Filter Your Results

Conduit Bodies, Outlet Boxes, Covers & Accessories

• Categories
• Boxes & Covers

---

• Product Type

  

  • 1 1/2 FM7 Body (4)
  • 1 1/2 NPT Fem CST Iron Vert/Horz Seal FT (2)
  • 1 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 1 1/2" Pipe/Conduit Clamp, Rigid, 1 1/2", Pre-Asm, HD Gal (2)
  • 1 1/4 FM7 Body (7)
  • 1 1/4 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1 Form 8 LB Fitting (2)
  • 1 Form 8 T Fitting (2)
  • 1 FS Body W/O Cover (2)
  • 1 In FM7 Body (6)
  • 1 NPT Male Al Cord/Cab FTG Neo Bush (3)
  • 1/2 FD Body W/O Cover (2)
  • 1/2 FM7 Body (5)
  • 1/2 FS Body W/O Cover (4)
  • 1/2 In STL L-T CRD&CBL Conn (3)
  • 1/2 In STR Strain RLF Conn (3)
  • 1/2 NPT 90 Deg Cord/Cab FTG Neo Bush (2)
  • 1/2 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1-1/2 Form 8 LB Fitting (2)
  • 1-1/2 Form 8 T Fitting (2)
  • 1-1/4X90 Standard Elbow (2)
  • 2 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 2 FM7 Body (6)
  • 2 Form 8 LB Fitting (2)
  • 2 Form 8 T Fitting (2)
  • 2" Pipe/Conduit Clamp, Rigid, 2", Pre-Asm, HD GLVD (2)
  • 3/4 Coupling (2)
  • 3/4 FS Body W/O Cover (4)
  • 3/4 NPT CST Iron FD BX Two GNG MTG Lugs (2)
  • 3/4 NPT Male Al Cord/Cab FTG Neo Bush (5)
  • 3/4 NPT Male Cord/Cab FTG Neo Bush (2)
  • 3/4 Outlet BX 2 CVR For THRD Rigid/Imc (2)
  • 3/4" Pipe/Conduit Clamp, Rigid, 3/4", Pre-Asm, SSL (2)
  • 3/4X90 Standard Elbow (2)
  • 90 Degree Fitting (2)
  • 90° Connector (17)
  • 90°Connector (17)
  • AC/MC Single Screw Strap Type Connector (5)
  • All-In-One Stud-Mounted and Mud Ring (2)
  • Angular Fitting (7)
  • Austin Energy CT Cabinet (3)
  • Beam Clamp (10)
  • Blank Cover (24)
  • Box Cover (6)
  • Box Extender (4)
  • Box Hanger (2)
  • Box Mounting Bracket (2)
  • Box Mounting BRKT 16 Stud Spacing (2)
  • Bus Drop Support Grip (5)
  • Bushing (3)
  • Cable Connector (7)
  • Cable Gland (7)
  • Cable Support (3)
  • Carpet Plate and Cover (2)
  • Ceiling Box (9)
  • Channel (13)
  • Channel Angle Fitting (4)
  • Channel Beam Clamp (2)
  • Channel Conduit Clamp (17)
  • CHNL, 1 5/8" X 1 5/8", 9/16" X 7/8" Slotted Holes, 12 Ga, 120" (3)
  • CHNL, 13/16" X 1 5/8", 9/16" X 1 1/8" S-Holes, 14 Ga, 240 (2)
  • CHNL, 13/16" X 1 5/8", 9/16" X 7/8" Slotted Holes, 14 Ga, 120" (5)
  • Clamp (2)
  • Clamp-On Entrance Cap (9)
  • Close Up Plug (3)
  • Closure Plug (5)
  • Combination Coupling (3)
  • Compression Butt Splice (2)
  • Conduit Body (115)
  • Conduit Body Cover (9)
  • Conduit Body Gasket (21)
  • Conduit Body Kit (17)
  • Conduit Coupling (29)
  • Conduit Nipple (214)
  • Conduit Outlet Body (67)
  • Conduit Outlet Body Cover (4)
  • Conduit Outlet Box and Cover (3)
  • Conduit Outlet Box with Cover (30)
  • Conduit Seal Body (23)
  • Conduit Support (2)
  • Cord Connector (19)
  • Cord Gland (28)
  • Cord Grip Connector (21)
  • Cord Support Grip (2)
  • Corner Switch Box (4)
  • Coupling (14)
  • Coupling Nut (3)
  • Cover (14)
  • Deep Box (2)
  • Device Box (14)
  • Device Box Cover (7)
  • Device Cover (6)
  • Direct Mount Box (2)
  • Dust Tight Grip (3)
  • Elbow (85)
  • Electrical Box (33)
  • Electrical Switch and Outlet Box (4)
  • Emt Set Screw Coupling (3)
  • EMT Standard Radius Elbow (9)
  • Enclosure Back Panel (2)
  • End Cap (6)
  • Extension (2)
  • Extra Duty In-Use Cover (2)
  • Fan Support Box (2)
  • Fixture Support Box (7)
  • Flat Box Cover (9)
  • Flat Device Cover (3)
  • Flat Tee Plate Fitting (2)
  • Flexible Conduit Connector (5)
  • Flexible Connector (6)
  • Floor Box (6)
  • Floor Box Assembly (5)
  • Floor Box Cover (6)
  • Four Hole Corner Agl, SSL 304 (2)
  • Four Hole Corner Angle (2)
  • Gang Deep Box (15)
  • Grounding Bridge (4)
  • Half-Slot Channel (17)
  • Handy Box Cover (5)
  • Insulated Connector (12)
  • Junction Box (3)
  • Lamp Holder Cover (2)
  • Liquid Tight 45° Connector (19)
  • Liquid Tight 45°Connector (19)
  • Liquid Tight 90° Connector (29)
  • Liquid Tight 90°Connector (34)
  • Liquid Tight Conduit (3)
  • Liquid Tight Connector (4)
  • Liquid Tight Flexible Connector (6)
  • Liquid Tight Straight Connector (48)
  • Liquidtight Conduit Connector (2)
  • Liquidtight Flexible Nonmetallic Conduit (2)
  • Louisiana Entergy CT Cabinet (4)
  • Masonry Box (9)
  • Metallic Liquidtight Fittings (2)
  • Mogul Conduit Body (4)
  • Non Metallic Liquid Tight 90° Connector (3)
  • Non Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic 90° Connector (4)
  • Non-Metallic 90°Connector (4)
  • Non-Metallic Cable Connector (6)
  • Non-Metallic Liquid Tight 90° Connector (3)
  • Non-Metallic Liquid Tight 90°Connector (6)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Liquid Tight Straight Fitting (2)
  • Nonmetallic Liquid-Tight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Conduit Connector (6)
  • Nonmetallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Straight Connector (6)
  • Octagon Box (15)
  • Octagon Box Cover (2)
  • Octagonal Box (11)
  • Old Work Box (8)
  • Old Work Switch and Outlet Box (2)
  • Outlet & Switch Box (3)
  • Outlet Box (63)
  • Outlet Box Assembly (4)
  • Outlet Box Extension Ring (2)
  • Outlet Cover (5)
  • Post Base (8)
  • Post Base 1 5/8" X 1 5/8" CHNL, 6" X 6" X 3 1/2" SQ Ba (2)
  • Post Base 1 5/8" X 1 5/8" CHNL, 8" X 3 1/8" X 3 1/2" Base, (2)
  • Pre-Assembled Pipe Clamp (22)
  • Pro Connector (3)
  • Protective Cover (2)
  • PVC Coated Steel Rigid Conduit Standard Radius Elbow (3)
  • Raised Box Cover (36)
  • Receptacle Cover (3)
  • Retrofit Brace (2)
  • Rework Box (2)
  • Rigid Conduit Body Cover (6)
  • Rigid Conduit Nipple (3)
  • Romex Connector (5)
  • Round Box (2)
  • Round Ceiling Pan (3)
  • Round Plastic Cover Kit (2)
  • Saddle Grip Connector (5)
  • Safety Plate (3)
  • Sealing Locknut (9)
  • Self Closing Receptacle Cover (2)
  • Service Entrance Fitting (5)
  • SH Type Channel (5)
  • Shallow Box (3)
  • Single Eye Bus Drop Grip (2)
  • Slotted Channel (7)
  • Solid Channel (5)
  • Spring Nut (6)
  • Square Box (12)
  • Square Box Cover (3)
  • Square Box Extension Ring (6)
  • Square Cover (25)
  • Square Device Cover (11)
  • Square Outlet Box (3)
  • Square Post Base (2)
  • Square Surface Cover (12)
  • Square Washer (4)
  • Squeeze Connector (16)
  • Stainless Steel Rigid Conduit Body With Cover and Gasket (7)
  • Stainless Steel Slotted Strut (2)
  • Stainless Steel Strut Angle Bracket (2)
  • Stamped Cover (3)
  • Standard Channel (23)
  • Standard Radius Elbow (10)
  • Steel Gang Box (2)
  • Steel Switch Box (26)
  • Straight Wall (8)
  • Strain Relief Connector (11)
  • Strain Relief Cord and Cable Connector (8)
  • Strain Relief Grip (4)
  • Strap (5)
  • Strap Connector (14)
  • Strut Clamp (8)
  • Strut Conduit Clamp (2)
  • Strut Strap (18)
  • Switch & Outlet Box (8)
  • Switch and Receptacle Box (4)
  • Switch Box (19)
  • Switch/Receptacle Box (2)
  • T Box (2)
  • Take-Off Extension (2)
  • Telescoping Screw Gun Bracket (2)
  • Telescoping Strut (2)
  • Thread Rod (4)
  • Threaded Unilet (4)
  • TMC Armored Cable Gland (10)
  • U Bolt (3)
  • Universal Clamp (6)
  • Universal Cone Nut (3)
  • Upright Fitting (4)
  • Utility Box (12)
  • Utility Box Cover (12)
  • Utility Box Extension Ring (2)
  • Weatherproof Box (4)
  • Weatherproof Box Cover (2)
  • Weatherproof Boxes & Extensions (42)
  • Weatherproof Closure Plug (5)
  • Weatherproof Cluster Cover (8)
  • Weatherproof Cover (5)
  • Weatherproof Device Box Cover (2)
  • Weatherproof Device Cover (4)
  • Weatherproof Extension Ring (2)
  • Weatherproof Gang Box (24)
  • Weatherproof In-Use Cover (2)
  • Weatherproof Lampholder Cover (4)
  • Weatherproof Outlet Box (11)
  • Weatherproof While-In-Use Device Box Cover (2)
  • Weatherproof While-In-Use Device Cover (3)
  • Wire Holder (4)
  • Show More...

• Brand

  

  • 96804 (1)
  • Abb Installation Products, Inc (19)
  • Adalet-PLM (2)
  • ALLIED MOULDED (1)
  • Allied Moulded Products (70)
  • Allied Tube (Power Strut) (1)
  • Aluminum (23)
  • American Fittings Corp (18)
  • Amfico (86)
  • Appleton (456)
  • Appleton/Oz Gedney (6)
  • APPOZGCOMM (13)
  • ARLINGTON (111)
  • Arlington Industries (118)
  • Arrow Hart (6)
  • BELL (76)
  • BOLTED FRAMING (12)
  • Bridgeport (155)
  • Bridgeport Fittings (116)
  • CADDY (1)
  • CALBRITE (89)
  • Calpipe Industries, Inc (3)
  • CALPIPE INDUSTRIES, INC. (4)
  • Carlon (93)
  • Carlon / Nutek (1)
  • Carlon(R) (19)
  • Conduit Pipe Products (130)
  • Cooper B-Line/Cable Tray (11)
  • Cooper Crouse-Hinds (1)
  • COOPER WIRING DEVICES (7)
  • Crouse Hinds (2)
  • Crouse-Hinds (32)
  • Eaton (973)
  • EATON B-LINE SERIES (24)
  • EATON CROUSE-HINDS SERIES (583)
  • Eaton Wiring Devices (13)
  • EC-KORNS (92)
  • Ecn/Korns (1)
  • ECN-KORNS (238)
  • Erico, Inc. Eritec-Caddy (11)
  • ERICSON (1)
  • FARMER'S COPPER & INDUST. (1)
  • FASTENERS (3)
  • Flexible Conduit (3)
  • FLEX-STRUT INC. (1)
  • Flextray (1)
  • Haydon Corporation (10)
  • Hoffman (1)
  • Hoffman Enclosures, Inc. (1)
  • Hubbell Lenoir City (10)
  • Hubbell Wiring Device-Kellems (1)
  • Hubbell Wiring Devices (10)
  • Hubbell--Raco (8)
  • HUGH CUNNINGHAM COMPANY (4)
  • Iberville (2)
  • Ideal (2)
  • Kill (2)
  • KILLARK (90)
  • Kindorf (21)
  • KWIKON (1)
  • L & E PRODUCTS (1)
  • LEGRAND-ON-Q (2)
  • LEGRAND-PASS & SEYMOUR (19)
  • LH DOTTIE (17)
  • Meltric (1)
  • MILBANK (1)
  • Mulberry (4)
  • Mulberry Metal (88)
  • Multi Fittings/Kraloy (2)
  • NIEDAX INC. (1)
  • Nsi Industries (9)
  • nVent CADDY (57)
  • nVent ERICO (1)
  • Nvent Hoffman (7)
  • OCAL (7)
  • Oldcastle Infrastructure Inc (26)
  • Orbit Industries Inc. (5)
  • O-Z/GEDNEY (19)
  • PANDUIT (1)
  • Panduit Corporation (1)
  • Pass & Seymour (4)
  • Pass & Seymour/Legrand (6)
  • Pass and Seymour (93)
  • Peco Fasteners (11)
  • Peco Fasteners, Inc. (5)
  • PLASTIBOND (7)
  • POWER-STRUT (1)
  • PVC & Accessories (36)
  • Quazite (11)
  • Rab Lighting (4)
  • Rack-A-Tiers (1)
  • RACO (9)
  • Rectorseal (1)
  • Red Dot (2)
  • REIKER (10)
  • Remke Industries (28)
  • ROBROY (268)
  • Robroy/Ecn Korns (27)
  • Robroy/Plasti-Bond (16)
  • Robroy/Stainless Steel (8)
  • Scepter (7)
  • SNAP 2 IT (8)
  • SOUTHWIRE COMPANY (1)
  • Southwire Rough Electrical Com (7)
  • STANLEY SALES CO LLC (2)
  • Star Teck (2)
  • Steel City (239)
  • STEREN ELECTRONICS INTL (1)
  • SUPERFLEX LTD. (17)
  • Superstrut (141)
  • T&B (1)
  • T&B Fittings (1)
  • T&B Ind Fitting (195)
  • T&B Liquidtight Fittings (5)
  • T&B Rigid Fittings (1)
  • Taym (3)
  • Taymac (55)
  • TAYMAC CORPORATION (2)
  • Teddico/BWF (1)
  • TEXAS GASKET & PACKING CO (18)
  • Thomas & Betts (19)
  • Thomas&Betts-Abb Ins Prod (32)
  • Tiffin Insulators CO. (2)
  • Topaz - Southwire CO LLC (1)
  • Tork(R) (1)
  • Union Box/CVR (2)
  • Unistrut Corp. (32)
  • Unity MFG (2)
  • WIREMOLD (64)
  • WIRING DEVICE-KELLEMS (63)
  • Woodhead (1)
  • Show More...

• Trade Size

  

  • 0 (1)
  • 0.375 (6)
  • 0.5 (64)
  • 0.5 in (14)
  • 0.75 (73)
  • 0.75 in (12)
  • 0-50 (1)
  • 1 (100)
  • 1 1/2 INCH (2)
  • 1 1/4 INCH (2)
  • 1 in (67)
  • 1 in , 27 mm (1)
  • 1 INCH (45)
  • 1 INCH (EMT), 3/4 INCH (RIGID) (1)
  • 1 PH (15)
  • 1 pipe (1)
  • 1.25 (30)
  • 1.25 in (14)
  • 1.5 (43)
  • 1.5 in in (14)
  • 1/2 (19)
  • 1/2 in (99)
  • 1/2 in. (1)
  • 1/2 INCH (35)
  • 1-1/2 (18)
  • 1-1/2 in (51)
  • 1-1/2 in , 41 mm (1)
  • 1-1/2 in;35 mm (1)
  • 1-1/2 INCH (33)
  • 1-1/4 (16)
  • 1-1/4 in (31)
  • 1-1/4 in , 35 mm (1)
  • 1-1/4 in;1-1/2 in (3)
  • 1-1/4 INCH (35)
  • 1-1/4 INCH (EMT), 1 INCH (RIGID) (1)
  • 1-1/4 to 1-1/2 in (1)
  • 1-1/4 TO 1-1/2 INCH (2)
  • 1-1/4 to 3 (1)
  • 2 (57)
  • 2 1/2 INCH (1)
  • 2 A (12)
  • 2 in (71)
  • 2 in , 53 mm (1)
  • 2 INCH (38)
  • 2 pipe (1)
  • 2.5 (13)
  • 2.5 in (1)
  • 2.75 in (1)
  • 2-1/2 (13)
  • 2-1/2 IN (18)
  • 2-1/2 in;3 in (3)
  • 2-1/2 INCH (24)
  • 2-1/2 to 3 in (1)
  • 2-1/2 TO 3 INCH (1)
  • 3 (36)
  • 3 1/2 (1)
  • 3 1/2 INCH (2)
  • 3 in (34)
  • 3 INCH (24)
  • 3 x 2 in (1)
  • 3 x 2 in. (1)
  • 3 x 2-1/2 in. (1)
  • 3.5 (3)
  • 3.5 in (7)
  • 3/4 (17)
  • 3/4 in (128)
  • 3/4 INCH (39)
  • 3/8 (13)
  • 3/8 in (20)
  • 3/8 INCH (1)
  • 3/8/2015 (1)
  • 3-1/2 (6)
  • 3-1/2 in (1)
  • 3-1/2 in;4 in (3)
  • 3-1/2 INCH (21)
  • 3-1/2 to 4 in (2)
  • 3-1/2 TO 4 INCH (1)
  • 31531 (11)
  • 4 (23)
  • 4 in (16)
  • 4 in , 103 mm (1)
  • 4 INCH (29)
  • 4 pipe (1)
  • 5 INCH (3)
  • 6 INCH (3)
  • 7/8 in (2)
  • 798 (10)
  • Show More...

• Body Type

  

  • Conduit (74)
  • Conduit Seal (24)
  • Drawn (1)
  • E (3)
  • Form 35 (13)
  • Form 5 (37)
  • Form 7 (75)
  • Form 8 (4)
  • Form 9 (1)
  • Internally Threaded (1)
  • L (6)
  • LB (9)
  • LBD Mogul (4)
  • SR5 (1)
  • Swedged (1)
  • T (10)
  • TB (2)
  • X (5)
  • XA (1)
  • Show More...

• Connection Type

  

  • 3/4 in Connector (1)
  • 90° (1)
  • Ball to Plain (1)
  • C x C (3)
  • Clamp-On (9)
  • Combination (3)
  • External Threaded (17)
  • F (1)
  • F x C (1)
  • Female (3)
  • Female Threaded (2)
  • FMC (11)
  • Grip (10)
  • Liquidtight (6)
  • Liquid-Tight (6)
  • Male (2)
  • Male x Female (18)
  • Nail-On (1)
  • NPT (9)
  • Push-In (1)
  • Rigid (2)
  • Screw (9)
  • Screw;Strap (11)
  • Screw-In (3)
  • Screw-On (1)
  • Set Screw (3)
  • Single Screw Strap-Type (2)
  • Snap-In (9)
  • Snap-On (2)
  • Squeeze (16)
  • Straight (45)
  • Straight Male (46)
  • Straight Male NPT (9)
  • Tapered Threaded (1)
  • Threaded (274)
  • Threaded Hub (8)
  • Threaded x Push In (7)
  • Threaded x Screw (2)
  • Threaded x Screw-In (11)
  • Threaded/Set Screw (18)
  • U Shaped (1)
  • UNC (10)
  • UNCR (1)
  • Show More...

• Material

  

  • 0.032 Inch Stainless Steel (1)
  • 0.0625 Inch Galvanized Steel (2)
  • 0.094 INCH DIE CAST ALUMINUM (1)
  • 0.094 Inch Heavy Duty Die-Cast Aluminum (1)
  • 0.094 Inch Thick Die-Cast Aluminum (1)
  • 0.094 Inch Thk Die-Cast Aluminum (12)
  • 0.94 Inch Thk Die-Cast Aluminum (2)
  • 14 Gauge Low Carbon Steel (1)
  • 304 Stainless Steel (48)
  • 316 Stainless Steel (74)
  • 316 Stainless Steel (Body, Cover and Screws);Neoprene (Gasket) (1)
  • ABS (1)
  • ABS Injection Molded Plastic (1)
  • Aluminum (446)
  • Aluminum (Body);Copperfree Aluminum (Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (6)
  • Aluminum (Body, Gland Nut, Lock Nut);Steel (Ferrule);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (1)
  • Aluminum Fittings, Galvanized Steel Mesh (4)
  • Aluminum Fittings, Stainless Steel Mesh (7)
  • ALUMINUM PLATE, DIE CAST ZINC LID (1)
  • Aluminum, Cast (1)
  • Aluminum, Copper Free (less than 4/10 of 1%) (56)
  • Aluminum/Copper/Rubber/Stainless Steel (1)
  • Aluminum/Neoprene (8)
  • Aluminum/Neoprene/Steel (2)
  • Antique Bronze plated zinc cover, Antique Bronze plated steel flange (1)
  • Armor Spring Steel (1)
  • ASTM A1011 Grade 33 Steel (1)
  • ASTM A1011 Low Carbon Steel (1)
  • ASTM A1011/A123 Low Carbon Steel (1)
  • ASTM A1018 Steel (1)
  • ASTM A240 14 Gauge 316 Stainless Steel (1)
  • ASTM A240 304 Stainless Steel (3)
  • ASTM A240 316 Stainless Steel (1)
  • ASTM A36/A575/A576/A635/A1011 Steel (1)
  • ASTM A36/A575/A576/A635/A570 Grade 33 Steel (2)
  • ASTM A570 GRADE 33 STEEL (1)
  • ASTM A575/A576/A635/A36/A570 GRADE 33 STEEL (1)
  • ASTM A653 33 STEEL (1)
  • ASTM A653 Grade 33 Low Carbon Steel (1)
  • ASTM A653 Low Carbon Steel (6)
  • ASTM A653/B633 14 Gauge Low Carbon Steel (1)
  • ASTM B633 Steel (1)
  • ASTM E84/D4385 Fiberglass Reinforced Polyester Resin (1)
  • Beige/Tan Fiberglass Reinforced Polyester BMC (3)
  • Blue, Polycarbonate (1)
  • Brass (18)
  • Brass, Plastic (1)
  • Brass/Non-Metallic (1)
  • Brass-Plated (1)
  • Bronze (Bridge);Paintable Plastic (Cover) (1)
  • Bronze, Tin Coated (2)
  • Carbon Steel (5)
  • Cast Bronze (1)
  • Cast Grayloy-Iron (3)
  • Cast Iron (3)
  • Cast Malleable Steel (3)
  • Cast Metal (2)
  • Cast Zinc (1)
  • Cold Rolled High Carbon Steel (1)
  • Cold-Rolled High-Carbon Steel (5)
  • Concrete/Polymer (15)
  • Copper (5)
  • Copper (Conductor) (2)
  • Copperfree (4/10 Of 1 PCT Maximum) Aluminum (7)
  • Copperfree Aluminum (4)
  • Copper-Free Aluminum (183)
  • Die Cast Aluminum (11)
  • Die Cast Metal (2)
  • DIE CAST SMOOTH POWDER COATED ALUMINUM (2)
  • Die Cast Zinc (15)
  • Die-Cast Aluminum (104)
  • Die-Cast Aluminum (Box), Stainless Steel (Mounting Screw) (2)
  • Diecast Copperfree (4/10 Of 1 PCT) Aluminum (1)
  • Die-Cast Copper-Free Aluminum (72)
  • Die-Cast Metal (22)
  • Die-Cast Zinc (61)
  • Die-Cast Zinc and Steel;Non-Metallic (Insulator) (3)
  • Die-Cast Zinc Lid (2)
  • Die-Cast Zinc Lid, Aluminum Base Plate (1)
  • Die-Cast Zinc Lid, Aluminum Plate (3)
  • Die-Cast Zinc Spring Steel;Plastic (Bush) (1)
  • Ductile Iron (3)
  • Ductile Iron/Feraloy (39)
  • Elastomer/Thermoplastic (1)
  • Electrogalvanized Steel (Body/Nut);Natural/Neoprene (Bushing) (13)
  • Electrogalvanized With Aluminum Acrylic Painted Feraloy Iron Alloy (20)
  • Electrostatic Powder Coated Die-Cast Aluminum (1)
  • Electrostatic Powder Coated Die-Cast Aluminum Body, Neoprene Gasket (10)
  • Enamel Painted Aluminum (15)
  • EPDM RUBBER (1)
  • Epoxy Powder Coated Copper Free Aluminum (1)
  • Epoxy Powder Coated Pressure Cast Copper-Free Aluminum (Body), Neoprene/Fiber (Gasket), Stainless Steel (Screw) (1)
  • Feraloy (209)
  • Feraloy Iron (6)
  • Feraloy Iron Alloy (Body And Cover);Neoprene (Gasket ) (4)
  • Feraloy Iron Alloy with Electrogalvanized and Aluminum Acrylic Paint (Body/Gland Nut);Neoprene (Bushing) (4)
  • Feraloy(R) Iron Alloy (1)
  • Feraloy(R) Iron Alloy (Body);Copper-free Aluminum (Cover) (5)
  • Feraloy/Neoprene (7)
  • Feraloy/Neoprene/Steel (1)
  • Ferrous Metal (1)
  • Fiberglass Reinforced Polyester BMC (3)
  • Fiberglass Reinforced Polyester BMC;Carbon Steel (Fastener);Poly Vinyl Chloride (Clamp) (5)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener);Poly Vinyl Chloride (Clamp);Metal (Ear) (2)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener);Poly Vinyl Chloride (Clamp);Metal (Wing Bracket, Ear) (2)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener, Clamp) (1)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener, Clamp);Metal (Ear) (1)
  • Fiberglass Reinforced Polyester BMC;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener, Clamp);Metal (Wing Bracket, Ear) (1)
  • FIBERGLASS REINFORCED THERMOSET POLYESTER (1)
  • Galvanized Steel (40)
  • Galvanized Steel (Strand);Bronze (Equalizer);Aluminum (Eye);Mylar (Tag) (2)
  • Galvanized Steel Mesh for Insulated Cables, Plastic Coated (1)
  • Galvanized Steel/Zinc (1)
  • Glass-Filled Nylon (1)
  • Gray Nylon (6)
  • Grayloy-Iron (48)
  • Halogen Free Polyamide (1)
  • Heavy Duty Die-Cast Metal (2)
  • High Impact Polycarbonate (1)
  • High Impact PVC (1)
  • HOT ROLLED OILED PICKLED ASTM A36/A635/A575/A576/A1008 STEEL (17)
  • HOT ROLLED OILED PICKLED ASTM A366/A570/A575/A576 STEEL (1)
  • HOT ROLLED PICKLED OILED ASTM A575, ASTM A576, ASTM A635, ASTM A36, ASTM A570 33 STEEL (1)
  • Hot Rolled, Pickled and Oiled Plate or Strip Steel (44)
  • Injection Molded Black Polycarbonate (Box), Cast Brass (Cover), Closed Cell Rubber (Gasket), Nitrile (O-Ring), Plated Carbon Steel (Fastener), Galvanized Steel (Dust Plate), Steel (Wing Bracket) (1)
  • Injection Molded Black Polycarbonate (Box), Dark Bronze Plated Cast Brass (Cover), Closed Cell Rubber (Gasket), Nitrile (O-Ring), Plated Carbon Steel (Fastener), Galvanized Steel (Dust Plate), Steel (Wing Bracket) (1)
  • Injection Molded Black Polycarbonate (Box), Nickel Plated Cast Brass (Cover), Closed Cell Rubber (Gasket), Nitrile (O-Ring), Plated Carbon Steel (Fastener), Galvanized Steel (Dust Plate), Steel (Wing Bracket) (2)
  • Injection Molded Glass Reinforced Polyurethane (3)
  • IRON (5)
  • Iron, Malleable (4)
  • Iron/PVC (9)
  • Low Carbon Steel (38)
  • Low-Carbon Steel (62)
  • Machined Aluminum (3)
  • Machined Steel (6)
  • Machined Steel (Body/Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (2)
  • Malleable Iron (355)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Malleable Iron (Body);Steel (Cap, Ferrule);Polypropylene (Sealing Ring) (1)
  • Malleable Iron (Body);Steel (Ferrule, Caps);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Cap);Aluminum (Ferrule);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (29)
  • Malleable Iron (Clamps);Steel (Bolt and Nut) (1)
  • Malleable Iron Body And Nut, Steel Ferrule (3)
  • Malleable Iron Clamp, Steel U-Bolt and Nuts (1)
  • Malleable Iron Clamps, Steel Bolt and Nut (2)
  • Metal (53)
  • Metal (Clad Cable, Conduit Clamp) (1)
  • Metallic (3)
  • METALLIC COVER (2)
  • MILD STEEL (7)
  • Molded Fiberglass Reinforced Polyester (1)
  • MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER (6)
  • Molded Fiberglass Reinforced Thermoset Polyester;Carbon Steel (Fastener);Poly Vinyl Chloride (Clamp) (1)
  • Molded Fiberglass Reinforced Thermoset Polyester;Plated Carbon Steel (Fastener) (3)
  • Molded Fiberglass Reinforced Thermoset Polyester;Plated Carbon Steel (Fastener);PVC (Clamp) (4)
  • Molded Fiberglass Reinforced Thermoset Polyester;Plated Carbon Steel (Nail);PVC (Speed Clamp) (3)
  • Natural Copper Free Aluminum (Body);Neoprene (Grommet);Nylon (Retention Ring) (1)
  • Neoprene (7)
  • Neoprene Rubber (5)
  • Neoprene/Steel (11)
  • Nickel, Plastic (1)
  • Nickel-Plated (1)
  • Non Metallic (1)
  • Non-Metallic (49)
  • Nylon (31)
  • NYLON 6 (1)
  • Nylon 6/6 (2)
  • Nylon 6-6 (1)
  • Paintable Plastic (Trim Plate) (1)
  • Painted Steel (1)
  • Phenolic (1)
  • Plaster (Ear) (1)
  • Plaster (Ring/Mud Ring) (1)
  • Plastic (102)
  • Plastic (Box) (3)
  • Plastic/Zinc (1)
  • Plastic;Steel (Closure) (1)
  • Plated Steel (1)
  • Poly Vinyl Chloride;Carbon Steel (Fastener) (3)
  • Poly Vinyl Chloride;Carbon Steel (Fastener);Galvanized (Snap In Bracket) (1)
  • Poly Vinyl Chloride;Carbon Steel (Fastener);Polycarbonate (Adjustable Mounting Plate) (2)
  • Polyamide 6 (Body, cap);Neoprene (Sealing Ring) (1)
  • Polyamide/Nylon 6.6 (4)
  • Polycarbonate (39)
  • Polycarbonate (Box);Brass (Cover);Closed Cell Rubber (Gasket);Nitrile (O-Ring);Plated Carbon Steel (Fastener);Galvanized Steel (Dust Plate);Nonmetallic (Pop-In Cable Clamp) (1)
  • Polycarbonate and Neoprene Rubber (2)
  • Polycarbonate/Neoprene Rubber (1)
  • Polycarbonate;Carbon Steel (Fastener) (6)
  • Polycarbonate;Carbon Steel (Fastener);Galvanized (Snap In Bracket) (3)
  • Polycarbonate;Galvanized Steel (Bracket);Plated Carbon Steel (Fastener) (1)
  • Polycarbonate;Plated Carbon Steel (Fastener) (1)
  • Polyethylene;Polypropylene;Steel (1)
  • Polypropylene (2)
  • Polyurethane (2)
  • Porcelain (2)
  • Porcelain, Steel (2)
  • Porcelain;Steel (Clip) (1)
  • POWDER COATED DIE CAST ALUMINUM, NEOPRENE GASKET (3)
  • Powder coated metalElectrostatically painted (2)
  • Pregalvanized Steel (2)
  • Pre-Galvanized Steel (15)
  • Pressure Cast Aluminum (8)
  • PVC (110)
  • PVC (Body) Santoprene® (Grommet) Polyethylene (Sealing Ring) Zinc (Locknut) (1)
  • PVC;Galvanized Steel (Bracket) (1)
  • RACO (1)
  • Rubber (1)
  • Rugged Polycarbonate;Synthetic Neoprene Rubber (1)
  • Rugged Uv-Resistant Polycarbonate (1)
  • SAND CAST ALUMINUM (1)
  • Schedule 40 PVC (1)
  • Sheet Aluminum (Cover), Stainless Steel (Screw) (1)
  • Sheet Steel (1)
  • Soft White PVC (1)
  • Spring Steel (1)
  • Stainless Steel (64)
  • Stainless Steel (Mesh);Aluminum (Fitting) (2)
  • Stainless Steel (Strand);Aluminum (Body, Nut);Neoprene (Bushing) (1)
  • Stainless Steel (Strand, Eye, Equalizer);Mylar (Tag) (1)
  • Stamped Aluminum (Cover), Stainless Steel (Mounting Screw) (1)
  • Stamped Copper-Free Aluminum, Stainless Steel Screws (5)
  • Steel (1201)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Steel (Body/Compression Nut/Sleeve);Neoprene (O-Ring);Nylon (Ferrule);Stainless Steel (Wire Mesh) (1)
  • Steel (Box) (2)
  • Steel (Closure);Vinyl (End Cover) (1)
  • Steel (Mesh);Aluminum (Threaded Body);Neoprene (Gasket) (3)
  • Steel And Malleable Iron (1)
  • Steel IN (108)
  • Steel with Zinc Electroplate and Chromate Finish Coat (Body, Gland Nut);Neoprene (Bushing) (24)
  • Steel, Galvanized (1)
  • Steel, Zinc Plated (2)
  • Steel;Polyethylene (1)
  • Steel;Zinc plated Steel (Ground Cones);Thermoplastic Nylon (Seal Rings);Thermoplastic Nylon (Heat Curled Insulators);Malleable Iron (1)
  • Thermoplastic (56)
  • UV-Rated Plastic (47)
  • Zinc (58)
  • Zinc (Bridge);Paintable Plastic (Cover) (2)
  • Zinc (cover), Steel (flange), Plastic (box) (2)
  • Zinc Alloy (2)
  • Zinc alloy body with polyolefin coating (1)
  • Zinc Cast (13)
  • Zinc Chromate Sheet Steel (1)
  • Zinc Die Cast (74)
  • Zinc Die Cast Body with Steel Saddle Clamps and Insulated Throat (1)
  • Zinc Electroplated Chromate Coated Malleable Iron (Body/Gland/Locknut/Ground Cones), Thermoplastic (Sealing Ring/Insulator), Stainless Steel and Santoprene (Sealing Gasket), Steel (Strap), Bright Dipped Copper (Lug) (1)
  • Zinc Electroplated Steel (4)
  • ZINC PLATED STEEL (5)
  • Show More...

• Number Of Gangs

  

  • 1 (208)
  • 1;2 (2)
  • 1-gang (2)
  • 2 (70)
  • 2-gang (2)
  • 3 (12)
  • 3 in (9)
  • 3-gang (1)
  • 4 (16)
  • 5 in (3)
  • Three-gang (1)
  • Two (2)
  • Show More...

• Number Of Hubs

  

  • 1 (29)
  • 2 (110)
  • 3 (38)
  • 3 IN (15)
  • 4 (23)
  • 5 (4)
  • 5 in (7)
  • 6 (2)
  • 7 (4)
  • Show More...

• Hub Size

  

  • 0.5 (72)
  • 0.5/0.75 (1)
  • 0.75 (66)
  • 0.75 in (1)
  • 0.75 in;19.1 mm (1)
  • 1 (102)
  • 1 1/2 INCH (1)
  • 1 in (11)
  • 1 in , 27 mm (2)
  • 1 INCH (8)
  • 1.25 (64)
  • 1.25 in (1)
  • 1.25/1.5 (2)
  • 1.25-1.5 (2)
  • 1.5 (82)
  • 1.5/2 (1)
  • 1/2 in (41)
  • 1/2 in (Tab) (1)
  • 1/2 INCH (10)
  • 1-1/2 in (7)
  • 1-1/2 INCH (6)
  • 1-1/4 in (2)
  • 1-1/4 INCH (6)
  • 2 (83)
  • 2 1/2 INCH (3)
  • 2 in (24)
  • 2 INCH (7)
  • 2.5 (13)
  • 2.5/3 (3)
  • 2.5-3 (4)
  • 2/3 in (1)
  • 2-1/2 in (2)
  • 2-1/2 to 3 in (1)
  • 2-3/4 in (2)
  • 2-3/4 in (Top, Bottom);1-3/4 in (Side) (1)
  • 3 (29)
  • 3 1/2 INCH (1)
  • 3 in (3)
  • 3 INCH (3)
  • 3.5 (9)
  • 3.5 to 4 (2)
  • 3.5/4 (4)
  • 3/4 in (74)
  • 3/4 INCH (20)
  • 4 (13)
  • 4 in (1)
  • 4 INCH (1)
  • 44624 (1)
  • Arlington (1)
  • Feraloy (1)
  • For use with P 64 DU series. (1)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead (2)
  • Used to fasten threaded conduit to unthreaded opening in a box or enclosure. (1)
  • USED TO HAN CONDUIT (1)
  • Show More...

• Special Features

  

  • 1 gang blank cover, weatherproof protection, device mount; installation hardware, gasket, and multi-lingual instructions included (3)
  • 1/2 IN Knockout (4)
  • 1/2" Knockout Saddle-Type Connector with Spring Set Screw;Concrete Tight when Taped (4)
  • 2 gang blank cover, weatherproof protection, device mount; installation hardware, gasket, and multi-lingual instructions included (3)
  • 2 In Center Spacing (22)
  • 2 Piece Union Design (11)
  • 3 holes 1-3/4" dia., 4 holes 1-1/8" dia. (3)
  • 3 In Width X 2-3/8 In Depth X 5 In Height, Load Capacity 1200 Lb, Weight 93 Lb per 100 (3)
  • 3/8 to 1-1/4 In Raised Adjustable (2)
  • 40 mil gray PVC exterior and interior coating (3)
  • 40 mil gray PVC exterior coating - 2 mil red urethane interior coating (247)
  • 40 mil gray PVC exterior coating - 2 mil red urethane interior coating over galvanized threads (14)
  • 40 mil gray PVC exterior coating - 2 mil red urethane interior coating over threads (4)
  • Accepts all standard device covers and tile rings and is available in all box sizes and conduit styles (3)
  • All Springs shall Mechanically Attached to Channel Nut (6)
  • Alloy A380 aluminum, certified zinc alloy and stainless steel springs provide increased corrosion resistance (4)
  • Aluminum construction resists corrosion. Neoprene grommet seals out oil and moisture. Nylon retention ring ensures superior holding power. (12)
  • Aluminum Cord Connector Provides Durable Performance (2)
  • Aluminum Cord Connector Provides Durable Performance;Knurled Finish Makes Them Easy to Handle and Maintain UL Listing by Hand Tighteningul Listing by Hand Tightening;Lightweight Design (10)
  • Aluminum. 316 stainless steel screws. Natural finish. (4)
  • Armoured/Non-Armoured Barrier Gland (4)
  • Available in NPT, PG, Metric or ISO threads. With our without stainless steel wire mesh. (18)
  • Ball Burnished, mirror smooth finish (4)
  • Bolt head is combination slot and hex head for flexibility of attachment (34)
  • Bus Drop Grips are Used as Cable Support;They Relieve any Direct Tension from the Critical Connection and Absorb Vibration and Flexing;Bus Drop Grips are Woven of Galvanized Steel Wire (2)
  • Can be used with both Steel and Wood Stud;Speeds Installation Time (12)
  • Chemical Resistant;For Corrosive Environment;Non-Burning;Non-Dipping Thermoplastic Material (5)
  • Clamp Type Connector (4)
  • Claws provide temporary support for proper positioning until permanently installed (3)
  • Closed Mesh (5)
  • Closure plugs, ground screw, and mounting hardware included (10)
  • Color-Coded Thread Protectors for Easy Identification of Conduit Size (5)
  • Concentric and Eccentric Knockouts;Use in Fire-Rated Assemblies (54)
  • Concrete tight when taped (4)
  • Concrete-Tight (5)
  • Conduit Hubs Have Tapered Threads and Feature Integral Bushings for Protection of Wire Insulation (30)
  • Configuration Type FD, Dimension 2-3/4 In Width X 2-11/16 In Depth X 5-5/32 In Height (3)
  • Configuration Type FDC, Dimension 2-3/4 In Width X 2-11/16 In Depth X 6-1/32 In Height (3)
  • Configuration Type FS, With Mounting Lug and Ground Screw, Dimension 2-3/4 In Width X 1-7/8 In Depth X 5-5/32 In Height (3)
  • Configuration Type FSC, With Mounting Lug and Ground Screw, Dimension 2-3/4 In Width X 1-7/8 In Depth X 6-1/32 In Height (4)
  • Constructional Feature Rain Tight, Oil Tight;Enclosure Rating Class I Div 2 (7)
  • Continuous Thread (3)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (53)
  • Corrosion Resistant (67)
  • Corrosion Resistant;One-Piece Design with Machined Threads;Tapered Interior Seats the Bushing Evenly for a Liquidtight Seal (2)
  • Corrosion Resistant;Weatherproof;Rain Tight;Dust Tight (3)
  • Corrosion-resistant ideal for indoor and outdoor installations; Weatherproof, raintight and dust-tight when used with cast gasketed covers; Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock; Both malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit; Accurately tapped, tapered threads for tight, rigid joints, ground continuity; Internal grounding screws standard; Accommodate wiring devices such as switches and re (19)
  • Cover Openings on an Angle Permitting Conductors to be Pulled Straight Through Hubs from Either Direction;Domed Covers to Permit Easy Conductor Bends (Relieves Strain On Insulation);Cover and Gasket Furnished;Taper Tapped Hubs with Integral Bushings (4)
  • Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance. They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain. They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets. Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2; Class II, Div. 1 & 2; and C (5)
  • Design Load 200 Lb, Includes Combination Recess Hex Head Machine Screw (4)
  • Designed for both interior and exterior, universal aluminum mounting plates (15)
  • Designed for Both Interior and Exterior, Universal Aluminum Mounting Plates;Waterproof (3)
  • Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces (20)
  • Duplex, weatherproof protection, device mount, self-closing lids; installation hardware, gasket, and multi-lingual instructions included (3)
  • Durable die cast aluminum construction. Premium powder coat finish. Includes NBR synthetic rubber gasket. Stamped aluminum cover. Combination head screw. (3)
  • Ears (15)
  • Easier Installation, Greater Performance and Lower Installation Cost (2)
  • Easier Installation;Greater Performance and Lower Installation Cost (16)
  • Easy installation - No tools needed;Save time and money;Removable with a screwdriver (3)
  • Easy Installation;Removal, Reusable (2)
  • Easy to Install;Quick Connect (3)
  • Easy, Push-In Installation (2)
  • Eliminates common connection problems and assures a liquidtight seal against oil, water, dirt and chemicals; The positive, pull out proof seal formed by a STNM connector begins with its deep-threaded ferrule that bites into the inner wall of the conduit; The sleeve separates the STNM series apart from ordinary connectors; The sleeve is held captive within a compression nut that allows it to move freely and self-align with the conduit having a slightly irregular surface or varying wall thickness; The nut ri (10)
  • Enclosure Type Class I Div 2;Constructional Feature Liquid Tight, Rain Tight, Oil Tight, Concrete Tight (2)
  • enhanced angled nails (3)
  • Enhanced Nails for Quick Mounting between Studs (3)
  • Excellent corrosion reisistance (12)
  • Excellent Corrosion Resistance (16)
  • Explosionproof, dust-ignitionproof; Malleable iron bodies have high tensile strength, ductility and provides great resistance to corrosion, impact and shock; Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity; Furnished with copperfree (4/10 of 1 PCT maximum) aluminum cover; Function as sealing fittings when used with sealing covers; Internally threaded body with externally threaded cover; Covers have pry notches for bar or wrench; Accommodate sealing, dome, hub and union (11)
  • Explosionproof, dust-ignitionproof; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity (8)
  • Explosionproof, dust-ignitionproof; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; Concentric ring interlocked design sizes makes possible smaller diameter, allowing use in tighter spaces; UNF unions are used for joining conduit and connecting conduit to enclosures, Facilitates modifications, permits removal of enclosures without turning or removal of conduit (3)
  • Explosionproof;Dust Ignitionproof;Rain Tight (19)
  • Explosionproof;Dust Ignitionproof;Rain Tight;Threaded Cover Openings;Smooth Integral Hub Bushing Protects Conductor Insulation When Pulling (25)
  • Explosionproof;Dust-Ignitionproof;Raintight (3)
  • Explosionproof;Dust-Ignitionproof;Smooth;Rounded Integral Bushing (5)
  • Extra Heavy-Duty Weatherproof Cover Withstand Electrical Device Protection (5)
  • Factory Provided Raised Ground Screw Location (7)
  • Fixture Rated (12)
  • Fixture Rated;Made of Steel (9)
  • For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Di (8)
  • For Two-Hour Fire Rated Walls (5)
  • For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture; Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed; Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension on cable or cord; Steel or Teflon washer reduces friction between gromme (12)
  • For Use With 8-1/2 In X 4 In Sides Of Box (7)
  • Form 7 Condulet Outlet Bodies Approach Conduit in Size For Neat;Compact Installations;Orm 7 Has Exclusive Snaptight and Wedgenut Cover Attachment to Provide Clear;Unobstructed Cover Opening;Conduit Hubs Have Tapered Threads and Feature Integral Bushings (33)
  • Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws (5)
  • Furnished with 2-way Phillips/Slotted Head Screw (27)
  • Furnished with Tri-Drive screw (8)
  • Galvanized steel. 316 stainless steel screws. Natural finish. (5)
  • Gasket (4)
  • HCF (4)
  • Heavy duty die cast zinc, cord flap gasket (10)
  • Heavy Duty Die Cast Zinc, Cord Flap Gasket;Waterproof (14)
  • High Impact Resistant (4)
  • Holes between gangs are spaced on 1-3/16 inch centers (3)
  • Horizontal/Vertical Position (28)
  • Includes captivated Phillips head screws (7)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut (63)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut, With 316 Stainless Steel Hardware (6)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut;Two Piece Construction (17)
  • Includes gasketed cover (6)
  • Includes ground screw with pigtail lead (3)
  • Includes Sealing Washer;Bonds Conduit to Box or Enclosure;Corrosion Resistant Protection from Moisture & Oils;Designed to Protect Against Excessive Vibration (6)
  • Installed NM Cable Connector;Versatile (4)
  • Insulated Throat 105°C (2)
  • Insulator Rated 105 degree C (2)
  • Integral internal spring steel locking tabs fasten cable or conduit. Suitable for maintaining grounding continuity when installed in accordance with NEC. (2)
  • Intermateability UL Listed and CSA Certified interchangeability with competitive products. Suitable for wet locations when used with gaskets. Innovative spring clip design for installation ease and repeat usage. Smooth integral wire bushings protects cabl (22)
  • Kindorf Self Aligning Channel Nuts are Designed to Provide Resistance to Pull Out and Resistance to Side Slip in Excess of the Full Strength of the Channels with Which They are Used (3)
  • Kindorf Straps are Pre-Assembled for Easy Handling and Sorting (4)
  • Large Cable Clamping Range;Liquid Tight Mechanical Grip;Full Length Busing Seal Protects Cable;Extended Pull Out Performance;Corrosion Resistant (3)
  • Largest Wire Fill Capacity in their Class (3)
  • Lightweight, non-metallic, straight or 90 degree, with or without stainless steel wire mesh (3)
  • Liquid Tight and Water Tight Protection (6)
  • Liquid Tight;Oil Tight;Rain Tight;Water Tight (9)
  • Liquid Tight;Strain Relief (8)
  • Liquidtight fittings are used with metallic and non-metallic conduit to seal out water, oil, and dust in applications food processors, beverage & chemical plants, plastics fabricators, machine shops, etc. (16)
  • Machine Tapped Device Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls (12)
  • Machine Tapped Device Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls & Ceilings (3)
  • Machine Tapped Device Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls and Ceilings (4)
  • Machine Tapped Fixture Holes;2 HR Fire Resistive Walls and Ceilings (2)
  • Machine Tapped Fixture Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls and Ceilings (3)
  • Made from 6063 alloy with a maximum Copper content of 0.1 PCT (4)
  • Made of Steel (35)
  • Made of Steel, Welded Construction (9)
  • Made of Steel. Drawn Construction (13)
  • Maximum Flexibility In Tight Applications (3)
  • Molded-In Splined Device Holes;2 HR Fire Resistive Walls (2)
  • Molded-In Splined Device Holes;2 HR Fire Resistive Walls & Ceilings (3)
  • Molded-In Splined Device Holes;2 HR Fire Resistive Walls and Ceilings (3)
  • More Accurate;Quicker to Install and More Economical, because they Save Field Bending Time (5)
  • NC Rolled Threads;Sizes Thru 4" Include Hex Nuts & Plate (3)
  • NEC/CEC - Suitable for use in the following Hazardous Locations:Class I, Division 2 per NEC 501.10(B)(4) (5)
  • Non-Armored Gland (5)
  • Non-Armored Gland, Cord Size 0.125 To 0.250 In (3)
  • Non-Armored Gland, Cord Size 0.875 To 1.000 In (3)
  • Non-Insulated (5)
  • Nylon Cord Connector Resists Most Common Industrial Corrosives;Provides Effective Pullout Protection;Lightweight Design (3)
  • Old Work Box with Quick Click (3)
  • One Hole Strap (3)
  • One Piece Break Apart Strut Clamp for EMT and Rigid Conduit;Includes Thread Impression and Captured Screw (8)
  • One size fits all strut depths (3)
  • One-piece, heavy-duty construction ready to install right out of the box, no need to break apart and reassemble, no screws or bolts to drop (7)
  • Ordinary, Wet, or Dry Locations;Extended Range with Superior Strain Relief (11)
  • O-Z/Gedney fittings are used with liquidtight flexible metal conduit to provide a dependable connection and are suitable for use in wet locations; 4Q fittings have plain throat (non-insulated); Used to secure, ground and seal liquidtight flexible metal conduit, Type LFMC, to boxes and enclosures; Hot dip or mechanically galvanized finish optionally available; Compact, slim diameter with small turning radius; Furnished with locknut and knockout sealing ring; Liquidtight/raintight/oiltight/concretetight; UL (3)
  • Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation (3)
  • Patented Quick-Fit(TM) Keyhole Mounting System Allows Installation in Under a Minute;Includes Attached Gasket and Mounting Hardware;Base Configuration with Patented Knock-Out(TM) Technology for Custom Fitting;Lockable Tab (2)
  • Polyethylene with Steel Retainer (7)
  • Provide strain relief to protect the cord or cable; Watertight/oiltight; UL listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub (7)
  • Provides an economical method of sleeving through (3)
  • Provides positive visual identification and can withstand the harshest environmental conditions. (2)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (30)
  • Provides Secure Cable Termination and Prevents Cable Pullout;Absorbs Longitudinal Stresses Placed on the Point of Termination Caused by Pulling or Bending the Cable;Supplied with Locknut, Nylon Insulated Bushing and Neoprene Gasket to Provide a Dirt and Dust Free Seal;Wide Range, Single Weave Mesh Construction (3)
  • Push-On Installation;No Tools (18)
  • PVC construction for easier installation, greater performance and lower installation cost (5)
  • Quick Installation, Cuts with Utility Knife or PVC Cutter (3)
  • Quick Thread Device Holes;2 HR Fire Resistive Walls (2)
  • Quick/Click Feature Secures Devices Quickly;Threaded Mounting Holes (3)
  • Raintight (7)
  • Raised Ground Screw Location in the Welded Boxes Saves time in Installation (12)
  • Redesigned BB38D Attaches 1/2" to 1" EMT or Flexible Conduit to Metal or Wood Studs;BB38 Attaches MC/AC Cable, 1/2" & 3/4" EMT to Metal or Wood Studs;Eliminates the Need for Offset Bending of Conduit;Aligns Conduit with Standard Box Knockouts;Box Depth 1-1/2 In;One Piece Construction (2)
  • Redesigned to Custom Fit Both 1-1/2 In. and 1-5/8 In. Channels (5)
  • Resists flexing and holds their shape even in the worst applications (3)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, & Common Solvents;Lower Installed Cost;Flammability Classification 94V-2;Temperature Index 125° C (6)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, and Common Solvents;Lower Installed Cost;Molded of Type Nylon 6. Flammability Classification 94v-2:Temperature Index 125°C (6)
  • Reusable;Easy tool-Free Installation (3)
  • Round neoprene gasket (4)
  • Rugged Construction protects Cord from Damage;Compact Design Permits close Spacing of Fittings on panel Applications;Tightening One Nut Creates Watertight Seal;Male Tapered Thread NPT (13)
  • Rugged, Durable Construction Protects Cords and Cables from Damage and Compact Design;Weatherproof Seal on Outer Sheath of Cable (28)
  • Screws concealed under doors (6)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (3)
  • Sealing Sleeves on All Conduit Openings;Superior Corrosion Protection (2)
  • Sealing Sleeves on Both Ends;Molded External Ribs On 1/2" - 4" to Prevent Tool Damage During Assembly;Couplings are Straight Tapped (5)
  • Seals out oil, water, dust, dirt and fumes; High corrosion resistance; Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements; Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground; Polypropylene sealing ring with locknut standard; Suitable for wet locations; Compact design with small turning radius (10)
  • Seals out oil, water, dust, dirt and fumes; High corrosion resistance; Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements; Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground; Polypropylene sealing ring with locknut standard; Suitable for wet locations; Compact design with small turning radius; Steel compression nut (3)
  • Seals out oil, water, dust, dirt and fumes; High corrosion resistance; Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements; Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground; Suitable for wet locations; Compact design with small turning radius; Copperfree (4/10 of 1 PCT of copper or less) aluminum; Full, machined tapered threads (NPT); Machine tool building, motor and transformer termination (4)
  • Seals Out Oil, Water, Dust, Dirt and Fumes;Unique Long Ferrule with More Pronounced Threads Provides Over Four Times Ul Pull-Out Requirements;Ferrule Provides Maximum Surface Contact for Better Sealing and a Continuous, Permanent, Positive Metal-To-Metal Ground;Liquidtight/Raintight/Oiltight;Compact Design with Small Turning Radius (3)
  • Self-closing (2)
  • Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers; Equivalent FM7 and Form 7 units have identical applic (72)
  • Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; High tensile strength and ductility, high corrosion resistance, high impact and shock resistance; Sizes with flat-back design ideal w (33)
  • Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Roomy interiors: more wiring space; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Form 85 copper free aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a h (4)
  • Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Roomy interiors: more wiring space; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Form 85 copperfree aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a hi (5)
  • Simplifying Installation, Reducing Inventory and Labor Costs;NEMA 4 Rated (7)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Easier Wire Pulling and More Room for Sp (2)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Form 35 Malleable Iron Unilets;High Tensile Strength and Ductility;High Corrosion-Resistant (7)
  • Standard closed mesh support grips are designed for loads up to 600 lbs. and vertical runs of no more than 100 ft. They are available in a variety of eye styles and cable ranges for supporting electrical and fiber optic cable, metal rods, and tubing. Closed mesh support grips are used when the end of the cable is accessible. Support grips are woven of corrosion-resistant tinned-bronze wire. (3)
  • Standard Product (28)
  • Strain relief grips (6)
  • Superblue Boxes Combine the Features of the Hard Shell Thermoset Box and the Thermoplastic PVC Style Box to Create a New Rigid Non-Metallic Wiring Box (2)
  • Supplied with Union Hubs, Which Makes it a Compact Assembly;Have a Variety of Hub Arrangements;Covers are Threaded;Mounting Straps are Standard on All Boxes (2)
  • Support grips (4)
  • Sweeping Bend Radius, Angled Cover (6)
  • Tamper resistant, rugged diecast cover, wood floors only (3)
  • Tamper Resistant;Rugged Diecast Cover (2)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 70 cu. in. (3)
  • The Maximum Number of Support and Framing Applications can be Constructed with a Minimum Amount of Labor and Pieces (25)
  • The metal body of zinc fittings bonds to the metal (3)
  • The Smooth Inner Surface Ensures that Cables and Conductors Can Be Fed Through Very Easily (3)
  • Threaded Hubs (17)
  • Threaded hubs (NPT). (4)
  • Three .5 in outlets, weatherproof protection; installation hardware, gasket, and multi-lingual instructions included, carded type packaging (3)
  • Two Screw Connector (2)
  • UL Listed for Fan and Fixture Support;Ground Screw Pre-Installed (6)
  • UL Listed for Fan and Fixture Support;Self-Leveling Feet (3)
  • Unique cover provides aesthetic recessed service (3)
  • Unique Wedge-Lok Clip Cover Design Allows Easy Removal Without Damaging The Conduit Body (3)
  • Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body; Approved for use in wet locations; The cover is secured with clips, not screws; Stainless steel screws; Wiring capacity: 9.7 CU-IN as per NEC 314.16(A) (3)
  • Various Types of Pulling, Support and Strain Relief Grips (3)
  • Vertical Position (5)
  • Vertical/Horizontal (3)
  • Watertight Fittings designed for indoor and outdoor applications (16)
  • Watertight Seal on Outer Sheath of Cable;Armoured and TECK Armoured Gland (5)
  • Watertight Seal on Outer Sheath of Cable;Armoured and TECK Armoured Gland and Non-Armoured Barrier (5)
  • Weatherproof (9)
  • Weatherproof NEMA 3R rated, 1.5 inches deep, six threaded outlets, three closure plugs included, reinforced outlets, powder coat finish; installation hardware, gasket, and ground screw provided (2)
  • Weatherproof NEMA 3R rated, 2 inches deep with lugs, five threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (11)
  • Weatherproof NEMA 3R rated, 2 inches deep with lugs, four threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (6)
  • Weatherproof NEMA 3R rated, 2 inches deep with lugs, seven threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (4)
  • Weatherproof NEMA 3R rated, 2 inches deep with lugs, three threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (5)
  • Weatherproof NEMA 3R rated, 2 inches deep with lugs, three threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included; carded type packaging (2)
  • Weatherproof NEMA 3R rated, 2.625 inches deep with lugs, three threaded outlets, two closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (3)
  • Weatherproof NEMA 3R rated, 4 inch round splice box, cast in mounting lugs, five threaded outlets, four closure plugs included, reinforced outlets, powder coat finish, ground screw installed, multi-lingual instructions included (4)
  • Wedge Nut Design Facilitates Installation and Removal;Nuts are Held Captive in Cover;Covers Can be Used with or without Gaskets;Form 7 Covers with Integral Sealing Gaskets are Installed Without the Use of Screws;Reducing Installation Time (22)
  • Wedge-Lok (3)
  • Wedge-Lok Cast Cover (4)
  • Weight 10 Lb per 100 (3)
  • Weight 18 Lb per 100 (3)
  • Weight 24 Lb per 100 (3)
  • Weight 392 Lb per 100 (5)
  • Weight 400 Lb per 100 (4)
  • Weight 46 Lb per 100 (5)
  • Weight 75 Lb per 100 (7)
  • Weight 76 Lb per 100 (4)
  • Weight 84 Lb per 100 (3)
  • Welded/Drawn Construction (6)
  • Width 1-5/8 In, Bolt Size 1/2 In (3)
  • Width 1-5/8 In, Bolt Size 3/8 In (3)
  • Width 1-5/8 In, Bolt Size 5/16 In (3)
  • With 1/2 And 21/32 IN Conduit Knockouts, Nonmetallic Sheathed CL 26 Cable Clamps (4)
  • With 14 To 4 AWG Aluminum Grounding Lug (20)
  • With 8 To 1/0 AWG Aluminum Grounding Lug (4)
  • With Cover (11)
  • With Cover and Neoprene Gasket (32)
  • With Cover, Cover Opening Diameter 2 In (8)
  • With Cover, Cover Opening Diameter 3 In (12)
  • With Cover, Cover Opening Diameter 3-5/8 In (5)
  • With Cover, Cover Opening Diameter 5 In (9)
  • With Drain, Vertical Position (31)
  • With Neoprene Integral Gasket (17)
  • With Weatherproof Horizontal Cover, Bug Plug (5)
  • Wood & Steel Stud Bracket Boxes with Quick Click (3)
  • Show More...

• Length

  

  • 0.81 in;20.6 mm (4)
  • 0.872 in (2)
  • 0.88 in;22.4 mm (2)
  • 0.94 in;23.9 mm (2)
  • 1 (3)
  • 1 in (7)
  • 1.2 (2)
  • 1.2 in (2)
  • 1.250 in (4)
  • 1.31 in (3)
  • 1.338 in;33.99 mm (6)
  • 1.41 in (3)
  • 1.43 in (2)
  • 1.48 in (2)
  • 1.5 in (3)
  • 1.625 in (6)
  • 1.63 in (3)
  • 1/2 in (2)
  • 10 (43)
  • 10 A (9)
  • 10 Foot (3)
  • 10 ft (31)
  • 10 ft;3.05 m (4)
  • 10 INCH (25)
  • 10.17 (3)
  • 10.2 (6)
  • 10.20 in;259.1 mm (2)
  • 10.25 (3)
  • 10.5 (7)
  • 10.56 (3)
  • 10.67 (4)
  • 10.71 (6)
  • 101.6 mm (21)
  • 10-1/2 (8)
  • 10-1/32 (3)
  • 10-3/8 (4)
  • 11 (3)
  • 11.19 (3)
  • 11.5 (5)
  • 11.875 (2)
  • 1-1/16 in (4)
  • 1-1/2 INCH (5)
  • 1-1/4 in (3)
  • 1-1/8 in (10)
  • 11-3/4 (2)
  • 12 (3)
  • 12 INCH (24)
  • 12.3 (3)
  • 12.4375 in (2)
  • 120 INCH (8)
  • 1-21/32 in;42.1 mm (3)
  • 12-1/4 (3)
  • 12-11/16 (2)
  • 1-25/32 in (3)
  • 13.04 (4)
  • 13.14 (4)
  • 13.19 (2)
  • 13.27 (4)
  • 13.6 (3)
  • 13.87 (3)
  • 1-3/4 in (6)
  • 1-3/8 in (4)
  • 1-3/8 in (Strap Center point Length) (2)
  • 13-1/2 (4)
  • 13-3/4 (3)
  • 15 (6)
  • 15.12 (2)
  • 1-5/16 in (16)
  • 1-5/8 (4)
  • 1-5/8 in (4)
  • 16.25 (4)
  • 1-7/8 in (3)
  • 1-7/8 in;47.6 mm (3)
  • 17-7/8 (4)
  • 1-9/16 in (3)
  • 2 (3)
  • 2 A (6)
  • 2 in (11)
  • 2 INCH (17)
  • 2.063 in (5)
  • 2.25 in (2)
  • 2.331 in (2)
  • 2.375 in (3)
  • 2.376 in (4)
  • 2.625 in (Gland) (3)
  • 2.75 in (3)
  • 2.781 (3)
  • 2.84375 (4)
  • 2.92 in;74.2 mm (2)
  • 20 (15)
  • 20 Foot (3)
  • 20 ft (5)
  • 2-1/2 in (4)
  • 2-1/2 INCH (6)
  • 2-1/4 in (6)
  • 2-1/8 in (3)
  • 2-23/32 in;69.1 mm (4)
  • 2-3/8 (3)
  • 2-3/8 in (7)
  • 2-5/16 in (6)
  • 2-5/8 in (3)
  • 3 in (43)
  • 3 INCH (16)
  • 3.001 in (2)
  • 3.126 in (2)
  • 3.438 in (3)
  • 3.5 in (6)
  • 3.688 (2)
  • 3.69 in;93.6 mm (2)
  • 3.69 in;93.7 mm (3)
  • 3.75 in (13)
  • 3.79 in (2)
  • 3/4 in (3)
  • 30.5 m (3)
  • 3-1/2 (8)
  • 3-1/2 in;88.9 mm (3)
  • 3-1/2 INCH (4)
  • 3-1/4 in;82.6 mm (5)
  • 31531 (7)
  • 3-3/4 in (14)
  • 3-3/4 in;95.3 mm (3)
  • 4 (5)
  • 4 in (92)
  • 4 in;101.5 mm (2)
  • 4 in;101.6 mm (24)
  • 4 INCH (25)
  • 4.125 in round (5)
  • 4.25 in (9)
  • 4.40 in;111.8 mm (2)
  • 4.5 (5)
  • 4.5 in (3)
  • 4.50 in (10)
  • 4.56 (6)
  • 4.5625 (3)
  • 4.5625 in (3)
  • 4.59 in (3)
  • 4.63 (3)
  • 4.63 in (10)
  • 4.655 (2)
  • 4.68 (8)
  • 4.82 in;122.4 mm (2)
  • 4.934 (3)
  • 4.937 (2)
  • 4-1/2 in;114.3 mm (3)
  • 4-1/8 in (5)
  • 4-11/16 in (10)
  • 4-11/16 in;119.063 mm (6)
  • 4-15/16 in (3)
  • 4-9/16 (3)
  • 5 (9)
  • 5 A (9)
  • 5 in (4)
  • 5 INCH (14)
  • 5.07 in;128.8 mm (2)
  • 5.1 (3)
  • 5.1875 in (4)
  • 5.19 (8)
  • 5.34 in (3)
  • 5.37 (3)
  • 5.37 in (4)
  • 5.38 (9)
  • 5.5 (3)
  • 5.51 (2)
  • 5.625 in (2)
  • 5.63 (3)
  • 5.8 in (3)
  • 5.94 (3)
  • 5.94 in (2)
  • 5.98 (6)
  • 5/8 in (3)
  • 5-1/2 in (4)
  • 5-1/4 (3)
  • 5-11/16 (4)
  • 5-11/16 in (4)
  • 5-13/16 in (3)
  • 51869 (9)
  • 5-3/16 (3)
  • 5-3/8 (8)
  • 5-3/8 in (2)
  • 5-9/16 (3)
  • 6 (30)
  • 6 in (17)
  • 6 in;152.4 mm (4)
  • 6 INCH (25)
  • 6.2 in (3)
  • 6.20 IN (3)
  • 6.25 in (3)
  • 6.31 (5)
  • 6.35 (3)
  • 6.5 (3)
  • 6.69 (5)
  • 6-1/2 (10)
  • 6-1/4 (15)
  • 6-1/8 in (3)
  • 6-15/32 In (3)
  • 6-3/32 In (3)
  • 6-9/32 In (4)
  • 7 (9)
  • 7 in (6)
  • 7.012 (3)
  • 7.04 (4)
  • 7.05 in (5)
  • 7.125 in (3)
  • 7.13 (8)
  • 7.25 in (5)
  • 7.44 (6)
  • 7.51 (4)
  • 7.75 (4)
  • 7.78 (4)
  • 7.79 (4)
  • 7.87 in (4)
  • 7/8 in (3)
  • 7-1/2 in (3)
  • 7-1/4 (5)
  • 7-1/4 in (4)
  • 7-1/4 in;184.1 mm (2)
  • 7-1/8 in (5)
  • 7-3/4 In (3)
  • 7-5/16 In (5)
  • 7-5/8 in (2)
  • 7-7/16 In (3)
  • 798 (10)
  • 8 (8)
  • 8 Each (9)
  • 8 INCH (20)
  • 8.12 in (9)
  • 8.125 in (3)
  • 8.13 (6)
  • 8.1875 in (4)
  • 8.19 (12)
  • 8.45 (3)
  • 8.45 In (5)
  • 8.67 (3)
  • 8.82 (3)
  • 8-1/4 in (3)
  • 8-1/8 (3)
  • 8-3/16 In (3)
  • 9 (11)
  • 9.1875 in (3)
  • 9.19 (8)
  • 9.31 (4)
  • 9.94 (3)
  • 9-1/8 In (3)
  • 9-3/16 in (6)
  • 9-5/16 in (2)
  • For Used To Cover Malleable Iron Conduit Body Opening (18)
  • lag bolt (7)
  • Light Commercial, Residential, Restroom (3)
  • RAB Lighting (3)
  • Rating Plates;Circuit Board and Component Tracking (3)
  • Show More...

• Width

  

  • 0.25 (7)
  • 0.42 in;10.7 mm (1)
  • 0.5 (3)
  • 0.625 (2)
  • 0.75 (2)
  • 0.785 in;19.9 mm (7)
  • 0.81 in (1)
  • 0.827 (2)
  • 1 (6)
  • 1 in (4)
  • 1.053 (2)
  • 1.31 (5)
  • 1.31 in;33.3 mm (2)
  • 1.33 (1)
  • 1.338 in;33.99 mm (3)
  • 1.34 (2)
  • 1.34 in (3)
  • 1.375 (6)
  • 1.375 in (4)
  • 1.38 (2)
  • 1.38 in (2)
  • 1.5 (6)
  • 1.5 in (9)
  • 1.53 in (2)
  • 1.53 in;38.9 mm (2)
  • 1.56 (4)
  • 1.56 in (3)
  • 1.5625 (8)
  • 1.575 (2)
  • 1.625 (74)
  • 1.625 in (7)
  • 1.64 in (2)
  • 1.7 in (2)
  • 1.74 (2)
  • 1.75 (15)
  • 1.75 in (3)
  • 1.770 (1)
  • 1.8 (3)
  • 1.8 in (2)
  • 1.81 (3)
  • 1.812 (2)
  • 1.88 (2)
  • 1.9 in (4)
  • 101.6 mm (21)
  • 11 (3)
  • 1-1/2 in (5)
  • 1-1/4 in (9)
  • 1-1/4 in;31.7 mm (1)
  • 1-13/16 in (3)
  • 1-15/16 in (7)
  • 119.063 mm (2)
  • 13 (2)
  • 1-3/16 in (1)
  • 13/16 in;20.6 mm (1)
  • 1-3/4 in (2)
  • 1-5/8 in (5)
  • 1-5/8 in;41.3 mm (4)
  • 1-5/8 INCH (20)
  • 17 (4)
  • 1-7/8 in (2)
  • 2 (22)
  • 2 in (40)
  • 2.04 in (2)
  • 2.044 (1)
  • 2.05 (8)
  • 2.06 (3)
  • 2.06 in;52.2 mm (2)
  • 2.06 in;52.3 mm (3)
  • 2.097 (1)
  • 2.106 (2)
  • 2.11 in;53.594 mm (1)
  • 2.12 (1)
  • 2.125 in (5)
  • 2.15 (4)
  • 2.15625 (3)
  • 2.1875 (9)
  • 2.1875 in (2)
  • 2.19 (5)
  • 2.25 (11)
  • 2.25 in (16)
  • 2.25 in;57 mm (2)
  • 2.25 in;57.2 mm (1)
  • 2.26 in;57.3 mm (1)
  • 2.28 in (3)
  • 2.30 in;58.4 mm (1)
  • 2.3125 (3)
  • 2.375 (3)
  • 2.38 (2)
  • 2.4 (1)
  • 2.4375 (6)
  • 2.4375 in (3)
  • 2.44 (9)
  • 2.49 (9)
  • 2.49 in;63.2 mm (2)
  • 2.5 (6)
  • 2.53 (1)
  • 2.56 (4)
  • 2.5625 in (3)
  • 2.6 (5)
  • 2.6 in (3)
  • 2.625 (9)
  • 2.63 (3)
  • 2.65 (4)
  • 2.67 (2)
  • 2.68 (2)
  • 2.75 (17)
  • 2.75 in (7)
  • 2.75 INCH (8)
  • 2.8 (2)
  • 2.805 (3)
  • 2.81 (12)
  • 2.81 in (2)
  • 2.82 in (3)
  • 2.83 (2)
  • 2.83 in (2)
  • 2.850 (2)
  • 2.86 in (9)
  • 2.865 (2)
  • 2.88 (3)
  • 2.9 in;73.7 mm (1)
  • 2.92 in;74 mm (1)
  • 2.93 (2)
  • 2-1/2 in (5)
  • 2-1/2 in;63.5 mm (1)
  • 2-1/4 INCH (2)
  • 2-1/8 in (24)
  • 2-1/8 in (Box) (5)
  • 2-27/32 in (1)
  • 2-3/4 in (2)
  • 2-3/8 in (3)
  • 2-3/8 in;60.3 mm (1)
  • 24 (4)
  • 2-5/16 in (4)
  • 2-7/16 in (3)
  • 3 (27)
  • 3 in (15)
  • 3 in;7.62 cm (2)
  • 3 in;76.2 mm (1)
  • 3.1 (5)
  • 3.12 (3)
  • 3.12 in (2)
  • 3.125 in (3)
  • 3.13 (2)
  • 3.1875 (3)
  • 3.19 (6)
  • 3.21875 (1)
  • 3.31 (1)
  • 3.4375 (3)
  • 3.48 (2)
  • 3.5 (31)
  • 3.5 in (2)
  • 3.51 in (3)
  • 3.53 in;89.7 mm (2)
  • 3.54 (1)
  • 3.56 (2)
  • 3.56 in;90.424 mm (1)
  • 3.5625 (3)
  • 3.585 (1)
  • 3.65 (2)
  • 3.69 in;93.6 mm (2)
  • 3.75 (5)
  • 3.750 in (2)
  • 3.83 (6)
  • 3.83 in (2)
  • 3/8 (4)
  • 30 (2)
  • 3-1/16 in (2)
  • 3-1/2 in (17)
  • 3-1/2 in;88.9 mm (4)
  • 3-1/4 in (6)
  • 3-11/16 in;93.6 mm (1)
  • 32 (2)
  • 3-3/16 in (1)
  • 3-5/8 in;92.075 mm (1)
  • 3-7/16 in (2)
  • 3-9/16 in (14)
  • 4 (16)
  • 4 in (58)
  • 4 in;101.5 mm (2)
  • 4 in;101.6 mm (23)
  • 4 INCH (5)
  • 4.02 (2)
  • 4.020 (2)
  • 4.06 (4)
  • 4.100 (2)
  • 4.12 (5)
  • 4.125 (10)
  • 4.13 (3)
  • 4.19 (2)
  • 4.203 (5)
  • 4.23 in (1)
  • 4.25 (8)
  • 4.31 (2)
  • 4.31 in (2)
  • 4.36 in;110.7 mm (1)
  • 4.44 in (2)
  • 4.5 (22)
  • 4.5 in (3)
  • 4.5 INCH (9)
  • 4.50 in (8)
  • 4.511 (1)
  • 4.625 in (2)
  • 4.69 (2)
  • 4.7 (1)
  • 4.71 (2)
  • 4.934 (2)
  • 4-1/2 in (2)
  • 4-1/2 in;114.3 mm (1)
  • 4-1/8 in (4)
  • 4-11/16 in (10)
  • 4-11/16 in;119.063 mm (6)
  • 4-5/8 in (2)
  • 5 (15)
  • 5.12 in (2)
  • 5.16 in (2)
  • 5.18 (1)
  • 5.1875 in (1)
  • 5.25 (4)
  • 5.375 (2)
  • 5.42 (6)
  • 5.5 (2)
  • 5.700 in (2)
  • 5.71 (3)
  • 5.75 (10)
  • 5.750 in (2)
  • 5.87 (3)
  • 5/8 in (1)
  • 5-3/4 in (9)
  • 5-3/4 Inch (2)
  • 5-5/8 in (3)
  • 6 (8)
  • 6 in (Base);3-5/16 (Post) in (1)
  • 6 in;152.4 mm (5)
  • 6.05 (2)
  • 6.156 in (2)
  • 6.25 (2)
  • 6.4 (2)
  • 6.625 (2)
  • 6.650 (1)
  • 6.9 (1)
  • 6.9375 (2)
  • 64 mm (1)
  • 65 mm (1)
  • 7.125 (2)
  • 7.186 (2)
  • 7.21 (1)
  • 7.375 (2)
  • 9 in (2)
  • 9.058 (3)
  • 9-5/16 Inch (2)
  • Show More...

• Height

  

  • 0.238 in;6.1 mm (3)
  • 0.259 (2)
  • 0.299 (2)
  • 0.312 (2)
  • 0.35 (2)
  • 0.358 in;9.1 mm (4)
  • 0.375 (2)
  • 0.461 (2)
  • 0.55 in;13.97 mm (1)
  • 0.673 in;17.1 mm (2)
  • 0.75 (1)
  • 1 (9)
  • 1 in (4)
  • 1.250 in (2)
  • 1.31 (1)
  • 1.34 (2)
  • 1.37 (5)
  • 1.375 (6)
  • 1.38 (3)
  • 1.4 (3)
  • 1.4375 (2)
  • 1.5 (2)
  • 1.5 in (6)
  • 1.6 in;40.5 mm (1)
  • 1.625 (8)
  • 1.63 (3)
  • 1.64 (2)
  • 1.64 in;41.7 mm (3)
  • 1.6875 (3)
  • 1.69 (2)
  • 1.7 (4)
  • 1.72 (1)
  • 1.8 (2)
  • 1.8 in (1)
  • 1.825 in (2)
  • 1.875 (10)
  • 1.88 (4)
  • 1.88 in;47.8 mm (3)
  • 1.9 (5)
  • 1.9375 (3)
  • 1.97 (2)
  • 1/2 in (21)
  • 1/2 in;12.7 mm (13)
  • 10-1/8 in (2)
  • 11.875 (2)
  • 1-1/2 (2)
  • 1-1/2 in (31)
  • 1-1/2 in;38.1 mm (15)
  • 1-1/2;38.1 mm (1)
  • 1-1/4 in (2)
  • 1-13/16 in (3)
  • 12 (3)
  • 13/16 in (6)
  • 13/16 in;20.6 mm (1)
  • 13/16 INCH (7)
  • 1-3/4 (8)
  • 1-5/8 in (22)
  • 1-5/8 in;41.3 mm (8)
  • 1-5/8 INCH (7)
  • 16 ga (Thickness) (2)
  • 1-7/8 in (6)
  • 18 (2)
  • 2 (25)
  • 2 in (15)
  • 2.02 (2)
  • 2.05 (3)
  • 2.05 in (2)
  • 2.09 in (9)
  • 2.14 (3)
  • 2.1875 in (2)
  • 2.24 in (8)
  • 2.25 (16)
  • 2.25 in (5)
  • 2.28 in (1)
  • 2.30 in;58.4 mm (1)
  • 2.31 (5)
  • 2.31 in (2)
  • 2.3125 (5)
  • 2.32 (2)
  • 2.33 (2)
  • 2.4 in;61 mm (1)
  • 2.40625 (2)
  • 2.4375 (2)
  • 2.4375 in (3)
  • 2.5 (5)
  • 2.55 in;64.9 mm (1)
  • 2.56 (7)
  • 2.5625 (5)
  • 2.6 (5)
  • 2.625 (2)
  • 2.625 in (2)
  • 2.65 (2)
  • 2.65 in (4)
  • 2.67 (1)
  • 2.7 in;68.6 mm (1)
  • 2.71 in (4)
  • 2.73 (5)
  • 2.74 in;69.5 mm (1)
  • 2.74 in;69.7 mm (1)
  • 2.75 (15)
  • 2.75 in (5)
  • 2.78 in;70.7 mm (1)
  • 2.78125 (4)
  • 2.8125 (5)
  • 2.83 (5)
  • 2.83 in;71.8 mm (1)
  • 2.84375 (2)
  • 2.85 (4)
  • 2.87 in (8)
  • 2.875 (3)
  • 2.875 in (2)
  • 2.88 (4)
  • 2.89 in (1)
  • 2.9 (2)
  • 2.97 (8)
  • 2.98 in;75.6 mm (2)
  • 2-1/2 in (18)
  • 2-1/4 in (8)
  • 2-1/8 in (24)
  • 2-1/8 in;53.975 mm (6)
  • 2-1/8;53.975 mm (4)
  • 2-15/16 in (1)
  • 218 mm (1)
  • 2-3/4 in (8)
  • 24 (2)
  • 2-5/16 in (6)
  • 2-5/16 in;58.7 mm (1)
  • 2-5/16 in;74.5998 mm (1)
  • 3 (17)
  • 3 in (4)
  • 3 INCH (3)
  • 3.04 (1)
  • 3.04 in;77.2 mm (1)
  • 3.05 (1)
  • 3.12 (2)
  • 3.125 (7)
  • 3.13 (5)
  • 3.18 in;80.6 mm (1)
  • 3.1875 (2)
  • 3.25 (4)
  • 3.26 in;82.9 mm (1)
  • 3.31 (6)
  • 3.3125 (2)
  • 3.32 in;84.3 mm (1)
  • 3.34375 (2)
  • 3.38 (3)
  • 3.41 (3)
  • 3.41 in (2)
  • 3.4375 (3)
  • 3.45 in;87.7 mm (1)
  • 3.46875 (2)
  • 3.5 (9)
  • 3.5 in (7)
  • 3.5 in;88.9 mm (1)
  • 3.50 in;88.9 mm (1)
  • 3.55 (1)
  • 3.5625 (4)
  • 3.5625 in (3)
  • 3.59 in;91.2 mm (1)
  • 3.63 (2)
  • 3.65 (5)
  • 3.69 (2)
  • 3.69 in;93.7 mm (1)
  • 3.7 in (2)
  • 3.72 in (2)
  • 3.725 (2)
  • 3.738 (3)
  • 3.74 in (2)
  • 3.75 (2)
  • 3.775 (2)
  • 3.86 (1)
  • 3.88 (2)
  • 3.9 (3)
  • 3/4 in (4)
  • 3-1/2 in (17)
  • 3-1/2 in (Post) (1)
  • 3-1/2 in;88.9 mm (5)
  • 3-1/4 in (6)
  • 3-1/4 in;8.25 cm (2)
  • 3-1/4 in;82.5 mm (1)
  • 3-1/4 INCH (9)
  • 3-11/16 in;93.6498 mm (1)
  • 3-13/16 in (6)
  • 3-15/16 in;100 mm (1)
  • 3-3/4 in (29)
  • 3-3/4 in;95.25 mm (1)
  • 3-3/4 INCH (6)
  • 3-3/8 in;85.7 mm (1)
  • 3-5/8 in;92.075 mm (2)
  • 3-7/16 in;87.3 mm (1)
  • 4 (8)
  • 4 in (6)
  • 4 in (Box) (5)
  • 4 INCH (4)
  • 4.03125 (2)
  • 4.12 (2)
  • 4.125 (2)
  • 4.125 in (2)
  • 4.25 (3)
  • 4.29 (1)
  • 4.31 (2)
  • 4.375 (8)
  • 4.42 (1)
  • 4.5 (4)
  • 4.5 INCH (17)
  • 4.531 (3)
  • 4.59375 (5)
  • 4.63 (2)
  • 4.64 (1)
  • 4.65 (2)
  • 4.655 in (2)
  • 4.71 (1)
  • 4.75 (5)
  • 4.8125 (4)
  • 4.84 (2)
  • 4.934 in (2)
  • 4-1/16 in (4)
  • 4-1/8 in (4)
  • 4-1/8 in;104.8 mm (1)
  • 5 (3)
  • 5.125 (2)
  • 5.25 (2)
  • 5.36 (2)
  • 5.375 (4)
  • 5.4 (2)
  • 5.43 (4)
  • 5.4375 in (2)
  • 5.5 (3)
  • 5.54 in (4)
  • 5.62 (2)
  • 5.625 (4)
  • 5.700 in (2)
  • 5.75 (3)
  • 5.750 in (2)
  • 5.875 (2)
  • 5.88 in (2)
  • 5/8 in (2)
  • 5-1/8 Inch (2)
  • 5-3/4 in (1)
  • 5-3/8 in;136.5 mm (2)
  • 6 (2)
  • 6 in (2)
  • 6.03 in (3)
  • 6.11 (2)
  • 6.12 in (2)
  • 6.125 (2)
  • 6.437 in (2)
  • 6.8125 (1)
  • 6-1/2 in (3)
  • 7.8125 (1)
  • Show More...

• Includes

  

  • (2) Pins (1)
  • (2) Screw (12)
  • Armored Cable (AC)/Metal Clad Cable (MCI, MCI-A, MCC)/Flexible Metal Conduit Clamp (1)
  • Attached Gasket;Mounting Hardware (1)
  • Attached Nails (1)
  • Built-In Roller (3)
  • Captivated Phillips Head Screws (6)
  • Clamp (9)
  • Closure Plug;Ground Screw;Mounting Hardware (11)
  • Cover (27)
  • Cover and Gasket (4)
  • Cover and Gasket Set (1)
  • Cover;Gasket (1)
  • Cover;Nut;Sleeve (2)
  • Entrance Cap (1)
  • FLG3 Wire Hanger;0.080" Galvanized Braided Wire - Toggles (1)
  • Gasket (1)
  • Gasket and Mounting Hardware (2)
  • Gasket;Mounting Hardware (12)
  • Gasket;Mounting Hardware;Installation Instructions (3)
  • Ground Screw (5)
  • Grounding Screw;O-Ring;Cover (1)
  • Inside Pocket (1)
  • Installation Instruction (2)
  • Insulated Bushing (3)
  • Integral Gasket (7)
  • Integral Sealing Gasket;Stainless Steel Screw (3)
  • Internal Ground Screw (2)
  • Internal Ground Screw and O-Ring (1)
  • Neoprene Bushing (13)
  • Neoprene Gasket;Cover;Screws (1)
  • Neoprene O-Ring (4)
  • Non-Metallic Sheathed Cable Clamp (2)
  • Nuts;Screws (11)
  • Screw (1)
  • Set Screw;Locknet (1)
  • Stainless Steel Fastening Screw (5)
  • Stainless Steel Screw (43)
  • Stainless Steel Screw;Nylon Washers and Gasket (7)
  • Stainless Steel Screws (3)
  • Standard Neoprene Bushing (28)
  • Steel Clip (1)
  • Terminal Adapter (1)
  • Show More...

• For Use With

  

  • (2) 0.485 to 0.612 in Cable (1)
  • 0.405 to .610 AC90, ACG90 Cable;Flexible Metal Conduit (1)
  • 0.405 to 0.610 in Steel and Aluminum:MC/HCF/AC NEW MC-PCS MC-PCS HCF, MCI-A, AC90, ACG90 (1)
  • 0.45 to 0.612 in Cable (2)
  • 0.485 to 0.612 in Cable (1)
  • 0.590 to 0.780 in MC/HCF/AC/MC-PCS Cable;0.610 to 0.780 in MCI-A Cable;0.650 to 0.850 in AC90, ACG90 Cable (1)
  • 1/2" and 3/4" Conduit (1)
  • 1-1/4 to 3 in Pipe (1)
  • 14/2 to 10/3 AWG (0.40 in to 0.63 in) Aluminum and Steel AC/MC/MCI-A/HCF;3/8 in Aluminum and Steel FMC/RWFMC (1)
  • 14/2;14/3;12/2 AWG Cable Wire Insulation (1)
  • 16 to 24 in Spans (2)
  • 16 to 24 in Spans;Standard Octagon Electrical Box (1)
  • 16-in-1 Custom Device (1)
  • 18in1 Extra Duty Box (1)
  • 21 Series III/23 Series III/26 Series III/27/51 Series Ii/52 Series Ii/53 Series Ii/54 Series Ii/70 Series III/73 Series III/75 Series III/77 Series III/79 Series III/80 Series III/89 Series Iv/180 Series/712/713/714/715/716/717/725/787/8060a/8062a Conduit Body (1)
  • 3/8 in Wall Board and Plaster;1/2 in Wall Board and Plaster;5/8 in Wall Board and Plaster (2)
  • 4 in Round/Octagonal Box (1)
  • 4 in Square Box Partitions (15)
  • 4 in Square Boxes (1)
  • 4 in Square Electrical Box (1)
  • 4 in Square Outlet Box;One 30 or 50 Amp Dryer;Range Receptacle (1)
  • 4 in Square Outlet Box;One 4-Wire Twist-Lock Single Receptacle (1)
  • 4 in Square Outlet Box;One Duplex Flush Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle and One Duplex Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle and One Toggle Switch (1)
  • 4 in Square Outlet Box;One Single Flush Receptacle (1)
  • 4 in Square Outlet Box;One Toggle Switch (1)
  • 4 in Square Outlet Box;One Toggle Switch and One Duplex Flush Receptacle (1)
  • 4 in Square Outlet Box;Two Duplex Flush Receptacles (1)
  • 4 in Square Outlet Box;Two Ground Fault Receptacles (1)
  • 4 in Square Outlet Box;Two Toggle Switches (1)
  • 4 in. Square and 4-11/16 in. Boxes;1-1/2 in. and 2-1/8 in. Deep (1)
  • 45in1 Extra Duty Box (1)
  • 4-Wire Twist-Lock Single Flush Receptacle (1)
  • 55-in-1 Custom Device (1)
  • 68 and 600 Series Floor Boxes (1)
  • 68 P Floor Box (3)
  • 829PFLRT Cover (1)
  • 880MP Series Rectangular Floor Box (1)
  • 880mp2/880mp Series Rectangular Non Metallic Floor Box (1)
  • 881 Series Round Floor Box (1)
  • 881 Series Round PVC Floor Box (2)
  • A and C Series Channel and Inserts (5)
  • A-1200 & A-1400 Series Channel (1)
  • A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (1)
  • A-1200, B-1200, C-1200, A-1400, B-1400 and B-1402 Series Channels (1)
  • A-1202, A-1402, C-1202 and H-1200 Series Channel (1)
  • AC/MC Cable (10)
  • AC/MC/HCF Cable 10/4 AWG(0.61 in) to 8/3 AWG (0.87 in) (1)
  • AC/MC/MCI-A 14/2 AWG (0.375 in) to 10/3 AWG (0.625 in) HCF/HCFMCI-A 3/8 in FMC and 14/2 to 10/3 AWG NM Cable (1)
  • Adjustable Single and Double Gang Mud Rings (2)
  • Air Plenum (11)
  • Air Plenum;Extension with Switch Box (2)
  • All Kind or F Channels (1)
  • All Standard Devices;Switches;GFCIs;Single Gang Set Back Electrical Box (1)
  • Aluminum and Steel Flex, AC, AC90, MCI, MCI-A Cable (1)
  • Aluminum and Steel Flex, AC, AC90, MCI, MCI-A Cable;HCF Steel and Aluminum Cable (4)
  • Aluminum Interlocking Grounding Metal-Clad Cable (13)
  • Areas Where Physical Damage May Occur (1)
  • B 900;B 905;B 906 and B 907 Series Channel (1)
  • B Series Channel and Inserts (1)
  • B-1400 Series Channel (1)
  • B22 (2)
  • B22 & B24 Channel (2)
  • B22 or B52A (1)
  • B22-A, B, C (2)
  • B52 & B54 Channel (1)
  • Box On Plywood;T-111;Other Flat Surfaces (1)
  • Branch Circuit Wiring for Wet Locations;Damp Locations;Dry Locations (1)
  • Cable Tray (7)
  • Carflex Conduit and Carflex X-Flex Conduit (3)
  • Channel 1-5/8 in (41.3 mm) Height (1)
  • Circuit Wiring (29)
  • Class 2 Wiring of Satellite;Cable TV;Speakers and More (1)
  • Coaxial Network (1)
  • Commercial;Residential;Wood Floors (2)
  • Concrete Box (1)
  • Conduit (58)
  • Conduit Outlet Body (7)
  • Conduit Runs (1)
  • Conduit System (18)
  • Condulet(R) Conduit Body (23)
  • Connect AC/MC/MCI-A/NM-B Cable to Box or Enclosure;12/2 AWG(0.44 in) to 10/3 AWG (0.53 in) For use with HCF/HCFMCI-A (1)
  • Connect MC &AC or 3/8 in Flexible Metal Conduit to box or enclosure;14/2 AWG (0.38 in) to 10/3 AWG (0.61 in)AC/MC/MCI-A/HCF/HCFMCIA (1)
  • Connect Single Round Service Entrance Cable to Box or Enclosure (5)
  • Connecting 14/2 AWG (0.38 in) to 10/3 (.53 in) Armored;Metal Clad Cable to Box or Enclosure MC/MCI-A/HCFMCI-A (1)
  • Connecting Nonmetallic Cable to Box or Enclosure (6)
  • Couple Threaded Rod (1)
  • Display Receptacle (2)
  • Dry Locations;Concrete Tight when Taped (3)
  • Dry-Tite Boxes and Covers Protect Wiring Devices;Switches;Electronic Components and Terminal Blocks in Dry, Damp and Wet Locations (2)
  • Drywall (1)
  • Duplex Flush Receptacle with Spring Cover Mounting BOX (1)
  • Duplex Receptacle (1)
  • Electric Boxes (1)
  • Electrical Box (1)
  • Electrical Box;Siding Block;Bubble Cover Assembly (1)
  • Electrical Boxes (1)
  • Electrical Devices (8)
  • Electrical Non-Metallic Tubing (EMT) or Non-Metallic Sheathed Cable (1)
  • EMT Conduit (4)
  • EMT Conduit;IMC Conduit;Rigid Conduit (4)
  • EMT Conduit;Threaded Rigid and IMC Conduit (1)
  • EMT/Rigid Conduit (8)
  • Fan and Fixture Support (9)
  • Flbc4502 Floor Box (1)
  • Flexible Cord or Bus Drop Cable at Bus Duct (2)
  • Flexible Cords Including Type S, SO, STO, ST, SJ, SJT, SJTO and SVO, Tray Cable Types TC, TC-ER, TC-ER-HLA, ITC, ITC-ER, ITC-HL, PLTC and PLTC-ER Cables Steel/Copper Wire Braided Cable Steel Wire Armoured (28)
  • Flexible Metal Conduit (14)
  • Flexible Metal Conduit;12/3 to 10/3 steel or aluminum MC cable (2)
  • Flexible Type Neoprene;Hypalon and PVC Jacketed Power or Control Cord and Cable (8)
  • Floor Box (6)
  • For 4 in x 2-1/8 in Boxes (4)
  • For Insulated Cable (3)
  • Form35(R) Unilet(R) Conduit Outlet Body (5)
  • Gang Box (2)
  • General Control and Power Cable Applications (2)
  • General Use Snap Switches;Rigid Conduit Body (1)
  • H-132, H-134 Stainless Steel Channel (2)
  • Hazardous Area;Wet Location (25)
  • Hazardous Areas (3)
  • HVAC Equipment (4)
  • Inspection;Pulling and Maintenance (5)
  • Instance Phone;Cable TV;Satellite Dish (1)
  • Interior and Exterior;Gasket to Boxes and Covers (1)
  • Interior and Exterior;Universal Aluminum Mounting Plates (3)
  • In-Wall Use;In-Ceiling Use for Supporting Weights up to up to 6 lbs (1)
  • Jacketed Metal Clad Cable (1)
  • Kind or F Channels (2)
  • Liquid Tight Flexible Metal Conduit (20)
  • Liquidtight Conduit (6)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (3)
  • Liquidtight Flexible Metallic Conduit (42)
  • Liquid-Tight Flexible Metallic Conduit (33)
  • Liquidtight Flexible Non-Metallic Conduit (1)
  • Liquidtight Flexible Non-Metallic Conduit Type A (5)
  • Manual Motor Starter (1)
  • Masonry Box (2)
  • Masonry Wall (4)
  • MC Cable;Fasteners;Stud/Box Fasteners (1)
  • MC/AC Cable (1)
  • Metal-Clad Cable (6)
  • Metal-Clad Cable;Non-Armoured and Tray Cable (4)
  • Metallic and Non Metallic Liquid Tight Conduit (1)
  • Metallic and Non-Metallic "Type B" Liquid Tight Conduit (14)
  • Metallic Connectors (3)
  • Metallic or Nonmetallic Electrical Boxes (2)
  • Metallic Outlet Box (25)
  • Mounting Old Work Switch Boxes in All Types of Wall Materials (1)
  • New and Old Work (5)
  • New Concrete (3)
  • New Stucco Over masonry or Wood Construction (1)
  • NM Cable (3)
  • NM Sheathed Cable (1)
  • Non-Metallic "type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut (1)
  • Non-Metallic Cable (4)
  • Non-Metallic Liquid-Tight Conduit (7)
  • Non-Metallic Liquid-Tight Conduit, Type B Only (4)
  • Nonmetallic Sheathed Cable (1)
  • Non-Metallic Sheathed Cable (55)
  • Non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code (1)
  • Non-Metallic Wiring System (3)
  • On Grade/Below Grade Application;Power;Data;Communications (2)
  • One 20 A Single Receptacle (1)
  • One 30 or 50 Amp Dryer;Range Receptacle (1)
  • One 30 to 50 A Receptacle (1)
  • One 30 to 60 A Receptacle (1)
  • One Duplex Receptacle (1)
  • One Duplex Receptacle;One GFCI Receptacle (1)
  • One Gang Utility Box (5)
  • One GFCI Receptacle (1)
  • One Single Receptacle (1)
  • One Toggle Switch (1)
  • One Toggle Switch;One Duplex Receptacle (1)
  • One Toggle Switch;One GFCI Receptacle (1)
  • Outlet Box (1)
  • Oval Service Entrance Cable;Nonmetallic Sheathed Cable (1)
  • Pipe Conduit (16)
  • Pipe Size 1 in (1)
  • Pipe Size 2 in (1)
  • Pipe Size 3 in (1)
  • Pipe, Conduit, Duct and Cable Tray Around Obstructions (2)
  • Pipe/Rigid Conduit (1)
  • Plaster (3)
  • Portable Cord (6)
  • Portable Cords including S, SO, STO, ST, SJ, SJT, SJTO and SVO (13)
  • Power and Communication Grounding Systems (3)
  • Power or Communications and Data (1)
  • Protection of Electrical;Voice;Data and Video Cables (1)
  • Receptacle (2)
  • Residential;Home Office (1)
  • Retrofit Projects Such as Trapeze Installations;Where Disassembly of the Support System is not Desired (1)
  • Rigid and IMC Conduit to Mounting Surface (1)
  • Rigid Conduit (104)
  • Rigid Conduit and Pipe (1)
  • Rigid Conduit Body (41)
  • Rigid Conduit;IMC Conduit (19)
  • Rigid Steel;Rigid Aluminum and IMC Conduit (9)
  • Rigid Steel;Rigid Aluminum;IMC Conduit (4)
  • Rigid/Imc Conduit (28)
  • Rigid/IMC Conduit;Heavy-Duty Conductors;Pulling Large Conductors;Making Splices and Taps (1)
  • Rigid/IMC Conduit;Pipe and Electric Metal Tubing (17)
  • Rigid/IMC/EMT Conduit (4)
  • Rigid;IMC and EMT conduit (1)
  • Round Floor Box Covers (1)
  • Seals Sections of Conduit Runs from Passage of Vapors;Flame and Gases (1)
  • Sectons (1)
  • Secure and Seal Cords or Cables Entering Enclosures or Race-Ways (1)
  • Series 2, 3, 4, 5 Steel Channel (1)
  • Service Entrance Mast (2)
  • Single Receptacle (1)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/2 AWG (0.475 in) to 12/2 AWG (0.525 AWG) (1)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/3 AWG (0.540 in) to 12/3 AWG (0.590 AWG) (1)
  • Square Boxes (27)
  • Steel Octagon Box (3)
  • Support Metal Clad Cable (1)
  • Supporting AC/MC/FMC;Accomodates Steel and Aluminum AC/MC/FMC;AC/MC/MCIA with an Outer Diameter of 0.425 in (14/2 AWG) to 0.61 in (10/3 AWG) in FMC in 3/8 in Trade Size (1)
  • Supporting Electrical and Fiber Optic Cable;Metal Rods;and Tubing (1)
  • Supports fixtures up to 50 lbs (1)
  • Swimming Pool (1)
  • Switches;Receptacles;Fans;Lights (3)
  • Thin Wall (EMT), IMC, Rigid Conduit or Pipe (6)
  • Threaded Fittings Only (5)
  • Threaded Metal Conduit (7)
  • Threaded Metal Conduit;IMC Conduit (2)
  • Threaded Rigid and IMC Conduit (5)
  • Threaded Rigid Met (1)
  • Threaded Rigid Metal Conduit and IMC (4)
  • Tile and Carpet Applications (4)
  • Tile and Carpet Applications;Doors (1)
  • Tile or Brick (3)
  • To Secure Pipes, Tubes and Hoses for Fluid Conductors (1)
  • Two Duplex Receptacles (1)
  • Two GFCI Receptacles (1)
  • Two Single Flush Receptacles (1)
  • Two Toggle Switches (1)
  • Used to Connect Non-Metallic Cable to Box or Enclosure (4)
  • Utility Box (5)
  • Utility Boxes (7)
  • Utility Pipe (2)
  • Wall Only with Non-Metallic Wiring System (2)
  • Weatherproof Protection (1)
  • Wet Location (1)
  • Wet Location;Damp Location (26)
  • Wet Location;Stainless Conduit (1)
  • Wire Installation (1)
  • Wiring of Enclosures;Power Boxes;Machine Tools;and Power Centers (3)
  • Wood Floor Construction (1)
  • Wood or Metal Stud (1)
  • Show More...

• Application

  

  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (3)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 3/8" thru 3/4" zinc die cast. Insulator rated 105 degree C. (2)
  • 90 Degree Male- Form 2 (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. (2)
  • 90 Degrees fitting with cover for connecting flexible metal conduit to box or enclosure. (2)
  • 90 Degrees fitting with cover used for connecting flexible metal conduit to box or enclosure. (6)
  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • AC/MC (10)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (24)
  • Act As Pull Outlets for Conductors Being Installed (2)
  • Act as pull outlets for conductors being installed, Provide openings for making splices and taps in conductors, Connect conduit sections, Provide taps for branch conduit runs, Provide for access to conductors for maintenance and future, system changes (5)
  • Act as Pull Outlets for Conductors being Installed;Provide Openings for Making Splices and Taps in Conductors;Connect Conduit Sections;Provide Taps for Branch Conduit Runs;Make 90° Bends in Conduit Runs;Provide for Access to Conductors for Maintenance and Future System Changes (63)
  • Act as Pull Outlets for Conductors that are Stiff Due to Large Size or Type of Insulation;Make 90° Bends in Conduit System;Allowing Straight Pull in Either Direction;Provide for Conduit Service Entrance to Buildings;Provide for Conductor Entrance to Motors;Provide Access to Wiring for Maintenance and Future Expansion (4)
  • Allows access to the interior of a conduit system for inspection, pulling and maintenance. (6)
  • Aluminum And Steel Flex AC MC Cable (7)
  • Armored Cable;Metal Clad Cable;MCI-A Cable;Flexible Metallic Conduit to a Box or Enclosure;Dry Appliations (3)
  • Armored/Metal Clad Cable (5)
  • Attaches a full range of EMT, Rigid conduit and cable to strut channels (7)
  • C&I, Water, Communications, Electric Utility (15)
  • Ceiling Box (3)
  • Channel Nuts with Spring designed for use with standard 1-5/8 channels. (3)
  • Clamp on Type For Use With Threaded or Unthreaded EMT or IMC Conduit (2)
  • Clamp type entrance cap for rigid conduit and IMC. 3 holes 1 3/4" dia.; 4 holes 1 1/8" dia. (3)
  • Commercial (29)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (502)