Narrow By:

• Manufacturer: Klein

• Product Type

  

  • #0 PH Mini Screwdriver 3" Shank (1)
  • #2 PH Screw Holding Screwdriver (1)
  • #2 Phillips Screwdriver Rapi-Driv® (1)
  • 1/16" Keystone Mini Screwdriver 2" (1)
  • 1/2" Nut Driver 6" Hollow Shaft (1)
  • 1/4" Magnetic Nut Driver 3" Shaft (1)
  • 1/4" Magnetic Nut Driver 6" Shaft (1)
  • 1/4" Nut Driver 3" Shaft Cushioned (1)
  • 1/4" SL Power Drivers 1" Bit PK 5 (1)
  • 1/4" SL Power Drivers 3-1/2" PK 5 (1)
  • 1/8" Cab Tip Mini Screwdriver 6" (1)
  • 1/8" Cab Tip Mini Screwdriver 8" (1)
  • 10 Pocket Tool Pouch Knife Snap (1)
  • 10" Adj. Wrench Extra-Capacity (1)
  • 100' Grooved Fiberglass Fish Tape (1)
  • 100' MG FBG Fish Tape W/ Leader (1)
  • 11-In-1 Impact Rated Driver (1)
  • 11-In-1 Ratcheting Impact Driver (1)
  • 12 Pocket Tote W/Shoulder Strap (1)
  • 12" Adj. Wrench Extra Capacity (1)
  • 12" Bi-Metal Blades, 100-PK (1)
  • 12" Bi-Metal Blades, 10-PK (1)
  • 24" (610 MM) Canvas Tool Bag (1)
  • 240' Stainless Steel Fish Tape (1)
  • 27-In-1 Precision Screwdriver (1)
  • 2-In-1 Nut Driver, 3" Slide Driver (1)
  • 2-In-1 Nut Driver, Hex, 1/4", 5/16" (1)
  • 3/16" Cabinet Tip Screwdriver 3" (1)
  • 3/16" Cabinet Tip Screwdriver 8" (1)
  • 3/16" Nut Driver 3" Hollow Shaft (1)
  • 3/16" Screw Holding Screwdriver 3" (1)
  • 3/16" SL Drivers 3-1/2" Bit PK 5 (1)
  • 3/16" SL Power Drivers 1", PK 5 (1)
  • 3/32" Slotted Precision Screwdriver (1)
  • 3/8" Drive Socket Wrench Set, 20 PC (1)
  • 3/8" Magnetic Nut Driver 3" Shaft (1)
  • 3/8" Nut Driver 3"Hollow Shaft (1)
  • 30' Double Hook Tape Measure (2)
  • 32" Standard Cable Cutter (1)
  • 3-In-1 Impact Flip Socket (2)
  • 3-In-1 Impact Flip Socket Set, 2 PC (1)
  • 400 LM Rechargeable Auto-Off Headlamp (1)
  • 5 Pocket Tool Pouch Canvas (1)
  • 5/16" Magnetic Nut Driver (1)
  • 5/16" Nut Driver 6" Hollow Shaft (1)
  • 5/8" Nut Driver 4"Hollow Shaft (1)
  • 6" (152 MM) Pump Pliers (1)
  • 7/16" Magnetic Nut Driver 6" Shaft (1)
  • 7/16" Nut Driver 6" Hollow Shaft (1)
  • 7/16" Power Nut Driver 5" Length (1)
  • 7-Pocket Tool Pouch (1)
  • 8 Pocket Tool Pouch Slotted (1)
  • 8-In-1 Slide Driver Screw/Nutdriver (1)
  • 9" Pliers, Side Cut, Tape Pull (1)
  • 9/16" Nut Driver 6" Hollow Shaft (1)
  • Ac/DC Digital Clamp Meter, 400a (1)
  • Accu-Bend(TM) Conduit and Pipe (2)
  • Adj. Length Blade, SQ #1, #2 (1)
  • Adj. Wrench Extra Capacity 8-1/4" (1)
  • Adjustable Wrench (3)
  • Aerial Oval Bucket 15 Pocket, Hooks (1)
  • Afci /Gfci Outlet Tester (1)
  • Apprentice Tool Set, 6 PC (1)
  • Assembled Conduit Bender (3)
  • Aviation Snips W/Wire Cutter (1)
  • Backpack Cooler (1)
  • Black Light Lockback Knife 2-1/4" (1)
  • Black Nylon Zipper Bag (1)
  • Blades For Large Cable Strippers (1)
  • Cabinet Tip Mini Screwdriver (2)
  • Cabinet Tip Screwdriver (4)
  • Cable Cutter (2)
  • Cable Splicer Knife Holder Tunnel (1)
  • Camouflage Zipper Bag (1)
  • Can Wrench, 3/8" and 7/16" Hex Nut (1)
  • Canvas Bag (2)
  • Canvas Zipper Bag (3)
  • Canvas Zipper Bag, Consumables, BL (1)
  • Cap Visor Light (1)
  • Circuit Breaker Finder Accy Kit (1)
  • Clamp Meter Electrical Test Kit (1)
  • Classic Klaw Pump Piler (2)
  • Classic Klaw Pump Plier (2)
  • Coated Socket Set, 12-Point, 6 PC (1)
  • Combination Square, 12" (1)
  • Combination Stripping and Cutting Tool (1)
  • Combo Knife and Scissors Sharpener (1)
  • Conduit And Pipe (2)
  • Conduit Bender (1)
  • Conduit Locknut and Reaming Pliers (1)
  • Conduit Locknut Wrench, 1/2", 3/4" (1)
  • Conduit Reamer (1)
  • Conduit Reamer Drill Head (1)
  • Crimping Tool (1)
  • Crimping/Cutting Tool (2)
  • Crimping/Cutting Tool For Terminals (1)
  • Cushion-Grip Scratch Awl (1)
  • Cushion-Grip Screwdriver Set (1)
  • Cut Resistant Glove (2)
  • Cutting Plier (2)
  • Diagonal Cutting Plier (5)
  • Diagonal Cutting Pliers Heavy Duty (1)
  • Digital Clamp Meter (3)
  • Digital Clamp Meter With Temp (1)
  • Digital Multimeter (1)
  • Digital Multimeter, Manual 600V (1)
  • Digital Multimeter, TRMS Auto 1000V (1)
  • Dual Range Non-Contact Volt Tester (1)
  • Dual-Laser Infrared Therm, 20:1 (1)
  • Dual-Wire Stripper/Cutter (1)
  • Eight-Key Inch Folding Hex Key Set (1)
  • Electrician Tool Set (1)
  • Electrician'S Pocket Knife (1)
  • Electrician's Scissor (2)
  • Electrician's Tool Belt (6)
  • Electricians Tool Set (1)
  • Electronic Ac/DC Voltage Tester (2)
  • Electronic Diagonal Cutting Pliers (1)
  • Electronics Screwdriver 4-In-1 (1)
  • Electronics Screwdriver Set (2)
  • Five-Key Inch Folding Hex Key Set (1)
  • Flex Bit Kit (1)
  • Flip Impact Socket Set, 7-Piece (1)
  • Flush Cutter, Lightweight, 5" (1)
  • Folding Hex Key Set (3)
  • Folding Utility Knife (2)
  • Gfci Receptacle Tester With LCD (1)
  • Hard Hat, Non-Vented Brim Style (1)
  • Hard Hat, Non-Vented Brim, Headlamp (1)
  • Hard Hat, Non-Vented Cap Style (1)
  • Hard Hat, Non-Vented Cap W/Headlamp (1)
  • Hard Hat, Vented Brim W/Headlamp (1)
  • Hard Hat, Vented Full Brim Style (1)
  • Heavy Duty Diagonal Cutting Pliers (1)
  • Heavy Duty Side Cutting Pliers (2)
  • High Dexterity Touchscreen Glove (2)
  • High Lev. Pliers, HD Side Cut, 9" (1)
  • High Leverage Cable Cutter (2)
  • High Tension Hacksaw (1)
  • High Visibility Backpack (1)
  • High-Leverage Cable Cutter (3)
  • Hole Cutter (2)
  • Hole Saw (1)
  • Idc Connector Crimping Pliers (1)
  • Insul Changeable Drivers W/ Pouch (1)
  • Iron Conduit Bender (2)
  • Iron Conduit Bender 1/2" Emt (1)
  • Iron Conduit Bender 3/4" Emt (1)
  • Jab Saw (1)
  • Journeyman Diagonal Cutting Pliers (1)
  • Journeyman Pump Pliers (1)
  • Keystone-Tip (3)
  • Klein-Kurve Wire Stripper, Cutter (1)
  • Klein-Kurve® Wire Stripper/Cutter (1)
  • Large Cable Stripper (750-350 MCM) (1)
  • Leather Glove (2)
  • Lockouts Interlock Tabs 1-1/2" Dia (1)
  • Long Nose Plier (2)
  • Long Nose Pliers Side Cutting (2)
  • Long Nose Side Cut Plier (2)
  • Long Nose Side Cut Pliers, 7-1/2" L (1)
  • Magnetic Hanger (2)
  • Master Electricians Hole Cutter Kit (1)
  • Mid-Flex Glow Rod Set (2)
  • Modbox™ 18 Pocket Tool Pouch (1)
  • Modbox™ 8 Pocket Tool Pouch (1)
  • Modbox™ 9 Pocket Tool, Parts Pouch (1)
  • Modbox™ Drill Pouch (1)
  • Modbox™ Open Tool Pouch (1)
  • Modbox™ Side Rail Case Adapter (1)
  • Modbox™ Tool Belt Pouch Clips, 3 PK (1)
  • Multi-Bit Screwdriver and Nut Driver (5)
  • Multi-Groove Fish Tape, 200 FT (1)
  • Multimeter, TRMS Auto, 600V, Temp (1)
  • Multi-Purpose Hybrid Pliers (1)
  • Nine-Key Inch Folding Hex Key Set (1)
  • Non-Contact Volt Tester/Thermometer (1)
  • Non-Contact Voltage Tester (3)
  • Non-Contact Voltage Tester 50-1000V (1)
  • Nut Driver (1)
  • Nut Driver Cushion-Grip (1)
  • Nut Driver Set (4)
  • Nut Driver Sets (2)
  • Phillips Screwdriver (3)
  • Phillips-Tip (3)
  • Phone Holder (3)
  • Phone Holder with Belt Clip (3)
  • Pocket Knife (2)
  • Pocket Knife 2-1/4" Coping Blade (1)
  • Pocket-Sized Knife Sharpener (1)
  • Pro Folding Hex Key Set (1)
  • Pump Plier (3)
  • Quick-Rotating (3)
  • Receptacle Tester (2)
  • Rechargeable Flashlight With Laser (1)
  • Rechargeable Light Array Headlamp (1)
  • Rechargeable Thermal Imaging Camera (1)
  • Replacement Bit (3)
  • Replacement Bits, Square, #1, #2 (1)
  • Replacement Blade (1)
  • Replacement Plier Handle (2)
  • Replacement Tap (1)
  • Replacement Tap For 625-32, 627-20 (1)
  • Reusable Cooler Ice Packs, 2-Pack (1)
  • Scissors and Knife Holder W/ Loop (1)
  • Scout® Pro 3 Tester Starter Kit (1)
  • Screwdriver (3)
  • Screwdriver And Nutdriver (2)
  • Screwdriver Set (2)
  • Screwdriver Set 3/16" SL #2 PH 2-PC (1)
  • Screwdriver, Insul, #3 PH, 7" L (1)
  • Screwdriver, Insulated 3/16" Cab 7" (1)
  • Screwdriver, Insulated, 1/4" Cab 4" (1)
  • Screwdriver/Nut Driver (2)
  • Self-Leveling Cross-Line Laser Level and Plumb Spot (1)
  • Serrated Duct Knife (1)
  • Side Cut Stripping Crimping Pliers (1)
  • Side Cutting Plier (1)
  • Side Cutting Pliers (1)
  • Slim Digital Multimeter, 600V, Temp (1)
  • Slotted Screw Holding Screwdriver (2)
  • Slotted Screw-Holding Screwdriver (3)
  • Soft Sided (2)
  • Spring-Assisted Open Pocket Knife (1)
  • Standard Pump Pliers (3)
  • Step Drill Bit (1)
  • Straight-Claw Hammer, 16 Oz, 13" (1)
  • Straight-Claw Hammer, 18 Oz, 15" (1)
  • Strap (1)
  • Tapping Tool (1)
  • Test Lead Set (1)
  • T-Handle Set With Stand (2)
  • Tool Kit (1)
  • Torpedo Level (1)
  • Tote (2)
  • Tradesman Pro Phone Holder XX-Large (1)
  • Tradesman Pro™ Lighted Tool Bag (1)
  • Tradesman Pro™ Tech Bag (1)
  • Tradesman Pro™ Work Light (1)
  • Triple Taps 6-32, 8-32, 10-32 (1)
  • Tube Cutter (1)
  • Utility Glove (4)
  • Utility Knife Blade (1)
  • Wire Crimper, Cutter, Stripper Tool (1)
  • Wire Pulling Glove (2)
  • Wire Stripper (2)
  • Wire Stripper and Cutter (2)
  • Wire Stripper With Glow Grips (1)
  • Wire Stripper/Cutter (3)
  • Wire Stripper/Wire Cutter (3)
  • Show More...

• Sub Brand

  

  • Journeyman (16)
  • KLEIN TOOLS (1)
  • Klein-Kurve® (2)
  • Tradesman Pro„ (7)
  • Tradesman Proâ„¢ (1)
  • Show More...

• Blade Material

  

  • — (1)
  • 420HC Stainless Steel (1)
  • 440A Stainless Steel (9)
  • AUS 8 Stainless Steel (5)
  • AUS 8 Stainless-Steel (1)
  • Bi-Metal (1)
  • Black Oxide Steel (1)
  • Canvas (1)
  • CARBON STEEL (2)
  • Chrome Vanadium Steel (1)
  • Drop Forged Hardened Tempered Alloy Steel (1)
  • Forged Steel (3)
  • Hardened Carbon Steel (1)
  • Hardened Steel (1)
  • Heavy Duty Steel (1)
  • Induction Hardened Steel (3)
  • Stainless Steel (5)
  • Steel (43)
  • Strong;Tough Tempered Steel (1)
  • Show More...

• For Use With

  

  • 10-in-1 Screwdriver Driver (32477);11-in-1 Screwdriver Driver (32500);10-Fold(TM) (2)
  • 10-in-1, 11-in-1 and 10-Fold™ (1)
  • 1-1/4" Bender Head (Cat. No. 56211) (1)
  • 11-in-1 and 11-in-1 Magnetic Multi-Bit Screwdriver / Nut Drivers (Cat. Nos. 32500, 32500-MAG) (1)
  • 3/4 (19.1 mm) and LargerOverall Length54 (137.2 cm) (1)
  • 31906 (1)
  • 32559 (Extended Reach) (1)
  • 4-in-1 Electronics Screwdriver (32581, 32585) (2)
  • 93116 (1)
  • All Klein Meter;Multimeter;Clamp Meter (1)
  • Any Clamp or Digital Multimeter that Measures Temperature (2)
  • Cable Skinning Utility Knife (44218) (1)
  • Cables;Cords;Circuit Breakers;Lighting Fixtures;Switches;Outlets;Wires (3)
  • Cat. No. 32751 and 32708 (1)
  • Cat. No. 56009, 56010 & 56014 (1)
  • Cat. Nos. 625-32, 626, 627-20 (1)
  • Cat. Nos. 626, 627-20 (1)
  • Clamp (3)
  • Click Lock™ Modular System (1)
  • Digital Circuit Breaker Finders Cat. Nos. ET300, ET310 (1)
  • Extended Reach (32559) (1)
  • Fish Tape (1)
  • Fit into Power Drill Chucks and Quick Release Adapters (1)
  • For 7 in (1)
  • For 8 to 9 in (1)
  • For use with Klein Tools MM300;MM400;MM600;MM700 Multimeters;CL600;CL700;CL800 Clamp Meters (1)
  • Heavy Duty (32557) and Ratcheting (32558) (1)
  • Impact Drivers (1)
  • iPhone 6 Plus, 7 Plus, 8 Plus, Samsung Galaxy® S7, S8, S8 Plus, S9, S9 Plus, Note® 7, Note® 8, Note® Edge, and Similar Sizes (1)
  • iPhone 6 Plus, 7 Plus, Samsung Galaxy Note® Edge, Note® 7, and similar sizes (2)
  • iPhone 6, 7, 7s, 8, X, Samsung Galaxy® S3, S4, S7, and similar sized phones (1)
  • iPhone 6, 7, 7s, 8, X;Samsung Galaxy(R) S3, S4, S7 (1)
  • Klein Cable-splicer's Knife (1)
  • Klein Electrician's Scissors and Cable-splicer's Knife (1)
  • Klein Tools Clamp Meters, Digital Multimeters, and other Test and Measurement Products (1)
  • Klein Tools Large Cable Strippers (Cat. Nos. 21050 and 21051) (1)
  • Klein Tools Meters or Any Brand of Multimeter or Clamp Meter Requiring Test Leads (1)
  • Meters;Testers;Infrared Guns;Borescopes and Tools;iPhone 4, 5 (1)
  • Meters;Testers;Infrared Guns;Borescopes and Tools;iPhone 6, 7, 7s, 8, X;Samsung Galaxy(R) S3, S4, S7 (1)
  • MM1000, MM1300, MM2000, MM2300 (1)
  • MODbox™ Rail System Components (1)
  • MODbox™ Tool and Part Pouches (1)
  • Modular Tool Belt and Wall Rack (4)
  • Smart Phones;Tablets;Computers;Other Audio Devices (1)
  • Standard and GFCI Receptacle (1)
  • Strips and Crimps Twisted Pair;Ethernet;RJ45 Voice and Data Cables (1)
  • Tool Belts (3)
  • Tool Belts up to 2.5" Wide and MODbox™ Rail System (6)
  • Voice, Data, Video, NM (Romex®) Nonmetallic Sheathed Cable (1)
  • Show More...

• Material

  

  • — (3)
  • 100% Polyester (1)
  • 1095 Steel (1)
  • 1680d (6)
  • 1680d Ballistic Nylon, 2520d Ballistic Nylon Bottom (1)
  • 1680d Ballistic Polyester, 2520d Ballistic Polyester Bottom (1)
  • 1680d Ballistic Weave (26)
  • 1680d Ballistic Weave Body (1)
  • 1680d Ballistic Weave Body; Hard Molded Polypropylene Bottom (7)
  • 1680d Ballistic Weave, Mesh Interior (1)
  • 35% PU Foam, 25% Nylon, 20% Neoprene, 15% Polyester, 5% Natural Rubber Latex (2)
  • 4140 Steel (2)
  • 440A Stainless Steel (2)
  • 45% Nylon, 35% EVA Foam, 15% Polyester, 5% Natural Rubber Latex (2)
  • 600D Ballistic Weave (1)
  • 600d Nylon (1)
  • 91% Polyester, 5% Thermoplastic Polyurethane, 4% Spandex (1)
  • 98% Polyester, 2% Spandex (1)
  • ABS (5)
  • ABS and Electrical Components (3)
  • ABS and Electronic Components (2)
  • ABS housing and electronic components (2)
  • ABS Plastic (1)
  • ABS Plastic (Case) (1)
  • ABS Plastic Housing and Electronic Components (1)
  • ABS, Electrical Components (3)
  • ABS, Polycarbonate (1)
  • ABS, Steel (1)
  • ABS/Electronics (5)
  • ABS/PC, Electronic Components (1)
  • ABS/PC; Silicone Weave in Nylon Elastic Fabric (1)
  • Adjustable web belt (1)
  • ALLOY STEEL (4)
  • Alloy Steel/Steel (3)
  • Aluminum (10)
  • Aluminum body, Powder Metal Blades (2)
  • Aluminum Body, Silicone Grip (2)
  • Aluminum Housing, Electronic Components (1)
  • Anodized Aluminum (3)
  • Anti-Slip Silicone Strap (1)
  • Ballistic Polyester and Leather (3)
  • Canvas (1)
  • Carbide (3)
  • Carbon Steel (2)
  • Carbon Steel Barrel (1)
  • Cast Alloy (1)
  • Cast Aluminum (1)
  • Cast Zinc Alloy (1)
  • Chrome Plated Carbon Steel (1)
  • CHROME VANADIUM STEEL (1)
  • Chrome-Vanadium Steel (1)
  • Cordura® (1)
  • Cordura® Ballistic Nylon (2)
  • Cordura® Camouflage (1)
  • Cordura® Fabric (1)
  • Denier Polyester (1)
  • Earcups: ABS + PC; Headband: POM + TPE (1)
  • FABRIC (6)
  • Fiberglass (13)
  • Forged Steel (6)
  • Glove: 90% Polyester, 10% Latex Liner: 92% Acrylic, 4% Polyester, 4% Latex Dip: 100% Latex (1)
  • Handle: Reinforced Nylon; Keys: Alloy Steel (1)
  • Hard Plastic (1)
  • Hardened Steel (6)
  • HDPE (1)
  • HEAT TREATED STEEL (1)
  • Heat-Treated Alloy Steel (1)
  • Heat-Treated Metal (1)
  • Heavy duty canvas (1)
  • Heavy-duty Anodized Aluminum (1)
  • High Impact Polypropylene (1)
  • High Speed Steel (10)
  • Housing: PVC; Clip: Ni-Plated Iron; Plug: Copper (1)
  • Induction Hardened Steel (15)
  • IRON (4)
  • Iron;Steel(Handle) (1)
  • LEATHER (14)
  • Magnesium Cast (1)
  • Neodymium Alloy (1)
  • Neoprene (1)
  • Neoprene Impregnated Nylon (1)
  • No. 10 Canvas (2)
  • No. 10 Canvas with Brass Zipper (1)
  • No. 4 Canvas with Leather Back (1)
  • NO. 6 CANVAS (1)
  • No. 8 Canvas (2)
  • Nylon (1)
  • PC & PC-ABS housing and electronic components (1)
  • PC/ABS (9)
  • PC/ABS Housing with Electronic Components (1)
  • PC/ABS; Silicone Rubber (1)
  • Plastic (5)
  • Plastic and Electronic Assemblies (2)
  • Plastic and Metal (1)
  • Plastic Case with Steel Blade (4)
  • Plastic Handle with Rubber Grips (1)
  • Plastic Housing, Electronic Compenents (1)
  • Plastic Housing, PCB with Electronic Components (2)
  • Plastic, Metal (1)
  • Plastic, Stainless Steel, Rare Earth Magnets (1)
  • Plastic/Electronics (3)
  • Polycarbonate (4)
  • Polyester (4)
  • Polyester, HPPE, Nitrile (4)
  • Polyethylene (1)
  • Polymer Body and Electronic Components (1)
  • Powder Metal (1)
  • PVC (1)
  • PVC Coated Polyester (1)
  • Robust Forged Steel (1)
  • S2 Steel (3)
  • Shell: 100% Dry Acrylic; Lining: 65% Polyolefin / 35% Polyester (1)
  • Spandex (1)
  • Stainless Steel (8)
  • Stainless Steel Barrel (3)
  • Stainless Steel Probe (1)
  • Stainless Steel, Aluminum, Neodymium Magnets (1)
  • Stainless steel/Nylon Resin (1)
  • Stainless Steel;Hard Plastic;Rubber (1)
  • Steel (152)
  • Steel (Blade) (2)
  • Steel Alloy (1)
  • Steel and Fiberglass (1)
  • Steel Barrel (1)
  • Steel Bits (2)
  • Steel, Nylon, ABS Plastic (1)
  • Steel, Plastic (3)
  • Synthetic Leather (7)
  • Tempered Steel (1)
  • Thermocouple Wire with PVC Connector (1)
  • Thermoplastic; Electronics (1)
  • TOP GRAIN LEATHER (1)
  • TPE (Thermo Plastic Elastomer) (1)
  • TPE 40%, Neoprene 20%, EVA Foam 20%, Polyester 15%, Nylon 5% (1)
  • TPU and 1680d (1)
  • Show More...

• Cutting Capacity

  

  • #14 to #10 AWG (Solid);#16 to #12 AWG (Strand) (1)
  • #19 to #23 AWG (2)
  • 1 in (1)
  • 1" (2.5 cm) O.D. Multilayer Plastic Tubing and Up To 3/4" (1.9 cm) Schedule 40 PVC (1)
  • 1/8 in to 1-3/8 in;3.2 to 34.9 mm (Steel and Copper Tubing) (1)
  • 1/8" to 5/8" (0.3 to 1.6 cm) (1)
  • 10 Solid or 12 Stranded (1)
  • 10-18 AWG Stranded (1)
  • 10-22 AWG Insulated and Non-Insulated Terminals (2)
  • 10-22 AWG Non-Insulated Terminals (1)
  • 1-1/2 in;38 mm (1)
  • 1-3/16 in (1)
  • 1-3/8 in (1)
  • 1-3/8 in;34.9 mm (1)
  • 1-3/8 in;34.9 mm (Diameter) (1)
  • 1-3/8 in;35 mm (1)
  • 1-5/16 in;33.3 mm (1)
  • 18 gauge Steel and 22 gauge Stainless Steel (1)
  • 2-1/8 in;54 mm (2)
  • 3/4 in (2)
  • 3/8 in (Flexible Conduit);#10;#12;#14 (Armored Cable) (1)
  • 4/0 (Aluminum);2/0 (Soft Copper);24 AWG (100-Pair Communications Cable) (1)
  • 4/0 Aluminum, 2/0 Soft Copper, 100-Pair 24 AWG Communications Cable (2)
  • 4/0 Aluminum;2/0 Soft Copper;100-Pair 24 AWG Communications Cable (1)
  • 5/16 in;23.8 mm (1)
  • 6 in (Pipe) (1)
  • 8-18 AWG Solid; 10-20 AWG Stranded (1)
  • Copper:600 MCM;300 sq.mm;Aluminum:750 MCM;380 sq.mm;Communication Cable:1-1/8 in;28.6 mm (1)
  • Up to 1/0 AWG Aluminum and Copper (1)
  • Show More...

• Application

  

  • #8 AWG Copper, Aluminum and Other Soft Metals (1)
  • #8 AWG Copper, Aluminum and Other Soft Metals and Crimps Non-insulated Connectors, Lugs, and Terminals (1)
  • #8 AWG Copper, Aluminum and Other Soft Metals, 1/8" or 1/4" (3.2 or 6.4 mm) Flat Steel Fish Tape (1)
  • 10 - 20 AWG, 12 - 22 AWG (1)
  • 10 Piece Sae Ball-End Journeyman T-Handle Set With Stand (1)
  • 10-12 Solid and 12-14 Stranded Wire;Noninsulated Connectors;Lugs and Terminals (1)
  • 10-in-1, 11-in-1 and 10-Fold™ Screwdriver/Nut Drivers (2)
  • 16 AWG (1)
  • 5/8" (15.9 mm) Pole Line and Hardware Bolts, Threaded Rods (1)
  • 8-16 AWG Solid and 10-18 AWG Stranded Wire (2)
  • Accurate Targeting and Temperature Measurement (1)
  • ACSR, Screws, Nails, Most Hardened Wire (11)
  • ACSR, Screws, Nails, Most Hardened Wire; Crimps Noninsulated Connectors, Lugs and Terminals (1)
  • ACSR, Screws, Nails, Most Hardened Wire; Crimps Noninsulated Connectors, Lugs and Terminals; Pulls Steel Fish Tape (1)
  • ACSR, Screws, Nails, Most Hardened Wire; Pulls 1/8" or 1/4" (3.2 or 6.4 mm) Flat Steel Fish Tape (1)
  • All Purpose (2)
  • Alternative 45 Degree Mounting for Flush Cutting (1)
  • Aluminum;Brass;Copper;Plastic and Up to 10 Gauge Metal (1)
  • Ambient and Direct-Contact Temperature Readings (1)
  • Bending Conduit (3)
  • Bolt Applications (14)
  • Burr-Free PVC Cutting (1)
  • Cable Connection (1)
  • Cable Cutting in Confined Spaces (1)
  • Cable Cutting, Stripping, Deburring (1)
  • Cable Stripping (2)
  • Cable Termination (1)
  • Cable Testing (1)
  • Calibrated for Drywall, Masonry, Hardwood, Softwood Only (1)
  • Carbon Monoxide Detector (1)
  • Check for and find the true vertical and horizontal (1)
  • Check for and find the true vertical and horizontal; Transfer angles between surfaces with adjustable vial (1)
  • Class C (3)
  • Class E (5)
  • Coats Better and is 30% More Slippery Than Gel or Wax Lubricants (1)
  • Conduit and Pipe (2)
  • Conduit Bending (1)
  • Construction Sites, Factories, Airport Grounds, Hunting, Distribution Warehouses, Arborist, Racing, Range Instructors (1)
  • Cooling (1)
  • Crimps Noninsulated Connectors, Lugs, and Terminals (1)
  • Crimps Non-Insulated Solderless Terminals and Connectors (1)
  • Crimps UR/UY/UG Insulation Displacement Connectors (IDC)- Scotchlok Type Connectors, Cleanly Strips 23 AWG and 24 AWG Wires (1)
  • Cut and Trim Sheet Metal and Cut Wires (1)
  • Cut Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16" (0.5 cm) Thick (1)
  • Cuts ACSR, Screws, Nails and Most Hardened Wire (1)
  • Cuts and Crimps Wire 10-22 AWG (1)
  • Cuts and Strips Wires (3)
  • Cuts Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16" (0.5 cm) Thick (1)
  • Cuts Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16 in (5 mm) Thick (3)
  • Cuts;Strips and Loops Wires (2)
  • CUTTING (1)
  • Cutting Copper and Aluminum Cable (1)
  • Cutting Holes in Stainless Steel,Mild Steel, Iron, Copper, and Brass (1)
  • Designed For Greater Capacity in Tight Work Spaces (1)
  • Designed for Telecom and Electrical and Heavy-Duty Use (1)
  • Designed to withstand impact drills (11)
  • Designed to Work with Ties Rated at 120 to 250 lbs (1)
  • Detects and Identifies Common Wiring Problems in GFCI Receptacles (1)
  • Detects and Indicates Low Voltage and Standard Voltage; Detects Most Common Wiring Problems in Standard Receptacles (1)
  • Determine Wiring Condition in Outlet (1)
  • Driver (2)
  • Driving Slotted Fasteners (1)
  • Dual-Range Non-contact Detection of the Presence of AC Voltage from 12-1000 VAC or from 70-1000V AC (1)
  • Each Tap Size Rethreads to Next Larger Size If Threads Are Stripped. (2)
  • Easily Cuts 3/8" Flexible Conduit;#10,12,14 Armored Cables with Up to 4 Wires with a Couple of Turns of the Handle (1)
  • Electrical (4)
  • Electrical and Telecommunications Work (1)
  • Electrical Metallic Tubing (EMT) (4)
  • Electricians (4)
  • Electrician's Previous Generation Multimeters (1)
  • Electronics (4)
  • Fan, Air Movement (1)
  • Fastening Screws, Nuts and Bolts (1)
  • Fastening; Impact Driving (10)
  • Fastening;Impact Driving;Ratcheting Driver for Tight Spaces (1)
  • For Aluminum, Brass, Copper, Plastic and Up to 10 Gauge Metal (5)
  • For Cable Cutting in Confined Spaces (1)
  • For Reaching 1/2" (1.3 cm) and 3/4" (1.9 cm) Connectors in Deep or Tight Boxes (1)
  • For Skin and Hand Cleansing (1)
  • For Work Near Energized Sources (9)
  • Form New Threads, Re-form Burred Threads or Clean Out Plaster Obstructions (1)
  • General Application Near Energized Source (1)
  • General Construction (1)
  • General Purpose (10)
  • General Purpose;Skinning (1)
  • General Use (1)
  • Hammering (3)
  • Hammering and Demolition (1)
  • Head Light; Work Light Headlamp (3)
  • Heat Retention (4)
  • Heat Retention General Work Gloves (1)
  • Heavy-Duty Line Work (1)
  • High Strength Steel Handle Features a Swaged End for Inserting Conduit to Correct Overbends Bright Orange Color Handle is Easy to Spot on The Jobsite (1)
  • Holds Multimeters and Clamps (1)
  • Hole Making in Wood, Plastic, Mild and Stainless Steel (1)
  • HVAC (6)
  • Illumination (5)
  • Insulation Resistance Testing (1)
  • Intermediate Risk (2)
  • Job Site (1)
  • Knee Protection (5)
  • Knife Storage (1)
  • Large Cable Stripping (1)
  • Laser Levels (1)
  • Layout Applications Requiring Level and Plumb Checks (1)
  • Light (1)
  • Light Duty Task (2)
  • Linear Measurement (1)
  • Linear Measurment (3)
  • Locate Circuit Breakers in Panel, Test GFCI Devices (1)
  • Long Bolt and Stud Applications (1)
  • Long Bolts, Studs or Threaded Rod (3)
  • Lunch, Food Cooler (2)
  • Magnetic Combination Square and Conduit Layout Template (1)
  • Magnetizing / Demagnetizing Screwdrivers (1)
  • Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly (1)
  • Measures AC Current (4)
  • Measures AC Current and NCVT via Clamp and AC/DC Voltage, Resistance, and Continuity via Test-leads, and Temperature with Thermocouple (1)
  • Measures AC Current and NCVT via Clamp and AC/DC Voltage, Resistance, and Continuity via Test-Leads (1)
  • Measures AC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamp, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple (1)
  • Measures AC Current, AC/DC Voltage, Continuity, Resistance (1)
  • Measures AC/DC Voltage (2)
  • Measures Angles; Use as a Digital Level (1)
  • Measures both AC/DC current and NCVT via the clamp and AC/DC voltage, DC microamp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads, and temperature with thermocouple (1)
  • Measures Current (1)
  • Measures Current to 2000A AC/DC (1)
  • Measures Illuminance Levels in Foot Candles (FC) and Lux (1)
  • Measures Length (1)
  • MODbox™ Case Adapter Rail Attachment (1)
  • Multi Purpose (2)
  • Multi Purpose Utility (2)
  • Multi-Material Drilling (3)
  • Multi-Purpose Cutting (1)
  • Non Ferrous Wire and Soft Metal Cutting (1)
  • Non-Contact Detection and Testing of AC Voltage (2)
  • Non-Contact Detection and Testing of AC Voltage with Integrated Laser Distance Meter (1)
  • Non-Contact Detection and Testing of AC Voltage; Not Recommended for Tamper-resistant Outlets (1)
  • Non-Contact Detection of Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets, and Wires (1)
  • Nut Driving (1)
  • Nut Driving on Unlimited Bolt Lengths (6)
  • Penetration Cuts and Hole Making (1)
  • Phone Storage (6)
  • Pick-up Tool (1)
  • Piercing;Slicing (1)
  • Pole Hardware Installation and Removal (1)
  • Pole;Tree Climber (1)
  • Power for Job Site Power Box (1)
  • Precision Electronics (1)
  • Precision Wire Cutting (1)
  • Precision, Electronics (2)
  • Provides Non-Contact Detection of AC Voltage;Doorbells;Thermostats;Low Voltage Lighting;Irrigation Systems (1)
  • Provides Protection Against Dust Particles, Metal Fumes, Mists and Vapors (1)
  • Prying and Chiseling (1)
  • PVC/Plastic Tube Cutting (1)
  • Ratcheting Driver for Tight Spaces (1)
  • Ratcheting Driving (1)
  • Reinforced Palm with 2 mm Eva Foam Padding (2)
  • Reinforced Thumb and Finger Panels (2)
  • Repair and Restore Fiberglass Fish Tapes (1)
  • Replaceable Hook-Jaw Blades Grab and Hold Cable While Shear-Cutting Action Makes Clean Cuts;Not Designed for Cutting Steel or ACSR (1)
  • Replacement Bit (1)
  • Replacement for 626 and 627-20 (1)
  • Replacement Part for 4-in-1 Electronics Screwdriver (Cat. No. 32581) (1)
  • Reversible Thumb Stud Provides Easy One-Handed Opening (1)
  • RT310 is an electrical outlet tester that tests for wiring faults in electrical outlets, and Tests AFCI and GFCI Devices (1)
  • Scotchlok UG, UR and UY connectors (1)
  • Screwdriver / Nut Driver (1)
  • Securing VDV and Romex Cable (1)
  • Security;Entertainment;Communications;Environmental Control;Irrigation Systems (1)
  • Self-Leveling Laser Alignment Instrument (1)
  • Self-Leveling Laser Alignment Instrument that Delivers Horizontal and/or Vertical Cross Lines, and/or Plumb Spots (1)
  • Sharpen Knife and Scissors (1)
  • Side Cutting (1)
  • Side Cutting; Stripping (1)
  • Side Cutting; Stripping; Crimping (1)
  • Skinning Small Wire and Cable, General Use (1)
  • Small Part Accessibility and Storage (1)
  • Soft Metal Tube Cutting (1)
  • Specifically Designed for Locking Out Power Sources such as Disconnects, Switches, and Panel Boxes (1)
  • Splinter Guard Allows you to Work Pain-Free and Glove-Free;Maintain Complete Dexterity Whether Installing Wires above Ceilings, in Attics, Through Walls, in Crawl Spaces, Under Carpets or Raised Floors (1)
  • Stacked Circuit Boards, Long Bolt Applications (1)
  • Storage (2)
  • Strip (10-14 SLD)(12-16 STR), Bolt Shear #6-32 and #8-32, Crimps Non-Insulated Connectors, Lugs and Terminals, Cuts Screws, Nails and Most Hardened Wire (2)
  • Stripping Six Standard Wire Size without Nicking Wires (1)
  • Strips 12 AWG Wires (2)
  • Stub UPS;Offsets;Back-To-Back Saddle Bends and Other Bends (1)
  • Tamperproof and Security Bit Driving (1)
  • Tapered Nose Design for Working in Confined Spaces (1)
  • Temperature Measurement via IR (Infrared) and Probe (1)
  • Temperature Measurements Using IR Emission or K-Type Probe (1)
  • Test AC/DC Voltage From 12-600V (1)
  • Testing and Measuring Voltage (5)
  • The 17 In(432 mm) Case Diameter Means You Can Reel In 10% More Tape In A Single Revolution Vs. A 16 In(406 mm) Case. (1)
  • The Lightweight and Strong Fiberglass Composite Tape Resists Harsh Elements and is Strength Rated up to 500 Pulling Pounds. (1)
  • Three 3/16 In (5 mm) Diameter X 5 In (1.52 M) Glow Rods Assemble to A Full 15 In (4.57 M). (1)
  • Tight Wrench-Over-Wrench Applications (3)
  • Tighten and Loosen Locknuts (1)
  • Tightening (2)
  • To Perform Variety of Piercing and Punching Jobs (1)
  • Tool Carrying (13)
  • Tool Storage (6)
  • Tool Storage and Organization (1)
  • Tools, Meters, Small Parts and Tech Devices (2)
  • Tough Applications (1)
  • Trace Energized and Non-Energized Breakers, Fuses, and Wires (1)
  • Tube Cutting and Reaming (1)
  • Turning Fasteners (3)
  • Use with Klein Tools Tradesman Pro™ Pouches (3)
  • Use with Power Impact Drivers (1)
  • Utility (4)
  • View Hot and Cold Spots For Instant Troubleshooting (3)
  • Wire Crimping, Stripping and Cutting (1)
  • Wire Cutting (3)
  • Wire Cutting;Stripping (1)
  • Wire Cutting;Stripping and Twisting Plus Bolt Shearing (1)
  • Wire Pulling (8)
  • Wire Stripping and Cutting (8)
  • Wire Stripping, Cutting and Crimping (2)
  • Wiring Pulling (1)
  • Work Near Energized Sources (1)
  • Work on Up To 9/16" (1.4 cm) O.D. Wire (1)
  • Working on Stacked Circuit Boards or Other Long Bolt Applications (1)
  • Show More...

• Tip Size

  

  • #0 (1)
  • #0;#00 (Phillips Bits);1/8 in;3/32 in (Slotted) (1)
  • #1 (3)
  • #1, #2 (Philips Bits);1/4 in;3/16 in (Slotted Bits);#1, #2 (Square Bits);3/8 in (Hex Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in (6.4 mm), 3/16 in (4.8 mm) (Slotted Bits); (1)
  • #1, #2 (Phillips Bits);1/4 in (6.4 mm), 3/16 in (4.8 mm)(Slotted Bits);#1, #2(Square Bits);T10, T15(Torx(R) Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in (6.4 mm), 5/16 in(7.9 mm) (Slotted Bits);#1, #2 (Square Bits);#1, #2 (Combo Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in(6.4 mm), 3/16 in (4.8 mm) (Slotted Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in(6.4 mm), 3/16 in (4.8 mm) (Slotted Bits);#1, #2 (Square Bits);3/8 in (Hex Bit) (1)
  • #1, #2 (Phillips Bits);3/16 in (4.8 mm);1/4 in (6.4 mm) (Slotted Bits) (1)
  • #1, #2 Square (1)
  • #2 (11)
  • #2 (Phillips Bits);1/4 in;6.4 mm (Slotted Bits);#1, #2 (Square Bits) (1)
  • #2 Phillips and 1/4" (6.4 mm) Slotted, #1 Phillips and 3/16" (4.8 mm) Slotted, #1 and #2 Square (1)
  • #2;1/4 in (2)
  • #3 (2)
  • (8) screwdrivers:#1 ph, #2 ph, 1/4 in slotted, 3/16 in slotted, T10 Torx, T15 Torx, #1 Square-Recess, #2 Square-Recess (2) Nut Drivers:5/16 in, 1/4 in (1)
  • 1/16" (1)
  • 1/20 in;1/16 in;5/64 in;3/32 in;7/64 in;1/8 in;9/64 in;5/32 in (1)
  • 1/4 in;6.4 mm (6)
  • 1/4 in;6.4 mm (Slotted) (1)
  • 1/4" (6.4 mm) (7)
  • 1/4", 5/16" (3)
  • 1/4, 5/16 (1)
  • 1/8 in;3.2 mm (3)
  • 1/8" (3.2 mm) (2)
  • 12 in;12.7 mm (1)
  • 3/16 in;4.8 mm (3)
  • 3/16 in;4.8 mm (Slotted Replacement Bits) (1)
  • 3/16 in;4.8 mm;1/4 in;6.4 mm (Slotted Tip) (1)
  • 3/16 in;7/32 in;1/4 in;5/16 in;3/8 in (1)
  • 3/16" (4.8 mm) (5)
  • 3/16" (4.8 mm); 1/4" (6.4 mm) (1)
  • 3/32 in;2.4 mm (1)
  • 3/32" (2.4 mm) (1)
  • 3/8 in;10 mm (1)
  • 3/8" (9.5 mm) (1)
  • 5/16 (0.8 cm)Weight8 oz (227 g) AD6.027720201103C092644852763000926448527638527627111728Brand NameKlein ToolsIncluded7 Screwdrivers, #1 Phillips, #2 Phillips, 1/4, 5/16", 1/8 (6.4 mm to 3.2 mm) Cabinet Tip 3" (76.2 mm) Shank, 1/8 (3.2 mm) Cabinet Tip 4" (101.6 mm) Shank, 1/8 (3.2 mm) Cabinet Tip 6" (152.4 mm) Shank, and CaseNumber of Pieces7Weight1.1 lb (0.5 kg) AD6.027720201103C092644854842000926448548428548427111728Brand NameKlein ToolsIncluded604-3, 606-2, 607-3 and 608-3InsulatedNoMagneticN0Sub BrandCu (1)
  • 5/16 in;7.9 mm (4)
  • 5/16" (7.9 mm) (2)
  • 5/32" (4 mm) (1)
  • 5/64 in;3/32 in;7/64 in;1/8 in;9/64 in;5/32 in;3/16 in;7/32 in;1/4 in (1)
  • Cabinet Tip: 1/4" (6.4 mm), 3/16" (4.8 mm); Phillips: #2; Square Tip: #2 (1)
  • Show More...

• Finish

  

  • Black Oxide (2)
  • Black Phosphate (1)
  • Chrome Plated (1)
  • Chrome Plated (Shaft) (1)
  • Chrome-Plated (2)
  • Heavy-Duty, Oversized, Plastic-Dipped (Handle) (1)
  • Journeyman (1)
  • Journeyman (Handle) (13)
  • Matte (1)
  • Plastic Dipped (Handle) (18)
  • Polished Black Oxide (1)
  • Polished;Black Oxide;Plastic-Dipped (Handle) (1)
  • Sand Blast with Oil Rub (1)
  • SATIN (2)
  • Steel (1)
  • Show More...

• Blade Length

  

  • — (1)
  • 0.625 in;15.9 mm (Knief Length) (1)
  • 0.75 in;19.05 mm (1)
  • 0.781 in (Knife);19.8 mm (Knife) (1)
  • 1.5" (3.8 cm) (1)
  • 1/2 in;12.7 mm (Knief Length) (2)
  • 12 in;304.8 mm (1)
  • 1-3/4 in;44.5 mm (1)
  • 16 ft (1)
  • 2.0" (4.9 cm) (1)
  • 2.25" (5.7 cm) (3)
  • 2.5 in;63.5 mm (2)
  • 2.563" (6.5 cm) (1)
  • 2.625" (6.7 cm) (1)
  • 2.8 in;71 mm (1)
  • 2.95" (6.4 cm) (1)
  • 2-1/2 in;63.5 mm (3)
  • 25/32 in;19.8 mm (Knief Length) (6)
  • 25/32 in;20 mm (Knief Length) (2)
  • 2-5/8 in;66.7 mm (1)
  • 2-7/16 in (61.9 mm) x 0.025 in (0.6 mm) (1)
  • 3.375" (8.6 cm) (1)
  • 3.4" (8.6 cm) (1)
  • 3.5" (8.9 cm) (2)
  • 3.75" (9.5 cm) (1)
  • 3-1/2 in;89 mm (2)
  • 4 to 8 in (1)
  • 5.2" (13.2 cm) (1)
  • 5.5" (14 cm) (1)
  • 5/8 in;15.9 mm (Knief Length) (4)
  • 6 in;152.4 mm (3)
  • 6" (15.2 cm) (2)
  • 7 in (1)
  • 9 in;228.6 mm (2)
  • Show More...

• Battery Type

  

  • 2 x AAA Alkaline (2)
  • 3 x 1.5V AA Alkaline (1)
  • Show More...

• Cutting Material

  

  • Aluminum;Fiberglass;Plastic (1)
  • Copper, Aluminum (1)
  • Copper:500;Aluminum:750 (Cable) (1)
  • Jab Saw;Cuts Drywall;Wallboard;Plywood;and Plastic (1)
  • PVC and Multi-layer Plastic Tubing (1)
  • Wood;Plastic;Stainless Steel;Mild Steel;Drywall;Ceiling Tile and Laminate Cut Material (1)
  • Show More...

• Handle Material

  

  • — (1)
  • 1680D Ballistic Weave (5)
  • Acetate (3)
  • Aluminum (4)
  • Aluminum Die Cast (1)
  • Anodized Aluminum (8)
  • CA/TPE (1)
  • Canvas (2)
  • Contoured Plastic Over Hardened Steel (1)
  • Cordura(R) Camouflage (1)
  • Cushion Grip (3)
  • Cushion Grip Handle (2)
  • Double Dipped (1)
  • Fiberglass (6)
  • Hardened Tool Steel (1)
  • Heavy-Duty Rubber (2)
  • High-Dielectric Plastic (9)
  • Journeyman (2)
  • Nylon Resin (1)
  • Nylon/Rubber (1)
  • Plastic (26)
  • Plastic and Rubber (1)
  • Plastic Dipped Steel (8)
  • Plastic Grip (3)
  • Plastic-Dipped Steel (1)
  • Plastisol Coated (1)
  • Polyester (1)
  • Rubber (45)
  • Rubber, High-Dielectric Plastic (1)
  • Stainless Steel (3)
  • Steel (6)
  • Strong, Tough, Tempered Steel (1)
  • TPE/Steel (1)
  • Show More...

• Drive Type

  

  • Hex (3)
  • Square-Shank (1)
  • Show More...

• Handle Color

  

  • — (2)
  • Black (55)
  • Black and Yellow (2)
  • Black/ Yellow (2)
  • Black/Orange (1)
  • Black/Red (2)
  • Black/Yellow (9)
  • Blue (11)
  • Blue or Black (1)
  • Blue or White (1)
  • Blue or Yellow (2)
  • BLUE/BLACK (1)
  • Blue/Gray (1)
  • Blue/Red (2)
  • Blue/White (2)
  • Camouflage (1)
  • Camouflage Design (1)
  • Chrome (3)
  • dark blue (2)
  • DARK BLUE/BLACK (1)
  • Glow in the Dark (2)
  • Glow-in-the-Dark (3)
  • GRAY (1)
  • Gray/Black (2)
  • Gray/Yellow (1)
  • Light Blue (4)
  • LIGHT BLUE/BLACK (6)
  • light red (2)
  • ORANGE (1)
  • Orange/Black (6)
  • Red (19)
  • Red or Black (1)
  • RED/BLACK (4)
  • Silver (3)
  • Silver with Wood (1)
  • Transparent Red (5)
  • Wood Grain (2)
  • Yellow (23)
  • Yellow or Black (1)
  • Yellow or White (1)
  • YELLOW/BLACK (33)
  • Show More...

• Number Of Blades

  

  • 1 (3)
  • 3 (1)
  • 6 (1)
  • Show More...

• Voltage Rating

  

  • 1000 V ac/dc (2)
  • 110/125 V ac (1)
  • 12 to 1000 V ac (2)
  • 50 to 1000 V ac (1)
  • 600 V ac/dc (1)
  • Show More...

• Frame Material

  

  • — (1)
  • PC-ABS/Nylon (1)
  • Show More...

• Color

  

  • Black (37)
  • Black (Handle) (24)
  • Black and Orange (3)
  • Black and Red (Handle) (2)
  • Black on Bright Red (1)
  • Black with Gray and Orange Trim (2)
  • Black with High-Visibility Yellow Trim (1)
  • Black with Orange/Gray (3)
  • Black, Gray, Orange Trim (1)
  • Black, Reflective Gray, Green Accents (1)
  • Black, Yellow, Red (1)
  • Black/Gray (3)
  • Black/Gray/Orange (5)
  • Black/Orange (7)
  • Black/Orange Piping (1)
  • Black/Orange/Gray (4)
  • Black;Red;Yellow;Green;Blue;Brown (handle) (2)
  • Black;Reflective Grey;Green Accents (2)
  • Black;Yellow (Handle) (1)
  • Blue (1)
  • Blue/Black (Handle) (1)
  • Brown (4)
  • Camouflage (5)
  • Camouflage (Handle) (1)
  • Camouflage/Black (1)
  • Clear/White (1)
  • Dark Blue (Handle) (1)
  • Dark Blue/Black (Handle) (1)
  • Dark Gray (1)
  • Glow (Handle) (1)
  • Glow in the Dark (1)
  • Glow in the Dark (Handle) (1)
  • Gray (1)
  • Gray Knit, Black Coating, Black Trimmed Cuff (1)
  • Gray Knit, Black Coating, Orange Cuff Thread (2)
  • Gray with Orange (1)
  • Gray/Black (1)
  • Gray/Black, Blue/Black (1)
  • High-Visibility Orange (1)
  • High-Visibility Yellow Knit, Black Coating, Orange Cuff Thread (2)
  • Light Blue (Handle) (1)
  • Light Blue/Black (Handle) (4)
  • Light Red (Handle) (1)
  • Maroon (2)
  • Natural (2)
  • Natural Tan/Black (2)
  • Natural/Brown (2)
  • Olive;Orange;Royal Blue;Yellow (1)
  • Orange (5)
  • Orange (Case) (1)
  • Orange and Black (Handle) (1)
  • Orange, Black, Gray (2)
  • Orange, Dark Gray (1)
  • Orange, Gray (1)
  • Orange/ Black (1)
  • Orange/Black (8)
  • Orange/Black; Gray/Black (1)
  • Orange;Black (1)
  • Red (Handle) (3)
  • Red;Black (Handle) (3)
  • Red;Gray;Black;Brown (1)
  • Royal Blue (1)
  • Silver (2)
  • Silver (Handle) (3)
  • Solid Blue (Handle) (1)
  • Tan (3)
  • Transparent Red (Handle) (2)
  • White (1)
  • Yellow (1)
  • Yellow (Handle) (11)
  • Yellow and Black (Handle) (2)
  • Yellow/Black (4)
  • Yellow;Black (1)
  • Yellow;Black (Handle) (11)
  • Show More...

• Handle Type

  

  • — (1)
  • Aluminum (1)
  • Bender Head (1)
  • Black Plastic (1)
  • Black Powder Coat on Alloy (1)
  • Color-Coded Handles (3)
  • Comfort Grip (1)
  • Curved (1)
  • CUSHION GRIP (28)
  • Cushion-Grip (9)
  • Cushion-Grip with Spin Top (2)
  • Double Dipped for Comfort Grips (3)
  • Dual-Material Journeyman Grip (2)
  • Ergonomic (1)
  • Folding Pocket Style (1)
  • Handle Grips for Comfort (1)
  • Lightweight (2)
  • Nut Type Utility (1)
  • Plastic Contoured Grip (1)
  • Plastic Covered Cushioned Handles (1)
  • Plastic Dipped (1)
  • Plastic-Covered Cushioned Handles (1)
  • Plastic-Covered Handles (1)
  • Ratcheting (1)
  • Ratcheting Quick Connect (1)
  • Skeleton (2)
  • Slim (4)
  • Soft Grip Ergonomic (1)
  • Soft Touch Grip (1)
  • Ultra-comfortable hand grip (1)
  • Show More...

• Size

  

  • 1/2", 3/4" (1)
  • 1/2", 3/4" and 1" (1)
  • 1/2", 3/8", 5/16", 1/4", 7/32", 3/16", 5/32", 9/64", 1/8", 7/64", 3/32" (1)
  • 1/2", 9/16" 5/8", 3/4" (1)
  • 1/8" to 1/2" (3.2 to 12.7 mm); 1/4" to 3/4" (6.4 to 19.1 mm); 3/16" to 7/8" (4.8 to 22.2 mm); 7/8" to 1-3/8" (22.2 to 34.9 mm) (1)
  • 13 x 29.5 (33 x 74.9 cm) (1)
  • 19 oz (0.6 L) (1)
  • 3/16" to 7/8" (4.8 to 22.2 mm) (1)
  • 3/16", 7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 1/8", 9/64", 5/32", 3/16",7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 7/32", 1/8", 9/64", 5/32", 3/16", 1/4", 5/16", 3/8" (1)
  • 3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1)
  • 3/8" x 2-5/8" (1 x 6.7 cm) (1)
  • 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1)
  • 7.9 x 0.6 x 1.6 in;20.1 x 1.5 x 4.1 mm (1)
  • 7/8" to 1-3/8" (22.2 to 34.9 mm) (1)
  • 72-Count Bucket (1)
  • Extra Large (5)
  • Extra-Large (9)
  • Extra-Large (10) (1)
  • Large (14)
  • M/L (1)
  • Medium (3)
  • Medium/Large (1)
  • One Size Fits Most (5)
  • Small (1)
  • X-Large (2)
  • XX-Large (1)
  • Show More...

• Special Features

  

  • : IR Thermometer, Laser Pointer, LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (1)
  • 1/4-20 Threaded Hole for Tripod, Cross Bubble Vial, Leveling Base Included, Magnetic Mounting, V-groove (1)
  • 25 Piece Master Electrician's Kit; Piano Hinged Metal Box Includes Latch with Padlock Eye and Handle (1)
  • 3" (7.6 cm) Hollow Shafts (1)
  • 32.8 ft (10 m) Connectivity Range;Powerful Rear Magnet Holds Speaker to Metal Surfaces (1)
  • 39 Different Precision Bits Including Bits for Apple® Products, Magnetic (1)
  • 40% Slimmer Jaws (3)
  • 45° Tilt Capability (1)
  • 4X Stronger Than Traditional Klein Wire Strippers (1)
  • Accommodates Small, Small Extended or Medium Sized Cases (1)
  • Adjustable Length Screwdriver, Shaft Removes to be Impact Driver Attachment (2)
  • Adjustable Length Screwdriver, Shaft Removes to be Impact Driver Attachment, Flip Socket (1)
  • Adjustable Mounts Slide on Bar (1)
  • Adjustable Vents (3)
  • Allows use of K-Type Thermocouples into Banana Jacks (1)
  • Aluminum Titanium Nitride Coating; Dual Straight Fluting (1)
  • Angled Head (1)
  • Anti-fog, Scratch-resistant, Lightweight, Non-slip Fit (1)
  • Approved to NIOSH Standard (TC-84A-5395), Non-Metal; Latex and Silicone Free, Lightweight TPE Face Piece; Low Profile Filters for Unobstructed Field of Vision (1)
  • Assisted Open (1)
  • Audible Alarm, Magnetic Base, V-Grooves on Top and Bottom (1)
  • Audible Alert, Auto-Power Off, Visual Notification (3)
  • Auto Power-Off (1)
  • Automatic Ranging for Measurement; NCVT (1)
  • Automatically Ranging True Root Mean Squared (TRMS) Measurement Technology for Accuracy; AC/DC Current Measurement; High Visibility Reverse Contrast LCD; NCVT (1)
  • Automatically Ranging True Root Mean Squared (TRMS) Measurement Technology for Accuracy; NCVT; Added Temperature (1)
  • Automatically Ranging True Root Mean Squared (TRMS) Measurement Technology for Accuracy; NCVT; HVAC Applications (1)
  • Auto-off Light Sensor; Battery Gauge; Fabric Strap (1)
  • Auto-off Light Sensor; Battery Gauge; Silicone Strap (1)
  • Auto-power Off, Max/Min, Hold, Auto-Ranging and Low Battery Icons (1)
  • Backlit Display for Clear Readings (1)
  • Battery Status Indicators, Rugged Chassis, Smart Battery Protection, Qualcomm® Quick Charge™ 3.0 Technology (1)
  • Bearing-Assist Open; Wire Stripping Notches 10-14 AWG Solid/12-16 AWG Stranded, Wire Loop Hole (1)
  • Bearing-Assist Opening Mechanism (1)
  • Belt Clip, Cable Guide, Adjustable Force Setting, Forward Action Design (1)
  • Breathable Mesh Back; Elastic Cuff with Silicone (2)
  • Broad Head for Larger Striking Surface (1)
  • Built-in Test Lead Holder and Integrated Flashlight (1)
  • Chain Tape Thong (2)
  • Class IIIa Red Laser; Focusable; Magnetic; Hands-Free (1)
  • Clover Design Features Four Different Sizes in One Tool (2)
  • Coats Better and 30% More Slippery than Gel or Wax Lubricants (1)
  • Color Coded Rings and Hot Stamped Caps (1)
  • Combines Common Wire Stripping Sizes with a Crimper and Two Cutters (1)
  • Comes with One Blade Stored in Handle for Convenience; Depth of Cut Adjusts Between Standard MC and Reduced Diameter MC (1)
  • Compact and Lightweight (7)
  • Complete Kit for Preparing and Connecting F Connectors (1)
  • Concrete Tight (1)
  • Connects to all MODbox™ Tool and Part Pouches (1)
  • Convenient Chart on the Tester (2)
  • Crimper (2)
  • Crimper and Wire Stripping Holes (1)
  • Crimping Die Behind Hinge For Superior Leverage Crimping Non-Insulated Connectors, Lugs and Terminals. (2)
  • Cushion for Comfort, Integrated Pick and Spudger, MIM Blade for Accuracy and Durability (1)
  • Cushion Grip (2)
  • Cushion-grip Handle (1)
  • Cushion-Grip™ (1)
  • Cut Resistance, Easy Pull-On Style, Touchscreen (2)
  • Cuts Acsr, Screws, Nails and Most Hardened Wire. (2)
  • Deep Pocket Clip (2)
  • Designed for use with Click Lock™ Modular System (4)
  • Double Dipped (1)
  • Double Interlocking Hasp of Tempered Steel with Patented Interlocking Tabs for Extra Security (1)
  • D-Ring for Tethering (1)
  • Dual Targeting Lasers, 20:1 Distance-to-Spot Ratio; Hi/Low Limits with Simultaneous Audible and Visual Alarms When Limits are Breached; Bright Backlit Display; Works with K-Type Probe Also (1)
  • Durable and Comfortable;Stretch Back for Extra Comfort and Flexibility (2)
  • Ear Protection (1)
  • Easily Attaches and Releases from Tool Belts or MODbox™ Rail System (6)
  • Easy Grab and Go Styling (1)
  • Easy-to-read Bold Lines Every 1/8-Inch; Tough Blade; 13-Foot Standout; Double-Sided Blade Printing; Attachment Channel to Tether Tape Measure (1)
  • Easy-to-read Bold Lines Every 1/8-Inch; Tough Blade; 16-Foot Reach; Attachment Channel to Tether Tape Measure (1)
  • Easy-to-read Bold Lines Every 1/8-Inch; Tough Blade; 16-Foot Reach; Double-sided Blade Printing; Attachment Channel to Tether Tape Measure (1)
  • Easy-to-read Bold Lines Every 1/8-Inch; Tough Blade; 16-Foot Reach;Double-Sided Blade Printing; Attachment Channel to Tether Tape Measure (1)
  • Engineered, Manufactured and Tested For Prying and Chiseling. (1)
  • Ensures Precise 90-Degree Bends and Eliminates Dog Legs (1)
  • Evaporative Technology for Rapid Cooling (1)
  • Excess Tie Material is Automatically Cut Off (1)
  • External USB-C port (2)
  • Extra Capacity Size for Use in Confined Spaces (2)
  • Features Low Battery Indicator (2)
  • Features Low Battery Indicator and Auto Shut Off (1)
  • Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers (2)
  • Flame Retardant and Impact Resistant Handle (8)
  • Flame Retardant and Impact Resistant Handle, Tip-Ident® Handle (1)
  • Flashlight and NCV Function on Receiver; Accessories, and Hard Case (1)
  • Flashlight with Work Light Side Barrel LEDs, Magnetic End Cap, Battery Life Indicator, Long-Lasting Battery (1)
  • Flashlight, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (1)
  • Fleece Lining; High-Visibility Yellow Trim (1)
  • Flexible Drill Bit Made of Spring Steel for Extreme Flexibility (1)
  • Flexible Gooseneck (1)
  • Flexible Thermoplastic Rubber (TPR) for the Fingers and Back of the Hand (2)
  • Flip Feature, Nested Adapter (1)
  • Flip Socket, Rare-Earth Magnet (3)
  • Folding (1)
  • Folds for Easy Storage (1)
  • Forged Steel, 4 Times Stronger Than Traditional Klein Wire Strippers (1)
  • Free-Fall Snip, Extended Handle, Serrated Blades (1)
  • Function Selector Switch;Test Lead Input Jacks (1)
  • Gel and EVA Foam, Slip Resistant Rubber Caps (1)
  • General-purpose selection of the most frequently used nut drivers. (1)
  • Glow in the Dark Grips (1)
  • Glow-in-the-Dark Tape and Tip, Clear Case, Removable Tape, Equipped with Fish Rod Attachment Connector (1)
  • Green Led Turns Off and Red Led Illuminates Continuously. (1)
  • Grips charge in natural and artificial lighting. (1)
  • Heavy Duty Reinforced Bottom (1)
  • High and Low Temperature Points, Crosshairs to Pinpoint Specific Temperatures, Options for Temperature Alarms, 3 Color Pallets (1)
  • High and Low Temperature Points, Touch-Point Temperature, Options for Temperature Alarms, Time-Lapse Video, 3 Color Palettes, No Batteries Needed (1)
  • High Intensity White Spotlight and Floodlight, Low-Intensity Red LEDs, Battery Life Indicator, Easy Carry Holster, Magnetic End Cap (1)
  • High Intensity White Spotlight and Floodlight, Low-Intensity Red LEDs, Magnet, Battery Gauge; Fabric Strap with Pencil/Marker Holder (1)
  • High leverage (1)
  • High Leverage, Integrated Stripping Hole (1)
  • High Temperature Range (1)
  • High Visibility Coating, Hands-Free Adjustment (1)
  • High-Grade, Tungsten Carbide Inserts Sharpen Both Sides of the Blade at the Same Time (1)
  • High-Leverage (1)
  • High-Leverage Design (1)
  • High-Leverage Design;Cross-Hatched Knurl (1)
  • Highly Resistant to Acids, Alkalis, and Other soil Components (1)
  • High-Visibility Display with Optical Sensor; Auto-Range; Min/Max/Relative; Low Impedance (LoZ) Mode; Auto Power-Off; Data Hold (1)
  • High-Visibility Orange Body (1)
  • Hinged Design, Extra Layer of Wind Protectant Fabric in front (1)
  • Hollow Shaft, Rare-Earth Magnet, Impact Rated, Color Coded, Extended Length (1)
  • Ideal for Plastic Tubing (1)
  • Impact Rated, Quick Connect Handle, 1/4" Deep Bit Holding (1)
  • Impact Rated; Flip Socket; Rare-Earth Magnet (1)
  • Includes 4 Assorted Colors:Red, Gray, Black and Brown. (1)
  • Includes core wire stripper/cutter;Wire looping and bending holes;Precision-ground stripping holes for easy removal of insulation;Easy-to-read wire gauge markings on both sides for stripping in either direction;Black-oxide finish resists corrosion (3)
  • Includes Crimper (1)
  • Includes Four Assorted Colors:Olive, Orange, Royal Blue, and Yellow. (1)
  • Includes Klein-Kurve(TM) Core Features Plus;Double Dipped Comfort Grips;Handy Closure Lock for Convenient Storage;Screw Shearing Holes;Precision Ground Stripping Holes;Coil Spring Provides Fast Self-Opening Action;Wire Looping and Bending Holes;Strong Gripping Serrated Nose for Easy Bending, Shaping, and Pulling of Wire (3)
  • Increased Usability and Readability Plus a Wider Torque Range (5-40 in. lbs) (1)
  • Induction-hardened 440A Stainless Steel Construction (1)
  • Integrated High Strength Red Laser Pointer, Dual Range Tester (70-1000V; 12V-1000V) AC Voltage Detection, Simultaneous Visual and Audible Voltage Indicators in the Presence of AC Voltage; US Patent No. D750985 (1)
  • Integrated Magnetic 360° Mounting Bracket with 1/4" and 5/8" Tripod Mounting Threads; Mounting Clamp Attachment; Excessive Tilt Indicator (1)
  • Integrated Precision Nut and Screwdriver; Spin Cap and Cushion-Grip Handle for Great Control (2)
  • IP67 Rated (1)
  • Klein Tools' Interchangeable Multi-Bit Screwdrivers/Nut Drivers Are Heavy-Duty Tools Designed For Professionals. They Are Made Of The Highest-Quality Tempered Steel With A Torque-Proof Anchor In The Handle. Strong, Durable Tips Are Manufactured With Squar (3)
  • Klein Tools Specializes In Making Some Of The World's Finest Pliers. The High-Leverage Design Of These 8'' Journeyman Diagonal-Cutting Pliers Provides 36% Greater Cutting Power Than Other Pliers. The Angled Head Design Makes Work Easier In Confined Spac (1)
  • Knife Snap (3)
  • Lanyard Hole Allows for Tethering and Safekeeping (1)
  • Large Hook Attachment (1)
  • Large LCD Display; Patent Pending Detection of Open Neutral Open Ground Wiring Fault; Shows Amount of Time it Takes to Trip GFCI (1)
  • Laser Distance Measuring, Laser Pointer, Reverse Contrast LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (1)
  • Lead Alert; Backlight; Auto Power-Off; Data Hold (1)
  • Lead-Alert; Auto-Range; Min/Max Measurements; Backlight; Auto Power-Off; Data-Hold (1)
  • Leather construction. (1)
  • LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (2)
  • Light Array, Magnet, Battery Gauge; Fabric Strap with Pencil/Marker Holder (1)
  • Lightweight and Compact (1)
  • Lots of Room for Tools (1)
  • Low Battery Indicator, Built-in Test Lead Holders, Backlit Display (1)
  • Low Impedance (LoZ) Mode; Dedicated Mode for Capturing Inrush Current; Integrated Non-Contact Voltage Tester (1)
  • Max/Min, Hold and Average Functions; Auto Power Off (2)
  • Measures Cable Length; Backlit LCD; Hub Blink (1)
  • Metal Belt Clip, Magnetic Flap, Elastic Sides to Fit Various Sizes (1)
  • Multi-Bit Nut Driver, Impact Rated; Flip Socket; Rare-Earth Magnet (1)
  • Newly Crimped on Eyelets Meet or Exceed Original Factory Pulling Strength Requirements (1)
  • NM-B Staple Pulling; Tether Hole for Hanging (1)
  • No Batteries Required (1)
  • No. 2 Phillips Screwdriver, 3 Wire Stripping Notches (1)
  • Non-conductive fish tape and eyelet tip offer added protection against shock from energized sources. (1)
  • Non-Slip Grip;TPR on Back of Hand for Extra Protection;Cut Resistant (2)
  • Optimized Housing Design; Multi-Groove Fiberglass Tape (2)
  • Optimized Teeth Pattern for Fast, Consistent Cutting of Steel Including Stainless (1)
  • Oversized (1)
  • Padded Liner with Breathable Mesh; Loop Tape Measure Holder (3)
  • Patent Pending Angle Setter™ Technology (3)
  • Patented Magnet Track Secures Level to Surfaces (1)
  • Patented Magnet Track Secures the Level to Any Metal Surface (2)
  • Perfect For the Trade Apprentice Starting Out (2)
  • Pivoting Light Head (1)
  • Plastic-Dipped, Cushioned Handles (1)
  • Pocket Sized, IR and Probe Thermometer; Hanging Hook for Use with Air Vents (1)
  • Precision Machined; Heat Treated (2)
  • Pulls Flat Steel Fish Tape (1)
  • Quick Release Plate (1)
  • Rare Earth Magnet in Lower Barrel (1)
  • Rare Earth Magnetic Tips; Heavy Duty (1)
  • Rare Earth Magnets (1)
  • Rare Earth Magnets, Adjustable Bubble Vial, V-Groove on Top (1)
  • Rare Earth Magnets; Contoured Shape (1)
  • Rare-Earth Magnets (1)
  • Ratchet Safety-Release and a Blade-Guard on Cutting and Stripping Knives Reduce Risk of Injury (1)
  • Ratcheting Handle, Impact Rated Components and 1/4" Quick Connect (1)
  • Ratcheting Mechanism (2)
  • Ratcheting-Directions: Forward, Fixed, Reverse; On-Board Bit Storage (1)
  • Rechargeable Battery, Magnetic Mounting Bracket with 1/4-20 Tripod Mounting Threads; 3 Orthogonal 360° Planar Lines (1)
  • Reinforced Bottom (1)
  • Reinforced Bottom, Stand-Up Pouch (1)
  • Reinforced Head (1)
  • Reinforced Palm/Fingertips/Thumb, Cut Resistance, Easy Pull-On Style, Touchscreen (2)
  • Removable 11 Pocket Tool Caddy, Water Resistant (1)
  • Replaceable Blade Knife (1)
  • Replacement for 625-32, 626, and 627-20 (1)
  • Reverse Contrast LCD Display; Auto-Off (1)
  • Rotating Cap for Optimum and Precise Control (2)
  • Rotating Cap, Cushion-Grip™ Handle (1)
  • Scraper, File, Stripping Notches, Serrated Blades (1)
  • Screw Holding (1)
  • Screwdriver Leverage Hole In Head to Provide Extra Torque (1)
  • Secure Tongue and Groove Design For Non-Slip Grip - Even With Heavy Pressure. (2)
  • Serrated Blades, Notches (1)
  • Several Calculation Modes to Facilitate Different Temperature Measurement Applications (1)
  • Situational Awareness, Bluetooth, 23NRR, Dual-Volume Knobs, Hands-Free Calling, Vented Headband, Environmental Noise Cancelling Microphones (1)
  • Slide Drive™ (3)
  • Slim Fit for High Dexterity (3)
  • Slim Profile (1)
  • Slim Profile Tips (1)
  • Slim Profile Tips, Induction Hardened Cutting Blades and 1000V Rated (1)
  • Slim Profile; Lead-Alert; High-Visibility Display with Optical Sensor; Auto-Range; Min/Max Measurements; Auto Power-Off; Data-Hold (1)
  • Split Point Pilot Drill Bit to Prevent Bit Walking; Integrated Flange to Prevent the Operator from Drilling Beyond Sheet Metal (2)
  • Spring Loaded (1)
  • Spring Loaded For Opening Action (1)
  • Spring-action Lock (1)
  • Spring-Loaded (1)
  • Standard and Metric Sizes Marked for Fast Adjustment (1)
  • Standard length for most applications. (1)
  • Stay Open Top (1)
  • Stays Cool up to 12 Hours (1)
  • Stitched and Riveted Leather Construction (1)
  • Strips Six Standard Sizes (1)
  • Supplies Power to Job Sites, Integrated LED Lights (1)
  • Synthetic Leather Palm (2)
  • Telescoping Handle Extends to 39-1/2", 6" dia. Wheels, Molded Kick Plate, Orange Interior, Water Resistant (1)
  • Tenite Plastic for Slip-Resistant Grip and Comfort (2)
  • Tested up to 20kV (5)
  • Tether Hole for Hanging (2)
  • The Diagonal Cutting Pliers From Klein Tools Feature Solid Construction and Performance For Which Klein Pliers Are Known. Short Jaws and Beveled Cutting Edges Allow For Close Cutting Of Wire. They Are Designed With The Rivet Closer to The Cutting Edge For (1)
  • The Klein Tools 2000 Series Pliers Are Strong Enough to Cut Acsr, Screws, Nails, and Most Hardened Wire. This High-Leverage Diagonal-Cutting Plier Has 36% More Cutting Power Because The Rivet Is Placed Closer to The Cutting Edge. An Angled Head Design M (1)
  • Tight Space Cutting (1)
  • Tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. (1)
  • Tip-Ident Quickly Identifies Nut Driver Size (4)
  • Tip-Ident® Quickly Identifies the Screwdriver Type and Tip Orientation (1)
  • Tip-Ident® Quickly Identifies the Type of Screwdriver and Tip Orientation (1)
  • Tip-Ident®; Cushion-Grip (2)
  • Touchscreen Capability on Index Finger;Non-Slip Grip (2)
  • Tough, Durable Rubber Feet Protect from the Elements (2)
  • Tough, durable rubber feet protect from the elements. (5)
  • TPR Knuckles, Reinforced Leather Palm/Fingertips/Thumb, Hook and Loop Closure (2)
  • Triple Layer Protection; Breathable Mesh Back; Elastic Cuff with Silicone (2)
  • Twist On/Off Removable Led Light with Swivel Hook and Magnet, Orange Interior for Easy Tool Visibility, Fully Molded Bottom Protects From the Elements, Shoulder Strap and Padded Handles (1)
  • Uncluttered;Easy to Read Bold Lines Every 1/8" (2)
  • Unique jaw design provides multiple points of contact for maximum torque. (1)
  • Vintage Klein Tools Logo (1)
  • Water Resistant (1)
  • Waterproof, Removable Dual-Direction Pocket Clip, Removable Lanyard (1)
  • Wide Foot Pedal for Stability, Leverage and Comfort (1)
  • Wrench Assist for Additional Torque (1)
  • Wrench Assist for Greater Torque (6)
  • Wrench-Assist For Added Torque (2)
  • Show More...

• Number Of Pieces

  

  • 1 (6)
  • 10 (4)
  • 11 (4)
  • 12 (2)
  • 14 (1)
  • 15 (1)
  • 2 (4)
  • 20 (1)
  • 27 (1)
  • 3 (5)
  • 4 (9)
  • 40 (1)
  • 5 (7)
  • 6 (8)
  • 7 (9)
  • 8 (3)
  • 9 (1)
  • Show More...

• Teeth Per Inch

  

  • 10 (1)
  • 18 (2)
  • 24 (3)
  • 8 (2)
  • Show More...

• Cable Type

  

  • CAT3, CAT5e, CAT6/6A (1)
  • DATA:, Shielded or Unshielded, CAT3, CAT5E, CAT6, CAT6A, CAT7; COAXIAL: RG59, RG6/6Q (1)
  • MTW/THHN/THWN-2 (2)
  • NM-B (1)
  • Solid;Stranded (1)
  • Show More...

• Overall Width

  

  • 0.06" (0.2 cm) (1)
  • 0.188" (0.5 cm) (1)
  • 0.25" (0.6 cm) (1)
  • 0.3" (0.8 cm) (3)
  • 0.45" (1.1 cm) (1)
  • 0.5 (1.3 cm)Weight0.80 oz (22.7 g) AD6.027720201103C092644441905000926444419054420027111503Brand NameKlein ToolsBlade Length1.75 (4.5 cm) (1)
  • 0.5 in;12.7 mm (2)
  • 0.5" (1.3 cm) (2)
  • 0.516 in;13.1 mm (2)
  • 0.6" (1.5 cm) (1)
  • 0.62" (1.6 cm) (1)
  • 0.69" (1.8 cm) (1)
  • 0.7" (1.8 cm) (1)
  • 0.71" (1.8 cm) (1)
  • 0.72" (1.8 cm) (1)
  • 0.73" (1.9 cm) (1)
  • 0.75" (1.9 cm) (1)
  • 0.75" (1.2 cm) (1)
  • 0.75" (2 cm) (1)
  • 0.8" (2 cm) (3)
  • 0.813 in;20.7 mm (1)
  • 0.813" (2.1 cm) (1)
  • 0.84" (2.1 cm); 1.25" (3.2 cm) (1)
  • 0.85" (2.2 cm) (2)
  • 0.88" (2.2 cm) (2)
  • 0.9" (2.2cm) (1)
  • 0.938 in;23.8 mm (1)
  • 0.96" (2.4 cm) (2)
  • 0.984" (2.5 cm) (1)
  • 1 (2.5 cm)Style_NameStandardTether CapableNoTypeIronworker's PliersWeight0.7 oz (308 g) AD6.027720201102C09264472049900092644720499D248-9STT27112114Brand NameKlein ToolsApplicationSoft Annealed Rebar Tie WireCut StyleStandardCutting KnivesStandardHandle ColorRedHandle FinishPlastic DippedHandle Length6.125 (15.6 cm) (1)
  • 1 in;25.4 mm (4)
  • 1" (2.5 cm) (2)
  • 1" (2.5 cm) (5)
  • 1.05" (2.7 cm) (1)
  • 1.06" (3 cm) (1)
  • 1.08" (2.7 cm) (1)
  • 1.09" (2.8 cm) (2)
  • 1.1 in;28 mm (1)
  • 1.1" (2.8 cm) (1)
  • 1.11" (2.8 cm) (1)
  • 1.125" (2.9 cm) (1)
  • 1.17 (3 cm)Quick Release—Range—Set / IndividualSet: 1/4 and 5/16" Nut Driver; 1/4 Socket Adapter; #1 and #2 Phillips; 3/16" and 1/4 Slotted Drive Bits (1)
  • 1.17" (3 cm) (1)
  • 1.21" (3.1 cm) (1)
  • 1.234" (3.1 cm) (1)
  • 1.24" (3.2 cm) (3)
  • 1.25" (3.2 cm) (2)
  • 1.25" (3.2 cm) (8)
  • 1.28" (3.3 cm) (1)
  • 1.297 (3.3 cm)Special FeaturesIncludes 50 BladesType1.0 lb (0.5 kg)Weight1.0 lb (0.45 kg) AD6.027720201103C092644440243000926444402434413027111503Brand NameKlein ToolsBlade Material440A Stainless SteelHandle ColorOrange/BlackHandle MaterialRubberLength Closed4.125 (10.5 cm) (1)
  • 1.297" (3.3 cm) (1)
  • 1.3" (3.3 cm) (2)
  • 1.35" (3.4 cm) (1)
  • 1.36" (3.5 cm) (1)
  • 1.37" (3.5 cm) (1)
  • 1.39" (3.5 cm) (With Transmitter docked in Receiver) (1)
  • 1.4" (3.5 cm) (1)
  • 1.4" (3.6 cm) (1)
  • 1.42" (3.6 cm) (5)
  • 1.45" (3.7 cm) (1)
  • 1.476 in (2)
  • 1.48 in (1)
  • 1.5" (3.8 cm) (6)
  • 1.50" (3.8 cm) (2)
  • 1.6 in (1)
  • 1.6" (4.1 cm) (1)
  • 1.61" (4.1 cm) (1)
  • 1.67" (4.2 cm) (1)
  • 1.7" (4.2 cm) (1)
  • 1.78" (4.5 cm) (1)
  • 1.8 in (1)
  • 1.8" (4.6 cm) (1)
  • 1.84" (4.7 cm) (1)
  • 1.88" (4.8 cm) (2)
  • 1.891" (4.8 cm) (1)
  • 1.9" (4.8 cm) (1)
  • 1.9" (4.8) (1)
  • 1.9" (5 cm) (2)
  • 1.95 in (1)
  • 1/2 in;13 mm (1)
  • 10" (25.4 cm) (1)
  • 10.25" (26 cm) (2)
  • 10.7" (27.2 cm) (6)
  • 10-1/4 in;260.4 mm (1)
  • 11" (27.9) (2)
  • 12" (30.5 cm) (1)
  • 12.25" (31.1 cm) (1)
  • 12.35" (31.4 cm) (4)
  • 12.5 in;318 mm (1)
  • 12.5" (31.8 cm) (2)
  • 12.5" (31.8 cm), 10" (25.4 cm) (1)
  • 12.9" (32.9 cm) (1)
  • 13.5" (34.3 cm) (1)
  • 15.5" (39.4 cm) (1)
  • 16.203 in;411.6 mm (1)
  • 17.75" (45.1 cm) (1)
  • 2 (5.1 cm)Rewind TypeAutomaticSpecial FeaturesUncluttered, Easy to Read Bold Lines Every 1/8 (1)
  • 2 in;50.8 mm (1)
  • 2" (5.1 cm) (1)
  • 2" (5.1 cm) (12)
  • 2.05" (5.2 cm) (1)
  • 2.06" (5.2 cm) (6)
  • 2.09" (5.3 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.13" (5.4 cm) (1)
  • 2.16" (5.5 cm) (1)
  • 2.25" (5.7 cm) (5)
  • 2.25" (6 cm) (1)
  • 2.27" (5.8 cm) (1)
  • 2.29" (5.8 cm) (2)
  • 2.3" (5.8 cm) (1)
  • 2.31" (5.9 cm) (1)
  • 2.33" (6 cm) (1)
  • 2.34 in to 2.367 in (1)
  • 2.34 to 2.367 (5.9 to 6 cm) (1)
  • 2.344" (6 cm) (1)
  • 2.35" (6 cm) (4)
  • 2.5" (6.4 cm) (1)
  • 2.5" (6.4 cm) (1)
  • 2.6" (6.6 cm) (2)
  • 2.688" (6.8 cm) (1)
  • 2.75" (7 cm) (1)
  • 2.75" (70 cm) (1)
  • 2.84" (7.2 cm) (1)
  • 3 (7.6 cm)Size_Name9-PocketSub BrandPowerlineWeight14.7 oz (417 g) AD6.027720201103C092644570001000926445700015700027111715Brand NameKlein ToolsDrive Size0.375(1 cm) (1)
  • 3 (7.6 cm)Size_Name12-InchSpecial FeaturesTether RingStyle_Namewith Tether RingWeight1.4 lb (0.6 kg) AD6.027720201102C09264473026900092644730269D502-1627112112Brand NameKlein ToolsHandle ColorYellowHandle FinishPlastic-DippedJaw Capacity4.25 (10.8 cm) (1)
  • 3" (7.6 cm) (1)
  • 3.00 in;76 mm (1)
  • 3.13" (7.9 cm) (3)
  • 3.14" (8 cm) (1)
  • 3.16" (8 cm) (1)
  • 3.19" (8.1 cm) (1)
  • 3.25 in;84 mm (1)
  • 3.25" (8.3 cm) (1)
  • 3.37" (8.5 cm) (1)
  • 3.5" (8.9 cm) (6)
  • 3.55" (9 cm) (1)
  • 3.75" (9.5 cm) (1)
  • 3.75" (9.1 cm) (1)
  • 3.75" (9.5 cm) (1)
  • 3.81" (9.7 cm) (3)
  • 3.875 in;98.4 mm (1)
  • 3.90" (9.9 cm) (1)
  • 3/16 in (1)
  • 3-5/16 in;84 mm (1)
  • 4 (10.2 cm)Size_Name0.18 to 0.60" Cable DiameterSpecial FeaturesHot LatchSpringYStyle_NameSafe Load 5000 lbSwing LatchNTypeParallel Jaw GripWeight3.8 lb (1.7 kg) AD6.027720201102C09264447753900092644477539KT460027111712Brand NameKlein ToolsApplicationFirmly Grip Insulated Cables and ConductorsCable Diameter0.3 to 0.8" (7.62 to 20.3 mm)Cable TypeACSRConfigurationSpringHot LatchNJaw Length5 (12.7 cm) (1)
  • 4" (10 cm) (1)
  • 4" (10.2 cm) (1)
  • 4.00" (10.2 cm) (1)
  • 4.12" (10.5 cm) (1)
  • 4.15" (10.5 cm) (1)
  • 4.25 in;108 mm (1)
  • 4.25" (10.8 cm) (2)
  • 4.3" (10.9 cm) (1)
  • 4.5" (1.8 cm) (1)
  • 4.5" (11.4 cm) (3)
  • 4.656" (11.8 cm) (2)
  • 4.7" (11.9 cm) (1)
  • 4.7" (11.9 cm) (1)
  • 4.8" (1.9 cm) (1)
  • 4.9" (12.4 cm) (1)
  • 46" (116.8 cm) (1)
  • 5 in;127.0 mm (1)
  • 5" (12.7 cm) (6)
  • 5.1" (13 cm) (1)
  • 5.2" (13.2 cm) (1)
  • 5.25" (13.3 cm) (1)
  • 5.3 in;134.6 mm (1)
  • 5.38" (13.7 cm) (1)
  • 5.5" (14 cm) (1)
  • 5.5" (14 cm) (1)
  • 5.50" (14 cm) (1)
  • 5.9" (15 cm) (1)
  • 50.5" (128.3 cm) (1)
  • 55.5" (141 cm) (1)
  • 6" (15.2 cm) (1)
  • 6" (15.2 cm) (6)
  • 6.18" (15.7 cm) (1)
  • 6.3" (16 cm) (1)
  • 6.5" (16.5 cm) (1)
  • 6.5" (16.5 cm) (2)
  • 6.50" (16.5 cm) (1)
  • 6.75" (17.2 cm) (1)
  • 6.75" (17.1 cm) (1)
  • 7 in;177.8 mm (1)
  • 7" (17.8 cm) (1)
  • 7.25 in;184.2 mm (1)
  • 7.25" (18.4 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7.55" (19.2 cm) (1)
  • 7.7 (20 cm) (1)
  • 7.7" (19.6 cm) (1)
  • 7.75" (19.7 cm) (1)
  • 7-1/4 in;184.2 mm (1)
  • 8" (20.3 cm) (2)
  • 8.1" (20.6 cm) (1)
  • 8.25" (21.1 cm) (1)
  • 8.5" (21.6 cm) (2)
  • 8.625" (21.9 cm) (1)
  • 8.8" (22.4 cm) (2)
  • 8-3/4 in;222.3 mm (1)
  • 9'' (22.9 cm) (2)
  • 9 in;228.6 mm (1)
  • 9" (22.9 cm) (1)
  • 9.8" (24.8 cm) (1)
  • Receiver: 3.90" (9.9 cm); Transmitter: 2.07" (5.3 cm) (1)
  • Show More...

• Handle Length

  

  • — (1)
  • 1.85" (47 mm) (1)
  • 10" (25.4 cm) (2)
  • 13" (33 cm) (1)
  • 13" (36 cm) (1)
  • 2.5" (6.4 cm) (2)
  • 2.82" (7.16 cm); 4.41" (11.20 cm) (1)
  • 3" (7.6 cm) (1)
  • 3.05" (7.7 cm) (1)
  • 3.063" (7.8 cm) (1)
  • 3.1" (7.9 cm) (1)
  • 3.43" (8.7 cm) (2)
  • 3.5 in (1)
  • 3.5" (8.9 cm) (3)
  • 3.54" (9 cm) (1)
  • 3.625" (9.2 cm) (1)
  • 3.72" (9.4 cm) (1)
  • 3.74" (9.5 cm) (1)
  • 3.75" (9.5 cm) (1)
  • 3.81" (9.7 cm) (1)
  • 38 in;965.2 mm (1)
  • 38" (96.5 cm) (2)
  • 4.03" (10.2 cm) (4)
  • 4.09" (10.4 cm) (1)
  • 4.2" (10.7 cm) (3)
  • 4.25" (10.8 cm) (1)
  • 4.3" (10.9 cm) (1)
  • 4.31 (10.9 cm)Handle MaterialRubberInsulatedYesMagneticNoMaterialSteel, PlasticOverall Height1.24 (3.2 cm) (1)
  • 4.31" (10.9 cm) (4)
  • 4.313" (11 cm) (1)
  • 4.313" (109.6 mm) (1)
  • 4.375" (11.1 cm) (1)
  • 4.4" (11.2 cm) (1)
  • 4.406 in;111.9 mm (1)
  • 4.45" (11.3 cm) (2)
  • 4.47" (11.4 cm) (1)
  • 4.48" (11.4 cm) (1)
  • 4.51" (11.5 cm) (1)
  • 4.55" (11.6 cm) (1)
  • 4.7" (11.9 cm) (3)
  • 4.73" (12 cm) (3)
  • 4.74" (12 cm) (2)
  • 4.75" (12.1 cm) (3)
  • 4.8" (12.2 cm) (3)
  • 44" (111.8 cm) (1)
  • 5.0" (12.7 cm) (1)
  • 5.01" (12.7 cm) (1)
  • 5.1" (13 cm) (1)
  • 5.13" (13 cm) (1)
  • 5.13" (13.0 cm) (1)
  • 5.19" (13.2 cm) (1)
  • 5.22" (13.3 cm) (1)
  • 5.281" (13.4 cm) (1)
  • 5.313" (13.5 cm) (1)
  • 5.375" (13.7 cm) (1)
  • 5.41" (13.7 cm) (8)
  • 5.5" (14 cm) (1)
  • 5.5" (14 cm) (2)
  • 5.55" (14.1 cm) (6)
  • 5.57" (14.15 cm) (1)
  • 5.58" (14.2 cm) (1)
  • 5.63" (14.3 cm) (1)
  • 5.69" (14.5 cm) (1)
  • 5.69” (14.5 cm) (1)
  • 5.75" (14.6 cm) (1)
  • 6" (15.2 cm) (1)
  • 6.1" (15.4 cm) (1)
  • 6.31" (16 cm) (1)
  • 6.5" (16.5 cm) (1)
  • 6.63" (16.8 cm) (1)
  • 6.75" (17.2 cm) (1)
  • Varies (1)
  • Show More...

• Jaw Type

  

  • Flat (2)
  • Knurled (2)
  • Narrow Nose Fits into Tight Places (3)
  • Round - Serrated (1)
  • Serrated Nose Jaws to Bend, Shape, or Pull Wire;Holes for Looping Wire Ends (1)
  • Strong-Gripping Serrated Nose for Easy Bending, Shaping, and Pulling Of Wire (2)
  • Show More...

• Length

  

  • 1.625 in;41.3 mm (1)
  • 1000 ft;305 m (1)
  • 13.5 in;342.9 mm (1)
  • 2.5 in;63.5 mm (1)
  • 22 in;558.8 mm (1)
  • 25 ft (Tape);3.5 in;88.9 mm (1)
  • 25 ft (Tape);6.5 in;165.1 mm (1)
  • 41 in;1041 mm (1)
  • 5.5 in;139.7 mm (2)
  • 5.828 in;148 mm (1)
  • 7.02 in;178.3 mm (1)
  • 7.5 in (1)
  • 8-45/64 in;221.1 mm (1)
  • 9-1/2" (241.3 mm) (1)
  • 9-3/32 in;231 mm (2)
  • Show More...

• Jaw Thickness

  

  • 0.09" (0.2 cm) (1)
  • 0.17" (0.4 cm) (1)
  • 0.35" (0.9 cm) (1)
  • 0.36" (0.9 cm) (1)
  • 0.375" (1 cm) (4)
  • 0.46" (1.2 cm) (7)
  • 0.49" (1.2 cm) (3)
  • 0.5 (1.3 cm)Jaw Width1.156 (2.9 cm) (1)
  • 0.5" (1.3 cm) (10)
  • 0.500000000000000 (1)
  • 0.53 (1.4 cm)Jaw Width1.031 (2.6 cm) (2)
  • 0.6" (1.5 cm) (4)
  • 0.613" (1.6 cm) (1)
  • 0.62" (1.6 cm) (6)
  • 0.625 (1.6 cm)Jaw Width1.25 (3.2 cm) (1)
  • 0.625" (1.6 cm) (5)
  • 0.813" (2.1 cm) (1)
  • 15/32 (1.2 cm)Jaw Width1.375 (3.5 cm) (1)
  • 3/8" (1 cm) (1)
  • 5/8 in;15.9 mm (1)
  • Show More...

• Width

  

  • 0.719 in;18.3 mm (3)
  • 1 in;25.4 mm (1)
  • 1.875 in;47.6 mm (1)
  • 2 in;50.8 mm (2)
  • 3 in;76 mm (1)
  • 3.54 in;89.9 mm (1)
  • 3-13/16 in;96.8 mm (2)
  • 3-13/64 in;81.4 mm (1)
  • 4.25 in;108 mm (1)
  • 50.5 in;1282.7 mm (1)
  • 7-1/2" (190.5 mm) (1)
  • Show More...

• Overall Length

  

  • 0.88" (2.2 cm) (1)
  • 0.9" (2.3 cm) (1)
  • 1" (2.5 cm) (1)
  • 1" (2.5 cm) (5)
  • 1.25" (3.2 cm) (1)
  • 1.265 in (2)
  • 1.29" (3.3 cm) (1)
  • 1.38" (3.5 cm) (2)
  • 1.469" (3.7 cm) (1)
  • 1.5 (3.8 cm)Package Quantity6Style_Name6-PackWeight1.0 oz (27 g) AD6.027720201103C092644561191000926445611915611927113101Brand NameKlein ToolsDiameter0.578 (1.5 cm) (1)
  • 1.5 in (1)
  • 1.5 in;38.1 mm (3)
  • 1.62" (4.1 cm) (2)
  • 1.8" (4.6 cm) (2)
  • 1.8" (4.6 cm) (1)
  • 1.85" (4.7 cm) (4)
  • 1.96" (5 cm) (1)
  • 10'' (25.4 cm) (2)
  • 10 in;254.0 mm (2)
  • 10" (25.4 cm) (5)
  • 10.063" (25.6 cm) (1)
  • 10.25" (26 cm) (1)
  • 10.25" (25.4 cm) (1)
  • 10.25" (26 cm) (6)
  • 10.313 (2)
  • 10.313000000000000 (1)
  • 10.39" (26.4 cm) (1)
  • 10.50" (26.7 cm) (1)
  • 10.75" (27.3 cm) (2)
  • 10.781" (27.4 cm) (1)
  • 10.96" (27.8 cm) (With Transmitter docked in Receiver) (1)
  • 1000' (305 m) (1)
  • 10-1/4 in;260.4 mm (2)
  • 10-15/16 in;277.8 mm (2)
  • 11" (27.9 cm) (2)
  • 11" (27.9 cm) (4)
  • 11.25" (28.6 cm) (2)
  • 11.313 (1)
  • 11.5" (29.2 cm) (4)
  • 11.75" (29.9 cm) (4)
  • 11.9" (30.3 cm) (1)
  • 12' (3.7 m) (1)
  • 12" (30.5 cm) (4)
  • 12.25" (31.1 cm) (2)
  • 12.344" (31.4 cm) (1)
  • 12.375" (31.4 cm) (1)
  • 12.5" (31.8 cm) (8)
  • 12.6" (32 cm) (3)
  • 12.8" (32.5 cm) (2)
  • 12.875" (32.7 cm) (1)
  • 12-1/2 in;317.5 mm (2)
  • 12-1/2 in;318 mm (2)
  • 13.125" (33.3 cm) (1)
  • 13.25" (33.7 cm) (1)
  • 13.438" (34.1 cm) (1)
  • 13.5" (34.3 cm) (5)
  • 14" (35.6 cm) (3)
  • 14.000000000000000 (1)
  • 14.5" (36.8 cm) (1)
  • 14.6" (37.9 cm) (2)
  • 14.75" (37.5 cm) (2)
  • 14.84" (38 cm) (1)
  • 15" (38.1 cm) (1)
  • 15.25" (38.7 cm) (1)
  • 15.5" (39.4 cm) (2)
  • 15.750000000000000 (1)
  • 16" (40.6 cm) (1)
  • 16-1/4 in;412.8 mm (2)
  • 17.5" (44.5 cm) (3)
  • 1-7/8 to 3 in;47.6 to 76.2 mm (2)
  • 18 (45.7 cm)Size_Name1.5-InchStyle_NameRegular NutTaper Diameter1-1/8 to 1/4" (2.9 to 0.6 cm)Weight3.4 lb (1.5 kg) AD6.027720201103C092644322402000926443224023224027112806Brand NameKlein ToolsApplicationFor Aluminum, Brass, Copper, Plastic and Up to 10 Gauge MetalMaterialHigh Speed SteelShank Type1/4 Hex (1)
  • 19" (48.3 cm) (2)
  • 2" (5.1 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.25" (5.7 cm) (1)
  • 2.438" (6.2 cm) (1)
  • 2.5" (6.4 cm) (3)
  • 2.57" (6.5 cm) (1)
  • 2.6" (6.6 cm) (1)
  • 2.60" (6.6 cm) (1)
  • 2.9" (7.3 cm) (1)
  • 24" (61 cm) (1)
  • 24" (61 cm) (2)
  • 28.31" (71.9 cm) (1)
  • 3" (8 cm) (1)
  • 3.02" (7.7 cm) (1)
  • 3.07" (8 cm) (1)
  • 3.25" (8.3 cm) (1)
  • 3.359" (8.5 cm) (1)
  • 3.43" (8.7 cm) (2)
  • 3.438" (8.7 cm) (2)
  • 3.5 (1)
  • 3.5" (8.9 cm) (1)
  • 3.5" (8.9 cm) (6)
  • 3.625" (9.2 cm) (1)
  • 3.7" (9.4 cm) (1)
  • 3.75" (9.5 cm) (2)
  • 3.875" (9.8 cm) (1)
  • 3.9" (9.9 cm) (1)
  • 30 (76.2 cm)Size_Name30-Inch, 3/4-Inch HexStyle_NameStraightWeight3.2 lb (1.5 kg) AD6.027720201103C092644324109000926443241093241027112814Brand NameKlein ToolsFor Use WithExtended Reach (32560)Package Quantity2 BitsTip Type#2 Square; #2 PhillipsWeight2.4 oz (68 g) AD6.027720201103C092644324116000926443241163241127112814Brand NameKlein ToolsFor Use WithExtended Reach (32560)Package Quantity2 BitsTip Type#1 Square; 1/4 (0.6 cm) Slotted (1)
  • 32" (81.3 cm) (1)
  • 36.45" (92.6 cm) (1)
  • 4" (10.2 cm) (4)
  • 4" to 8" (101.6 to 203.2 mm) (1)
  • 4.27" (10.9 cm) (1)
  • 4.5" (11.4 cm) (2)
  • 4.563" (11.6 cm) (1)
  • 4.57" (11.6 cm) (1)
  • 4.656" (11.8 cm) (2)
  • 4.75" (12.1 cm) (1)
  • 4.797" (12.2 cm) (1)
  • 40" (101.6 cm) (1)
  • 41" (104.1 cm) (1)
  • 43"(109.2 cm) (1)
  • 44.5" (113 cm) (1)
  • 47" (119.4 cm) (1)
  • 49" (124.5 cm) (1)
  • 5" (12.7 cm) (1)
  • 5" (12.7 cm) (1)
  • 5.05" (12.8 cm) (1)
  • 5.1" (13 cm) (1)
  • 5.25" (13.3 cm) (2)
  • 5.3" (13.5 cm) (1)
  • 5.5" (14 cm) (1)
  • 5.5" (14 cm) (3)
  • 5.5" (14.0 cm) (1)
  • 5.50" (14 cm) (1)
  • 5.67" (14.4 cm) (1)
  • 5.70" (14.5 cm) (1)
  • 5.75" (14.6 cm) (2)
  • 5.78" (14.7 cm); 8.38" (21.3 cm) (1)
  • 5.82" (14.8 cm) (1)
  • 5.82" (14.8 cm) (1)
  • 5.86" (14.9 cm) (1)
  • 5.98" (15.2 cm) (1)
  • 51"(129.5 cm) (1)
  • 52" (13.2 cm) (1)
  • 5-3/4 in;146.1 mm (2)
  • 54" (137.2 cm) (2)
  • 6" (15.2 cm) (2)
  • 6" (15.2 cm) (6)
  • 6.06" (15.4 cm) (1)
  • 6.125" (15.6 cm) (2)
  • 6.15" (15.6 cm) (1)
  • 6.25" (15.9 cm) (1)
  • 6.297000000000000 (1)
  • 6.3 (1)
  • 6.3" (16 cm) (2)
  • 6.313000000000000 (2)
  • 6.328000000000000 (1)
  • 6.35" (16.1 cm) (1)
  • 6.406" (16.3 cm) (1)
  • 6.41" (16.2 cm) (2)
  • 6.45" (16.4 cm) (1)
  • 6.5" (16.5 cm) (5)
  • 6.53" (16.6 cm) (1)
  • 6.625" (16.8 cm) (1)
  • 6.68" (17 cm) (2)
  • 6.75 (5)
  • 6.75 in;171.5 mm (2)
  • 6.75 to 7.3125 (2)
  • 6.75" (17.2 cm) (1)
  • 6.75" (17.2 cm) (3)
  • 6.750000000000000 (1)
  • 6.82" (17.3 cm) (1)
  • 6-1/4 in;158.8 mm (3)
  • 6-1/8 in;155.6 mm (4)
  • 6-3/4 in;171.5 mm (4)
  • 7" (17.8 cm) (2)
  • 7" (17.8 cm) (8)
  • 7.125" (18.1 cm) (2)
  • 7.17" (18.2 cm) (1)
  • 7.18" (18.2 cm) (1)
  • 7.25 in;184.2 mm (2)
  • 7.25" (18.4 cm) (3)
  • 7.3" (18.5 cm) (1)
  • 7.313 (2)
  • 7.32" (18.6 cm) (1)
  • 7.344" (18.7 cm) (1)
  • 7.4" (18.8 cm) (2)
  • 7.5" (19.1 cm) (1)
  • 7.5" (19.1 cm) (5)
  • 7.65" (19.4 cm) (1)
  • 7.75 in;196.9 mm (2)
  • 7.75" (19.7 cm) (1)
  • 7.75" (19.7 cm) (4)
  • 7.75" (19.7 cm); 8.25" (21 cm) (1)
  • 7.750000000000000 (1)
  • 7.76" (19.7 cm) (1)
  • 7.875" (20 cm) (2)
  • 7.9 in;20.1 mm (1)
  • 7.98" (20.3 cm) (1)
  • 7-1/8 in;181.0 mm (2)
  • 7-3/4 in;196.9 mm (5)
  • 8 in;203 mm (2)
  • 8 in;203.2 mm (4)
  • 8" (20.3 cm) (7)
  • 8.09" (20.6 cm) (1)
  • 8.1" (20.6 cm) (1)
  • 8.125" (20.6 cm) (1)
  • 8.203" (20.8 cm) (1)
  • 8.25" (21 cm) (3)
  • 8.25" (21.0 cm) (1)
  • 8.313" (21.1 cm) (2)
  • 8.344" (21.2 cm) (3)
  • 8.375" (21.3 cm) (1)
  • 8.39" (21.3 cm) (1)
  • 8.41" (21.4 cm) (2)
  • 8.45" (21.5 cm) (4)
  • 8.5" (21.6 cm) (2)
  • 8.5" (21.6 cm); 9" (22.9 cm) (1)
  • 8.75" (22.2 cm) (3)
  • 8.94" (22.7 cm) (1)
  • 8.98" (22.8 cm) (1)
  • 8-1/16 in;204.8 mm (3)
  • 8-1/4 in;209.6 mm (2)
  • 8-1/8 in;206.4 mm (3)
  • 8-11/32 in;211.9 mm (3)
  • 8-5/8 in;219.1 mm (2)
  • 8-7/16 in;214.3 mm (2)
  • 8-9/16 in;217.5 mm (2)
  • 9 in (2)
  • 9 in;228.6 mm (2)
  • 9 in;229 mm (3)
  • 9" (22.9 cm) (9)
  • 9.0" (23 cm) (1)
  • 9.09" (23.1 cm) (3)
  • 9.125" to 9.6875" (23.2 to 24.6 cm) (1)
  • 9.25" (23.5 cm) (3)
  • 9.3" (24 cm) (1)
  • 9.3/8 in;238.1 mm (1)
  • 9.35" (23.7 cm) (4)
  • 9.375000000000000 (1)
  • 9.391" (23.9 cm) (3)
  • 9.5" (24.1 cm) (2)
  • 9.5" (24.1 cm) (5)
  • 9.540000000000000 (1)
  • 9.55" (24.3 cm) (1)
  • 9.6" (24.4 cm) (1)
  • 9.73" (24.7 cm) (1)
  • 9.75 (5)
  • 9.75 to 10.3125 (1)
  • 9.75" (24.8 cm) (3)
  • 9.75" (24.8 cm); 11.31" (28.7 cm) (1)
  • 9.750000000000000 (1)
  • 9-1/2 in;241 mm (2)
  • 9-1/2 in;241.3 mm (6)
  • 9-3/4 in;247.7 mm (5)
  • 9-3/8 in;238.1 mm (2)
  • 9-7/64 in;231.4 mm (2)
  • Show More...

• Jaw Width

  

  • 0.26" (0.7 cm) (1)
  • 0.375" (1 cm) (1)
  • 0.5 in;12.7 mm (1)
  • 0.5" (1.3 cm) (2)
  • 0.688" (1.7 cm) (4)
  • 0.75" (1.9 cm) (1)
  • 0.938" (2.4 cm) (1)
  • 0.969" (2.5 cm) (1)
  • 1 in;25.4 mm (7)
  • 1.02" (2.6 cm) (1)
  • 1.154" (0 cm) (1)
  • 1.188 (3 cm)Joint TypeHot RivetedMaterialSteelOverall Length8.063 (20.5 cm) (1)
  • 1.188" (3 cm) (1)
  • 1.25 in;31.8 mm (2)
  • 1.25" (3.2 cm) (7)
  • 1.26" (3.2 cm) (1)
  • 1.29" (3.3 cm) (1)
  • 1.75" (4.5 cm) (1)
  • 1-1/14 in;32 mm (2)
  • 1-1/4 in;31.8 mm (7)
  • 1-3/16 in;30.2 mm (7)
  • Show More...

• Height

  

  • 1 in;25.4 mm (2)
  • 1.156 in;29.4 mm (1)
  • 1.625 in;41.3 mm (1)
  • 1-35/64 in;39.3 mm (2)
  • 1-39/64 in;40.9 mm (1)
  • 16" (1)
  • 16-1/4" (412.8 mm) (1)
  • 2.10 in;53.3 mm (1)
  • 2.875 in;73 mm (1)
  • 20" (1)
  • 6.5 in;165.1 mm (1)
  • 7" (178mm), 5.5" (140mm) (1)
  • 9-1/2" (241.3 mm) (1)
  • Show More...

• Shank Type

  

  • 1/4" Hex (19)
  • 3/8" Hex (2)
  • Hex Arbor (1)
  • Round (48)
  • Round Rapi-Driv(R) (1)
  • Round Rapi-Driv® (2)
  • Slotted (2)
  • Square (4)
  • Show More...

• Battery Life

  

  • — (3)
  • 10 h (1)
  • 10 hr (1)
  • 10 hrs. (1)
  • 125 hr (1)
  • 142 hr (2)
  • 25 hr (1)
  • 5 hr (1)
  • 50 Hours Active (1)
  • 5-year (1)
  • 9 hr (1)
  • All-On/Boost: 4 hr; Spot/High: 12 hr; Flood/Low: 22 hr (4)
  • Average: 134 hr; Continuous IR: 64 hr (1)
  • Flashlight: 6 hr; Worklight: 12 hr (1)
  • Flood/Low Mode: 14 hr; Spot/High Mode 9 hr; Boost Mode: 4 hr (1)
  • High: 4 hr; Low 8 hr (1)
  • High: 5 hr; Low: 9 hr (1)
  • High: 6 hr; Low: 12 hr (1)
  • High: 9 hr; Low: 14 hr (1)
  • Laser On: 31 hr; NCV On with Visual and Audible Alerts: 25 hr (1)
  • Per Mode: 3, 5, 12 or 36 hr (1)
  • Per Mode: 4, 5, 8, 10, 27, 40, 56, or 160 hr (1)
  • Per Mode: 4, 6, 7, 11, 25, or 50 hr (1)
  • Per Mode: 7, 10, 11 or 30 hr (1)
  • Spotlight: 6 hr; Floodlight: 10 hr (1)
  • Up to 10 hr (2)
  • Up to 24 hr (1)
  • Show More...

• Includes

  

  • #1 & #2 Combination, Slotted, Square and Phillips Tips (1)
  • (1) 5/16-Inch Cabinet-Tip;(1) #2 Phillips-Tip Screwdriver (1)
  • (2) Alkaline 1.5V AAA Battery (1)
  • (2) Screwdrivers (1)
  • (3) 5' (1.5 m) Glow Rods with Bullet Nose and Hook Attachments (2)
  • (3) 5/32 in (3.96 mm) diameter 6 in (1.8 m) glow rods with bullet nose and hook attachments (1)
  • (4) Bags (1)
  • (5) 4' (1.2 m) Lo-Flex Fish Rods, (1) 5' (1.3 m) Mid-Flex Glow Rod with Bullet Nose and Hook Attachments (1)
  • (5) Mil Back Plate (1)
  • 1/16 in (2 mm) Slotted;2 in (51 mm) Blade (614-2);#0 Phillips;3 in (76 mm) Blade (613-3);3/32 in (2 mm) Slotted;3in (76 mm) Blade (614-3);1/8 in (3 mm) Slotted;4 in (102 mm) Blade (614-4) (1)
  • 2 x AAA (1)
  • 600-4;602-6;601-3;601-6;605-4;603-3;603-4 (1)
  • 604-3, 606-2, 607-3 and 608-3 (1)
  • AUX Cable;USB Charging Cable (1)
  • Bright LED Flashlight (1)
  • Fan, USB-C Charging Cord, Instruction Manual (1)
  • Handle 51427 (2)
  • Handle 51429 (1)
  • Hard Carrying Case (1)
  • K23;K34;K46 (1)
  • Pouch;Test leads with CAT III/CAT IV;Safety Caps;Thermocouple with Adapter (Temperature-Measuring Models Only);Battery (3)
  • Screw-On Alligator Clip;Pair of Universal Test Leads (1)
  • Six Different Size Knockout Punches and Dies, Two Draw Studs and Ratcheting Box End Wrench (1)
  • Swivel Snap Hook, Web Strap (1)
  • T-Handle Set with Stand, SAE, 6'' Blades (2)
  • T-Handle Set with Stand, SAE, 9'' Blades (1)
  • Tripod, Carrying Bag (1)
  • Show More...

• Graduations

  

  • 1/16 in (1)
  • 1/16" (4)
  • 1/8"; 1/16" (1)
  • Show More...

• Drive Size

  

  • 1/2" (1)
  • 1/4 in;5/16 in (3)
  • 1/4 in;5/16 in;3/8 in (3)
  • 1/4 in;5/16 in;3/8 in;7/16 in;1/2 in;9/16 in Hex Nut Drivers (1)
  • 1/4" (7)
  • 1/4" Dual-Drive (1)
  • 1/4" Hex, 1/2" Square (1)
  • 1/4", 5/16", 3/8", 7/16" (1)
  • 1/4” and 5/16” (2)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16 in;1/2 in (1)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16;1/2 in (1)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16;1/2 in (630 Nut Drivers) (1)
  • 3/8" (1)
  • 5/16 in (1)
  • 5/16 in;1/4 in (2)
  • 5/64 in (2 mm);3/32 in (2 mm);7/64 in (3 mm);1/8 in (3 mm);9/64 in (4 mm);5/32 in (4 mm);3/16 in(5 mm);7/32 in (6 mm) and 1/4 in (6 mm) (1)
  • Multi (1)
  • Show More...

• Number Of Vials

  

  • 1 (1)
  • 3 (5)
  • 4 (2)
  • Show More...

• Jaw Length

  

  • 0.45" (1.1 cm) (1)
  • 0.696" (1.8 cm) (2)
  • 0.781" (2 cm) (1)
  • 0.813 (2.1 cm)Jaw Thickness0.813 (2.1 cm) (1)
  • 0.813 in;20.7 mm (1)
  • 0.83" (2.1 cm) (1)
  • 1" (2.5 cm) (2)
  • 1.085" (2.8 cm) (1)
  • 1.188" (3 cm) (1)
  • 1.25" (3.2 cm) (1)
  • 1.35" (3.4 cm) (1)
  • 1.594 in;40.5 mm (1)
  • 1.594" (4 cm) (1)
  • 1.625" (4.1 cm) (1)
  • 1.91" (4.9 cm) (4)
  • 1.969" (5 cm) (1)
  • 1-19/32 in;40.5 mm (7)
  • 1-19/32 in;41 mm (2)
  • 13/16 in;20.6 mm (7)
  • 2 in;50.8 mm (1)
  • 2" (5.1 cm) (1)
  • 2.04" (0 cm) (1)
  • 2.313 in;58.8 mm (1)
  • 2.32" (5.9 cm) (1)
  • 2.43" (6.2 cm) (1)
  • 2.438" (6.2 cm) (1)
  • 2-3/16 in;55.6 mm (2)
  • 2-5/16 in;58.7 mm (4)
  • Show More...

• Hex Size

  

  • 1/2 in (1)
  • 1/2" (1)
  • 3/16" (1)
  • 3/32Size_Name4-Inch LengthStyle_Name3/32-Inch HexSub BrandJourneymanWeight0.05 oz (1.4 g) AD6.027720201102C09264433653900092644336539JTH4E0727111710Brand NameKlein ToolsBlade Length4 (10.2 cm) (1)
  • 3/8" (1)
  • 5/16" (1)
  • 5/8" (1)
  • Show More...

• Conduit Size

  

  • 1" (1)
  • 1/2 in (12.7 mm) Rigid/IMC;3/4 in (19.1 mm) Thinwall/EMT (1)
  • 1/2 in;12.7 mm;3/4 in;19.1 mm;1 in;25.4 mm (3)
  • 1/2" (1)
  • 3/4 in;19 mm Rigid/IMC;1 in EMT (1)
  • 3/4" (1)
  • Show More...

• Shank Length

  

  • 1" to 2.75" (2.5 to 7 cm) (1)
  • 1" to 4" (2.5 to 10.1 cm) (2)
  • 1.266" (3.2 cm) (1)
  • 1.297" (3.3 cm) (2)
  • 1.5" (3.8 cm) (3)
  • 10 (25.4 cm)Shank TypeRoundSize_Name3/8 inch Tip, 10 inch ShankSub BrandCushion-GripTip Size3/8 (9.5 mm) (1)
  • 1-17/64 in;32.1 mm (1)
  • 12 in;304.8 mm (1)
  • 2 in to 4 in;50.8 mm to 101.6 mm (1)
  • 2 to 4 (5.1 to 10.2 cm) (1)
  • 2" (5.1 cm) (1)
  • 2.5 in;63.5 mm (1)
  • 2.797 in;71 mm (1)
  • 2.797" (7.1 cm) (1)
  • 2.95 in;75 mm (1)
  • 2.953 in;75 mm (1)
  • 3 (7.6 cm)Shank TypeRoundSize_Name5-InchStyle_NamePhillipsTip Size1/2 (12.7 mm) (1)
  • 3 in;76.2 mm (3)
  • 3" (7.6 cm) (2)
  • 3" (7.6 cm) (4)
  • 3" (7.6 cm); 4" (10.2 cm) (1)
  • 3" to 6" (7.6 to 15.2 cm) (1)
  • 3.1 (7.9 cm)Special FeaturesIncreased Usability and Readability Plus a Wider Torque Range (5-40 in. lbs)StandardN.I.S.T. Traceable Calibration Certificate; ASME B107.300-2010TypeTorque Screwdriver SetWeight1.0 lb (0.5 kg) AD6.027720201103C092644551635000926445516355704L24112403Brand NameKlein ToolsBelt Width2 (5.1 cm) (1)
  • 3.1" (7.9 cm) (2)
  • 3.25" (8.3 cm) (1)
  • 3.38" (8.6 cm) (1)
  • 3.5" (8.9 cm) (3)
  • 3.6" (9.2 cm) (1)
  • 3.625" (9.2 cm) (1)
  • 3.625;4.313 (1)
  • 3.63" (9.2 cm) (1)
  • 4 in;101.6 mm (13)
  • 4 to 8 in;101.6 to 203.2 mm (1)
  • 4" (10.2 cm) (1)
  • 4" (10.2 cm) (12)
  • 4" (10.2 cm), 6" (15.2 cm) (1)
  • 4" (10.2 cm); 6" (15.2 cm) (1)
  • 4.000000000000000 (1)
  • 4-7/64 in;104.4 mm (1)
  • 6 (15.2 cm)Shank TypeRoundSpecial FeaturesSlim Profile TipStandardASTM F-1505-16, IEC 60900:2018Tip Size3/16 (0.5 cm) (1)
  • 6 in;152.4 mm (7)
  • 6" (15.2 cm) (1)
  • 6" (15.2 cm) (6)
  • 6" (15.2 cm); 7" (17.8 cm) (1)
  • 6.35" (16 cm) (1)
  • 7 in;177.8 mm (3)
  • 7" (17.8 cm) (4)
  • 7.75" (19.7 cm) (1)
  • 8" (20.3 cm) (6)
  • 9-7/64 in;231.4 mm (1)
  • Double-End: 3.5" (8.9 cm); Single-End: 5.75" (14.6 cm) (1)
  • Long 2.09" (5.3 cm), Short 0.34" (0.9 cm) (1)
  • Standard: 2" (5.1 cm); Extended: 4" (10.2 cm) (1)
  • Show More...

• Weight

  

  • 0.02 oz (0.45 g) (1)
  • 0.06 oz (1.8 g) (1)
  • 0.1 lb;0.05 kg (1)
  • 0.1 oz (3 g) (1)
  • 0.10 lb (0.05 kg) (3)
  • 0.10 lb;0.05 kg (3)
  • 0.10 oz (2.8 g) (5)
  • 0.14 lb (1)
  • 0.15 lb;0.07 kg (4)
  • 0.16 oz (4.5 g) (4)
  • 0.18 lb (0.08 kg) (1)
  • 0.19 lb;0.09 kg (1)
  • 0.2 oz (91 g) (1)
  • 0.20 lb;0.09 kg (4)
  • 0.25 lb;0.11 kg (6)
  • 0.26 lb;0.12 kg (2)
  • 0.27 lb;0.12 kg (3)
  • 0.28 lb (2)
  • 0.3 oz (8 g) (2)
  • 0.30 lb;0.14 kg (4)
  • 0.32 oz (9.1 g) (1)
  • 0.34 lb;0.15 kg (4)
  • 0.35 lb;0.16 kg (2)
  • 0.38 lb (1)
  • 0.4 lb (0.2) kg (1)
  • 0.40 lb;0.18 kg (2)
  • 0.40 oz (11.0 g) (2)
  • 0.41lb;0.19 kg (2)
  • 0.48 lb;0.22 kg (3)
  • 0.5 oz (14 g) (1)
  • 0.50 lb (0.23 kg) (1)
  • 0.50 lb;0.23 kg (4)
  • 0.50 oz (14.2 g) (5)
  • 0.59 oz (16.7 g) (1)
  • 0.6 oz (17 g) (1)
  • 0.60 lb;0.27 kg (2)
  • 0.63 lb;0.29 kg (4)
  • 0.64 lb;0.29 kg (2)
  • 0.77 lb (1)
  • 0.8 oz (23 g) (3)
  • 0.8 oz;23 g (2)
  • 0.80 lb (2)
  • 0.80 lb;0.36 kg (3)
  • 0.80 oz (22.7 g) (3)
  • 0.81 lb;0.37 kg (2)
  • 0.84 lb;0.38 kg (1)
  • 0.9 oz (26 g) (3)
  • 1 lb (0.45 kg) (1)
  • 1.0 lb (0.5 kg) (9)
  • 1.09 lb (0.5 kg) (1)
  • 1.1 lb (0.5 kg) (11)
  • 1.1 lb;0.5 kg (9)
  • 1.1 oz (31 g) (2)
  • 1.1 oz;31 g (2)
  • 1.10 oz (31.0 g) (1)
  • 1.13 lb (1)
  • 1.2 lb (0.5 kg) (9)
  • 1.2 lb (0.6 kg) (1)
  • 1.2 lb;0.5 kg (1)
  • 1.2 oz (34 g) (2)
  • 1.20 oz (34 g); 3.7 oz (105 g) (1)
  • 1.3 lb (0.6 kg) (6)
  • 1.3 lb;0.6 kg (1)
  • 1.4 lb (0.6 kg) (2)
  • 1.45 lb (1)
  • 1.5 lb (0.7 kg) (2)
  • 1.5 lb;0.68 kg (2)
  • 1.5 lb;0.7 kg (5)
  • 1.5 oz (43 g) (2)
  • 1.5 oz;43 g (2)
  • 1.59 lb (0.72 kg) (1)
  • 1.6 lb (0.7 kg) (2)
  • 1.6 lb (0.8 kg) (1)
  • 1.6 oz (44 g) (1)
  • 1.6 oz (45 g) (12)
  • 1.6 oz;45 g (9)
  • 1.7 lb (0.77 kg) (1)
  • 1.7 lb (0.8 kg) (4)
  • 1.7 oz (48.1 g) (1)
  • 1.76 oz (50 g) (1)
  • 1.8 lb (0.8 kg) (2)
  • 1.8 oz (51 g) (1)
  • 1.8 oz (52.0 g) (1)
  • 1.9 lb (0.8 kg) (2)
  • 1.9 lb (0.9 kg) (1)
  • 1.9 oz (51.0 g) (1)
  • 1.9 oz (54 g) (2)
  • 1.9125 lb (0.87kg) (1)
  • 10 oz (284 g) (1)
  • 10 oz;283 g (1)
  • 10.1 oz (286 g) (4)
  • 10.2 oz (290 g) (2)
  • 10.4 oz (295 g) (3)
  • 10.56 oz (299 g) (1)
  • 10.6 oz (299 g) (2)
  • 10.6 oz (300 kg) (1)
  • 10.7 oz (300 g) (1)
  • 10.7 oz (304 g) (1)
  • 10.8 oz (306 g) (1)
  • 11 oz (314 g) (4)
  • 11.2 oz (318 g) (3)
  • 11.8 oz (335 g) (1)
  • 12 oz (340 g) (1)
  • 13.00 oz (380.0 g) (1)
  • 13.2 lb (6.0 kg) (1)
  • 13.4 oz (381 g) (1)
  • 13.6 oz (386 g) (1)
  • 13.6 oz;386 g (2)
  • 13.8 oz (390 g) (1)
  • 13.9 oz (395 g) (1)
  • 14.4 oz ( 408 g) (1)
  • 14.4 oz (408 g) (4)
  • 14.6 oz;414 g (1)
  • 14.7 oz (417 g) (2)
  • 14.8 oz (420 g) (1)
  • 15 oz (426 g) (1)
  • 15.45 oz (438 g) (1)
  • 15.5 oz (440 g) (1)
  • 15.6 oz (442 g) (1)
  • 15.7 oz (440 g) (1)
  • 16 oz (454 g) (1)
  • 16.9 lb (7.7 kg) (1)
  • 17.6 oz (499 g) (1)
  • 17.9 oz (508 g) (1)
  • 19.0 lb (8.6 kg) (1)
  • 2 lb (1)
  • 2 lb (1 kg) (1)
  • 2.0 lb (0.9 kg) (1)
  • 2.0 lb (0.91 kg) (1)
  • 2.00 oz (57.00 g) (1)
  • 2.1 oz (59 g) (1)
  • 2.1 oz (60 g) (1)
  • 2.1 oz;59 g (2)
  • 2.2 lb (1.0 kg) (1)
  • 2.24 oz (64 g) (1)
  • 2.3 oz (65 g) (1)
  • 2.3 oz (66 g) (1)
  • 2.32 oz (66 g) (1)
  • 2.4 oz (0.07 kg) (1)
  • 2.4 oz (68 g) (2)
  • 2.4 oz;68 g (2)
  • 2.5 lb (1.1 kg) (1)
  • 2.5 oz (71 g) (1)
  • 2.5 oz (72 g) (1)
  • 2.5 oz;71 g (2)
  • 2.6 lb (1.2 kg) (1)
  • 2.6 oz (73 g) (3)
  • 2.6 oz (75 g) (1)
  • 2.7 lb (1.2 kg) (1)
  • 2.7 oz (77 g) (4)
  • 2.8 lb (1.3 kg) (1)
  • 2.9 lb (1.3 kg) (1)
  • 2.9 oz (82 g) (2)
  • 20.8 oz (590 g) (1)
  • 22.4 oz (635 g) (1)
  • 3 oz (86 g) (2)
  • 3.2 oz (90 kg) (1)
  • 3.2 oz (91 g) (22)
  • 3.2 oz;91 g (2)
  • 3.20 oz (92.00 g) (1)
  • 3.3 lb (1.5 kg) (1)
  • 3.3 oz (94 g) (1)
  • 3.31 lb (1.5 kg) (1)
  • 3.4 lb (1.5 kg) (4)
  • 3.46 lb (1.6 kg) (1)
  • 3.5 lb (1.6 kg) (1)
  • 3.5 oz (99 g) (1)
  • 3.60 oz (106.5 g) (1)
  • 3.7 oz (104 g) (2)
  • 3.7 oz;104 g (2)
  • 3.8 oz (108 g) (1)
  • 3.8 oz (109 g) (2)
  • 4 oz (113 g) (17)
  • 4 oz (113.4 g) (3)
  • 4.0 lb (1.8 kg) (1)
  • 4.0 oz (113 g) (4)
  • 4.2 lb (1.9 kg) (1)
  • 4.2 oz (118 g) (2)
  • 4.3 lb (2.0 kg) (2)
  • 4.3 oz (122 g) (1)
  • 4.5 lb (2.0 kg) (2)
  • 4.6 lb (2.1 kg) (1)
  • 4.6 oz (132 g) (5)
  • 4.7 oz (132 g) (1)
  • 4.8 oz (136 g) (13)
  • 4.8 oz;136 g (3)
  • 4.96 oz (141 g) (1)
  • 5 oz (140 g) (1)
  • 5 oz (141.7 g) (1)
  • 5 oz (141.8 g) (2)
  • 5.0 lb (2.3 kg) (1)
  • 5.1 oz (145 g) (3)
  • 5.10 oz (144.2 g) (1)
  • 5.12 oz (145 g) (1)
  • 5.2 oz (147.4 g) (1)
  • 5.3 oz (150 g) (2)
  • 5.3 oz (151 g) (1)
  • 5.4 lb (2.5 kg) (1)
  • 5.4 oz (154 g) (4)
  • 5.5 lb (2.5 kg) (1)
  • 5.50 oz (156.0 g) (1)
  • 5.6 oz (159 g) (8)
  • 5.9 oz (168 g) (1)
  • 5.90 oz (167.0 g) (1)
  • 6.0 lb (2.7 kg) (1)
  • 6.00 oz (170.0 g) (1)
  • 6.1 lb (2.8 kg) (1)
  • 6.1 oz (172 g) (1)
  • 6.1 oz (173 g) (1)
  • 6.2 lb (1)
  • 6.2 oz (177 g) (3)
  • 6.3 lb (2.8 kg) (1)
  • 6.4 oz (181 g) (4)
  • 6.4 oz;181 g (1)
  • 6.40 oz (180.0g) (1)
  • 6.6 lb (3.0 kg) (1)
  • 6.6 oz (186 g) (2)
  • 6.6 oz;187 g (1)
  • 6.8 lb (3.1 kg) (1)
  • 6.83 lb (3.1 lb) (1)
  • 6.9 oz (195 g) (1)
  • 7 oz (200 g) (3)
  • 7.0 lb (3.2 kg) (1)
  • 7.0 oz (187 g) (2)
  • 7.2 oz (204 g) (3)
  • 7.2 oz (204.1 g) (1)
  • 7.2 oz. (204 g) (1)
  • 7.4 oz (209 g) (1)
  • 7.40 oz (210.0 g) (1)
  • 7.5 oz (213 g) (1)
  • 7.6 oz (215 g) (1)
  • 7.7 oz (218 g) (1)
  • 7.9 lb (3.6 kg) (2)
  • 8 oz (227 g) (6)
  • 8.0 lb (3.6 kg) (2)
  • 8.2 oz (231 g) (1)
  • 8.4 oz (237 g) (1)
  • 8.5 oz (241 g) (3)
  • 8.6 oz (245 g) (2)
  • 8.8 oz (249 g) (4)
  • 8.9 lb (4.0 kg) (1)
  • 9 oz (254 g) (1)
  • 9.3 oz (264 g) (1)
  • 9.6 lb (4.3 kg) (1)
  • 9.6 oz (272 g) (4)
  • 9.6 oz;272 g (7)
  • 9.8 oz (277 g) (1)
  • 9.8 oz;278 g (2)
  • 9.9 oz (281 g) (1)
  • Transmitter: 16.5 oz (470 g); Receiver: 11 oz (312 g) (1)
  • Show More...

• Overall Height

  

  • .25" (0.6 cm) (1)
  • 0.172" (0.4 cm) (1)
  • 0.18" (0.5 cm) (1)
  • 0.25'' (0.6 cm) (1)
  • 0.25" (0.6 cm) (2)
  • 0.3" (0.8 cm) (3)
  • 0.342 to 0.99 (0.9 to 2.5 cm) (1)
  • 0.342" to 0.99" (0.9 to 2.5 cm) (1)
  • 0.375 (1 cm)Overall Length4.5 (11.4 cm) (1)
  • 0.406" (1.0 cm) (1)
  • 0.5" (0.6 cm) (1)
  • 0.5" (1.3 cm) (2)
  • 0.50" (1.3 cm) (2)
  • 0.515" (1.3 cm) (1)
  • 0.53" (1.4 cm) (1)
  • 0.55" (1.4 cm) (1)
  • 0.61" (1.5 cm) (1)
  • 0.65" (1.7 cm) (2)
  • 0.69" (1.8 cm) (1)
  • 0.703" (1.8 cm) (1)
  • 0.71" (1.8 cm) (1)
  • 0.72" (1.8 cm) (1)
  • 0.73" (1.9 cm) (1)
  • 0.75" (1.9 cm) (12)
  • 0.75" (2 cm) (3)
  • 0.77" (2 cm) (1)
  • 0.781" (2 cm) (1)
  • 0.79 (2 cm)Overall Length4.33 (11 cm) (1)
  • 0.79" (2 cm) (1)
  • 0.8" (2 cm) (2)
  • 0.82" (2 cm) (1)
  • 0.84" (2.1 cm); 1.25" (3.2 cm) (1)
  • 0.85" (2.2 cm) (1)
  • 0.86" (2.2 cm) (1)
  • 0.88" (2.2 cm) (1)
  • 0.9" (2.2 cm) (1)
  • 0.9" (2.3 cm) (1)
  • 0.93" (2.4 cm) (1)
  • 0.94" (2.4 cm) (1)
  • 0.95" (2.4 cm) (1)
  • 1" (2.5 cm) (2)
  • 1" (2.5 cm) (7)
  • 1" (2.54 cm) (1)
  • 1.0" (2.5 cm) (1)
  • 1.00" (2.5 cm) (1)
  • 1.06" (2.7 cm) (1)
  • 1.07" (2.7 cm) (1)
  • 1.09" (2.8 cm) (1)
  • 1.1" ( 2.8 cm) (1)
  • 1.1" (2.8 cm) (1)
  • 1.16" (2.9 cm) (2)
  • 1.19" (3 cm) (2)
  • 1.2" (3 cm) (3)
  • 1.2" (3.1 cm) (1)
  • 1.24" (3.2 cm) (1)
  • 1.25" (3.2 cm) (1)
  • 1.25" (3.2 cm) (5)
  • 1.3" (3.3 cm) (1)
  • 1.32" (3.4 cm) (1)
  • 1.35" (3.4 cm) (1)
  • 1.38" (3.5 cm) (1)
  • 1.391" (3.5 cm) (1)
  • 1.4" (3.6 cm) (1)
  • 1.41" (3.6 cm) (1)
  • 1.42" (3.6 cm) (5)
  • 1.44" (3.7 cm) (1)
  • 1.45" (3.7 cm) (2)
  • 1.5 (3.8 cm)Overall Length13 (33 cm) (1)
  • 1.5" (3.8 cm) (2)
  • 1.5" (3.8 cm) (8)
  • 1.52" (3.9 cm) (1)
  • 1.55" (3.9 cm) (3)
  • 1.57" (4.0 cm) (2)
  • 1.594" (4.1 cm) (1)
  • 1.6" (4.1 cm) (3)
  • 1.625" (4.1 cm) (1)
  • 1.64" (4.2 cm) (1)
  • 1.7" (4.3 cm) (1)
  • 1.70" (4.3 cm) (1)
  • 1.75 (4.5 cm)Overall Length13 (33 cm) (1)
  • 1.75" (4.5 cm) (1)
  • 1.75" (4.4 cm) (2)
  • 1.75" (4.5 cm) (2)
  • 1.78" (4.5 cm) (2)
  • 1.8" (4.6 cm) (4)
  • 1.83" (4.6 cm) (1)
  • 1.84" (4.7 cm) (1)
  • 1.88" (4.7 cm) (1)
  • 1.9" (4.8 cm) (1)
  • 10" (25.4 cm) (1)
  • 10" (25.4 cm) (4)
  • 10.25" (26 cm) (1)
  • 10.52" (26.7 cm) (1)
  • 12 (30.5 cm)Overall Length11 (27.9 cm) (1)
  • 12" (30.5 cm) (2)
  • 12" (30.5 cm) (2)
  • 12.25" (31.1 cm) (2)
  • 12.25" (31.12 cm) (1)
  • 12.75" (32.4 cm) (1)
  • 13" (33 cm) (1)
  • 13" (33 cm) (1)
  • 13.5" (34.3 cm) (1)
  • 13.75" (34.9 cm) (1)
  • 14" (35.6 cm) (2)
  • 14.5" (36.8 cm) (1)
  • 15" (38.1 cm) (1)
  • 16" (40.6 cm) (2)
  • 16.21" (41.2 cm) (4)
  • 16.25" (41.3 cm) (1)
  • 16.5" (41.9 cm) (1)
  • 17" (43.2 cm) (2)
  • 18.5" (47 cm) (1)
  • 19.25" (48.9 cm) (1)
  • 19.5" (49.5 cm) (1)
  • 19.5" (50 cm) (1)
  • 2 (5.1 cm)Overall Length9.188 (23.3 cm) (1)
  • 2" (5 cm) (1)
  • 2.07" (5.3 cm) (1)
  • 2.08" (5.3 cm) (1)
  • 2.09" (5.3 cm) (1)
  • 2.16" (5.5 cm) (With Transmitter docked in Receiver) (1)
  • 2.188 in;55.6 mm (2)
  • 2.2" (5.6 cm) (1)
  • 2.25" (5.7 cm) (4)
  • 2.48" (6.3 cm) (1)
  • 2.5" (6.4 cm) (1)
  • 2.52 in;64 mm (1)
  • 2.56" (6.5 cm) (1)
  • 2.594" (6.6 cm) (1)
  • 2.625" (6.7 cm) (1)
  • 2.688" (6.8 cm) (1)
  • 2.75" (7 cm) (1)
  • 2.755" (70 cm) (1)
  • 2.797 (7.1 cm)Overall Length4.328 (11 cm) (1)
  • 2.8" (7.1 cm) (1)
  • 2.88" (7.3 cm) (2)
  • 20" (50.8 cm) (5)
  • 25.5" (64.7 cm) (1)
  • 3" (7.6 cm) (2)
  • 3.01" (7.5 cm) (1)
  • 3.08" (7.8 cm) (1)
  • 3.1" (8.0 cm) (1)
  • 3.2" (8.1 cm) (2)
  • 3.313 (8.4 cm)Overall Length3.5 (8.9 cm) (1)
  • 3.43" (8.7 cm) (2)
  • 3.45" (8.8 cm) (1)
  • 3.5 in;88.9 mm (1)
  • 3.5" (1.4 cm) (1)
  • 3.6" (9.4 cm) (1)
  • 3.78" (9.6 cm) (1)
  • 4" (10.2 cm) (1)
  • 4" (10.2 cm) (3)
  • 4.48" (11.4 cm) (1)
  • 4.49" (11.4 cm) (1)
  • 4.5" (1.8 cm) (1)
  • 4.5" (11.4 cm) (2)
  • 4.53" (11.5 cm) (1)
  • 4.7" (11.9 cm) (2)
  • 4.75" (12 cm) (1)
  • 4.9" (12.3 cm) (1)
  • 4.9" (12.4 cm) (1)
  • 43.1" (109.5 cm) (1)
  • 44.1" (112 cm) (1)
  • 5" (12.7 cm) (2)
  • 5.0" (12.8 cm) (1)
  • 5.25" (13.3 cm) (1)
  • 5.4" (13.7 cm) (1)
  • 5.75" (14.6 cm) (1)
  • 52.1" (132.3 cm) (1)
  • 6" (14.9 cm) (1)
  • 6" (15.2 cm) (3)
  • 6.5" (16.5 cm) (11)
  • 6.5" (16.5 cm); 7.5" (19.1 cm) (1)
  • 6.75" (17.2 cm) (2)
  • 7" (17.8 cm) (6)
  • 7" (17.8 cm), 5.5" (14 cm) (2)
  • 7.03" (17.9 cm) (1)
  • 7.13" (18.3 cm) (1)
  • 7.25" (18.4 cm) (2)
  • 7.75" (19.7 cm) (1)
  • 8" (20.3 cm) (1)
  • 8.32" (21.1 cm) (1)
  • 8.32" (21.1 cm); 10.32" (26.2 cm) (1)
  • 8.5" (21.6 cm) (1)
  • 8.7" (22.1 cm) (1)
  • 8.81" (22.4 cm) (1)
  • 9.5" (24.1 cm) (1)
  • 9.5" (24.1 cm) (1)
  • 9.75" (24.8 cm) (2)
  • 9.875" (25.1 cm) (1)
  • Open 1.5" (3.8 cm); Closed 1.906" (4.8 cm) (1)
  • Receiver: 1.84" (4.5 cm); Transmitter: 1.51" (3.9 cm) (1)
  • Show More...

• Diameter

  

  • — (8)
  • 0.25" (0.6 cm) (1)
  • 0.75" (1.2 cm) (1)
  • 0.98" (2.49 cm) (1)
  • 1.3" (3.3 cm) (1)
  • 1.5" (3.8 cm) (1)
  • 1/4" (6.4 mm) (1)
  • 1/4" and 3/16" (6.4 to 4.8 mm) (1)
  • 12 in;305 mm (1)
  • 13" (33 cm) (4)
  • 17 in;432 mm (1)
  • 17" (43.2 cm) (1)
  • 17" (43.2 cm) (1)
  • 2.8" (7.1 cm) (1)
  • 3/16 in;4.8 mm (2)
  • 3/16" (0.5 cm) (1)
  • 5/32 in;4.0 mm (1)
  • 7.5'' (19.1 cm) (1)
  • Fan Cage 7.64" (19.4 cm) (1)
  • Show More...

• Gender

  

  • Mens (1)
  • Unisex (15)
  • Show More...

• Package Quantity

  

  • 1 (8)
  • 1 ct (32)
  • 1 CT;12 PK (1)
  • 1 CT;3 PK (3)
  • 1 CT;4 Pk (2)
  • 1 CT;5 PK (1)
  • 1 CT;6 Pk (10)
  • 10 (3)
  • 10 CT (1)
  • 10 PK;1 CT (1)
  • 100 (2)
  • 12 PK;1 CT (4)
  • 15 (1)
  • 2 (5)
  • 2 Bits (9)
  • 2 PK;1 CT (1)
  • 26 (1)
  • 26 PK (1)
  • 2-Pair (5)
  • 3 (4)
  • 3 CT (2)
  • 4 CT (1)
  • 5 (11)
  • 6 CT (16)
  • 6 PK;1 CT (1)
  • 72 (1)
  • Pair (2)
  • Show More...

• Package Type

  

  • Carrying Case (1)
  • Carton (1)
  • Show More...

• Category Description

  

  • ADHESIVES (1)
  • BITS, BLADES, AND HOLE SAWS (58)
  • FLASHLIGHTS AND BATTERIES (5)
  • Fuses & Fuse Accessories (2)
  • HAND TOOLS (405)
  • Job Site & Safety Apparel (35)
  • SAFETY PRODUCTS (14)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (1)
  • SPLICE KITS (2)
  • TAPE (1)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (57)
  • TOOL BAG/POUCHES (66)
  • TOOL BAG/POUCHES ACCESSORIES (Belts, Pads, etc.) (11)
  • WIRE LUBE, MARKERS, & TIES (5)
  • Show More...

• Color Code

  

  • — (4)
  • BLACK (1)
  • Black/ Yellow (1)
  • BLUE (6)
  • BROWN (4)
  • GREEN (1)
  • ORANGE (8)
  • RED (9)
  • YELLOW (8)
  • Yes (1)
  • Show More...

• Configuration

  

  • — (1)
  • 1 to 1/4-Inch Taper (2)
  • 1-1/8 to 1/4-Inch Taper (1)
  • Hard Hat (3)
  • Hard Hat w/Alkaline Light (1)
  • Hard Hat w/Rechargeable Light (1)
  • Magnetic (6)
  • Mini (5)
  • Non-Magnetic (13)
  • Set with Case (1)
  • Show More...

• Type

  

  • 0.80 oz (22.7 g) (1)
  • 11-in-1 Impact (1)
  • 5-in-1 (1)
  • 7-in-1 Multi-bit (1)
  • AC/DC Current TRMS Clamp (1)
  • Accessory (1)
  • ACCU-BEND™ Conduit and Pipe (2)
  • ADJUSTABLE (1)
  • Adjustable Pump Pliers (1)
  • Adjustable-Length Screwdriver (1)
  • AFCI/GFCI Electrical Battery Operated Outlet Tester (1)
  • All-Purpose (1)
  • All-Purpose Pliers - Crimping (1)
  • All-Purpose Pliers - Spring Loaded (1)
  • Apprentice Tool Set (2)
  • Assisted-Open (1)
  • Auto Ranging Clamp (1)
  • Auto Ranging TRMS Clamp with Temperature (1)
  • Aviation (1)
  • Awl (2)
  • Benfield® Head Iron Conduit Bender (1)
  • Bi Metal (1)
  • Bluetooth® Wireless Speaker (1)
  • BROAD HEAD (1)
  • Bubble with Adjustable Vial (1)
  • BX and Armored Cable Cutter (1)
  • Cable Cutter (8)
  • Carbide Hole Cutter (2)
  • Carbon Monoxide Meter (1)
  • Circuit Tracer (1)
  • CLAMP METER (1)
  • Clamp Meter Kit (1)
  • Class II Laser (1)
  • Click Lock™ Modular (8)
  • Closed Case, Double Sided Single Non-Magnetic Hook (1)
  • Closed Case, Double Sided, Magnetic Hook (3)
  • COMBINATION (1)
  • COMPACT (1)
  • Conduit Bender (1)
  • Conduit Bender Handle (2)
  • Conduit Reamer Drill Head for 1/2", 3/4", 1" (1)
  • Conduit Reamer Replacement Blade Kit (1)
  • Conduit Tool (1)
  • Connector Crimping (1)
  • Cooler (1)
  • Cooling Towel (1)
  • Crimper (1)
  • Cut-Resistant Level 2 Gloves (2)
  • Cut-Resistant Level 4 Gloves (2)
  • Diagonal Cutting Pliers (15)
  • Digital Level (1)
  • Digital Light Meter (1)
  • DIGITAL MULTIMETER (4)
  • Digital Thermometer (2)
  • Digital Voltage and Continuity Tester (1)
  • Double Sided (1)
  • Drill Tap Kit (1)
  • Dual Laser Infrared Thermometer (1)
  • Dual Range (1)
  • Dual Range for NCVT-2P (1)
  • Dual Range with Flashlight (1)
  • Dual Wire Cutter Crimper Stripper (1)
  • Dual-Laser Infrared Thermometer (1)
  • Electricians Tool Set (2)
  • ELECTRONIC (1)
  • Electronic Products (1)
  • Electronic Tester (1)
  • Electronics (1)
  • Extra Capacity Adjustable Wrench (3)
  • Extra Slim Adjustable Wrench (3)
  • Fan with Rechargeable Internal Battery (1)
  • Female to Female (1)
  • Fiberglass Fish Tape (3)
  • Fish Tape (2)
  • Fixed Blade Screwdriver (1)
  • Flashlight (3)
  • Fleece Liner (1)
  • Flex Bit, Wire Placement Tool, and Grip Kit (1)
  • Flexible AC Current Clamp (1)
  • Foam (1)
  • Folding Hex Key (1)
  • Folding Jab Saw (1)
  • Folding Set (3)
  • GFCI and Standard Receptacle Tester (2)
  • GFCI Receptacle Tester (1)
  • HAMMER (1)
  • Hard Side Cooler (1)
  • Headlamp (2)
  • Headlamp with Rechargeable Internal Battery (3)
  • HEAVY DUTY (1)
  • Heavy Duty High Leverage Crimping Pliers (1)
  • Heavy Duty High Leverage Side Cutting/Crimping Pliers (1)
  • Heavy Duty, Shear Cutting (1)
  • Heavy-Duty Alligator Clip (1)
  • HEPA-Close Pleated High Efficiency Particulate Air Filter (1)
  • Hex Driver (4)
  • High Leverage Side Cutting/Connector Crimping Pliers (2)
  • High Leverage Side Cutting/Pulling Pliers (1)
  • High Leverage Stripping Crimping Shearing Side-Cut Hybrid Plier (2)
  • High Tension (1)
  • High-Visibility (1)
  • Hole Cutter Pilot Bit (1)
  • Hollow (6)
  • Hollow Shaft Nut Driver Set (1)
  • HVAC Nylon Tie Tensioning Tools (1)
  • HVAC TRMS Clamp (1)
  • HVAC; Magnetic (1)
  • Ice Pack (1)
  • Impact Flip Socket (3)
  • Impact Rated (2)
  • Impact Socket (1)
  • INSULATED (1)
  • Insulated Screwdriver Set (2)
  • Insulated Staples Stapler (1)
  • Insulated, Interchangeable Blade (1)
  • Iron Bender Head (1)
  • Iron Conduit Bender (3)
  • Ironworker's Pliers (1)
  • Journeyman Combination Pliers (1)
  • Knee Sleeves (4)
  • Knife and Scissors (1)
  • Knife Sharpener (1)
  • Knit Beanie with Fleece Lining (1)
  • Knit Hat (1)
  • Knockout Draw Stud (1)
  • Knockout Punch with Wrench (1)
  • K-Type Banana Plug Adapter (1)
  • K-Type Thermocouple, High Temperature with Adapter (1)
  • Large Cable (2)
  • Laser (1)
  • Laser and Bubble (1)
  • Laser Reflection, Class 2 Laser (1)
  • Lightweight Gel Knee Pad (1)
  • Locknut Wrench Set (1)
  • Lockout with Interlocking Tabs (1)
  • Long Nose Diagonal Cutting Pliers (1)
  • Long Nose Pliers (3)
  • Long Nose Side Cutting Pliers (8)
  • MAGNETIC (4)
  • Magnetic Lighted Torpedo Billet (1)
  • Magnetic Multi-Bit Nut Driver (1)
  • Magnetic Multi-Bit Screwdriver (2)
  • Magnetic Multi-Bit Tamperproof Screwdriver (1)
  • Magnetic Wristband (1)
  • Manual Bottle Opener (1)
  • Master Electrician's Torque Wrenches (1)
  • Mini Ratcheting (1)
  • MODbox™ Tool Pouch (3)
  • MODbox™ Accessory (1)
  • MODbox™ Rail Attachment (1)
  • MODbox™ Tool Pouch (1)
  • Multi-Bit Magnetic Screwdriver (1)
  • Multi-Bit Ratcheting Screwdriver (1)
  • Multi-bit Screwdriver (1)
  • Multi-Bit Screwdriver and Nut Driver (1)
  • Multi-Bit Screwdrivers (2)
  • Multi-Tool Wire Stripper (1)
  • NM-B Cable 12/2 and 14/2 (1)
  • Non-Contact (2)
  • Non-Contact Voltage Tester (2)
  • Nut Driver Kit (1)
  • Nut Driver Set (1)
  • Open Jaw Fork Current Meter (1)
  • Padded Strapped Backpack (1)
  • Padded Tool Belt (1)
  • Phone Holder with Belt Clip (6)
  • Pinless Moisture Meter (1)
  • Pocket Infrared Thermometer with Laser and Temperature Probe (1)
  • Pocket Knife (5)
  • Pocket Screwdriver (1)
  • Pole & Tree Climbers Straps (1)
  • Pouch (1)
  • Power Supply (1)
  • Precision (1)
  • Punchdown Kit (1)
  • Quick Connect (1)
  • Ratcheting Cable Cutter (1)
  • Rechargeable Battery (1)
  • Rechargeable LED with Laser (1)
  • Replacement Blade (2)
  • Replacement Blade Set (1)
  • Replacement Blades (1)
  • Replacement Tap (2)
  • Safety Eyewear (1)
  • Screwdriver Set (4)
  • Self-Leveling Laser Level (2)
  • Side Cutting Pliers (9)
  • Side Cutting/Crimping (1)
  • Situational Awareness Bluetooth Earmuffs (1)
  • Slim-Tip Insulated Screwdriver (1)
  • Slotted Screw Holding Screwdriver Sizes 3/16", 1/4", 5/16" (1)
  • Slotted Screwdriver (1)
  • Socket Wrench Set (1)
  • Soft Side Cooler (1)
  • Soft Sided (4)
  • Solid-State, Low Impedance, Electronic Voltage Tester (1)
  • STANDARD (1)
  • Stand-Up (2)
  • Staright-Claw Hammer (1)
  • Steel Fish Tape (1)
  • Step Drill Bit (2)
  • Step Drill Bit Set (1)
  • Straight-Claw Hammer (2)
  • Tamperproof TORX ® (1)
  • Telescoping Magnetic LED (1)
  • Thermal Imager (3)
  • Tool Backpack (4)
  • Tool Bag (1)
  • Tool Kit (1)
  • Tool Pouch (2)
  • Tool Rolling Backpack (1)
  • Torpedo (3)
  • Torque Screwdriver Set (1)
  • Touchscreen (3)
  • Tubing Cutter (2)
  • Twist Rotating Head (1)
  • Twisted Pair, DATA, Voice, LAN, and Coaxial (1)
  • Type 1 (8)
  • UTILITY (2)
  • Voltage Tester Pen (1)
  • Wind Proof Hinged Balaclava (1)
  • Winter Work Gloves (1)
  • Wire Stripper/Cutter (1)
  • Work Gloves (2)
  • Zipper Pouch (1)
  • Show More...

• Voltage

  

  • — (1)
  • 1000V AC/DC (2)
  • 1000V AC; 1000 V DC (1)
  • 1000V AC; 1000V DC (3)
  • 110/125V AC at 50/60Hz in 3-Wire Outlet (2)
  • 12 - 1000V AC (2)
  • 12 to 1000 VAC (1)
  • 12 to 600 V AC/DC (2)
  • 120V AC in 3-Wire Grounded Electrical Outlet (1)
  • 12-1000V AC (1)
  • 125V (1)
  • 135V AC (1)
  • 2 to 600V AC/DC (2)
  • 50 - 1000V AC (2)
  • 600 V AC/DC (3)
  • 600V AC, 1000V DC (1)
  • 600V AC/DC (5)
  • 600V AC; 600 V DC (1)
  • AC Level Indicators: 12V, 24V, 120V, 240V and DC Indicators:1.5V, 9V, 12V, >17-24V (1)
  • AC Level Indicators: 24V, 48V, 120V, 240V; DC Level Indicators: 32V, 64V, 160V, 330V (1)
  • Charging: 5V ± 0.25V (1)
  • External Indicators for 12V, 48V, 120V, 240V, and 480V (1)
  • Low: 50V AC - 1.5kV AC High: 1.5kV AC - 132kV AC (1)
  • Range 1: 12 – 1000V AC; Range 2: 70 – 1000V AC (2)
  • Show More...