-Z/GEDNEY (4)
  • PANDUIT (16)
  • Panduit® (6)
  • Pass & Seymour (7)
  • Pass & Seymour/Legrand (3)
  • Pass and Seymour (3)
  • Peco Fasteners (2)
  • Peco Fasteners, Inc. (62)
  • PLASTIBOND (38)
  • Polaris (12)
  • Powergrp (6)
  • PVC & Accessories (76)
  • RAB Lighting Inc (14)
  • SELECTA (2)
  • Selecta Products (2)
  • SNAP 2 IT (2)
  • Southwire Rough Electrical Com (2)
  • Steel City (44)
  • STI (SPECIFIED TECHNOLOGIES INC) (3)
  • Superstrut (8)
  • T&B Ind Fitting (75)
  • T&B Liquidtight Systems (4)
  • Taymac (3)
  • Thomas & Betts (12)
  • Thomas&Betts-Abb Ins Prod (5)
  • TOPAZ ELECTRIC CORP (7)
  • TORK (3)
  • Ty-Rap (14)
  • Unistrut Corp. (2)
  • Viton(R) (32)
  • WAGO CORPORATION (2)
  • WIREMOLD (6)
  • Woodhead (4)
  • Zinsco(R) (6)
  • Show More...

• Material

  

  • 0.002 Inch Urethane Coated Interior/0.04 Inch PVC Coated Exterior Steel (3)
  • 0.0625 Inch Galvanized Steel (2)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (2)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (Body), Stainless Steel (Screw) (3)
  • 26 Gauge Rugged Galvanized Steel (2)
  • 304 Stainless Steel (2)
  • 316 Stainless Steel (3)
  • 40 MIL GRAY PVC EXTERIOR, 2 MIL RED URETHANE INTERIOR COATED ALUMINUM (12)
  • ABS/Polycarbonate (4)
  • Albalite (2)
  • Alloy Steel;Steel (3)
  • Aluminum (39)
  • Aluminum/Steel (2)
  • Bi-Metal (7)
  • Bi-Metal Steel (3)
  • Bi-Metal, High Speed Steel (4)
  • Carbide (2)
  • CARBIDE TIP (4)
  • CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention (5)
  • Cold Rolled High Carbon Steel (26)
  • Copper (Conductor) (2)
  • Copper Free Aluminum (18)
  • Copperfree (4/10 Of 1 PCT Maximum) Aluminum (6)
  • Copper-Free Aluminum (2)
  • Die Cast Zinc (2)
  • Die-Cast Aluminum (3)
  • Die-Cast Zinc (7)
  • DMC (41)
  • Electrogalvanized Steel (Body/Nut);Natural/Neoprene (Bushing) (12)
  • Electrogalvanized With Aluminum Acrylic Painted Feraloy Iron Alloy (4)
  • Feraloy Iron Alloy (Body And Cover);Neoprene (Gasket ) (4)
  • Feraloy(R) Iron Alloy (Body);Copper-free Aluminum (Cover) (4)
  • Fiberglass (6)
  • Flat Rolled Steel (9)
  • Galvanized Steel (3)
  • Glass-Filled Nylon, Aluminum (2)
  • Heat-Treated High-Carbon Steel (5)
  • Heavy Duty Die Cast Zinc (3)
  • Jacket: Thermoplastic PVC (2)
  • Low Carbon Steel (14)
  • Malleable Iron (88)
  • Metal (5)
  • METAL/PLASTIC (18)
  • MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER (3)
  • Nickel-plated Brass (Plug Blades and Connector Contacts);NEoTEX(R) Paracril OZO rubber (Outer Housing and Grommet);Stainless Steel (Face Screws);Nylon (Face Insert);Brass (Wire Saddle Clamp) (4)
  • Non-Metallic (5)
  • Nylon (4)
  • Nylon/Polyamide 6.6 (23)
  • Phenolic (2)
  • Plastic (21)
  • Plastic/Metal (21)
  • Plated Steel (2)
  • Polyamide/Nylon 6.6 (4)
  • Polycarbonate (7)
  • Polymer Concrete (2)
  • Polystyrene (2)
  • Pre-Galvanized Steel (6)
  • PVC (23)
  • Rugged 26 Gauge Galvanized Steel (3)
  • Silicon Bronze (Body) (2)
  • Silicon Bronze (Body);Zinc Plated Steel (Screw) (3)
  • Spring Steel (4)
  • Stainless Steel (7)
  • STAMPED STEEL (2)
  • Steel (211)
  • Thermoplastic (2)
  • UV Stabilized Plastic (5)
  • UV-Rated Plastic (16)
  • Weather-Resistant Nylon 6.6 (10)
  • Wood;Bi-Metal (Teeth) (2)
  • Zinc (18)
  • Zinc Die Cast (8)
  • Show More...

• Finish

  

  • 40 MIL GRAY PVC COATED EXTERIOR, 2 MIL RED URETHANE COATED INTERIOR (7)
  • Baffle White (2)
  • Ball burnish (2)
  • Ball Burnished;Mirror Smooth (5)
  • Black (3)
  • Bronze (3)
  • Caddy?® Armour (11)
  • Electro Galvanized (9)
  • Electro Zinc Plated (3)
  • Electro Zinc Plated/Chromate Coating (13)
  • Electro-galvanized (5)
  • ELECTROGALVANIZED (14)
  • Electrogalvanized and Aluminum Acrylic Paint (4)
  • Electrogalvanized and Aluminum Acrylic Paint (Body);Natural (Cover) (25)
  • Electrogalvanized with Aluminum Acrylic Paint (64)
  • Electrogalvanized With Aluminum Acrylic Painted (4)
  • Epoxy Powder Coated (14)
  • Epoxy Powder Painted (7)
  • Epoxy Powder Painted (Body);Natural (Gasket) (11)
  • Frosted (2)
  • Galvanized (4)
  • Gloss (21)
  • Hot Dip Galvanized (13)
  • Hot Dip Galvanized, 0.002 Inch Urethane Coated Interior, 0.04 Inch PVC Coated Exterior (2)
  • HOT DIPPED GALVANIZED (5)
  • Matte (6)
  • N/A (13)
  • Natural (6)
  • Nickel Plated (Plug Blades and Connector Contacts) (4)
  • nVent CADDY Armour (6)
  • Plastic Dipped (Handle) (2)
  • Plastisol Insulated (2)
  • POLISHED (2)
  • Powder Coated (3)
  • Powder Epoxy Paint (24)
  • Pre-Galvanized (34)
  • PVC (3)
  • PVC (Exterior Coating);Urethane (Interior Coating) (4)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • Pwt, Nckl, B/S, Slvr. (2)
  • RED URETHANE COATED INTERIOR, GRAY PVC COATED EXTERIOR (12)
  • SATIN (3)
  • SilverGalv (2)
  • STAINLESS STEEL TYPE 304 (2)
  • TPR Jacket (4)
  • white (4)
  • Zinc (3)
  • Zinc Coated (2)
  • Zinc Electroplated (22)
  • Zinc Electroplated/Chromate Coating (40)
  • Zinc Phosphate (33)
  • Zinc Plated (80)
  • Show More...

• Voltage Rating

  

  • >240 V (2)
  • 105 to 305 V ac (3)
  • 120 (50)
  • 120 - 277 (5)
  • 120 to 127 V ac;12 to 28 V dc (3)
  • 120 V (20)
  • 120 V ac (5)
  • 120 V ac @ 60 Hz (8)
  • 120/240 (28)
  • 120/240 V (51)
  • 120/240 V ac (60)
  • 120/240 VAC (2)
  • 120/240 Volt AC (2)
  • 120/277 (4)
  • 120-277 (2)
  • 120V (9)
  • 125 (12)
  • 125 - 277 (7)
  • 125V (2)
  • 208 - 277 (4)
  • 240 V (11)
  • 240 V - 240 V (12)
  • 240 V ac (11)
  • 240 W (4)
  • 250 (3)
  • 277/y480 V ac (2)
  • 277/Y480 VAC (3)
  • 277/Y480 VAC, 60/110 VDC (3)
  • 300 V (2)
  • 480 V (2)
  • 600 V (2)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (10)
  • ELBOW FITTING, 316 STAINLESS STEEL MATERIAL; 1/2 INCH SIZE A; 1/2 INCH SIZE B; .5 SIZE A - DECIMAL; .5 SIZE B - DECIMAL; 1/2 SIZE A - FRACTIONAL; 1/2 SIZE B - FRACTIONAL; NUCLEAR, PHARMACEUTICAL INDUSTRY CHEMICAL, PETROCHEMICAL APPLICATION; CAST PROCESS (2)
  • Show More...

• Style

  

  • (blank) (9)
  • CNP (2)
  • Contemporary Modern (2)
  • EFST (2)
  • Heavy-Duty (4)
  • Intermediate (5)
  • Miniature (2)
  • Not Applicable (2)
  • Standard (19)
  • Traditional (3)
  • UA (2)
  • Show More...

• Color

  

  • Almond (2)
  • Black (33)
  • Black (Cap) (4)
  • Black (Handle) (2)
  • Blue (13)
  • Blue (Cap) (4)
  • Brown (7)
  • Channellock Blue (Handle) (5)
  • Clear (11)
  • Colorless (26)
  • Eaton Crouse-Hinds (2)
  • GLV (9)
  • Gray (138)
  • Gray (Exterior Coating);Red (Interior Coating) (7)
  • Green (3)
  • Green (Cap) (2)
  • GREEN/YELLOW (2)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap (6)
  • Ivory (61)
  • Light Almond (5)
  • Light Almond (Wall Plate) (2)
  • Metallic (10)
  • Natural (8)
  • Off-White (3)
  • Orange (2)
  • Orange (Cap) (4)
  • Orange/Gray (2)
  • PRE-GALV (2)
  • Red (7)
  • Red (Cap) (2)
  • Silver (51)
  • Translucent (3)
  • Unpainted (9)
  • White (48)
  • Yellow (7)
  • Yellow (Cap) (3)
  • Yellow;Black (Handle) (4)
  • Show More...

• Trade Size

  

  • 1 (10)
  • 1 in (40)
  • 1 in;27 mm (2)
  • 1 INCH (10)
  • 1/2 (2)
  • 1/2 in (50)
  • 1/2 in;16 mm (2)
  • 1/2 INCH (5)
  • 1-1/2 (2)
  • 1-1/2 in (33)
  • 1-1/2 in;41 mm (2)
  • 1-1/2 INCH (2)
  • 1-1/4 (2)
  • 1-1/4 in (22)
  • 1-1/4 in;35 mm (2)
  • 1-1/4 INCH (2)
  • 2 (11)
  • 2 in (38)
  • 2 in;53 mm (2)
  • 2 INCH (2)
  • 2-1/2 IN (15)
  • 2-1/2 in;63 mm (2)
  • 2-1/2 INCH (2)
  • 3 (11)
  • 3 in (17)
  • 3 in;78 mm (2)
  • 3 INCH (4)
  • 3.5 in (2)
  • 3/4 (3)
  • 3/4 in (76)
  • 3/4 in;21 mm (2)
  • 3/4 INCH (8)
  • 3/8 in (5)
  • 3-1/2 in (3)
  • 4 in (23)
  • 4 in;103 mm (2)
  • 4 INCH (3)
  • 5 (2)
  • 5 in (2)
  • 5 INCH (2)
  • 6 in (3)
  • Show More...

• Current Rating

  

  • 0.3 A (2)
  • 10 A (3)
  • 100 A (5)
  • 125 A (3)
  • 15 A (9)
  • 15 A(Tungsten);8.3 A (Ballast) (3)
  • 20 A (15)
  • 200 A (5)
  • 25 A (3)
  • 30 A (24)
  • 35 A (2)
  • 40 A (16)
  • 45 A (2)
  • 50 A (9)
  • 6 A (2)
  • 60 A (7)
  • 70 A (2)
  • 80 A (2)
  • Show More...

• Body Type

  

  • Compact (4)
  • Conduit (33)
  • E (3)
  • Form 5 (25)
  • Form 7 (41)
  • Form 8 (3)
  • L (6)
  • LB (5)
  • LBD Mogul (4)
  • T (7)
  • X (5)
  • Show More...

• Capacity

  

  • 12.2 cu.in (3)
  • 12.5 cu.in (6)
  • 14 cu.in (2)
  • 15.5 cu.in (10)
  • 15.8 cu.in (2)
  • 18 cu.in (4)
  • 21 cu.in (4)
  • 21.5 cu.in (2)
  • 22 cu.in (7)
  • 29.5 cu.in (2)
  • 30.3 cu.in (11)
  • 4.35 cu.in (3)
  • 4.35 cu.in;0.1 dm^3 (3)
  • 42 cu.in (8)
  • 58 cu.in (2)
  • 6.7 Cu Inch (2)
  • 69.7 cu.in (3)
  • 7.3 cu.in (3)
  • 7.30 cu.in;0.1 dm^3 (4)
  • Show More...

• Blade Length

  

  • 6 in (6)
  • 9 in (4)
  • Show More...

• Number Of Pieces

  

  • 1 (2)
  • 10 (2)
  • 370 (2)
  • 5 (2)
  • 6 (3)
  • 7 (3)
  • Show More...

• Number Of Gangs

  

  • 1 (39)
  • 1.0 (10)
  • 2 (4)
  • 3 (3)
  • 4 (3)
  • Show More...

• Overall Length

  

  • 0.571 in;14.5 mm (2)
  • 0.780 in (5)
  • 10 in (2)
  • 1000 ft (6)
  • 12 in (2)
  • 16 (2)
  • 16.000 IN (406.400 MM) (2)
  • 1-7/8 to 3 in;47.6 to 76.2 mm (2)
  • 18 (2)
  • 18 INCH (6)
  • 2 in (2)
  • 2.32 in;59 mm (4)
  • 2.48 in (3)
  • 2.5 in (2)
  • 3 in (34)
  • 3.35 in;85 mm (16)
  • 3.38 in;86 mm (2)
  • 5 in (2)
  • 5.38 in (3)
  • 6 (2)
  • 6 in (7)
  • 6.1 mm (2)
  • 6-1/4 IN (158.800 MM) (4)
  • 6-1/8 (2)
  • 6-3/8 (2)
  • 9 in (4)
  • 9-1/4 in (4)
  • Show More...

• Length

  

  • 0.505 in (5)
  • 1 (5)
  • 1 in (6)
  • 1.338 in;33.99 mm (3)
  • 1.5 (2)
  • 1.54 in (3)
  • 1.56 in (3)
  • 1.69 in (2)
  • 1.70 in (2)
  • 1.84 (2)
  • 1/2 in (4)
  • 10 (5)
  • 10 Foot (2)
  • 10 ft (22)
  • 10.20 (2)
  • 100 (3)
  • 100 ft (6)
  • 1000 ft (3)
  • 11.08 in;284.4 mm (2)
  • 11.375 in (2)
  • 1-1/2 (4)
  • 1-1/2 in (2)
  • 1-1/4 (3)
  • 1-1/4 in (4)
  • 1-1/8 in (3)
  • 1-15/16 in (2)
  • 12 (2)
  • 12.4375 in (2)
  • 120 (2)
  • 1200 (3)
  • 1-21/32 in;42.1 mm (3)
  • 1-25/32 in (3)
  • 13.4 in;340 mm (3)
  • 1-3/4 in (4)
  • 1-3/8 in;34.9 mm (2)
  • 14.2 in;360.5 mm (2)
  • 14.287 in;362.9 mm (2)
  • 14.655 in;372.24 mm (2)
  • 15 in (4)
  • 1-5/16 in (9)
  • 16 in (2)
  • 1-7/8 in (3)
  • 1-7/8 in;47.6 mm (2)
  • 18 (8)
  • 2 (7)
  • 2 1/2 INCH (2)
  • 2 in (4)
  • 2.13 (4)
  • 20 ft (4)
  • 20.375 in (3)
  • 21.0 (2)
  • 2-1/8 in (2)
  • 2-11/16 (2)
  • 2-23/32 in;69.1 mm (4)
  • 2-3/16 in (2)
  • 2-3/32 in;53.2 mm (2)
  • 2-3/4 (3)
  • 240 (4)
  • 3 (2)
  • 3 1/2 INCH (2)
  • 3 in (14)
  • 3 INCH (2)
  • 3.125 (2)
  • 3.36 (17)
  • 3.38 INCH (2)
  • 3.5 (2)
  • 3.62 in;91.95 mm (2)
  • 3.69 INCH (2)
  • 3.81 (6)
  • 3.94 in;100.08 mm (2)
  • 3/4 in (3)
  • 3-1/2 in (2)
  • 3-1/4 in;82.6 mm (4)
  • 3-3/4 in (7)
  • 3-3/4 in;95.3 mm (3)
  • 37.688 in (3)
  • 37.75 in (4)
  • 4 (3)
  • 4 in (26)
  • 4 in;101.6 mm (6)
  • 4.188 in (2)
  • 4.40 in;111.8 mm (2)
  • 4.5 (2)
  • 4.5625 in (3)
  • 4.75 INCH (4)
  • 4.8 (2)
  • 4.81 (10)
  • 4.82 in;122.4 mm (2)
  • 4-1/2 in (2)
  • 4-1/2 in;114.3 mm (3)
  • 4-1/8 in (2)
  • 4-11/16 in (5)
  • 4-11/16 in;119.063 mm (5)
  • 5 (3)
  • 5 in (2)
  • 5.07 in;128.8 mm (2)
  • 5.1875 in (3)
  • 5.37 in (4)
  • 5.375 in (3)
  • 5.38 in (2)
  • 5.4 (2)
  • 5.5 (2)
  • 5.625 in (2)
  • 5.63 (2)
  • 5.94 in (2)
  • 5-1/2 in;139.7 mm (2)
  • 5-1/2 in;14.0 cm (2)
  • 5-1/4 in;13.3 mm (2)
  • 56.5 in (5)
  • 56.500 in (2)
  • 6 (19)
  • 6.00 (3)
  • 6.2 in (3)
  • 6.25 in (4)
  • 6.5 (2)
  • 6.88 (2)
  • 6.9 (2)
  • 600 (2)
  • 69 Millimeters (8)
  • 7 (6)
  • 7.05 in (2)
  • 7.125 in (6)
  • 7.25 in (3)
  • 7.31 in;185.67 mm (2)
  • 7.435 in;188.85 mm (2)
  • 7.4375 in (2)
  • 7.44 INCH (2)
  • 7.6 (2)
  • 71 Millimeters (4)
  • 8 (10)
  • 8.1 in;205.70 mm (2)
  • 8.12 in (4)
  • 8.125 in (3)
  • 8.1875 in (4)
  • 8.46 in;215 mm (2)
  • 9 (4)
  • 9 ft 10-1/2 in (4)
  • 9 ft 10-1/4 in (3)
  • 9 ft 11 in (8)
  • 9 ft 11-1/4 in (4)
  • 9 in (2)
  • 9 INCH (2)
  • 9.00 (2)
  • 9.1 in (2)
  • 9.1875 in (3)
  • 9.875 in (2)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap (3)
  • Show More...

• Model

  

  • 97272 (2)
  • CG (12)
  • EFST (2)
  • GUAL (4)
  • GUAT (3)
  • GUAX (3)
  • HUB (6)
  • Keystone (4)
  • PRST (2)
  • PV (2)
  • ST (2)
  • TPC (2)
  • UA (2)
  • UNF (6)
  • UNY (6)
  • XCE (18)
  • Show More...

• Shank Diameter

  

  • 0.25 (15)
  • 0.375 (6)
  • 0.4375 (3)
  • 1/2 in (12)
  • 1/4 in (3)
  • Show More...

• Cable Size

  

  • (2) 14 Gauge, (1) 12 Gauge (5)
  • (2) 14 Gauge, (2) 12 Gauge (3)
  • 32 to 104 (5)
  • NA (6)
  • Rigid: 1 in;EMT: 1 in (2)
  • Show More...

• Connection Type

  

  • 1/2 IN - 14 NPSM Thread (3)
  • 1/2 IN - 14 NPT Thread (5)
  • 3-Prong Plug (3)
  • 5/8 IN - 18 Thread (2)
  • Back;Side (3)
  • Back-wire screw & pressure plates (3)
  • Combination (3)
  • NPT (9)
  • Quick Connect Terminal (22)
  • Screw (3)
  • Screw Terminal (3)
  • Screw-In (3)
  • Snap-In (12)
  • Straight (27)
  • Teeter (4)
  • Threaded (165)
  • Threaded x Push In (5)
  • Threaded x Screw-In (11)
  • Threaded/Set Screw (16)
  • UNC (4)
  • Wire Leads (16)
  • Show More...

• Mounting Type

  

  • (4) Pad (20)
  • Bracket Mount (11)
  • Ceiling Mount (8)
  • DIN Rail Mount (26)
  • Ear Flush Mount (2)
  • Ear Mount (7)
  • Flush Mount (4)
  • Horizontal Mount/Vertical Mount (8)
  • Plug-In (8)
  • Plug-On (56)
  • Push-In (2)
  • Push-On (5)
  • Recessed Mount (7)
  • Screw Mount (29)
  • Stem And Swivel Fixed Mount (4)
  • Surface Mount (11)
  • Threaded (65)
  • Vertical Mount (7)
  • Wall Box (5)
  • Wall Mount (3)
  • Wall Mount;Ceiling Mount (14)
  • Show More...

• Overall Width

  

  • 0.5 in (3)
  • 0.520 in (2)
  • 0.75 in (35)
  • 0.820 in (2)
  • 1 in (9)
  • 1.5 in (2)
  • 1.97 in;50 mm (4)
  • 10 in (3)
  • 14.44 in (2)
  • 1-9/16 in (2)
  • 2 in (18)
  • 2.40 in;61 mm (16)
  • 2.68 in;68 mm (2)
  • 3 in (7)
  • 52.5 mm (2)
  • 74.2 mm (2)
  • 9-1/4 in (3)
  • Show More...

• Drive Type

  

  • Combo (4)
  • Hex (24)
  • Phillips (5)
  • Slotted (5)
  • Show More...

• Bundle Diameter

  

  • 0.0625 in (Minimum);1.59 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);1.75 in (Maximum);44.45 mm (Maximum) (4)
  • 0.0625 in (Minimum);1.59 mm (Minimum);2.0 in (Maximum);50.8 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);4.0 in (Maximum);101.6 mm (Maximum) (4)
  • 0.08 in (Minimum);2 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);1.14 in (Maximum);29 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);3.0 in (Maximum);76 mm (Maximum) (2)
  • 0.138 in (Minimum);3.5 mm (Minimum);1.77 in (Maximum);45 mm (Maximum) (3)
  • 0.138 in (Minimum);3.5 mm (Minimum);4.01 in (Maximum);102 mm (Maximum) (2)
  • 0.236 in (Minimum);6 mm (Minimum);3.54 in (Maximum);90 mm (Maximum) (3)
  • Show More...

• Overall Height

  

  • 0.380 in (5)
  • 1 in (4)
  • 12 in (2)
  • 2.5 in (2)
  • 2.53 in (2)
  • 2.55 in (6)
  • 2.938 in (3)
  • 3 in (35)
  • 3.19 in;81 mm (4)
  • 3.75 in;95 mm (18)
  • 5-3/4 in (6)
  • 88 mm (4)
  • 91.475 in (Open Height);97.727 in (Closed Height) (2)
  • Show More...

• Width

  

  • 0.09 in;2.29 mm (2)
  • 0.095 in;2.41 mm (2)
  • 0.14 (2)
  • 0.14 in;3.56 mm (4)
  • 0.14 in;3.6 mm (3)
  • 0.14 in;3.71 mm (2)
  • 0.18 in;4.6 mm (3)
  • 0.184 in;4.67 mm (2)
  • 0.186 in;4.73 mm (4)
  • 0.19 in;4.82 mm (2)
  • 0.27 in;7.0 mm (6)
  • 0.30 in;7.62 mm (4)
  • 0.5 (3)
  • 0.65 (4)
  • 0.75 (12)
  • 0.785 in;19.9 mm (4)
  • 1 (10)
  • 1.3 in;33.02 mm (2)
  • 1.31 in;33.3 mm (2)
  • 1.34 in (3)
  • 1.36 in (2)
  • 1.375 in (4)
  • 1.5 (13)
  • 1.5 in (4)
  • 1.500 in (3)
  • 1.53 in (2)
  • 1.53 in;38.9 mm (2)
  • 1.56 in (2)
  • 1.625 in (2)
  • 1.7 in (2)
  • 1.8 in (2)
  • 1.9 in (3)
  • 1.97 (4)
  • 1-1/4 in (3)
  • 11-3/8 INCH (2)
  • 1-15/16 in (6)
  • 1-3/4 (3)
  • 14.31 (3)
  • 1-5/8 (6)
  • 16-1/4 INCH (3)
  • 17.5 Millimeters (2)
  • 17.5mm (3)
  • 18-1/4 INCH (2)
  • 1-9/16 (2)
  • 1-9/16 in;4 cm (3)
  • 2 (17)
  • 2 in (15)
  • 2.04 in (2)
  • 2.06 (2)
  • 2.06 in;52.3 mm (3)
  • 2.1875 in (2)
  • 2.25 (2)
  • 2.25 in (2)
  • 2.28 in (2)
  • 2.3 (2)
  • 2.375 (2)
  • 2.4 (12)
  • 2.4375 in (3)
  • 2.49 (2)
  • 2.49 in;63.2 mm (2)
  • 2.5625 in (3)
  • 2.6 in (3)
  • 2.63 (5)
  • 2.68 (2)
  • 2.75 in (5)
  • 20-7/8 INCH (2)
  • 2-1/2 in (3)
  • 22-7/8 INCH (3)
  • 2-3/4 (2)
  • 28-7/8 Inch (3)
  • 29.75 (2)
  • 3 (10)
  • 3.063 in (2)
  • 3.12 in (2)
  • 3.125 (2)
  • 3.125 in (4)
  • 3.5 (2)
  • 3.5 in (2)
  • 3.83 in (2)
  • 3/8 (2)
  • 3-1/2 in (17)
  • 3-3/4 (2)
  • 4 (25)
  • 4 in (22)
  • 4 in;101.6 mm (6)
  • 4 INCH (6)
  • 4.31 in (2)
  • 4.5 (2)
  • 4.625 in (4)
  • 4-1/2 in;11.4 mm (2)
  • 4-11/16 (5)
  • 4-11/16 in (5)
  • 4-11/16 in;119.063 mm (5)
  • 5 (3)
  • 5.625 in (2)
  • 5.75 (2)
  • 52.5 Millimeters (2)
  • 52.5mm (5)
  • 5-3/4 in (8)
  • 6 (2)
  • 7.375 (2)
  • 7/8 in (2)
  • 7-3/8 (2)
  • Show More...

• Base Type

  

  • 2G11 (2)
  • G24d (13)
  • G24q (2)
  • G24q/GX24q (8)
  • Gx23 (2)
  • Show More...

• Number Of Phases

  

  • 1 (8)
  • 1;3 (8)
  • 3 (2)
  • Show More...

• Handle Material

  

  • Plastic (2)
  • Plastic Grip (6)
  • Rubber (2)
  • Steel (6)
  • Show More...

• Height

  

  • 0.358 in;9.1 mm (4)
  • 1 (2)
  • 1.438 in (2)
  • 1.625 in (2)
  • 1.64 in;41.7 mm (3)
  • 1.688 in (2)
  • 1.70 (2)
  • 1.75 in (2)
  • 1.88 in;47.8 mm (3)
  • 1.90 (2)
  • 10-1/8 in (2)
  • 1-1/2 in (14)
  • 1-1/2 in;38.1 mm (5)
  • 1-1/8 in;28 mm (3)
  • 1-13/16 in (4)
  • 1-3/8 in (2)
  • 1-5/8 in (2)
  • 15-3/8 INCH (2)
  • 1-7/8 (3)
  • 1-7/8 in (2)
  • 18-1/4 INCH (2)
  • 2 (9)
  • 2 in (12)
  • 2.05 in (2)
  • 2.25 (3)
  • 2.25 in (6)
  • 2.3 (2)
  • 2.375 (2)
  • 2.375 in (2)
  • 2.4375 in (3)
  • 2.5 (4)
  • 2.53 (12)
  • 2.55 (17)
  • 2.625 in (2)
  • 2.65 in (4)
  • 2.75 (3)
  • 2.92 (2)
  • 2-1/2 in (8)
  • 2-1/8 in (15)
  • 2-1/8 in;53.975 mm (3)
  • 2-1/8;53.975 mm (4)
  • 2-11/16 (2)
  • 2-3/4 in (2)
  • 2-5/16 in (5)
  • 28-7/8 Inch (2)
  • 2-9/16 in (2)
  • 3 (12)
  • 3.19 (4)
  • 3.28 in (2)
  • 3.41 in (2)
  • 3.438 in (2)
  • 3.5 (3)
  • 3.5 in (4)
  • 3.53 (6)
  • 3.5625 in (3)
  • 3.75 (13)
  • 3.88 (2)
  • 3/4 in (6)
  • 3-1/2 in (6)
  • 3-1/4 (2)
  • 3-13/16 in (4)
  • 32 to 104 (5)
  • 3-3/4 (7)
  • 3-3/4 in (6)
  • 34-7/8 INCH (2)
  • 4 (19)
  • 4 INCH (5)
  • 4.125 in (2)
  • 4.375 (2)
  • 4.5 (2)
  • 4.563 in (2)
  • 4.75 (3)
  • 40-7/8 INCH (2)
  • 4-1/16 in (4)
  • 4-11/16 (5)
  • 44 (2)
  • 5.4375 in (2)
  • 5.5 (2)
  • 6 (2)
  • 6.03 in (3)
  • 7/8 in (5)
  • 7-1/4 in;18.4 mm (2)
  • 88 Millimeters (2)
  • 88mm (6)
  • 92mm (3)
  • Show More...

• Hub Size

  

  • 1 in (25)
  • 1 INCH (3)
  • 1" (5)
  • 1/2 in (26)
  • 1/2" (7)
  • 1-1/2 in (20)
  • 1-1/2 INCH (4)
  • 1-1/4 in (8)
  • 1-1/4 INCH (2)
  • 1-1/4" (3)
  • 2 in (18)
  • 2 INCH (3)
  • 2" (4)
  • 2-1/2 in (3)
  • 3 in (5)
  • 3/4 in (44)
  • 3/4" (5)
  • 4 in (3)
  • Show More...

• Color Temperature

  

  • 3500;3500 (3)
  • 4000 (3)
  • 4000 K (2)
  • 4000;4000 (4)
  • 5000 (2)
  • Show More...

• Number Of Knockouts

  

  • 10 (2)
  • 11 (3)
  • 13 (12)
  • 16 (5)
  • 17 (6)
  • 24 (2)
  • 26 (2)
  • 4 (3)
  • 5 (2)
  • 6 (2)
  • 7 (8)
  • 8 (3)
  • 9 (8)
  • Show More...

• Average Life

  

  • 100000 (3)
  • 50,000 (2)
  • 50000 (4)
  • Show More...

• Shape

  

  • C (11)
  • Deep (2)
  • LB (17)
  • LL (9)
  • LR (7)
  • Octagon (12)
  • Rectangular (39)
  • Round (60)
  • Shallow (2)
  • Square (30)
  • Straight (13)
  • T (15)
  • TB (6)
  • X (5)
  • Show More...

• For Use With

  

  • A and C Series Channel and Inserts (3)
  • Aluminum Interlocking Grounding Metal-Clad Cable (5)
  • Box;Enclosure (2)
  • Circuit Wiring (7)
  • Conduit (30)
  • Connect Rigid and IMC Conduit to a Threadless Opening in an Enclosure (6)
  • Damp and Wet Locations (7)
  • Direct Sunlight (2)
  • Electrical Devices (7)
  • EMT and Rigid Conduit to Threaded Rod (5)
  • EMT Conduit (14)
  • ENT Box (2)
  • Entering The Conduit into the Building (4)
  • Federal Pacific Electric Loadcenter (6)
  • Flexible Metal Conduit (3)
  • Gang Box (2)
  • Ground/Buried (40)
  • Grounding Wire (5)
  • Halo and Other Housings (3)
  • Hazardous Area;Wet Location (25)
  • Hazardous Areas (2)
  • Knockout (5)
  • Liquid Tight Flexible Metal Conduit (20)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (4)
  • Liquid-Tight Flexible Metallic Conduit (20)
  • Masonry Box (2)
  • Non-Metallic Cable (2)
  • Non-Metallic Liquid-Tight Conduit (6)
  • Non-Metallic Liquid-Tight Conduit, Type B Only (4)
  • Portable Cords including S, SO, STO, ST, SJ, SJT, SJTO and SVO (12)
  • Recessed Downlighting (3)
  • Rigid and IMC Conduit (19)
  • Rigid Conduit (75)
  • Rigid Conduit Body (16)
  • Rigid Metal Conduit (2)
  • Rigid/Imc Conduit (17)
  • Schedule 40 and 80 Conduit (23)
  • Switches;Receptacles;Fans;Lights (3)
  • Threaded Rigid and IMC Conduit (3)
  • Type Br Breakers (5)
  • Type BR Loadcenters (29)
  • Type CH Loadcenters (26)
  • Zinsco RC Series Loadcenter (2)
  • Show More...

• Application

  

  • (1) Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet) (2) 155 Mb/s ATM, 622 Mb/s ATM (3) Token ring 4/16 (4) Voice/data systems (5) Voice over Internet Protocol (VoIP) (4)
  • 30°Change in Direction of a Conduit Run (2)
  • 600 V and lower circuits. (3)
  • 90°Change in Direction of a Conduit Run (23)
  • Act as Pull Outlets for Conductors being Installed;Provide Openings for Making Splices and Taps in Conductors;Connect Conduit Sections;Provide Taps for Branch Conduit Runs;Make 90° Bends in Conduit Runs;Provide for Access to Conductors for Maintenance and Future System Changes (64)
  • Act as Pull Outlets for Conductors that are Stiff Due to Large Size or Type of Insulation;Make 90° Bends in Conduit System;Allowing Straight Pull in Either Direction;Provide for Conduit Service Entrance to Buildings;Provide for Conductor Entrance to Motors;Provide Access to Wiring for Maintenance and Future Expansion (4)
  • Bolt-On for use in Pushmatic and Bulldog Load Centers (4)
  • Bolt-On for use in Pushmatic Load Centers (6)
  • Bricks (3)
  • Broad Band Video;Gigabit Ethernet;Fast Internet (3)
  • Cable ties are primarily used to cinch wires and cables together to form a neat and organized bundle (7)
  • Circuit Protection (10)
  • Commercial (13)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (73)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (35)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (3)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (19)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (4)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (3)
  • Commercial, Industrial, Residential, Indoor, HVACR (2)
  • Commercial, Industrial, Residential, Outdoor, HVACR (7)
  • Commercial;Industrial;Residential;Outdoor;HVACR (3)
  • Commercial;Non-Hazardous Location (4)
  • Commercial;Residential;Office Phone;Fax;Internet System (2)
  • CONCEALED AND EXPOSED LOCATION, DIRECT BURIAL, EQUIPMENT GROUNDING (2)
  • Concealed;Exposed Location (2)
  • Concrete-Encased, Direct-Burial Note: Purchaser is responsible for installation design and determination of the appropriateness of the product for any specific application (4)
  • Conduit (41)
  • Conduit Body Used for Change of Direction of Conduit Run (12)
  • Conduit;Commercial;Industrial (3)
  • Damp Locations;Wet Locations (7)
  • Datacenters - IT Space: CI and Hyper ConvergedGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - OtherOther (2)
  • Datacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - OtherOtherGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional Energy (4)
  • Datacenters - IT Space: CI and Hyper ConvergedOtherGeneration - Conventional Energy - Conventional EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - OtherGeneration - Renewable Energy - Alternative Energy (3)
  • Datacenters - IT Space: CI and Hyper ConvergedOtherGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - Other (3)
  • Datacenters - IT Space: CI and Hyper ConvergedOtherGeneration - Renewable Energy - Alternative EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - OtherGeneration - Conventional Energy - Conventional Energy (2)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (7)
  • Datacom and Low Voltage;Electrical Fixing and Fastening (6)
  • Dusk to Dawn Lighting Control (17)
  • Education,Government,Healthcare,Hospitality,House of Worship,Offices & Banks,Residential,Retail (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (9)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (12)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMsElec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (6)
  • Electrical Fixing and Fastening (3)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (5)
  • Electrical Raceway System (10)
  • Entry Point for Overhead Power and Communication Wires into a Building (4)
  • EXPOSED LOCATION, INDUSTRIAL MACHINERY (2)
  • Exterior Lighting, Interior Lighting, Security Lighting, Parking Lot Lighting, Bell Ringing, Electric Motors, Electric Pump, Indoor (2)
  • For Bore Hardwood, Softwood, Plywood And Drywall (6)
  • For Bores Clean Holes At Any Angle In Wood, Plastic, Plywood And Formica (5)
  • For dead-end terminations (2)
  • For Electricians, Plumbers, Utilities And Any Trade Requiring Fast Hole Drilling In Clean Or Nail-Embedded Wood (3)
  • For Grounding And Bonding Applications (3)
  • For Hickeys (2)
  • For Service Entrance Cable (6)
  • For Threaded Rigid Conduit And IMC (2)
  • For use as a supplemental protection device (8)
  • For use as branch protection (5)
  • For use with 664 SC and 664 CI floor boxes (2)
  • For use with A and C series channel and inserts (3)
  • For use with conduit (10)
  • For use with non-metallic sheathed cable (2)
  • For Use With Threaded Metal Conduit (16)
  • For Use With Threaded Metal Conduit And IMC (24)
  • For Use With Threaded Rigid Metal Conduit and IMC (3)
  • For Used To Support Runs Of RMC, IMC And EMT (5)
  • For Wet Location (3)
  • For Wood Boring (2)
  • General Purpose (2)
  • Generation - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper ConvergedOtherGeneration - Renewable Energy - Alternative EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - Other (2)
  • Generation - Conventional Energy - Conventional EnergyOtherDatacenters - IT Space: CI and Hyper ConvergedGeneration - Renewable Energy - Alternative EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - Other (2)
  • Generation - Conventional Energy - Conventional EnergyOtherDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - OtherGeneration - Renewable Energy - Alternative Energy (2)
  • Generation - Conventional Energy - Conventional EnergyOtherGeneration - Renewable Energy - Alternative EnergyDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - Other (3)
  • Generation - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - OtherOther (2)
  • Generation - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyOtherMarine Vessels and Equipment - Marine Vessels and Equipment - OtherDatacenters - IT Space: CI and Hyper Converged (2)
  • Generation - Renewable Energy - Alternative EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - OtherOtherGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper Converged (7)
  • Generation - Renewable Energy - Alternative EnergyOtherDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - OtherGeneration - Conventional Energy - Conventional Energy (7)
  • Generation - Renewable Energy - Alternative EnergyOtherGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - Other (7)
  • Generation - Renewable Energy - Alternative EnergyOtherGeneration - Conventional Energy - Conventional EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - OtherDatacenters - IT Space: CI and Hyper Converged (3)
  • Generation - Renewable Energy - Alternative EnergyOtherMarine Vessels and Equipment - Marine Vessels and Equipment - OtherDatacenters - IT Space: CI and Hyper ConvergedGeneration - Conventional Energy - Conventional Energy (2)
  • Grounded Electrical Wiring System (9)
  • Grounding and Bonding Applications (7)
  • Grounding Wire (15)
  • HVACR (2)
  • In Use (3)
  • Incandescent Lighting;Fluorescent Lighting;HVACR;CFL Lighting;LED Lighting;Entryway Lighting;Deck Light Controls;Landscape Light Controls;Attic Fans;Pumps;Hallway Lighting;Small Commercial Signage and Store Lighting (3)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (3)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (9)
  • Indoor (6)
  • Indoor, CFLs Lighting, Fans, Electric Motors, Heaters, HVACR (7)
  • Indoor, HVACR, Industrial (3)
  • Indoor/Outdoor (2)
  • Industrial (9)
  • Industrial;Commercial;Manufacturing;Residential;Agricultural;Signage;Athletic Fields (7)
  • Join EZ Flex Electrical Nonmetallic Tubing to ENT box or fitting (2)
  • Join Lengths of Conduit Pipe Together with two Solvent Weld Socket End (6)
  • LED Pool Lights;Submersible Fixtures;Outdoor Landscape;Decorative Lighting (2)
  • lighting (15)
  • Lighting Control (38)
  • Marine Vessels and Equipment - Marine Vessels and Equipment - OtherOtherDatacenters - IT Space: CI and Hyper ConvergedGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional Energy (2)
  • Marine Vessels and Equipment - Marine Vessels and Equipment - OtherOtherGeneration - Renewable Energy - Alternative EnergyDatacenters - IT Space: CI and Hyper ConvergedGeneration - Conventional Energy - Conventional Energy (3)
  • Marine Vessels and Equipment - Marine Vessels and Equipment - OtherOtherGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper Converged (4)
  • Masonry Box (2)
  • Mechanical/Home Repair/Auto/Plumbing (4)
  • Metal Cutting (8)
  • Meter Socket With Main And Load Center (2)
  • Motor and Power Control Equipment (23)
  • New work and Retrofit (2)
  • NM Cable (3)
  • Non Metallic Cable (6)
  • Non-Indicating (6)
  • Offered in Numerous Configurations for 90 Degree Bends;Taps or Splices or Mounting Outlets (3)
  • Other (2)
  • Other IT and Datacom - IT and Datacomm - OtherOther IT and Datacom - Other InfrastructuresInd Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherDatacenters - IT Space: CI and Hyper ConvergedDatacenters - IT Space: Enterprise / Server Room / Network ClosetWater and Wastewater Systems - Water and Wastewater Systems - OtherStationary Mach Equip In Factory - Assembly Equipment (Electronics, Solar, Cars, Medicals (2)
  • OtherDatacenters - IT Space: CI and Hyper ConvergedGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyMarine Vessels and Equipment - Marine Vessels and Equipment - Other (2)
  • OtherDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - OtherGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional Energy (3)
  • OtherGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - OtherGeneration - Renewable Energy - Alternative Energy (5)
  • OtherGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper ConvergedMarine Vessels and Equipment - Marine Vessels and Equipment - Other (11)
  • OtherMarine Vessels and Equipment - Marine Vessels and Equipment - OtherGeneration - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: CI and Hyper Converged (2)
  • Outdoor (20)
  • Plug-In for use in Federal Pacific Load Centers (18)
  • Plug-In for use in Zinsco Load Centers (12)
  • Pool/Spa (3)
  • Power and Control Circuits (2)
  • Protect Conductors in Threaded Rigid Conduit;Act as Pull and Splice Boxes;Connect Lengths of Conduit;Change Conduit Direction;Provide Access to Conductors for Maintenance and Future System Changes;Act as Mounting Outlets for Fixtures (with Appropriate Covers);Act as Sealing Fittings (with Appropriate Covers) (25)
  • Protects Wiring Which is Being Pulled Through Concrete Vault Wall (3)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead or Into a Rigid Conduit;Form a Mechanical Grip and Water and/or Oil-Resistant Seal for Cord;Form a Non-Slip Connection or Termination for Flexible Cord (11)
  • Provide a Means for Passing a Cord Cable Into an Enclosure;Form a Watertight seal for Cord;Provide Pull-Out Protection for Cord;Ensuring a secure Connection (12)
  • Provides Threaded Coupling Between Lengths of Rigid Conduit and IMC Conduit Elbows, Where Neither Can Be Rotated (2)
  • Pulling;Splicing (14)
  • Reduce The Size of Internal Female Threads. 1/2" Thru 2" Steel, 2 1/2" Thru 4" Malleable Iron (15)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - Other (26)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - OtherOther (3)
  • Residential, Industrial, Sports Fields, Commercial, Agricultural, Signage (2)
  • Serve as Pulling Fittings;Make Bends in Conduit System;Provide Openings for Splicing;Connect and Change Direction of Conduit Runs;Allow Connections for Branch Runs;Permit Access to Conductors for Maintenance (2)
  • Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics (3)
  • Stationary Mach Equip In Factory - RoboticsElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMsElec Assemblies, Panels & EOEM - Elec Assemblies/Panels/EOEMs - AftermarketElec Assemblies, Panels & EOEM - Control Panels for MachinesElec Assemblies, Panels & EOEM - Panel BuildersInd Facilities & Factories - Facility: Power Distribution and ControlElec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (2)
  • Stationary Machinery and Equipment Outside Factory - Stationary Machinery and Equipment Outside Factory - Other (3)
  • Strut Fittings (2)
  • Suitable for Fixture Support Up to 50 Lbs (2)
  • Support and framing applications (5)
  • Terminate Conduit Runs Through The Wall of a Sheet Metal Electrical Enclosure (2)
  • The Direction of a Conduit Run by 45°;Indoor/Outdoor (14)
  • Thermal Magnetic (18)
  • To Allow Easy Disassembly of Conduit System;To Function as Junction and Pull Box for Multiple Conductors And Conduits;Indoors or Outdoors Where Space is Limited;Such as in Gasoline Pumps (2)
  • To Connect Threaded Metal Conduit to a Threadless Opening in a Box or Enclosure (9)
  • To connect threaded stainless conduit to a threadless opening in a box or enclosure in an outdoor or indoor location. To positively bond conduit to a box or enclosure. (2)
  • To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. (24)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Available with or Without Bolt (3)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Strap Has Integral Threads (2)
  • Underground or Aboveground (25)
  • Unshielded (4)
  • Used in extremely high temperature applications such as commercial ovens and refrigeration, industrial furnaces and foundries (4)
  • Used to Compensate for Centerline Differences (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • Used to Connect Rigid or IMC Conduit to a Threadless Opening in an Enclosure (6)
  • Used to Join Emt to Flexible Metal Conduit. Screw-In Type For Flex. Compression Type For EMT (3)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (56)
  • UV inhibited for use in direct sunlight (2)
  • Wet Location (3)
  • Wire Termination (2)
  • Wood Cutting (2)
  • X X 104.1000 IN (2)
  • Show More...

• Special Features

  

  • (5) Steps Adjustments, Permalock[R] Fastener, Right Angle Teeth, Reinforced Edge (2)
  • (7) Steps Adjustments, Permalock[R] Fastener, Right Angle Teeth, Reinforced Edge (2)
  • 2 In Center Spacing (2)
  • 7/8-1 Rod Size - 1/2-3/4 Pipe Size (2)
  • Abrasion Resistant;Crush Resistant;Strain Resistant;Oil Resistant;Sunlight Resistant (2)
  • Accommodate sealing, dome, hub and union hub covers and canopies;Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity;Complies with a wide range of classified area requirements;Connect conduit lengths and change direction of conduit runs;Corrosion-resistant ideal indoors or out;Covers have pry notches for bar or wrench;Explosionproof, dust-ignitionproof;For pulling of wires;Function as sealing fittings when used with sealing covers;Furnished with copperfree (4/10 of 1 PCT ma (14)
  • Accommodate wiring devices such as switches and receptacles;Accurately tapped, tapered threads for tight, rigid joints, ground continuity;Both malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit;Corrosion-resistant ideal for indoor and outdoor installations;Internal grounding screws standard;Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock;Permit access to conductors for maintenance;Provide excellent service i (24)
  • Adjustable mud ring accommodates various thicknesses of drywall. Can be adjusted after the installation of drywall. Box remains fixed in place when mud ring is removed. Includes multiple knockouts on each side of the box. Assemblies keyed for precise alignment when installed on both sides of a stud (2)
  • adorne Plastic wall plates provide the perfect finishing touch to any installation and come in a variety of classic and contemporary colors. (2)
  • All Sizes Take Standard Covers and Accessories or Devices (2)
  • All Springs shall Mechanically Attached to Channel Nut (3)
  • Ball Burnished, mirror smooth finish (2)
  • Bell End for Easy Installation (7)
  • Cadmium sulfide photocell;Delay action eliminates load switching OFF due to car headlights, and lightning (2)
  • Can be used with a locknut to terminate conduit at an enclosure;Fasten and ground threaded rigid, IMC metal conduit to an enclosure, copper or aluminum conductors;Insulating liner material is self-extinguishing;Lug used to connect bonding jumper to a neutral bus bar;Lugs not sold separately;Provides a compact means of grounding conduit through an insulated bushing;The plastic liner is tough, It resists corrosion, chemicals and temperature extremes, surface friction is so low that wires can be pulled with v (3)
  • CLIP,CONDUIT, (3)
  • Concentric and Eccentric Knockouts;Use in Fire-Rated Assemblies (7)
  • Concretetight (3)
  • Concrete-Tight (9)
  • Conduit Hubs Have Tapered Threads and Feature Integral Bushings for Protection of Wire Insulation (31)
  • Controls 1000 W incandescent or halogen loads. Paddle turns on/off. Slide up to brighten, down to dim. (4)
  • Controls 120 V/250 W LED/CFL, and 500 W Inc and ELV loads. Paddle turns on/off. Slide up to brighten, down to dim. (2)
  • Controls 150 W dimmable LED/CFL (screw-base), 600 W incandescent, or halogen loads. Paddle turns on/off. Slide up to brighten, down to dim. Provides reliable dimming of dimmable LEDs/CFLs, as well as halogens and incandescents. (6)
  • Controls 150 W LED/CFL (screw-base) or 600 W incandescent/halogen loads. Toggle turn lights on/off. Slide up to brighten, down to dim. Provides reliable dimming of dimmable LEDs/CFLs as well as halogens and incandescents. (2)
  • Controls 250 W dimmable LED/CFL (screw-base), 600 W incandescent/halogen or 350 W Hi-Lume 1 percent 2-wire LED driver loads. Paddle turns on/off. Slide up to brighten, down to dim. Provides reliable dimming of dimmable LEDs/CFLs, as well as halogens and incandescents. (3)
  • Controls 600 W incandescent or halogen loads. Paddle turns on/off. Slide up to brighten, down to dim. (7)
  • Controls 600 W incandescent or halogen loads. Toggle turn lights on/off. Slide up to brighten, down to dim. (3)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (40)
  • Corrosion Resistant (18)
  • Corrosion Resistant, Automatic Lock (2)
  • Corrosion Resistant:Rust Resistant:Sunlight Resistant;Rated For 90° Cable;Rigid Nonmetallic PVC Schedule 40;Belled End (15)
  • Corrosion Resistant:Rust Resistant:Sunlight Resistant;Rated For 90° Cable;Rigid Nonmetallic PVC Schedule 80;Belled End (10)
  • Cover Openings on an Angle Permitting Conductors to be Pulled Straight Through Hubs from Either Direction;Domed Covers to Permit Easy Conductor Bends (Relieves Strain On Insulation);Cover and Gasket Furnished;Taper Tapped Hubs with Integral Bushings (4)
  • Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces (6)
  • Designed to meet UL 360 ID/OD dimension requirements (4)
  • DIN Rail Mounting, Finger Safe and Multi-Function Terminals (4)
  • Double Wing Spurs For Easy Hole Formation; Patented Cutting Edge For Fast, Easy Wood Boring; 1/4 IN Quick-Change Hex Shank For Use In All Universal QUIK-LOK Extensions (2)
  • Duct Direction Horizontal;Includes Permanently Lubricated Plug-In Motor, Blower Wheel (3)
  • Durable, textured PVC ivory finish. Blends with walls and ceilings. Consult factory for special colors. Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use. Accommodates communication and/or power wiring. Can be used for communications, computer lines, surveillance systems, fire alarms, outlets, and more. Snap-on cover. (4)
  • Dusk-to-dawn control of outdoor lighting;Zero-cross technology helps device withstand severe inrush current and extends relay life (3)
  • Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability (2)
  • Ears (6)
  • Easy to install (7)
  • Easy to Program for 24-Hour or 7-Day Load Control (3)
  • Easy, Push-In Installation (2)
  • Electric Resistant;Corrosion Resistant (9)
  • Excellent For Connecting Copper or Copper-Clad Steel Grounding Conductor to Ground Rod or Pipe. Specially Designed Spacer Provides Proper Alignment Between Cable and Elctrode and Affords More Positive Contact Area. (2)
  • Explosionproof;Dust Ignitionproof;Rain Tight;Threaded Cover Openings;Smooth Integral Hub Bushing Protects Conductor Insulation When Pulling (25)
  • Fan controls (3)
  • Features: Any Head Style Screw can be Used (3)
  • Features: Automatic Voltage Detection for Fast, Easy, Out-of-the-Box Installations, Control Different Load Types and Voltages from a Single Control, Adjust Daylight Savings Time Through Software, Rather than DIP Switches, Configurable Outputs Allow These Models to Cover Various Types of Applications with a Single Clock, New Mode of Operation Allows For Manual On/Off Buttons to Operate as a 2-Hour Override, Non-Volatile Eeprom Memory Protects Programming Indefinitely, 2 Year Warranty (2)
  • Features: Built-In Circuit Protection will Disconnect Power to the Transformer in Case of Defect or Overload (2)
  • Features: Cadmium Sulfide Photocell, Polypropylene Housing with UV Protection, 2400 Volt Open Type Spark Gap Arrester (2)
  • Features: Cadmium Sulfide Photocell, Sonic-Welded Polycarbonate Housing, 6 IN Wire Leads (2)
  • Features: Cadmium Sulfide Photocell, Sonic-Welded Polycarbonate Housing, 6 IN Wire Leads, Light Level Slide Adjustment (2)
  • Features: Corrosion Resistant, Stainless can be Mildly Magnetic (2)
  • Features: Energy-Efficient Mechanical Timers do not require Electricity to Operate, Automatically Limit the ON Times, Hold Feature Enables User to Override the Automatic Shut-Off Function, Press-On Knob Design Ensures Quick and Easy Installation, CFL Compatible, Provide Direct Replacement of a Standard Wall Switch in Single or Multi-Gang 2-1/2 IN Deep Junction Boxes, Spiral Time Scale to Provide Easy Selection of the Time Setting, Standard Industry Accepted Molded Plate and Knob, Minimum of 0.085 IN Thread (2)
  • Features: Energy-Efficient Mechanical Timers do not require Electricity to Operate, Automatically Limit the ON Times, Press-On Knob Design Ensures Quick and Easy Installation, CFL Compatible, Provide Direct Replacement of a Standard Wall Switch in Single or Multi-Gang 2-1/2 IN Deep Junction Boxes, Spiral Time Scale to Provide Easy Selection of the Time Setting, Standard Industry Accepted Molded Plate and Knob, Minimum of 0.085 IN Thread Engagement, Secure Teeter-Type Terminal, 1 Year Warranty (4)
  • Features: Energy-Efficient Mechanical Timers do not require Electricity to Operate, Automatically Limit the ON Times, Rugged Time Dial Plate Easily withstands the Abuse Encountered in Commercial Environments, Commercial "Brushed Metal" (Plastic Construction) look meets NEC Requirements, Press-On Knob Design Ensures Quick and Easy Installation, CFL Compatible, Provide Direct Replacement of a Standard Wall Switch in a Single Gang 2-1/2 IN Deep Junction Boxes, Spiral Time Scale to Provide Easy Selection of th (2)
  • Features: Heavy Duty Die-Cast Zinc With Powder Finish; Blank Cover Is Stamped Aluminum; Die-Cast 1-3 Hole Covers Are UL Listed And CSA Approved; Meet All Federal Specifications; Round Covers Supplied With Gasket And Stainless Steel Mounting Screws; 3-Hole Cover Inc (3)
  • Features: No-Twist Connection Reduces Repetitive Motion Fatigue; Low Insertion Force For Fast And Easy Connections; Compact Size Makes Installation Easy; Clear Shell Gives Visual Verification Of Connection; UL Listed To 486C And CSA Certified To C22.2 #188; UL 467 Listed For Grounding And Bonding Applications; 600V Maximum Building Wire, 1000V; Maximum Signs And Lighting Fixtures; Shell Rated To 105 DEG C; Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 DEG C (221 DEG F); Model: 39 (2)
  • Features: Only Two Screws Required to Attach Lid To Base, Easy Access Ground Bar, Innovative Strain Relief Design, Accepts Multiple Conduit Sizes, Platform Design Offers Ease Of Installation, One External Bonding Lug, Supports Up to Two Pool/Spa Lights, Sloped Platform Design Provides Ultimate Convenience, Supports Up To Four Pool/Spa Lights, Watertight, Multi-Fixture Enclosure (2)
  • Features: Provides direct 24-Hour control of most loads, 1 to 12 ON/OFF operations each day, Minimum ON/OFF times of 1 hour, Manual override, 1 Year Warranty (6)
  • Features: Reusable Six Compartment Box, Handy Assortment (2)
  • Features: Trippers slide Up/Down in dial slots for fast, accurate setting, Provides up to 96 operations (48 ON/48 OFF) every 24 hours, one year Limited warranty (3)
  • Features: U Bolts are Generally used to Support Conduit from Strut, Provided with Hex Nuts and Plate, NC Rolled Threads (4)
  • Features: Up to 10 ON/OFF operations each day, Minimum ON/OFF times of one hour, Manual override, One ON and one OFF tripper and three day-skipper screws, 1 Year Warranty (3)
  • Features: Wedge Anchors can be Installed through the Fixture, Full Thread (4)
  • Fixture Rated (8)
  • Fixture Rated;Made of Steel (6)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 75 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 15 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 25 Lb (3)
  • Flange Thickness 5/16 To 1/2 In, Rotation 360 Deg Pivot, Static Load Capacity 75 Lb (3)
  • For Rigid and IMC Conduit (15)
  • Form 7 Condulet Outlet Bodies Approach Conduit in Size For Neat;Compact Installations;Orm 7 Has Exclusive Snaptight and Wedgenut Cover Attachment to Provide Clear;Unobstructed Cover Opening;Conduit Hubs Have Tapered Threads and Feature Integral Bushings (33)
  • Friction Clip Retention (3)
  • Helps reduce drop wires by up to 66% (2)
  • High performance MCB provides compact supplementary, energy limiting, circuit protection (8)
  • High-Magnetic (3)
  • Includes Attached Gasket and Mounting Hardware (2)
  • Includes ground screw with pigtail lead (3)
  • Includes Lid, Gasket and Screws (11)
  • Includes Non-Metallic Damper/Duct Connector (2)
  • Includes Rejection Tab feature (10)
  • Induction Hardened Tip For Added Nail Durability; Coated Flutes For Fast Chip Removal; Impact Rated Shank (3)
  • Intermateability UL Listed and CSA Certified interchangeability with competitive products. Suitable for wet locations when used with gaskets. Innovative spring clip design for installation ease and repeat usage. Smooth integral wire bushings protects cabl (24)
  • Low profile head is designed to prevent snags on uneven surfaces and easier to pull through bulkheads. Non-magnetic stainless steel locking device insures both maximum strength and the right tightness every time (16)
  • Made of Steel (17)
  • Made of Steel, Welded Construction (8)
  • Made of Steel. Drawn Construction (3)
  • Molded with Center Stop;Sunlight Resistant (6)
  • Multiple Seal Plug/Connector Interface Keeps Out Contaminants;Floating Blade Construction Provides Self-Alignment, And A Better Mechanical And Electrical Connection Minimizing Wear And Heat Generation;Transparent Wiring Guide to Verify All Wire Strands Are In Place Before Securing Wire (2)
  • Multiple Seal Plug/Connector Interface Keeps Out Contaminants;Resists Vapor And Water From High-Pressure Wash Down Up to 1000psi;Floating Blade Construction Provides Self-Alignment, And A Better Mechanical And Electrical Connection Minimizing Wear And Heat Generation (2)
  • No Bridge/Internet Needed-wireless control via HALOHome Bluetooth Mesh (4)
  • No neutral required (5)
  • Non-Metallic Clamps Offer the Same Chemical Resistance as Carlon Non-Metallic Conduits for a Complete, Corrosion Resistant System (2)
  • No-Twist Connection Reduces Repetitive Motion Fatigue (7)
  • One 1/2 in and two 3/4 in knockout (2)
  • One Female Threaded End and One Solvent Weld Bell End (2)
  • Ordinary, Wet, or Dry Locations;Extended Range with Superior Strain Relief (11)
  • O-Ring Gasket;Grounding Lug (2)
  • Plain End Connection;Schedule 80 Extra Heavy Wall Nonmetallic (8)
  • Plain-End Connections are Solvent Weld (25)
  • Post-painted housings and 100% acrylic non-yellowing lenses (2)
  • Preset feature (3)
  • Protects Wiring Which is Being Pulled Through Concrete Vault Walls;Easy Installation (3)
  • provide spacing from mounting surface when used with pipe clamps (5)
  • Provides Direct 24-Hour Control Of Most Loads;1 to 12 On/Off Operations Each Day;Minimum On/Off Times Of 1 Hour;Manual Override;1 Year Warranty (4)
  • PS Version Features Non-Conductive, Non-Corrosive Polymer (Plastic) Trim Ring (2)
  • Push-On Installation;No Tools (16)
  • Q line circuit breakers are one-inch wide per pole, compact, thermal-magnetic devices designed for residential and commercial applications. The QB breakers are bolt-on versions of the Q Line used for bolting to the bus connections of load centers and lighting panels. All Q Line circuit breakers feature Quick-make / Quick-break mechanisms, common trip bars, and easy to spot trip indication to ensure safety and reliability. Q Line breakers are available in 1, 2, and 3 pole versions, can be ordered with auxil (2)
  • Quick coil changing ability allows for easy maintenance;Shrouded or fingerproof terminals reduce possibility of electrical shock (22)
  • Raised Ground Screw Location in the Welded Boxes Saves time in Installation (11)
  • Rugged Construction protects Cord from Damage;Compact Design Permits close Spacing of Fittings on panel Applications;Tightening One Nut Creates Watertight Seal;Male Tapered Thread NPT (12)
  • Sealing Ring and Groove with Innovative Profile Better Than Standard O-Ring (9)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (4)
  • Sealing Sleeves on All Conduit Openings;Superior Corrosion Protection (2)
  • SHOX imapct absorption system, ProTop -versatile & durable, Da Boot, Double Rivet Step Construction (3)
  • Side dovetail rail and groove design allows for side by side interchangeability of conduit spacer sizes while maintaining horizontal stability. Locking keyways incorporated into intermediate spacers eliminate the need for costly top spacers in each size. They provide for the use of a beaded strap that helps secure the top section of conduit. 1 and 2 inches Snap Loc reducers allow fixturing of 1 or 2 inches conduit inside larger spacers. The Snap Loc rebar holder helps provide stabilization on large banks o (4)
  • Slide dimmers (2)
  • Snap-In Place Design Eliminates The Need For Solvent Cement (2)
  • Static Load Capacity 160 Lb, Flange Thickness 1/8 To 1/4 In, With Thread Impression (2)
  • Static Load Capacity 200 Lb (2)
  • Static Load Capacity 25 Lb (2)
  • Static Load Capacity 300 Lb (2)
  • Superior Protection, Strength, Safety and Ductility for your Most Demanding Wiring Job (10)
  • Supplied with Union Hubs, Which Makes it a Compact Assembly;Have a Variety of Hub Arrangements;Covers are Threaded;Mounting Straps are Standard on All Boxes (2)
  • Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection. Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate cutting with less force. Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required. Flange Stop – eliminates over-drilling. Slug Ejector Spring – quick, easy slug removal Cuts round, burr-free holes (3)
  • Tapped molded opening, special application (4)
  • Tapswitch (5)
  • The Gangable Feature Allows the Option of Creating a Multiple Gang Box from a Single Gang Box by Simply Removing the Combo Head Screw Holding the Side with a #2 Bit and Connecting the two (or More) Boxes together Reusing the Screws (2)
  • The only newly manufactured and Listed replacements available (41)
  • Threaded Hubs (14)
  • Threaded;Grounding Screw;Water Tight (5)
  • Threaded;Grounding;Corrosion Resistant (2)
  • Three Piece (2)
  • Trust Ideal step drill bits for precise, repetitive drilling through the toughest materials including brass, carbon steel, cast iron, stainless-steel, and more; Self-starting point eliminates starter holes or punches; Double-fluted design for balanced cuts and cooler operation; Unique titanium coating extends drill life six times longer than other step drills (2)
  • UL current limiting (2)
  • Used with Type BR Loadcenters (7)
  • Weight 104 Lb per 100 (2)
  • Weight 120 Lb per 100 (2)
  • Weight 312 Lb per 100 (2)
  • Weight 84 Lb per 100 (3)
  • Width 1-5/8 In, Bolt Size 5/16 In (2)
  • With Bolt (5)
  • Show More...

• Knockout Size

  

  • 1 in (5)
  • 1/2 in (7)
  • 1/2 in (Bottom);1/2 in (Side) (5)
  • 1/2 in (Bottom);1/2 in (Side);1/2 in (End) (4)
  • 1/2 in (Bottom);2-1/32 in (Bottom);1/2 in (Side);2-1/32 in (End) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);1 in (Side) (3)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);1/2 to 3/4 in (Concentric Knockout Side) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);3/4 in (Side) (6)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);3/4 in (Side);1/2 in (End);3/4 in (End) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);3/4 in (Side) (2)
  • 1/2 in (Bottom);3/4 in (Side);3/4 in (End) (3)
  • 1/2 in (Side);1/2 in (End);3/4 in (Bottom);1/2 in (Bottom) (2)
  • 1/2 in;3/4 in (6)
  • 1/2 to 3/4 in (Concentric Knockout Side);1/2 to 3/4 in (Concentric Knockout End);1/2 to 3/4 in (Concentric Knockout Bottom) (2)
  • 1-1/2 in (Side);1-1/2 in (End);2-1/2 in (Bottom) (4)
  • 1-1/4 in (2)
  • 3/4 in (7)
  • 3/4 in (Side);3/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (4)
  • Show More...

• Thickness

  

  • 0.03 in;0.75 mm (2)
  • 0.043 in;1.09 mm (2)
  • 0.045 in;1.13 mm (4)
  • 0.05 in;1.2 mm (3)
  • 0.05 in;1.31 mm (4)
  • 0.053 in;1.35 mm (6)
  • 0.055 in;1.4 mm (2)
  • 0.06 in;1.6 mm (2)
  • 0.06 in;1.65 mm (3)
  • 0.07 (2)
  • 0.075 in;1.91 mm (4)
  • 0.08 in (5)
  • 0.1 (3)
  • 0.125 in (2)
  • 1.13 in (2)
  • 1/4 INCH (2)
  • Show More...

• Number Of Hubs

  

  • 1 (2)
  • 2 (71)
  • 3 (30)
  • 3 IN (4)
  • 4 (13)
  • 5 (2)
  • Show More...

• Angle

  

  • 180 Deg (4)
  • 90 ° (32)
  • Show More...

• Tensile Strength

  

  • 120 lb/530 N (6)
  • 120 lb/534 N (4)
  • 18 lb/80 N (4)
  • 30 lb/135 N (5)
  • 40 lb/178 N (5)
  • 50 lb/220 N (6)
  • 50 lb/222 N (4)
  • Show More...

• Frequency Rating

  

  • 50 to 60 Hz (22)
  • 50/60 (73)
  • 50/60 Hz (14)
  • 50-60 (4)
  • 50to60 (2)
  • 60 (31)
  • 60 Hertz (2)
  • 60 Hz (13)
  • 600 MHz (3)
  • Show More...

• Load Rating

  

  • 1 (41)
  • HACR (15)
  • HACR / SWD (3)
  • Show More...

• Size

  

  • 0.75 (2)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.690 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.820 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1 (17)
  • 1 in (11)
  • 1 In (EMT), 3/4 In (IMC/Rigid) (2)
  • 1 In (Rigid), 1-1/4 In (EMT) (2)
  • 1 In Conduit (2)
  • 1 INCH (10)
  • 1" (2)
  • 1.3 WIDTH X 1.24 DEPTH X 2.25 HEIGHT IN, 33.02 WIDTH X 31.49 DEPTH X 57.15 HEIGHT MM (4)
  • 1.8125 x 1.75 x 4.125 in;46 x 44.5 x 104.8 mm (3)
  • 1/2 (8)
  • 1/2 in (20)
  • 1/2 In (EMT) (3)
  • 1/2 In, 3/4 In Conduit (3)
  • 1/2 INCH (10)
  • 1/2" (2)
  • 1/2-13 x 2 (2)
  • 1/4 (6)
  • 10 (2)
  • 10x1 (3)
  • 1-1/2 (3)
  • 1-1/2 in (5)
  • 1-1/2 In Conduit (2)
  • 1-1/2 INCH (6)
  • 1-1/4 INCH (6)
  • 1-13/16 LENGTH X 1-5/16 WIDTH X 1-9/16 DEPTH IN, 4.6 LENGTH X 3.3 WIDTH X 4 DEPTH CM (2)
  • 1-3/8 DIAMETER X 4 HEIGHT IN, 3.5 DIAMETER X 10.2 HEIGHT MM (2)
  • 1-9/16 LENGTH X 1-9/16 WIDTH X 3 DEPTH IN, 4 LENGTH X 4 WIDTH X 7.6 DEPTH CM (2)
  • 1-9/16 LENGTH X 1-9/16 WIDTH X 5-1/2 DEPTH IN, 4 LENGTH X 4 WIDTH X 14 DEPTH CM (2)
  • 2 (6)
  • 2 in (5)
  • 2 In Conduit (2)
  • 2 In Width X 2-1/2 In Depth X 3 In Height (2)
  • 2 In Width X 3-1/2 In Depth X 3 In Height (4)
  • 2 INCH (7)
  • 2.04 Inch Height (2)
  • 2.25 Inch Diameter (2)
  • 2.75 HEIGHT X 1.75 WIDTH X 1.36 DEPTH IN, 69.85 HEIGHT X 44.45 WIDTH X 34.54 DEPTH MM (2)
  • 2.79 HEIGHT X 1.6 WIDTH X 1.19 DEPTH IN, 70.86 HEIGHT X 40.64 WIDTH X 30.22 DEPTH MM (7)
  • 2-1/2 Inch (6)
  • 3 (2)
  • 3 DIAMETER X 2-3/4 HEIGHT IN, 7.6 DIAMETER X 7 HEIGHT CM (3)
  • 3 INCH (6)
  • 3 Inches Height x 2 Inches Width x 2-1/2 inches depth (5)
  • 3 Inches Height x 2 Inches Width x 2-3/4 inches depth (2)
  • 3/4 (14)
  • 3/4 in (23)
  • 3/4 In (EMT), 1/2 In (IMC/Rigid) (6)
  • 3/4 INCH (10)
  • 3/4" (3)
  • 3/8 (3)
  • 3/8 in (3)
  • 3/8 In Conduit (3)
  • 3/8 In Diameter (2)
  • 3/8 INCH (4)
  • 3/8 x 2-3/4 (2)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 3-1/2 Inches Depth (2)
  • 4 (6)
  • 4 in (2)
  • 4 INCH (6)
  • 4 X 4 X 1.5 (3)
  • 4 X 4 X 2.125 (3)
  • 4.5L x 14.125W x 30H (2)
  • 4.60 in (117 mm) x 2.86 in (73 mm) (4)
  • 4.69 in (119 mm) x 2.94 in (75 mm) (14)
  • 4.69 x 2.94;119 x 75 (17)
  • 5 LENGTH X 3 WIDTH X 7-3/4 HEIGHT IN, 12.70 LENGTH X 7.62 WIDTH X 19.69 HEIGHT CM (2)
  • 5 x 3 x 7-3/4 in;12.70 x 7.62 x 19.69 cm (2)
  • 5/8 (2)
  • 5-1/2 LENGTH X 3-3/8 WIDTH X 9-3/8 IN, 13.97 LENGTH X 9.21 WIDTH X 23.81 HEIGHT CM (2)
  • 5-1/2 LENGTH X 4 WIDTH X 9-3/8 HEIGHT IN, 13.97 LENGTH X 10.16 WIDTH X 23.81 HEIGHT CM (2)
  • 7-1/4 HEIGHT X 5-1/4 WIDTH X 4-1/2 DEPTH IN, 18.4 HEIGHT X 13.3 WIDTH X 11.4 DEPTH CM (2)
  • 8 (5)
  • 9-1/4 Inch Length x 10 Inch Width x 5-3/4 Inch Height (6)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap (4)
  • Standard (2)
  • Show More...

• Includes

  

  • Built-In Roller (3)
  • Cover (26)
  • Cover and Gasket (4)
  • Cover;Nut;Sleeve (2)
  • Ground Screw (3)
  • Neoprene Bushing (12)
  • Non-Metallic Damper/Duct Connector (2)
  • Permanently Lubricated Plug-In Motor;Blower Wheel (3)
  • Stainless Steel Screw (18)
  • Show More...

• Additional Information

  

  • 1 PER BOX; CHUCK SIZE 3/8 INCH (2)
  • APPLICABLE STANDARD ANSI C-33.27; APPLICATION HAZARDOUS LOCATION, PULL/SPLICE BOX; COVER OPENING SIZE 3 INCH; O RING MATERIAL NEOPRENE (4)
  • APPLICABLE STANDARD ANSI C-33.27; APPLICATION HAZARDOUS LOCATION, PULL/SPLICE BOX; COVER OPENING SIZE 3-5/8 INCH; O RING MATERIAL NEOPRENE (2)
  • APPLICABLE STANDARD ANSI C-33.27; APPLICATION HAZARDOUS LOCATION, PULL/SPLICE BOX; COVER OPENING SIZE 5 INCH; O RING MATERIAL NEOPRENE (6)
  • APPLICABLE STANDARD NEC/CEC (12)
  • Constructional Feature Corrosion Resistant; Includes Coupling; Application Petrochemical, Water and Wastewater Treatment Facility, Transportation and Infrastructure, Food, Dairy and Beverage, Mining, Marine and Coastal Facility, Chemical Plants, Steel Mil (2)
  • Cutting Edge Material High Speed Steel (2)
  • Cutting Material Wood (4)
  • ROHS Compliant; Jacket Thickness 0.207 Inch; Application Broad Band Video, Gigabit Ethernet, Fast Internet (2)
  • Total Length of Thread to Vanish Point 0.7815 Inch; Effective Length 0.5337 Inch; Pitch Diameter 0.7584 Inch; Thread per Inch 14 (2)
  • Total Length of Thread to Vanish Point 0.9845 Inch; Effective Length 0.6828 Inch; Pitch Diameter 1.2136 Inch; Thread per Inch 11-1/2 (2)
  • Total Length of Thread to Vanish Point 1.6337 Inch; Effective Length 1.2 Inch; Pitch Diameter 3.3406 Inch; Thread per Inch 8 (2)
  • Total Length of Thread to Vanish Point 1.7337 Inch; Effective Length 1.3 Inch; Pitch Diameter 4.3344 Inch; Thread per Inch 8 (2)
  • Total Length of Thread to Vanish Point 1.84 Inch; Effective Length 1.4063 Inch; Pitch Diameter 5.3907 Inch; Thread per Inch 8 (2)
  • WITH NEOPRENE O-RING (18)
  • WITH SQUARE LOCKED DESIGN (4)
  • Show More...

• Package Quantity

  

  • 1 CA (7)
  • 1 CA;6 PK (2)
  • 1 ct (75)
  • 1 CT;10 PK (11)
  • 1 CT;100 PK (2)
  • 1 CT;12 PK (7)
  • 1 CT;2 Pk (9)
  • 1 CT;25 PK (5)
  • 1 CT;4 Pk (2)
  • 1 CT;48 PK (3)
  • 1 CT;5 PK (9)
  • 1 CT;50 Pk (3)
  • 1 CT;6 Pk (7)
  • 1 CT;70 PK (2)
  • 1 PK (7)
  • 1.0 (3)
  • 10 CT (27)
  • 10 CT;100 PK (8)
  • 10 CT;50 PK (5)
  • 10 PK (15)
  • 10 PK;1 CT (10)
  • 10 PK;2 CT (2)
  • 10 PK;50 PK (7)
  • 100 BX (2)
  • 100 CT (12)
  • 100 CT;500 PK (2)
  • 100 JR (15)
  • 100 PK (9)
  • 1000 PK;100 CT (5)
  • 10000 PK;100 CT (2)
  • 10000 PK;1000 CT (8)
  • 12 CA (2)
  • 12 PK/CT;100 PK (4)
  • 125 PK;25 CT (3)
  • 14 CT (3)
  • 1400 FT/PK (2)
  • 15 CT (6)
  • 15 PK;1 CT (2)
  • 2 CT (18)
  • 2 CT;10 PK (5)
  • 2 PK (2)
  • 2 PK;10 PK (2)
  • 20 CT (15)
  • 20 PK (6)
  • 200 PK;1 CT (2)
  • 2250 FT/PK (2)
  • 25 CT (10)
  • 25 CT;100 PK (7)
  • 25 CT;50 PK (9)
  • 25 PK (32)
  • 25 PK (Inner);100 PK (Outer) (2)
  • 25 PK;1 CT (2)
  • 250 PK;25 CT (2)
  • 25000 PK;100 CT (2)
  • 30 CT (8)
  • 3300 FT/PK (2)
  • 35 CT (3)
  • 3600 FT/PK (2)
  • 380 FT/PK (2)
  • 40 CT (2)
  • 4400 FT/PK (2)
  • 5 CT (26)
  • 5 CT;10 PK (7)
  • 5 CT;20 PK (4)
  • 5 CT;25 PK (11)
  • 5 PK (22)
  • 5 PK (Inner);25 PK (Outer) (2)
  • 5 PK;1 CT (4)
  • 5 PK;25 PK (6)
  • 50 CT (16)
  • 50 JR (3)
  • 50 PK (23)
  • 50 PK;1 CT (2)
  • 50 PK;10 CT (6)
  • 50 PK;5 CT (4)
  • 500 PK;50 CT (6)
  • 5000 PK;100 CT (7)
  • 5000 PK;1000 CT (2)
  • 570 FT/PK (2)
  • 6 CT (3)
  • 6 PK/CT;100 PK (17)
  • 6000 FT/PK (2)
  • 70 CT (2)
  • 70 PL (3)
  • 8 CT (4)
  • 880 FT/PK (2)
  • 930 FT/PK (2)
  • Show More...

• Connection Size

  

  • 1/2 in (2)
  • 3/8 in - 16 (2)
  • Show More...

• Enclosure Type

  

  • Class I Div 2, Class II Div 1 and 2, Class III (2)
  • Nema 3R (5)
  • Nema 4 (30)
  • NEMA 6 and 4X (4)
  • NEMA FB-1 (14)
  • Open with metal mounting plate (22)
  • Show More...

• Number Of Lamps

  

  • 1 (2)
  • 2 (5)
  • N/A (28)
  • Show More...

• Weight

  

  • 0.0006 lb (3)
  • 0.0025 lb (3)
  • 0.0037 lb (2)
  • 0.004 lb (3)
  • 0.005 lb (7)
  • 0.006 lb (2)
  • 0.008 lb/EA (2)
  • 0.01 lb (10)
  • 0.011 lb (2)
  • 0.014 lb/EA (2)
  • 0.02 lb (3)
  • 0.044 lb (2)
  • 0.12 lb/EA (2)
  • 0.2 lb (4)
  • 0.2 lb/EA (2)
  • 0.20 lb;0.09 kg (2)
  • 0.21 lb (2)
  • 0.25 lb (3)
  • 0.25 lb/EA (3)
  • 0.28 lb (2)
  • 0.28 lb/EA (2)
  • 0.29 lb (2)
  • 0.3 lb (3)
  • 0.3 lb/EA (5)
  • 0.30 lb (2)
  • 0.34 lb/EA (2)
  • 0.35 lb (2)
  • 0.38 lb (3)
  • 0.4 lb (2)
  • 0.4 lb/EA (6)
  • 0.44 lb (2)
  • 0.5 lb (2)
  • 0.5 lb;0.2 kg (4)
  • 0.50 lb (2)
  • 0.50 lb/EA (2)
  • 0.50 lb;0.23 kg (3)
  • 0.51 lb/EA (2)
  • 0.52 lb/EA (2)
  • 0.55 lb/EA (2)
  • 0.56 lb (4)
  • 0.57 lb (8)
  • 0.65 lb/EA (2)
  • 0.67 lb (3)
  • 0.6989 lb (2)
  • 0.79 lb/EA (2)
  • 0.86 lb (4)
  • 0.87 lb/EA (2)
  • 0.89 lb/EA (2)
  • 0.93 lb/EA (3)
  • 0.97 lb (2)
  • 0.99 lb/EA (2)
  • 1 lb (4)
  • 1 lb/EA (2)
  • 1.03 lb (2)
  • 1.05 lb (2)
  • 1.06 lb/EA (2)
  • 1.1 lb;0.5 kg (2)
  • 1.13 lb/EA (2)
  • 1.19 lb (8)
  • 1.2 lb (2)
  • 1.2 lb/EA (2)
  • 1.27 lb (2)
  • 1.3 lb/EA (2)
  • 1.5 lb;0.7 kg (2)
  • 1.65 lb/EA (2)
  • 1.71 lb/EA (3)
  • 1.8 lb/EA (2)
  • 1.85 lb/EA (2)
  • 10 lb (2)
  • 10 lb/100 (5)
  • 10.35 lb/EA (2)
  • 104 lb/100 (3)
  • 112.5 lb/100 (2)
  • 14 lb/100 (6)
  • 15 lb (3)
  • 155 lb/100 (2)
  • 2 lb (3)
  • 2 lb/EA (3)
  • 2.02 lb (2)
  • 2.2 lb (2)
  • 2.2 lb/EA (4)
  • 2.25 lb/EA (2)
  • 2.35 lb/EA (2)
  • 2.45 lb/EA (2)
  • 2.5 lb (3)
  • 2.52 lb/EA (2)
  • 2.6 lb/EA (3)
  • 2.7 lb/EA (3)
  • 2.75 lb (2)
  • 2.93 lb/EA (2)
  • 20 lb/100 (2)
  • 21 lb (2)
  • 21 lb/100 (2)
  • 23.5 lb/100 (2)
  • 25 LB PER 100 FT (2)
  • 25 lb/100 (2)
  • 28 lb (2)
  • 3.25 lb/EA (2)
  • 3.3 lb/EA (2)
  • 3.4 lb/EA (2)
  • 3.66 lb/EA (2)
  • 30 g (2)
  • 37.5 lb/100 (6)
  • 38.10 lb/100;84 kg/100 (2)
  • 39 lb/EA (2)
  • 4.45 lb/EA (2)
  • 4.53 lb/EA (2)
  • 4.6 lb/EA (3)
  • 48 lb (2)
  • 5 lb/EA (2)
  • 5.33 lb/EA (2)
  • 50 lb/100 (3)
  • 58 lb/100 (3)
  • 6.25 lb/EA (2)
  • 62.5 lb/100 (2)
  • 64 lb/100 (2)
  • 65 lb/100 (2)
  • 67 lb/100 (2)
  • 70 lb/100 (2)
  • 8.75 lb (2)
  • 8.86 lb/EA (2)
  • 84 lb/100 (7)
  • 87.5 lb/100 (2)
  • Show More...

• Thread Length

  

  • 0.51 in (2)
  • 0.64 in (4)
  • 0.78 in (3)
  • 0.84 in (3)
  • 0.87 in (2)
  • 1 (2)
  • 1.06 in (2)
  • 1/2 in (6)
  • 1-1/8 (2)
  • 1-1/8 in (2)
  • 1-5/8 (2)
  • 5/8 in (6)
  • 7/16 in (2)
  • Show More...

• Drive Size

  

  • 1/4 in;5/16 in (2)
  • 5/16 in;1/4 in (2)
  • Show More...

• Housing Material

  

  • Aluminum (3)
  • Glass Filled Nylon (2)
  • Glass-filled Nylon (3)
  • metal, plastic (2)
  • Polycarbonate (2)
  • Rugged 26 Gauge Galvanized Steel (6)
  • Show More...

• Jaw Width

  

  • 0.47 in;11.94 mm (2)
  • 0.5 in;12.7 mm (2)
  • Show More...

• Diameter

  

  • #10 AWG (7)
  • #6 AWG (4)
  • #8 AWG (5)
  • 0.975 in (5)
  • 1 in (2)
  • 1.01 in (2)
  • 1.220 in (5)
  • 1.46 in (3)
  • 1.5 in (2)
  • 1.58 in (2)
  • 1.58 INCH (2)
  • 1.89 INCH (2)
  • 1.96 INCH (2)
  • 1/2 (5)
  • 1/2 in (2)
  • 1/4 (6)
  • 1/4 in (8)
  • 1-1/8 in (4)
  • 1-11/16 in;42.9 mm (2)
  • 1-13/32 in (2)
  • 1-21/32 in;42.1 mm (2)
  • 1-3/8 in (4)
  • 1-3/8 in;34.9 mm (2)
  • 1-7/16 in (3)
  • 1-7/32 in (2)
  • 1-7/8 in;47.6 mm (3)
  • 2 in (3)
  • 2" (2)
  • 2.83 INCH (2)
  • 3.58 INCH (4)
  • 3/16 in (2)
  • 3/8 (6)
  • 3/8 in (5)
  • 3-1/4 in;82.6 mm (3)
  • 4 in (6)
  • 4 in;101.6 mm (2)
  • 4 INCH (2)
  • 4.33 INCH (2)
  • 5 in;129 mm (3)
  • 5.14 INCH (2)
  • 5.83 INCH (6)
  • 8 in;203 mm (3)
  • Show More...

• Shank Type

  

  • 7/16 IN Hex (3)
  • Hexagonal (6)
  • Show More...

• Sub Brand

  

  • 36.0000 IN X 24.0000 IN X 24.0000 IN (2)
  • 70 Albalite Lens (2)
  • ABB (42)
  • Ariadni (3)
  • Black Button(R) (3)
  • Bolted Framing (2)
  • CADDY (17)
  • Diva (9)
  • Eaton Lighting (2)
  • EGS (7)
  • Electronic Circuits (2)
  • Halo(TM) (4)
  • In-Sure(R) (7)
  • Maestro (2)
  • Neer(TM) (8)
  • Not Applicable (2)
  • Prevail Series (2)
  • Q Line (2)
  • Shureseal(TM) (11)
  • Snap2it(R) (5)
  • Steel City(R) (22)
  • Superstrut(R) (3)
  • System pro M compact (2)
  • Show More...

• Energy Star

  

  • N (27)
  • yes (3)
  • Show More...

• Poles

  

  • 1 (108)
  • 1 PH (7)
  • 125 (5)
  • 2 (91)
  • 2 A (2)
  • 3 (17)
  • 3 WTT (6)
  • 4 (3)
  • Four-pole (7)
  • Single-pole (13)
  • Three-pole (11)
  • TWIN (4)
  • Two-pole (26)
  • Show More...

• Trip Type

  

  • Common (3)
  • Common breaker trip (58)
  • LI (19)
  • Non-Interchangeable (3)
  • OUTSIDE CORNER FITTING, OUTSIDE CORNER FITTING TYPE; ABS PLASTIC MATERIAL; 1.5 INCH L X 0.91 INCH W X 0.6 INCH H SIZE; WHITE FINISH; PAN-WAY LD10 SERIES NON-METALLIC SURFACE RACEWAY USED ON; UL, CE APPROVAL; 10 STANDARD PACKAGE; PAN-WAY[R] BRAND (13)
  • Thermal (41)
  • Trip flag (7)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (26)
  • ADHESIVES (3)
  • ALL PLASTIBOND FITTINGS (37)
  • All Recessed Cans & Trims (10)
  • ANCHORS & ANCHOR KITS (21)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (48)
  • BITS, BLADES, AND HOLE SAWS (90)
  • BOX SUPPORT (12)
  • Breaker Enclosures with or without Breaker (2)
  • CABLE & PIPE TRANSITS (8)
  • CADDY (STRAPS ONLY) (14)
  • Commercial dimmers, motion sensors, & photo cells (16)
  • Conduit & Raceways - Pvc Conduit, Fittings, & Boxes (15)
  • CONDUIT HANGERS/STAND OFF STRAPS (13)
  • CONTROLLERS (5)
  • CORD CONNECTORS & CORD GRIPS (29)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (21)
  • Datacom Wiring Devices and Accessories (6)
  • DECORATIVE RESIDENTIAL (5)
  • DP CONTACTORS (22)
  • DRIVES (19)
  • ELECTRONIC BALLAST (2)
  • ELECTRONIC CABLE (10)
  • FANS & HEATERS (10)
  • FASTENERS (2)
  • FLEX & MC FITTINGS (29)
  • FLOOR BOXES (3)
  • FORM 5 CONDULETS, COVERS, & GASKETS (59)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (66)
  • FS BOXES AND COVERS (27)
  • Fuses & Fuse Accessories (51)
  • Generator Parts & Accessories (2)
  • GLASS FUSES (and ceramic) (3)
  • GRC Conduit (10)
  • HAND TOOLS (38)
  • HAZARDOUS LOCATION FITTINGS (2)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (49)
  • IDEC RELAYS.IDC (2)
  • IEC/FREEDOM CONTACTOR (4)
  • IMC Conduit (9)
  • LADDERS (6)
  • LED ARCHITECTURAL & SPECIFICATION LIGHTING (8)
  • LED FLOODLIGHTS, WALLPACKS, BOLLARDS & LANDSCAPE LIGHTING (12)
  • LED PLUG-IN (REPLACMENT FOR CFL BIAX LAMPS) (38)
  • LED TRACK, RAIL, TASK & UNDERCABINET LIGHTING (2)
  • Liquid Tight (17)
  • Loadcenter Plug In Breakers and Accessories (312)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (29)
  • METAL HALIDE (2)
  • METALLIC FITTINGS (39)
  • Meter Sockets (6)
  • MISC FITTINGS (5)
  • MISC HUMAN INTERFACE (7)
  • Miscellaneous residential devices (4)
  • NEMA RATED TURNLOK PLUGS, CONNECTORS, & RECEPTICLES (4)
  • NON METALLIC JUNCTION BOXES (4)
  • NON-METALLIC FITTINGS (17)
  • OCTAGON BOXES (11)
  • Outdoor HID Lighting (4)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (6)
  • PANELBOARD BOXES & INTERIORS (2)
  • PLASTIC BOXES (17)
  • Portable Cords, Voice, Data, Video Wire & Cable (7)
  • POWER TOOL ACCESSORIES (4)
  • POWER TOOLS (14)
  • PVC CONDULETS (10)
  • PVC ELBOWS (42)
  • PVC Schedule 40 Conduit (11)
  • PVC Schedule 80 Conduit (10)
  • PVC SPACERS (4)
  • PVC STRAPS (2)
  • Residential cord connectors (3)
  • Residential dimmers, motion sensors, controls, & photo cells (76)
  • Residential plates (7)
  • Residential Switches (3)
  • RIGID COUPLINGS (12)
  • RIGID STRAPS & CLAMPBACKS (7)
  • ROMEX CONNECTORS (4)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (111)
  • SENSORS (4)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (21)
  • SPLICE KITS (3)
  • SPRING NUTS & TWIRL NUTS (4)
  • STEEL BOXES & COVERS (85)
  • STEEL EMT FITTINGS (12)
  • STRUT CHANNEL (10)
  • STRUT STRAPS (2)
  • SURGE SUPRESSION PRODUCTS (6)
  • SWITCH BOXES (11)
  • TERMINAL BLOCKS POWER DIST BLOCKS (3)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (6)
  • TIME CLOCKS (35)
  • TRANSFORMER ACCESSORIES (2)
  • Under Counter Fixtures (2)
  • UPS UNITS (2)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (21)
  • WEATHERPROOF BOXES & COVERS (19)
  • WIRE DUCT AND COVERS (7)
  • WIRE LUBE, MARKERS, & TIES (2)
  • WIRE NUTS (10)
  • Show More...

• Minimum Qty

  

  • 10 (46)
  • 100 (81)
  • 1000 (2)
  • 150 (2)
  • 20 (6)
  • 30 (2)
  • 5 (2)
  • 50 (21)
  • 500 (3)
  • Show More...

• Operating Temperature

  

  • +32 to +122 DEG F, 0 to +50 DEG C (7)
  • -20 to +104 DEG F, -29 to +40 DEG C (3)
  • -25 to +55 Degrees Celcius (13)
  • 32 to 104 (19)
  • 32 to 104 °F (0 to 40 °C) (2)
  • 32 to 104 F (0 to 40 C) (17)
  • 40 (41)
  • -40 to +104 DEG F, -40 to +40 DEG C (6)
  • -40 to +130 DEG F, -40 to +54 DEG C (17)
  • -40 to +155 DEG F, -40 to +68 DEG C (5)
  • -40 to +158 DEG F -40 to +70 DEG C (15)
  • Show More...

• Construction

  

  • Canless,New Construction,Remodel (2)
  • Drawn (35)
  • Explosionproof, Dust-Ignitionproof, Raintight (25)
  • Heavy-Duty Die-Cast Aluminum (3)
  • Heavy-Duty Polycarbonate (6)
  • N/A (3)
  • Nonmetallic (3)
  • ONE PIECE (17)
  • Patented reinforcing edge minimizes stress breakage (5)
  • Plastic (2)
  • Rugged Steel (2)
  • TWO PIECE (5)
  • Welded (50)
  • Show More...

• Knockouts

  

  • (1) 1/2 in_(1) 1/2 in (6)
  • 0 (7)
  • 11 (2)
  • 12 (2)
  • 13 (5)
  • 16 (4)
  • 17 (3)
  • 20 (2)
  • 22 (2)
  • 24 (2)
  • 26 (2)
  • FALSE (43)
  • true (78)
  • Yes (2)
  • Show More...

• Hub Location

  

  • (1) Side;(1) Down (5)
  • (2) Side (9)
  • (3) Side (6)
  • (4) Side (5)
  • 90 Degree (2)
  • 90º (32)
  • Cross (5)
  • End (3)
  • Side (12)
  • Straight (11)
  • TEE (2)
  • Tee Side (19)
  • Show More...

• Mounting

  

  • 1/2 In S Bracket (3)
  • 1/2 In Setback VP Bracket (2)
  • 16 TO 24 INCH ADJUSTABLE BAR HANGER (2)
  • 5/8 In Setback S Bracket (2)
  • Adhesive Tape (6)
  • Bracket Mount (2)
  • Button Fixed Mount (3)
  • C BRACKET (2)
  • CEILING (2)
  • CHANNEL (15)
  • Combination Mount (2)
  • Conduit (18)
  • EAR (6)
  • FLUSH (13)
  • HORIZONTAL/VERTICAL (2)
  • Horizontal;Vertical (3)
  • IEEE 386,IEEE 386,Not Applicable,Sans objet (2)
  • LUG (18)
  • PAD (8)
  • Plug-on (2)
  • Push In (3)
  • Recessed (9)
  • Stem and Swivel Fixed Mount (6)
  • Stem Fixed Mount (2)
  • Stem Mount (3)
  • Surface Mount (5)
  • Twistlock Mount (3)
  • Under Cabinet (2)
  • VERTICAL (5)
  • VMS Bracket (2)
  • WALL MOUNT (40)
  • WALLBOX (38)
  • Show More...

• Type

  

  • 1-Hole Aluminum Strap (6)
  • 4" 4000 Trim (3)
  • 6" H7 Trim (3)
  • Accessory (4)
  • ACCESSORY POST (2)
  • Adjustable frequency drive (19)
  • Adjustable plaster ring (3)
  • AFCI circuit breakers (3)
  • Anchor (6)
  • Arc Fault / Ground Fault Circuit Breakers (2)
  • Astronomic Electronic (2)
  • Box mounting bracket and accessories (2)
  • BUSHING (15)
  • Cable gland (5)
  • Cable Tie Mount (6)
  • Cable To Beam Fastener (2)
  • Carbide-Tipped Hole Cutter (3)
  • CEILING (2)
  • Ceiling Boxes (2)
  • Ceiling, 1-Speed (3)
  • Circuit Breaker Enclosure (3)
  • Clamp Back (5)
  • Clamps and Clips (5)
  • Commercial Spring Wound Auto-Off (2)
  • Compression Connector (11)
  • Conduit and Box Support Fastener (4)
  • Conduit and cable clamp (9)
  • Conduit Body (32)
  • Conduit Body Rigid Threaded (6)
  • Conduit Clamps & Support Straps (2)
  • Conduit fastener (2)
  • Conduit Hangers (5)
  • Conduit outlet body (82)
  • Conduit outlet box with cover (26)
  • Conduit Strut Clamp (12)
  • Conduit to beam fastener (19)
  • CONNECTOR (8)
  • Connectors-45 Degree (14)
  • Connectors-90 Degree (21)
  • Connectors-Straight (22)
  • Cord grip (12)
  • COUPLING (3)
  • COVER (3)
  • Decorator Digital In-Wall (2)
  • Decorator dimmer (3)
  • Decorator Spring Wound Auto-Off (6)
  • Definite purpose contactor (22)
  • Demolition (2)
  • DEVICE BOX (4)
  • Digital In-Wall 7-Day Astronomic (2)
  • Dimmer switch (3)
  • Dimmer with on/off switch, 3-way/single-pole, clamshell packaging (2)
  • Dimmer, 3-way (3)
  • Dimmer, 3-way, clamshell packaging (3)
  • Dimmer, 3-way/single-pole (6)
  • Dimmer, 3-way/single-pole, clamshell packaging (3)
  • Dimmer, reverse-phase, 3-way/single-pole (2)
  • Dimmer, single-pole (5)
  • Dimmer, single-pole, clamshell packaging (4)
  • Drop in Anchor (3)
  • Electromechanical (13)
  • ELECTRONIC (3)
  • Electronic, Fast Acting (2)
  • Enclosed circuit breaker (8)
  • ENT Flexible Raceway (2)
  • EXTRA FLEXIBLE (2)
  • Fan speed controller (4)
  • FD Deep Depth 1-Gang Cast Device Box (3)
  • FDC Deep Depth 1-Gang Cast Device Box (3)
  • FDCT Deep Depth 1-Gang Cast Device Box (2)
  • FDT Deep Depth 1-Gang Cast Device Box (2)
  • FDX Deep Depth 1-Gang Cast Device Box (2)
  • FEMALE/FEMALE (6)
  • FENDER WASHER (3)
  • Fixture Accents/Parts (2)
  • FLOODLIGHT (3)
  • Flush Service (2)
  • Folding Set (3)
  • FS Shallow Depth 1-Gang Cast Device Box (4)
  • FS Shallow Depth 2-Gang Cast Device Box (2)
  • FSC Shallow Depth 1-Gang Cast Device Box (3)
  • Full Thread Wedge Anchor (6)
  • Gang box (9)
  • Gang Boxes (4)
  • GROUND CLAMP (3)
  • Ground Hub Swing Type (3)
  • Hammer Drill Bit (3)
  • Hanger (4)
  • HEAVY DUTY (4)
  • Heavy Duty Bronze Ground Clamps (4)
  • Heavy Duty Direct Burial Lay-In Lug (5)
  • Heavy Duty Ground Connector For Parrallel Copper Cables (2)
  • Heavy Duty In-Wall (2)
  • Hex Bolt (9)
  • HIGH PERFORMANCE (16)
  • High Performance MCB Provides Compact Supplementary, Energy Limiting, Circuit Protection (9)
  • High Performance MCB, Branch Circuit Protection (3)
  • House panel (3)
  • HUB (12)
  • Hub Connector (9)
  • Insulated Grounding Bushing With Aluminum Lay-In-Lug (3)
  • Intergrated Mounting Hole (2)
  • INTERMEDIATE (4)
  • Intermediate Spacer (4)
  • JACK MODULE (4)
  • JUNCTION BOX (3)
  • LA (4)
  • LFMC (3)
  • Light Junction Box (2)
  • Liquid Tight Flexible Metallic Conduit (4)
  • Liquid-tight flexible non- metallic conduit (2)
  • Long Ship (2)
  • MACHINE SCREW (13)
  • Machine Screw Kit (2)
  • MAGNETIC (3)
  • Main lug loadcenter (2)
  • MALE/FEMALE (6)
  • Masonry Box (10)
  • Masonry Boxes (8)
  • MECHANICAL (3)
  • Metal Channels (6)
  • Meter Breaker EUSERC (4)
  • MINIATURE (2)
  • Miniature circuit breakers (2)
  • Mogul conduit body (4)
  • Molded case circuit breaker accessory (2)
  • MOUNTING BRACKET (2)
  • Natural (3)
  • Non-Plenum (2)
  • Nut (2)
  • nVent CADDY All-in-One Stud-Mounted Assemblies (2)
  • Occupancy sensor switch (2)
  • Octagon outlet box (13)
  • Octagonal Box (4)
  • Octogonal Boxes (3)
  • Operator interface (2)
  • OUTLET BOX (15)
  • Outlet Box Covers (2)
  • Outlet Boxes (10)
  • Patch Cord (4)
  • Pipe Hanger (3)
  • PLUG (4)
  • Plug on module surge protection device (3)
  • Post base (2)
  • Preset dimmer, 3-way (2)
  • Push In Clamps (5)
  • Push-In (10)
  • Push-In Connector (20)
  • PVC - Sch 40/80 (12)
  • Q-Line Plug-In (2)
  • Raceway Base, Raceway Cover (3)
  • Raceway Device Box (3)
  • Recessed Service (2)
  • Reducing Washer (2)
  • Rigid Non-Metallic FS & FD Boxes & Covers (2)
  • Ringless Meter Socket (2)
  • RL4 LED (2)
  • RL56 LED (2)
  • Rod Coupling (4)
  • Rod to beam hanger (2)
  • Rod/Wire (4)
  • Safety Transformer (2)
  • Self Drill (9)
  • SHIP (7)
  • Side Cutting Pliers (2)
  • SLIDE DIMMER (2)
  • Snap Close Clamps (2)
  • Square Box (3)
  • Square outlet box (26)
  • Square washer (2)
  • Squeeze Connectors (3)
  • Stainless Steel LINE TERMINATION HUB (2)
  • Stem and Swivel Style Photocell (2)
  • Step Drill Bit (2)
  • Straight reducer (5)
  • Strut (2)
  • STUBBY (7)
  • Switch box (11)
  • Switch Boxes (7)
  • T IA (3)
  • Telescoping Box Mounting Bracket (2)
  • Terminal Block (3)
  • Thermal magnetic circuit breakers (108)
  • Thermal Type Photo Cell (9)
  • THREADED FEMALE (12)
  • Threaded Products & Hardware (Series 100) (3)
  • Three Piece Coupling (2)
  • Toggle Bolt (2)
  • Toggle Dimmer (2)
  • Tongue & Groove, Pump Plier, Water Plier, Tools (5)
  • TwistLock Photocell (4)
  • Type ABB Insulating Bushing (2)
  • Type CH 3/4-inch Standard Circuit Breaker (3)
  • Type I or II (2)
  • Type IA (2)
  • UBIF TYPE NA THICK REPLACEMENT (2)
  • UBIF TYPE NC THICK REPLACEMENT (8)
  • UBIF TYPE NC THIN REPLACEMENT (8)
  • UBIP TYPE P REPLACEMENT (8)
  • UBIP TYPE P TWIN REPLACEMENT (2)
  • UBIZ TYPE QC THICK REPLACEMENT (4)
  • UBIZ TYPE R TWIN REPLACEMENT (2)
  • UBIZ TYPE RC THIN REPLACEMENT (6)
  • U-Bolt (4)
  • Undercabinet (3)
  • UPS (7)
  • USS Flat Washer (2)
  • UTILITY BOX (2)
  • UV Resistant Black (4)
  • Wall Plate (2)
  • Wallpack (2)
  • WASHER (6)
  • Watertight Hubs (6)
  • Weatherproof (2)
  • Weatherproof Receptacle Cover (9)
  • Show More...

• Depth

  

  • 1.16 (3)
  • 1/2 (6)
  • 1;25.4 (3)
  • 1-1/2 (18)
  • 1-1/8 (4)
  • 12-13/16 INCH (2)
  • 1-5/8 (6)
  • 2.19 INCH (INSIDE) (3)
  • 2.32 (4)
  • 2-1/2 (8)
  • 2-1/2 INCH (2)
  • 2-1/8 (26)
  • 2-3/4 (2)
  • 2-3/4 INCH (INSIDE) (2)
  • 3.125 (3)
  • 3.35 (12)
  • 3.97 (4)
  • 3/4 (8)
  • 3-1/2 (5)
  • 3-3/4 INCH (INSIDE) (3)
  • 4 INCH (INSIDE) (3)
  • 6 (2)
  • 8-1/4 INCH (2)
  • Show More...

• Wattage

  

  • <0.5 W @ 277 VAC (3)
  • >2 W (2)
  • 1000 (4)
  • 150 (3)
  • 1875 (2)
  • 2/8W (2)
  • 250/500 (2)
  • 3 (16)
  • 300 W (LED, CFL), 600 W (INC/HAL, ELV, MLV) (2)
  • 5540 (3)
  • 6 (2)
  • 600 (31)
  • 600 A (2)
  • 8 (6)
  • 8.5 (7)
  • 9 (13)
  • 900 W (2)
  • N/A (2)
  • Single-pole (2)
  • Show More...

• Thread Size

  

  • #6-32 (4)
  • #8-32 (3)
  • 1 in (3)
  • 1 in NPT (5)
  • 1/2 in (10)
  • 1/2 in - 13 (3)
  • 1/2 in NPT (6)
  • 1/2-13 (5)
  • 1/4 in - 20 (13)
  • 1-1/2 in NPT (5)
  • 1-1/4 in NPT (4)
  • 2 in NPT (6)
  • 2-1/2 in NPT (3)
  • 3 in NPT (3)
  • 3/4 in (10)
  • 3/4 in NPT (7)
  • 3/8 - 16 (2)
  • 3/8 in - 16 (6)
  • 3/8 in NPT (3)
  • 3/8-16 (3)
  • 4 in NPT (2)
  • Show More...