95135 - King

Aluminum to Copper Lug, 300 V, +105 °C Operating Temperature

LCCXF814AL - Panduit

Pan-Lug, Compression Lug, Grounding Application, Copper Conductor Material, 1/4 In For Stud Size, For Use With Flexible, Extra-Flexible, and Code Stranded Copper Conductors , Non-Insulated, #8 Awg Maximum Conductor Size, +90 °C Maximum Operating Temperature, 2000 V Maximum Voltage Rating, 2.10 In Overall Length, 50 PK Package Quantity, Tin Plated to Inhibit Corrosion, Color Coded Barrel, Inspection Window, Beveled Wire Entry, Csa Listed;Rohs Compliant;Ul Listed, Compression Lug Terminal Type, 35 KV Voltage

KV1810RM - Spec-Kon

Insulated Vinyl Ring Terminal For Wire Range 22-16 Stud Size #10, Red, Package Of 1000

PV1010LFD - Panduit

Fork Terminal, Vinyl Insulation Material, Copper Conductor Material, Yellow Insulation Color, 600 V, +221 °F Operating Temperature, 2.15 LB

ST14ABG - Selecta

ST18BG - Selecta

ST19BG - Selecta

ST2BG - Selecta

ST36BG - Selecta

ST8BG - Selecta

00661191126087|0006611|00661191126087|66119112608|12608|ST8BG|Selecta Products ST8BG|Selecta ST8BG|Selectaproducts ST8BG|Selectaproductsinc. ST8BG|Sellecta Products ST8BG

IT010C - Nsi

The Polaris Ito-1/0C Multi-Tap Offset Dual-Side Entry Vision Tap Connector Features 2 Ports Sized For 1/0 - 14 Awg Wires. The Clear Body Allows Users to See Their Conductor Placement and Is Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Incl

R1214 - Nsi

Tin-Plated Copper Bare Ring Terminal Is Non-Insulated and Has A Basic Tongue Type Ring. Used For Wire Termination In Applications With 1/4" Stud and 12-10 Awg. 50 Per Pack

SB1408S - Nsi

The Easy-Twist SB1408S 50-Count Pack Of Steel Crimp Sleeve Wire Connectors Are Designed For Use On Wires In The 14-8 Awg Size Range. The Simple Brass-Plated Sleeve Design Forms Low-Resistance Connections In A Tight Space and Installs Using A Specialized Crimp Tool or Adjustable Pliers. Use Crimp Sleeves to Permanently Connect Wires In Grounding, Uninsulated or Small Motor Applications Where Vibration Resistance Is A Concern.

DNF14250FIL - Panduit

The Vibration Resistant Female Disconnect Is Made Of Brass and Is Tin-Plated. It Is Fully Insulated In A Blue, Nylon Housing. It Has A Tab Size Of 0.250 X 0.032" (6.3 X 0.8 MM) and Supports A Wire Range Of 16-14 Awg (1.5-2.5 MM²). It Is 0.94" (23.9 MM) Long and 0.36" (9.1 MM) Wide. The Disconnect Has A Funnel Entry Barrel Configuration and An Insulation Grip Sleeve Barrel. It Comes In Bottles Of 50.

FSD738D - Panduit

Panduit FSD73-8-D Covered Single Wire Ferrule

FSD776D - Panduit

Panduit FSD77-6-D Covered Single Wire Ferrule

FSD778DSL2 - Panduit

Insulated Ferrules, On Strip, Single Wire Red Din End Sleeve, 18 Awg (1.0MM²), 0.31(8.0MM) Pin Length.

FSD788D - Panduit

Panduit FSD78-8-D Covered Single Wire Ferrule

FSD8212C - Panduit

Panduit FSD81-12-C Covered Single Wire Ferrule

FTD788D - Panduit

Panduit FTD78-8-D Covered Twin Wire Ferrule