Tri-Onic TR-R Current-Limiting Time-Delay Fuses Are Engineered For Overcurrent Protection Of Motors, Transformers, Service Entrance Equipment, Feeders and Branch-Circuits. The Time-Delay Characteristics Of The TR-R Safely Handle Harmless Starting Currents and Inrush Currents Associated With TodayS Motors and Transformers. 250 Volts 15 Amps TR Series.

Power Fuse, Time Delay Fuse Speed, Class RK5 Fuse, 40 A, 250 V Ac;250 V DC, Fiber Glass (Body) Material, 13/16 In Diameter, 3 In Overall Length, Blown Fuse Indicator

Amp-Trap 2000 Time-Delay Atdr Small-Dimension Fuses Provide IEC Type 2 "No Damage" Protection to Your Facility'S Increasingly Sensitive Branch Circuit Components and Small Motors - Minimizing The Risk Of Fault-Related Damage. Atdr Class CC Fuses Deliver The Best Time-Delay Characteristics In Their Class With Excellent Cycling Ability For Small Motor Loads. 600 Volts 20 Amps Atdr Series.

The Most Compact Of The STX Series Offering, The Surge-Trap® Type 1 STXH Meets Requirements For UL1449 Fourth Edition and Is Suitable For Any 120/240VAC Split Phase Application. The STXH Series SPD Features Tpmov® Technology Inside Making It The Safest Product Available In Its Category. Its Compact Size, Performance and Reliability Is Especially For Hvac Applications and Direct Mounting to Air Condition Disconnect Switches., 240/120V, L-N, L-G, Split Phase, Led 50 Ka Per Phase

Tri-Onic TRS-R Current-Limiting Time-Delay Fuses Are Engineered For Overcurrent Protection Of Motors, Transformers, Service Entrance Equipment, Feeders and Branch-Circuits. The Time-Delay Characteristics Of The TRS-R Safely Handle Harmless Starting Currents and Inrush Currents Associated With TodayS Motors and Transformers. 600 Volts 150 Amps TRS Series.

Tri-Onic TRS-R Current-Limiting Time-Delay Fuses Are Engineered For Overcurrent Protection Of Motors, Transformers, Service Entrance Equipment, Feeders and Branch-Circuits. The Time-Delay Characteristics Of The TRS-R Safely Handle Harmless Starting Currents and Inrush Currents Associated With TodayS Motors and Transformers. 600 Volts 60 Amps TRS Series.

Mersen Fuse Reducers Allow The Use Of Lower Rated Fuses In Existing Equipment Having Clips With Higher Ampere Ratings. The Use Of Closer Rated Time-Delay Fuses Can Improve Circuit Protection. For Example, Renewable or One-Time Fuses Feeding A Motor Can Be Replaced With Fuses Sized Closer to The Motor Nameplate Current. Non-Rejection Reducers Will Allow Class H, K or R Fuses to Fit Class H or K Clips. Rejection-Type Reducers Will Allow Only Class R Fuses to Fit Class R Clips or Only Class J Fuses to Fit C

Mersen Fuse Reducers Allow The Use Of Lower Rated Fuses In Existing Equipment Having Clips With Higher Ampere Ratings. The Use Of Closer Rated Time-Delay Fuses Can Improve Circuit Protection. For Example, Renewable or One-Time Fuses Feeding A Motor Can Be Replaced With Fuses Sized Closer to The Motor Nameplate Current. Non-Rejection Reducers Will Allow Class H, K or R Fuses to Fit Class H or K Clips. Rejection-Type Reducers Will Allow Only Class R Fuses to Fit Class R Clips or Only Class J Fuses to Fit C

Amp-Trap 2000 Smartspot Time-Delay A2D-R Fuses Provide IEC Type 2 "No Damage" Protection to Existing Mains, Feeders, and Branch Circuits Serving Motor and Non-Motor Loads. A2D-R Fuses Will Open Fast Enough Under Extreme Fault Conditions For Maximum Short Circuit Protection to Prevent Damage to Motor Starters, Switches, and Other Circuit Components, Yet Also Provide The Time-Delay Needed For Motor In-Rush Currents. A2D-R Fuses Can Be Used to Replace 250V Class H, K or RK5 Fuses Already Installed In The Fiel

Tri-Onic TR-R Current-Limiting Time-Delay Fuses Are Engineered For Overcurrent Protection Of Motors, Transformers, Service Entrance Equipment, Feeders and Branch-Circuits. The Time-Delay Characteristics Of The TR-R Safely Handle Harmless Starting Currents and Inrush Currents Associated With TodayS Motors and Transformers. 250 Volts 0.1 Amps TR Series.

Tri-Onic TR-R Current-Limiting Time-Delay Fuses Are Engineered For Overcurrent Protection Of Motors, Transformers, Service Entrance Equipment, Feeders and Branch-Circuits. The Time-Delay Characteristics Of The TR-R Safely Handle Harmless Starting Currents and Inrush Currents Associated With TodayS Motors and Transformers. 250 Volts 70 Amps TR Series.

One-Time Ot and Otn General Purpose Fuses Provide Low Cost Protection For Feeder and Branch-Circuits Serving Lighting, Heating, and Other Non-Motor Loads. Ot and Otn Fuses Will Safely Interrupt Available Short-Circuit Currents Up to 50, 000 Amperes In All Ratings. Ot and Otn Fuses Are Not Rejection Fuses and Care Should Be Taken to Ensure That Replacement Fuses Do Not Have Lower Interrupting Ratings Than Original Fuses. Otn(15-60) Satisfy The Canadian Electrical Code Requirement For Type P Low Melting-Point

One-Time Ot and Otn General Purpose Fuses Provide Low Cost Protection For Feeder and Branch-Circuits Serving Lighting, Heating, and Other Non-Motor Loads. Ot and Otn Fuses Will Safely Interrupt Available Short-Circuit Currents Up to 50, 000 Amperes In All Ratings. Ot and Otn Fuses Are Not Rejection Fuses and Care Should Be Taken to Ensure That Replacement Fuses Do Not Have Lower Interrupting Ratings Than Original Fuses. Otn(15-60) Satisfy The Canadian Electrical Code Requirement For Type P Low Melting-Point

Mersen Class R Fuseholders Accommodate All Class R Power Fuses. A Choice Of Screw, Pressure Plate, and Box Connectors Connectors Fit A Wide Range Of Stranded or Solid Copper or Aluminum Wire. Insulators Are Either Molded Glass-Filled Polycarbonate (GFPC) or Phenolic With Verified Dielectric Strength In Excess Of 2500V. 30, 60, 100 and 200A Fuseholders Feature A Unique Adder Block to Form Multi-Pole Segmented Blocks Of As Many Poles As Desired. All Fuse Clips Are Made Of High Conductivity Tin-Plated Copper

Mersen Class R Fuseholders Accommodate All Class R Power Fuses. A Choice Of Screw, Pressure Plate, and Box Connectors Connectors Fit A Wide Range Of Stranded or Solid Copper or Aluminum Wire. Insulators Are Either Molded Glass-Filled Polycarbonate (GFPC) or Phenolic With Verified Dielectric Strength In Excess Of 2500V. 30, 60, 100 and 200A Fuseholders Feature A Unique Adder Block to Form Multi-Pole Segmented Blocks Of As Many Poles As Desired. All Fuse Clips Are Made Of High Conductivity Tin-Plated Copper

Mersen Class R Fuseholders Accommodate All Class R Power Fuses. A Choice Of Screw, Pressure Plate, and Box Connectors Fit A Wide Range Of Stranded or Solid Copper or Aluminum Wire. Insulators Are Either Molded Glass-Filled Polycarbonate (GFPC) or Phenolic With Verified Dielectric Strength In Excess Of 2500V. 30, 60, 100 and 200A Fuseholders Feature A Unique Adder Block to Form Multi-Pole Segmented Blocks Of As Many Poles As Desired. All Fuse Clips Are Made Of High Conductivity Tin-Plated Copper 250 Volts 6

Mersen Class R Fuseholders Accommodate All Class R Power Fuses. A Choice Of Screw, Pressure Plate, and Box Connectors Fit A Wide Range Of Stranded or Solid Copper or Aluminum Wire. Insulators Are Either Molded Glass-Filled Polycarbonate (GFPC) or Phenolic With Verified Dielectric Strength In Excess Of 2500V. 30, 60, 100 and 200A Fuseholders Feature A Unique Adder Block to Form Multi-Pole Segmented Blocks Of As Many Poles As Desired. All Fuse Clips Are Made Of High Conductivity Tin-Plated Copper 250 Volts 6

Mersen Class R Fuseholders Accommodate All Class R Power Fuses. A Choice Of Screw, Pressure Plate, and Box Connectors Fit A Wide Range Of Stranded or Solid Copper or Aluminum Wire. Insulators Are Either Molded Glass-Filled Polycarbonate (GFPC) or Phenolic With Verified Dielectric Strength In Excess Of 2500V. 30, 60, 100 and 200A Fuseholders Feature A Unique Adder Block to Form Multi-Pole Segmented Blocks Of As Many Poles As Desired. All Fuse Clips Are Made Of High Conductivity Tin-Plated Copper 250 Volts 1

Mersen Midget Fuse Blocks Accommodate All 30 Ampere 1-1/2 X 13/32 Midget Fuses. A Choice Of Box, Screw, or Pressure-Plate Connectors Fit A Wide Range Of Stranded or Solid Copper Wire. Insulators Are Glass-Filled Polycarbonate (GFPC) With Verified Dielectric Strength In Excess Of 2500V. Fuse Blocks Feature A Unique Adder Block Which Can Be Snapped Onto 1-, 2- or 3-Pole Blocks to Form Multi-Pole Segmented Blocks Of As Many Poles As Desired. All Fuse Clips Are Made Of High Conductivity Tin-Plated Copper Al

Mersen Class T Fuse Blocks Accommodate Class T Fuses Up to 600A. Insulators Are Either Durable Glass-Filled Polycarbonate (GFPC) or Phenolic With Verified Dielectric Strength In Excess Of 2500V 300 Volts 60 Amps 3 Poles Screw Connection.