For Power or Communication Devices In A Single Compartment. For Use With 5507 Series Faceplates, Ortronics Tracjack and Series Ii Modules, Pass and Seymour Activate Series Inserts, and Wiremold Open System Communication Modules. Note: CM-Epla End Plates Are Required When Using Wiremold Communication Modules and Pass and Seymour Activate Inserts. S2-Epl End Plates Are Required When Using Orthonics Series Ii Inserts. to Mount Tracjack Inserts, Use 5507-4TJ or 5507-6TJ Faceplates. White

For Covering Rectangular Decorator Style Devices. White

For Covering Single Receptacles - 1.41" (36MM) Diameter. Ivory

Supports Lengths Of 500 and 700 Series Raceway. White.

Protects Wires From Abrasion. Easily Slips Into Open End Of 700 Series Raceway.

Covers The Seam Where Two Lengths Of 700 Series Raceway Come Together. White

Low-Profile, Two-Piece Raceway With Durable, Textured PVC Ivory or White Finishes. Available In 5' (1.52M) Lengths. Packed 100' (3.05M) Per Carton. Supplied With Wide Adhesive Tape Along Its Entire Length. Ivory

For Covering Joint Where Two Pieces Of 800BAC Series Raceway Cover Come Together. Ivory

800 Series Flat Elbow. For Right Angle Turns On Same Surface. Finish - White

800 Series T Fitting. For Branching Of Raceway Running At Right Angles. Finish - Ivory

800 Series T Fitting. For Branching Of Raceway Running At Right Angles. Finish - White

One-Gang Nonmetallic Carpet Flange. For Ortronics Connectivity Use With 829PFLRT Cover. For Wiremold Open System Connectivity Use With 829PFL Cover. Accepts Ortronics MAB6TJ Tracjack, MAB3S2 Series Ii and Wiremold CM Series Open System Adapters, Sold Separately. Note: Polycarbonate Cover Plates Can Only Be Used With Polycarbonate Flanges. Brown

One-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange, 6" X 5" (152.4MM X 127MM). Accepts Ortronics MAB6TJ Tracjack and MAB3S2 Series Ii Adapters and Wiremold CM Series Open System Inserts, Sold Separately. Note: Ul Listed For Tile, Terrazzo, and Carpet Floors. Brass Covers and Flanges Are Not Interchangeable With Aluminum or Nonmetallic Covers and Flanges. Nonmetallic Covers Are Interchangeable With Aluminum Flanges. Black

800 Series Internal Elbow. For Right Angle Turns Around Internal Corners. Finish - White

800 Series External Elbow. For Right Angle Turns Around External Corners. Finish - White

Two-Gang Nonmetallic Carpet Flange. For Ortronics Connectivity Use With 829PFLRT Cover. For Wiremold Open System Connectivity Use With 829PFL Cover. Accepts Ortronics MAB6TJ Tracjack, MAB3S2 Series Ii and Wiremold CM Series Open System Adapters, Sold Separately. Note: Polycarbonate Cover Plates Can Only Be Used With Polycarbonate Flanges. Brown

Brushed Aluminum Communication Cover Plate. Allows For Up to Four Communication Devices to Be Mounted In A Recessed Position Within The 880S and 880CS Floor Boxes. Has Removable Slides For Cable Egress. Note: Not For Use With 817C, 827C, and 837C Flanges.

Flip Lids. Can Also Be Used With A 106 Type Communication Adapter. Note: Polycarbonate Cover Plates Can Only Be Used With Polycarbonate Flanges. Brown

Three-Gang Brass Combination Carpet and Tile Flange, 6.080" X13.310" (154.4MM X 338.1MM). Accepts Ortronics MAB6TJ Tracjack and MAB3S2 Series Ii, and Wiremold CM Series Open System Adapters, Sold Separately. Note: Brass Cover Plates Can Only Be Used With Brass Flanges. Brushed Aluminum Flanges Come With Beveled Edges.

Three-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange, 6.080" X 13.17" (154.4MM X 335MM). Accepts Ortronics MAB6TJ Tracjack and MAB3S2 Series Ii Adapters and Wiremold CM Series Inserts, Sold Separately. Note: Brass Covers and Flanges Are Not Interchangeable With Aluminum or Nonmetallic Covers and Flanges. Nonmetallic Covers Are Interchangeable With Aluminum Flanges. Black