Filter Your Results

Tools

• Categories
• Tools & Testers
• Tools

---

• Category Description

  

  • ABRASIVES (4)
  • ADHESIVES (95)
  • AEROSOLS (66)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (1)
  • BITS, BLADES, AND HOLE SAWS (620)
  • CLEANING (46)
  • Comp & Mech Lugs and Butt Splices (2)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (1)
  • Datacom Wiring Devices and Accessories (1)
  • EXOTHERMIC GROUNDING PRODUCTS (7)
  • FASTENERS (6)
  • Fire Resistant/Protection Materials (3)
  • FLASHLIGHTS AND BATTERIES (18)
  • Fuses & Fuse Accessories (58)
  • HAND TOOLS (665)
  • HAZARDOUS LOCATION FITTINGS (8)
  • HVACR Chemicals (9)
  • HVACR Install Accessories: Screws, Duct Ties, Duct Sealer, Duct Tapes, PVC... (1)
  • Job Site & Safety Apparel (86)
  • LADDERS (16)
  • Meter Socket Accessories (1)
  • MISC FITTINGS (1)
  • Miscellaneous residential devices (7)
  • Pin & Sleeve Devices (2)
  • POWER TOOL ACCESSORIES (1)
  • POWER TOOLS (52)
  • PULL LINE, ROPE, CARRIERS (45)
  • SAFETY PRODUCTS (18)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (9)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (2)
  • SMOKE DETECTORS (1)
  • SPLICE KITS (1)
  • SPLIT BOLTS (4)
  • STEEL BOXES & COVERS (2)
  • STEEL JUNCTION BOXES (2)
  • TAPE (10)
  • TERMINAL BLOCK ACESSORIES (4)
  • TERMINALS (1)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (70)
  • TOOL BAG/POUCHES (82)
  • TOOL BAG/POUCHES ACCESSORIES (Belts, Pads, etc.) (16)
  • WIRE LUBE, MARKERS, & TIES (21)
  • WIRE NUTS (1)
  • Show More...

• Manufacturer Status

  

  • Inactive (53)
  • Non-Stock (6)
  • Show More...

• Brand

  

  • 3M (16)
  • 3M[T] (1)
  • ALLIANCE SPORTS GROUP LP (1)
  • AMERICAN POLYWATER (5)
  • AMPROBE (3)
  • ANGLO-AMERICAN ENT. CORP. (1)
  • ANTON INTERNATIONAL INC. (1)
  • Appleton (4)
  • Application Tooling (1)
  • ARLINGTON (1)
  • Arlington Industries (3)
  • Automotive (7)
  • Blazestop (1)
  • BOULDER BAG (2)
  • Bridgeport Fittings (2)
  • Buchanan (1)
  • BURNDY (21)
  • Burndy LLC (1)
  • Cementex (2)
  • CHANNELLOCK (9)
  • CLC Workgear (3)
  • COLOR-KEYED (3)
  • Copper (23)
  • CORROSION TECHNOLOGIES (1)
  • CRC (28)
  • CRC Industries, Inc. (24)
  • CRC STA-LUBE (1)
  • Dewalt/Black & Decker (4)
  • E-A-R (2)
  • Eaton (12)
  • EATON CROUSE-HINDS SERIES (7)
  • Edge Eyewear (2)
  • EXTREME COLD (1)
  • FLUKE (30)
  • Fluke Electronics (3)
  • Gardner Bender (3)
  • GREENLEE (94)
  • Greenlee Textron (7)
  • Ideal (174)
  • Ilsco (1)
  • Klein Tools (422)
  • Knipex (15)
  • Knipex Tools (8)
  • L.H. Dottie CO. (15)
  • Legrand On-Q (1)
  • LEN (6)
  • LENOX (46)
  • LENOX TOOLS & ACCESSORIES (6)
  • LH DOTTIE (112)
  • LIFT SAFETY (1)
  • Louisville (12)
  • Louisville Ladder (4)
  • M18(TM) (2)
  • Metaliks (1)
  • METER LOOPS&POWER POLES (1)
  • milwaukee (1)
  • Milwaukee Electric Tool (12)
  • Milwaukee® (560)
  • Minnesota Mining (3M) (27)
  • Morris Products Inc. (1)
  • Nebotools (1)
  • NSi (1)
  • Nsi Industries (2)
  • nVent ERICO (4)
  • O-Z/GEDNEY (1)
  • PANDUIT (1)
  • Panduit Corporation (1)
  • Peco Fasteners (43)
  • Peco Fasteners, Inc. (27)
  • Platinum Tools (4)
  • PVC & Accessories (3)
  • Quest, Series Pro (3)
  • Rack-A-Tiers (63)
  • Rectorseal (83)
  • RIDGE TOOL COMPANY (3)
  • SANTRONICS (2)
  • Satco (1)
  • Scotch-Brite (3)
  • Scotchcast (3)
  • Scotchkote (1)
  • Scotchlok (1)
  • Securefit (1)
  • SELECTA (4)
  • Southwire (26)
  • SOUTHWIRE COMPANY, LLC (1)
  • Specseal (4)
  • SPEED SLOT[R], T3[TM] (2)
  • STA LUBE (2)
  • STI (SPECIFIED TECHNOLOGIES INC) (4)
  • T&B Ind Fitting (2)
  • Tools & Accessories (6)
  • Virtua (1)
  • Westex Wholesale (1)
  • WIHA TOOLS (1)
  • Wolf Peak (1)
  • Show More...

• Knockout Size

  

  • 1/2" (27)
  • Multiple Sizes (6)
  • Show More...

• Shank Type

  

  • 1/4" Hex (17)
  • 3/8" Hex (1)
  • 3-FLAT (2)
  • 7/16 IN Hex (10)
  • HEX (7)
  • Hex Arbor (1)
  • Hexagonal (4)
  • Hollow (1)
  • Round (40)
  • Round Rapi-Driv(R) (1)
  • Round Rapi-Driv® (2)
  • Square (4)
  • STRAIGHT (7)
  • Show More...

• Grade

  

  • Heavy Duty (12)
  • M (Medium) (1)
  • M2 (14)
  • ULF (1)
  • Show More...

• Material

  

  • 1095 Steel (1)
  • 1680 Ballistic material (1)
  • 1680D Ballistic Nylon (1)
  • 1680d Ballistic Weave (21)
  • 1680d Ballistic Weave Body (1)
  • 1680d Ballistic Weave Body; Hard Molded Polypropylene Bottom (1)
  • 1680d Ballistic Weave, Mesh Interior (1)
  • 1680d Polyester Body; Hard Molded Polypropylene Bottom (2)
  • 440A Stainless Steel (1)
  • 600d Nylon (1)
  • 91% Polyester, 5% Thermoplastic Polyurethane, 4% Spandex (1)
  • ABS (1)
  • ABS and Electrical Components (1)
  • ABS;Steel (1)
  • Adjustable web belt (1)
  • All-metal housing and steel gears (1)
  • ALLOY STEEL (4)
  • Alloy Steel (8640) (1)
  • Alloy Steel;Reinforced Nylon (1)
  • Alloy Steel;Steel (3)
  • Aluminum (14)
  • Aluminum Oxide, Silicon Carbide, and Zirconia Alumina (1)
  • Aluminum/Steel (2)
  • BALLISTIC NYLON (3)
  • Bi-Metal (12)
  • Bi-Metal (Teeth) (2)
  • Bi-Metal Steel (3)
  • Bi-Metal, High Speed Steel (3)
  • Bi-Metal, HSS Tip (1)
  • Bi-Metal;8% Cobalt (1)
  • Bi-Metal;8% Cobalt;Steel (Teeth) (15)
  • Canvas (1)
  • Carbide (6)
  • Carbide (Tip) (15)
  • Carbide (Tip);Steel (Shank) (1)
  • Carbide Cutter Shank (1)
  • CARBIDE TIP (4)
  • Carbide Tipped (1)
  • Carbide Tipped Sheet Metal (1)
  • Carbon Steel (8)
  • Cast Alloy (1)
  • Cast Aluminum (1)
  • Cast Zinc Alloy (1)
  • CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention (7)
  • Chico (3)
  • CHROME VANADIUM STEEL (6)
  • Cobalt (3)
  • COBALT STEEL (1)
  • Compound (3)
  • Copper (1)
  • Copper;Aluminum;Non-Ferrous Metals;PVC;Plastic;Wood;Metal;Bi-Metal (Teeth) (1)
  • Cordura® (1)
  • Cordura® Camouflage (1)
  • Cordura® Fabric (1)
  • Custom Alloy76™ Steel (1)
  • Denier Polyester (1)
  • Die-Cast Copper-Free Aluminum (Body);Natural Neoprene (Gasket);Stainless Steel (Screw) (1)
  • Die-Cast Frame (1)
  • Drop-Forged, High-Carbon Steel (3)
  • Drywall (1)
  • Ductile Iron (4)
  • Durable Plastic/Metal (1)
  • EMT/Tube;Duct/Sheet Metal (1)
  • Extruded Polymer (1)
  • FABRIC (1)
  • Fiber (1)
  • Fiber Polyline (3)
  • Fiberglass (22)
  • Fiberglass Handle (1)
  • Flexible Foam (1)
  • FOAM (1)
  • For use in mild steel, stainless steel, brass, copper, aluminum, fiberglass and plastics (1)
  • Forged Steel (2)
  • Glass Filled Polypropylene (2)
  • Hardened Alloy Steel (2)
  • Hardened Carbon Steel;Alloy Steel (1)
  • Hardened Steel (8)
  • HEAT TREATED STEEL (2)
  • Heat-Treated Alloy Steel (1)
  • Heat-Treated High-Carbon Steel (11)
  • Heavy duty canvas (1)
  • Heavy-Duty Leather (1)
  • High Carbon Tool Steel (1)
  • High Grade Steel (1)
  • High Speed Steel (51)
  • High Speed Steel;Cobalt (1)
  • High-Carbon (1)
  • High-Carbon Steel (3)
  • High-Density Polyethylene Structural Foam (1)
  • HOT ROLLED STEEL (1)
  • Impact Resistant Plastic (1)
  • IMPACT RESISTANT POLYMER (7)
  • Induction Hardened Steel (13)
  • IRON (1)
  • Iron carbide (1)
  • JERSEY (1)
  • LEATHER (7)
  • M2 High Speed Steel (8)
  • Magnesium Cast (1)
  • Mechanical Clutch; Metal Gear Box (1)
  • Metal (9)
  • Metal (Frame);Polycarbonate (Lens) (2)
  • Mild and Stainless Steel (1)
  • NA (1)
  • Neodymium Alloy (1)
  • No. 10 Canvas (3)
  • No. 10 Canvas with Brass Zipper (1)
  • No. 4 Canvas with Leather Back (1)
  • NO. 6 CANVAS (2)
  • No. 8 Canvas (2)
  • Nylon (22)
  • Nylon (Frame) (2)
  • Nylon Zipper (2)
  • Nylon, Fiberglass Reinforced (1)
  • Padded Synthetic (1)
  • PC & PC-ABS housing and electronic components (1)
  • PC/ABS (3)
  • PC/ABS Housing with Electronic Components (1)
  • Plastic (5)
  • Plastic (Cartridge) (4)
  • Plastic (Frame);Polycarbonate (Lens) (2)
  • Plastic and Electronic Assemblies (1)
  • Plastic Handle with Rubber Grips (1)
  • Plastic Housing, Electronic Compenents (1)
  • Plastic Housing, PCB with Electronic Components (2)
  • Plastic/Electronics (3)
  • Plastic/Metal/Rubber (1)
  • Polycarbonate (1)
  • Polycarbonate (Lens) (1)
  • Polyester (8)
  • Polyester Fiber (1)
  • Polypropylene (7)
  • Polypropylene Spun Bond (1)
  • Polyurethane (3)
  • Polyurethane Foam (1)
  • Porcelain Steel (1)
  • Powder Metal (1)
  • Premium Leather (1)
  • Proprietary Heat Treated Steel (1)
  • Proprietary Steel (18)
  • Punch up to 10 ga mild steel (2)
  • Punch up to 10 ga mild steel or 12 ga stainless steel (1)
  • PVC (2)
  • PVC Coated Polyester (1)
  • Reinforced Nylon (2)
  • Rigid Steel (1)
  • Rugged Fabric (1)
  • Rugged Steel (1)
  • See punch and knockout driver specifications. (1)
  • Silicon Carbide (1)
  • Silicone (1)
  • Stainless Steel (13)
  • Stainless Steel Probe (1)
  • Stainless steel/Nylon Resin (1)
  • Stainless Steel;Hard Plastic;Rubber (1)
  • Steel (187)
  • Steel Cable, Thermoplastic Body (1)
  • Steel, Plastic, Rubber (1)
  • Steel;Stainless Steel (Sleeve) (1)
  • Synthetic Leather (1)
  • Synthetic Suede (3)
  • Tempered Steel (1)
  • Thermoplastic; Electronics (1)
  • Thick Steel (2)
  • Tip:Tungsten Carbide (4)
  • Titanium (2)
  • Tough Steel (2)
  • Tungsten Carbide (3)
  • Water and Chico (2)
  • Wood;Bi-Metal (Teeth) (2)
  • Show More...

• Blade Material

  

  • — (1)
  • 1095 Steel (1)
  • 420HC Stainless Steel (1)
  • 440A Stainless Steel (8)
  • 50Bv30 Steel with orange P.P. sheathed (dual) (1)
  • AUS 8 Stainless Steel (5)
  • Bi-Metal (7)
  • Canvas (1)
  • CARBON STEEL (1)
  • Carbon Tool Steel (1)
  • Chrome Vanadium (1)
  • Chrome Vanadium Steel (10)
  • Chrome Vanadium Steel Shank (1)
  • D2 Steel (3)
  • Drop Forged Hardened Tempered Alloy Steel (1)
  • Forged Steel (3)
  • Hardened Carbon Steel (1)
  • Hardened Steel (2)
  • Heavy Duty (1)
  • Heavy Duty Chrome Vanadium Steel (1)
  • Heavy Duty Steel (1)
  • High Carbon Steel (1)
  • HSS (2)
  • Induction Hardened Steel (1)
  • Iron Carbide Edge (1)
  • Micro Carbide Deposited Metal (1)
  • Micro Carbide Metal (2)
  • n/a (6)
  • Stainless Steel (6)
  • Steel (52)
  • Strong;Tough Tempered Steel (1)
  • Show More...

• Package Type

  

  • Bag (6)
  • Can (1)
  • Carrying Case (1)
  • Carton (29)
  • Carton;Pack (1)
  • CASE (1)
  • Clamshell PT (1)
  • Connectors, relays, circuit breakers, transformers, switchgear, motors, generators, controls, instruments, communication assemblies, electronics, alarm systems, starters, tubing, castings, gears, weld rod, wire, fixtures, dies, jigs, shim stock, chucks. (2)
  • Heavy Duty Carrying Case (1)
  • Industructo Box (2)
  • Pack (1)
  • Pop (1)
  • Spool (5)
  • Vinyl Pouch (1)
  • Show More...

• Housing Material

  

  • Durable Metal Construction, Rubber Bumpers (1)
  • Glass Filled Nylon (10)
  • Glass-filled Nylon (7)
  • Metal (3)
  • Metal and plastic (1)
  • metal, plastic (1)
  • Nylon (2)
  • Nylon, Magnesium (1)
  • Plastic (9)
  • Plastic with Rubber Overmold (2)
  • plastic, metal (1)
  • Plastic/Rubber (9)
  • Polycarbonate (3)
  • Reinforced Nylon (1)
  • Show More...

• Color

  

  • Aluminum (1)
  • Amber (8)
  • Amber;Translucent (1)
  • Beige (2)
  • Black (38)
  • Black (Handle) (21)
  • Black and Orange (3)
  • Black and Red (Handle) (1)
  • Black Oxide (16)
  • Black with Gray and Orange Trim (1)
  • Black with Orange/Gray (2)
  • Black, Gray, Orange Trim (1)
  • Black, Reflective Gray, Green Accents (1)
  • BLACK, YELLOW (1)
  • Black/Orange (3)
  • Black/Orange Piping (1)
  • Black/Orange/Gray (4)
  • Black/Red (2)
  • Black/Silver (1)
  • BLACK/YELLOW (4)
  • Black;Gold (2)
  • Black;Red;Yellow;Green;Blue;Brown (handle) (2)
  • Black;Reflective Grey;Green Accents (1)
  • Black;Yellow (1)
  • Black;Yellow (Handle) (1)
  • Blake / Grey (3)
  • Blue (20)
  • Blue (Bumper) (1)
  • Blue (Handle) (1)
  • Blue (Lens) (1)
  • Blue (Mirror) (1)
  • Blue/Black (Handle) (1)
  • Blue/Gray (1)
  • Blue;Clear (Frame) (1)
  • Brown (4)
  • Brown liquid, tan foam (1)
  • Brushed Nickel (Frame) (2)
  • Camouflage (5)
  • Camouflage (Handle) (1)
  • Channellock Blue (Handle) (5)
  • Clear (28)
  • Clear (Temple) (2)
  • Clear Blue (3)
  • Clear Colorless (1)
  • Clear;Colorless (3)
  • Colorless (11)
  • Creme (1)
  • Dark Amber (2)
  • Dark Blue (Handle) (1)
  • Dark Blue/Black (Handle) (1)
  • Dark Brown (1)
  • Dark Gray (1)
  • Dark or Light Gray (1)
  • Fluorescent Green (1)
  • Fluorescent Orange (2)
  • Fluorescent Pink (1)
  • Fluorescent Red (1)
  • Fluorescent Red/Orange (1)
  • Fluorescent Red-Orange (1)
  • Glow (Handle) (1)
  • Glow in the Dark (1)
  • Glow in the Dark (Handle) (1)
  • Gray (28)
  • Gray with Orange (1)
  • Gray/Black (1)
  • Gray;Yellow (1)
  • Green (4)
  • Green and White (1)
  • Hi Viz Yellow (1)
  • High-Visibility Orange (1)
  • Hi-Visibility Yellow (1)
  • Light Amber (1)
  • Light Blue (Handle) (1)
  • Light Blue/Black (Handle) (4)
  • Light Brown (2)
  • Light Gray (3)
  • Light Red (Handle) (1)
  • Light Yellow (1)
  • Light Yellow;Translucent (1)
  • Machine Gray (1)
  • Maroon (2)
  • Meter Gray (1)
  • Natural (2)
  • Natural/Brown (2)
  • Off-White (1)
  • Olive;Orange;Royal Blue;Yellow (1)
  • Opaque (1)
  • Orange (9)
  • Orange and Black (Handle) (1)
  • orange Fluorescent (1)
  • Orange;Black (1)
  • Pale Yellow (2)
  • Pink (1)
  • Purple (4)
  • Red (32)
  • Red (Handle) (2)
  • red and black (1)
  • Red Bumper (2)
  • Red/Black (5)
  • Red/Clear (1)
  • Red/Orange (1)
  • Red;Black (1)
  • Red;Black (Handle) (3)
  • Red;Gray;Black;Brown (1)
  • Reddish (2)
  • Rope:Yellow (4)
  • Royal Blue (1)
  • Safety Blue (1)
  • Safety Red (2)
  • Safety Yellow (1)
  • Silver (5)
  • Silver (Handle) (3)
  • Silver Gray (1)
  • Tan (4)
  • Tan Creamy (1)
  • Titanium Coated (1)
  • Translucent (2)
  • Transparent Red (Handle) (2)
  • Water-White (1)
  • White (22)
  • White and Blue (2)
  • White and Red (1)
  • WHITE GLOSS (1)
  • Yellow (17)
  • Yellow (Handle) (11)
  • Yellow and Black (Handle) (2)
  • Yellow Rope With Blue Tracer (1)
  • Yellow/Black (2)
  • Yellow;Black (2)
  • Yellow;Black (Handle) (9)
  • Show More...

• Handle Material

  

  • 1680D ballistic material (1)
  • 1680D Ballistic Weave (4)
  • 600D Durable Polyester (1)
  • Aluminum (3)
  • Aluminum Die Cast (1)
  • Anodized Aluminum (6)
  • Canvas (2)
  • Contoured Plastic Over Hardened Steel (1)
  • Cordura(R) Camouflage (1)
  • Cushion Grip (2)
  • Cushion Grip Handle (2)
  • Cushion-Grip Handle (1)
  • Die-Cast (1)
  • Double Dipped (1)
  • Fiberglass (8)
  • Glass-filled Nylon (2)
  • Hardened Tool Steel (1)
  • Heavy Duty Nylon (1)
  • Heavy-Duty Rubber (2)
  • High-Dielectric Plastic (7)
  • Hourglass (1)
  • Journeyman (2)
  • Multi-Component Grip (1)
  • n/a (1)
  • No Handle (1)
  • Non-Slip Plastic Coated (3)
  • Nylon Resin (1)
  • Nylon/Rubber (1)
  • Plastic (20)
  • Plastic Coated (1)
  • Plastic Dipped Steel (7)
  • Plastic Grip (7)
  • Plastic-Dipped Steel (1)
  • Polyester (1)
  • Polypropylene;Thermoplastic Elastomer (1)
  • PVC (1)
  • Reinforced Metal (Frame) (1)
  • Rubber (42)
  • Rubber (Grip) (1)
  • Rubber, High-Dielectric Plastic (1)
  • SANTOPRENE (2)
  • Stainless Steel (2)
  • Steel (11)
  • Strong, Tough, Tempered Steel (1)
  • Tough Steel (1)
  • TPE/Steel (1)
  • Vinyl (1)
  • Show More...

• Configuration

  

  • 1 to 1/4-Inch Taper (1)
  • 1-1/8 to 1/4-Inch Taper (1)
  • Hard Hat (2)
  • Magnetic (4)
  • Mini (5)
  • Non-Magnetic (12)
  • Set with Case (1)
  • without Tether Hole (1)
  • Show More...

• Color Code

  

  • — (2)
  • BLACK (2)
  • BLUE (4)
  • BROWN (4)
  • GREEN (1)
  • ORANGE (3)
  • PINK (1)
  • PURPLE (1)
  • RED (11)
  • YELLOW (6)
  • Yes (1)
  • Show More...

• Construction

  

  • Aluminum (2)
  • Designed for new cabling penetrations where sleeves are required. Includes a preformed steel sleeve with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal SSP Firestop Putty (2)
  • Double Friction Rod (1)
  • Ductile Iron (8)
  • Durable (1)
  • Light Weight and Strong (2)
  • M2 High Speed Steel (2)
  • One-Piece Construction (1)
  • Patented reinforcing edge minimizes stress breakage (7)
  • Rugged Steel (2)
  • Strong Synthetic (6)
  • Show More...

• Handle Type

  

  • — (1)
  • Barrel Grip (1)
  • Black Plastic (1)
  • Black Powder Coat on Alloy (1)
  • CHANNELLOCK BLUE® grips for comfort (7)
  • Color-Coded Handles (3)
  • CUSHION GRIP (22)
  • Cushion Grip, Tapered (1)
  • Cushioned Rubber Grip (8)
  • Cushioned/Comfort-Grip (1)
  • Cushion-Grip (6)
  • D-Handle (1)
  • Dipped, Comfort-Grip, Vinyl Coated (2)
  • Double Dipped for Comfort Grips (2)
  • Double Dipped Grip (1)
  • Dual-Material Journeyman Grip (1)
  • Ergonomic (10)
  • Ergonomic Grip (1)
  • Folding Pocket Style (1)
  • Handle Grips for Comfort (1)
  • Molded Comfort Grip (1)
  • Multi-Position (9)
  • No Handle (7)
  • Palm Grip (6)
  • Plastic Contoured Grip (1)
  • Plastic Covered Cushioned Handles (1)
  • Plastic Dipped (1)
  • Plastic-Covered Cushioned Handles (1)
  • Plastic-Covered Handles (1)
  • Rotary (1)
  • Skeleton (2)
  • Slim (4)
  • Soft Touch Grip (1)
  • Solid, Comfort-Grip, Vinyl Coated, Dipped (1)
  • Standard (2)
  • Steel (1)
  • Straight (8)
  • Textured (1)
  • Textured Non-Slip Santoprene Grips Cushion (3)
  • Textured, Ergonomic, Slip Resistant Comfort-Grip (1)
  • Ultra-comfortable hand grip (1)
  • Vinyl-Coated, Comfort-Grip (1)
  • Vinyl-Coated, Comfort-Grip, Dipped (2)
  • Show More...

• Finish

  

  • Aluminum (1)
  • Black (2)
  • Black Atramentized (1)
  • Black Oxide (18)
  • Black Phosphate (1)
  • Black/Gold (16)
  • Blue (3)
  • BROWN (1)
  • Brushed Nickel (2)
  • Caution Yellow (1)
  • CHROME (1)
  • Chrome Plated (3)
  • Chrome Plated (Shaft) (1)
  • Chrome-Plated (1)
  • CLIRVU Coating (1)
  • Cobalt Coated (2)
  • Cobalt Titanium Coated (5)
  • Dry, Gray, Matte Finish (1)
  • Enamel (1)
  • Galvanized (1)
  • Gray (1)
  • Gray Atramentized (2)
  • Green (2)
  • Heavy-Duty, Oversized, Plastic-Dipped (Handle) (1)
  • Journeyman (1)
  • Journeyman (Handle) (13)
  • Light Blue (1)
  • Matte (1)
  • Nickel Plated (1)
  • Nickel-Chrome Plated (1)
  • Nitrile Foam Coated (8)
  • Plastic Dipped (Handle) (16)
  • Polished Black Oxide (1)
  • POLISHED CHROME (2)
  • Polished;Black Oxide;Plastic-Dipped (Handle) (1)
  • Red (4)
  • Sand Blast with Oil Rub (1)
  • SATIN (2)
  • Steel (1)
  • Vapor-Blasted (1)
  • YELLOW (2)
  • Zinc Chromate (1)
  • Zinc Plated (2)
  • Show More...

• Length

  

  • 0 (1)
  • 0.25 (1)
  • 0.55 (2)
  • 0.875 (1)
  • 1 (16)
  • 1.0 (1)
  • 1.37 (1)
  • 1.57 (1)
  • 1.6 (1)
  • 1.625 in;41.3 mm (1)
  • 1.75 (1)
  • 1.875 (4)
  • 1.88 (8)
  • 10 (8)
  • 10" (1)
  • 10.0 (1)
  • 10.125 (1)
  • 10.25 (1)
  • 10.25 Inch (1)
  • 10.4 (1)
  • 10.5 (1)
  • 10.875 (1)
  • 100 (2)
  • 11 (2)
  • 11.7 (2)
  • 12 (13)
  • 12 ft (1)
  • 12" (1)
  • 12.000 IN (1)
  • 12.6 (1)
  • 120 (1)
  • 128 mm;5 in (1)
  • 13 (2)
  • 13.0 (4)
  • 13.25 (1)
  • 13.3 (1)
  • 13.5 in;342.9 mm (1)
  • 13.63 (3)
  • 14 (3)
  • 15 (5)
  • 1500 ft (2)
  • 16 (2)
  • 16" (1)
  • 16.3 (1)
  • 18 (13)
  • 2 (16)
  • 2 in;5.08 cm (1)
  • 2,200 (1)
  • 2.0 (1)
  • 2.13 (5)
  • 2.2 (4)
  • 2.2 in;5.588 cm (1)
  • 2.5 (7)
  • 2.625 (1)
  • 2.63 (15)
  • 2.67 (1)
  • 2.75 (1)
  • 2.875 (1)
  • 2.95 (1)
  • 2.955 (1)
  • 200 (2)
  • 203 mm (2)
  • 21 (1)
  • 21.0 (5)
  • 22.05 (1)
  • 22.38 in;56.85 cm (1)
  • 2200 (1)
  • 2200 FT (1)
  • 23.0 (2)
  • 23.4 in (1)
  • 24 in;60.96 cm (1)
  • 24.0 (1)
  • 240 (1)
  • 249 mm (2)
  • 25 (3)
  • 25800 (1)
  • 259.3 mm (1)
  • 3 (9)
  • 3,000 (1)
  • 3.112 (1)
  • 3.283 (1)
  • 3.5 (7)
  • 3.584 (1)
  • 3.679 (1)
  • 3.747 (1)
  • 3.765 (1)
  • 3.91 (1)
  • 3000 (5)
  • 3000 ft (2)
  • 36 (1)
  • 38 mm (1)
  • 4 (5)
  • 4.0 (1)
  • 4.13 (1)
  • 4.2 (1)
  • 4.55 (1)
  • 4.6 (1)
  • 4.62 (1)
  • 4.65 (1)
  • 4.75 in (1)
  • 41 in;1041 mm (1)
  • 44-7/8 (1)
  • 48 in;1.22 m (1)
  • 5 (1)
  • 5.12 (1)
  • 5.62 (4)
  • 5.625 (1)
  • 5.7 (1)
  • 5.828 in;148 mm (1)
  • 5.92 in (1)
  • 50 (2)
  • 500 (4)
  • 500 ft (1)
  • 5-1/2 (1)
  • 6 (32)
  • 6 in (1)
  • 6,500 (1)
  • 6.0 (30)
  • 6.0625 (1)
  • 6.25 Inch (1)
  • 6.39 (1)
  • 6.5 (3)
  • 6.75 (1)
  • 6.8 (2)
  • 6.9 (2)
  • 6.94 (1)
  • 6-1/2" (1)
  • 6960 (1)
  • 7 (2)
  • 7 INCH (1)
  • 7.75 (1)
  • 7.8 (1)
  • 7.9 (1)
  • 7-1/2 (1)
  • 72 (1)
  • 7200 (3)
  • 8 (12)
  • 8.0 (5)
  • 8.19 (1)
  • 8.6 (1)
  • 8-1/2 (1)
  • 9 (10)
  • 9 INCH (3)
  • 9-1/2" (1)
  • 9-1/2" (241.3 mm) (1)
  • 9-3/32 in;231 mm (2)
  • 98 mm (1)
  • Connectors, relays, circuit breakers, transformers, switchgear, motors, generators, controls, instruments, communication assemblies, electronics, alarm systems, starters, tubing, castings, gears, weld rod, wire, fixtures, dies, jigs, shim stock, chucks. (9)
  • Poly tank sprayer designed for professional use. Holds one gallon. (2)
  • Show More...

• Blade Length

  

  • — (1)
  • 0 (7)
  • 0.625 in;15.9 mm (Knief Length) (1)
  • 0.75 in;19.05 mm (1)
  • 0.78 in (1)
  • 0.781 in (Knife);19.8 mm (Knife) (1)
  • 1.5" (3.8 cm) (1)
  • 1/2 in;12.7 mm (Knief Length) (2)
  • 12 (3)
  • 12 in (3)
  • 12 in;304.8 mm (1)
  • 12.0 (3)
  • 1-3/4 in;44.5 mm (1)
  • 2.0" (4.9 cm) (1)
  • 2.25" (5.7 cm) (2)
  • 2.375" (6 cm) (1)
  • 2.5 in;63.5 mm (2)
  • 2.625" (6.7 cm) (1)
  • 2.75 (1)
  • 2.8 in;71 mm (1)
  • 2-1/2 in;63.5 mm (3)
  • 230 mm (1)
  • 25/32 in;19.8 mm (Knief Length) (6)
  • 25/32 in;20 mm (Knief Length) (2)
  • 2-5/8 in;66.7 mm (1)
  • 27 (2)
  • 27.0 (1)
  • 2-7/16 in (61.9 mm) x 0.025 in (0.6 mm) (1)
  • 3 (3)
  • 3" (7.6 cm) (1)
  • 3.0 (1)
  • 3.375" (8.6 cm) (1)
  • 3.4" (8.6 cm) (1)
  • 3.5" (8.9 cm) (2)
  • 3.75" (9.5 cm) (1)
  • 3-1/2 in;89 mm (1)
  • 32.875 (1)
  • 35.36 (1)
  • 35.375 (3)
  • 35.375 in (4)
  • 4 in (1)
  • 4 to 8 in (1)
  • 4.0 (1)
  • 44.875 (10)
  • 5.2" (13.2 cm) (1)
  • 5.5" (14 cm) (1)
  • 5/8 in;15.9 mm (Knief Length) (4)
  • 6 (4)
  • 6 in (10)
  • 6 in;152 mm (1)
  • 6 in;152.4 mm (2)
  • 6" (15.2 cm) (2)
  • 6.0 (6)
  • 6.5 (1)
  • 6-1/4 in;160 mm (1)
  • 7 in (1)
  • 8 in;203 mm (2)
  • 8.0 (2)
  • 9 (2)
  • 9 in (6)
  • 9 in;228.6 mm (2)
  • 9 in;229 mm (1)
  • 9.0 (4)
  • Show More...

• Type

  

  • 0.80 oz (22.7 g) (1)
  • 760 Series With TRMS, Capacitance, Frequency (2)
  • ACCU-BEND™ Conduit and Pipe (2)
  • Adustable recessed hole saw cutter (1)
  • Aerosol Marking Paint (6)
  • All-Purpose (1)
  • Aluminum (2)
  • Anchor (3)
  • Anti-Oxidant Compound (4)
  • Apprentice Tool Set (2)
  • Assisted-Open (1)
  • Bi-Metal Hole Saw (3)
  • Box Accessories (2)
  • Box Joint (5)
  • Bubble with Adjustable Vial (1)
  • BX and Armored Cable Cutter (1)
  • Cable (4)
  • Cable Cutter (5)
  • Cable Cutters (1)
  • Carbide Hole Cutter (2)
  • carbide rotary (3)
  • Carbide Tipped Hole Cutter (3)
  • Carbide-Tipped Hole Cutter (3)
  • Caulking Gun (1)
  • Circuit Breaker Lockout (2)
  • Cleaning Tools (2)
  • Clear Coat Marking Paint (1)
  • Clear Silicone Sealant (2)
  • Cold Galvanized Spray Paint (5)
  • COMPACT (2)
  • Compact Combo Bit Kit (1)
  • Conduit adhesive (1)
  • Conduit Reamer Drill Head for 1/2, 3/4, 1 (1)
  • Conduit Reamer Replacement Blade Kit (1)
  • Connector Crimping (1)
  • Connector Tool (1)
  • CONSTANT PITCH (2)
  • Construction Marking Paint (8)
  • Contact Cleaner (2)
  • Cordless Reciprocating Saw Kit (1)
  • Crimper (2)
  • Cutting Oil (2)
  • Cutting, Plier, Tools (1)
  • Dark Cutting Oil (1)
  • Degreaser (3)
  • Demolition (5)
  • Diagonal Cutting Pliers (15)
  • DIE (5)
  • Dies (3)
  • Digital Thermometer (2)
  • Double Entry, Cross Step (4)
  • Drill Kit (2)
  • Drill/Tap Kit (1)
  • Driver Bit Set (1)
  • Duct Seal (4)
  • Ductile Iron (8)
  • Economy Wiping Rag (1)
  • ECX (1)
  • Electrical Coating (1)
  • Electrician's (2)
  • Electricians Tool Set (2)
  • Electrician's Torpedo (1)
  • ELECTRONIC (2)
  • Extra Capacity Adjustable Wrench (3)
  • Extra Slim Adjustable Wrench (3)
  • Fiber sealing compound (3)
  • Fire Barrier Moldable Putty Pads MPP (2)
  • Firestop Sleeve (2)
  • FLAT (2)
  • Flex A Bit (3)
  • Flex Bit, Wire Placement Tool, and Grip Kit (1)
  • Flexgrip High Dexterity Gloves (2)
  • Foam Carrier (16)
  • Foam conduit piston for IMC and Rigid (3)
  • Foam Duct Sealant (1)
  • Foam piston for all conduit types (5)
  • Folding Set (3)
  • Full Brim Hard Hats - Non-vented (1)
  • Garden Tool (2)
  • Gel (2)
  • General Duty Dolly (1)
  • General Purpose Hand Pad (1)
  • General Use (3)
  • GFCI and Standard Receptacle Tester (2)
  • Hack Saw (3)
  • Hacksaw (2)
  • HAND (16)
  • Hand Tote (1)
  • Handi-Foam Expanding Sealant (1)
  • Headlamp (1)
  • Heavy (2)
  • HEAVY DUTY (4)
  • Heavy Duty Nylon Line (1)
  • Heavy-Duty, Slotted, Keystone Tip (2)
  • HEX (9)
  • hex chuck (2)
  • Hex Driver (4)
  • Hi Speed Drill (5)
  • High Leverage Side Cutting/Connector Crimping Pliers (2)
  • High Speed Drill (14)
  • High Tension (1)
  • High-Leverage Diagonal-Cutting Pliers (2)
  • Hole Saw (3)
  • Hollow (4)
  • Hybrid Gloves (2)
  • Hydraulic Punch Kit (2)
  • Impact Rated (1)
  • INSECTICIDE (2)
  • Iron Bender Head (1)
  • Ironworker's Pliers (3)
  • Jobber Drill (3)
  • Knockout Punch with Wrench (1)
  • K-PVC Cutter (1)
  • Large Cable (2)
  • Light Weight (3)
  • Line Package (2)
  • Lockout (2)
  • Long Nose Pliers (2)
  • Long Nose Side Cutting Pliers (8)
  • Long Ship (3)
  • Long Ship Anger Bit (2)
  • Long Ship, Heavy-Duty (3)
  • Long-Nose Pliers With Cutter (2)
  • Lubricant (12)
  • MAGNETIC (3)
  • Magnetic Bit Holder (1)
  • Magnetic Hex Tool (6)
  • Magnetic Lighted Torpedo Billet (1)
  • Magnetic Wristband (1)
  • Manual Crimp Tool (4)
  • Manual Knockout Set (1)
  • Manual Tool (2)
  • Masonry Drill (7)
  • Mechanical Bender (1)
  • MEDIUM (7)
  • Mini Magnetic (1)
  • Multipurpose Lubricant (1)
  • Needle Nose Tip (1)
  • Non-chlorinated Degreaser (2)
  • Non-Contact (2)
  • Nylon Line (1)
  • Off-Line Contact Cleaner (1)
  • Other enclosure accessories (2)
  • Paste (4)
  • Penetrating Solvent (2)
  • Phillips, Phillips Head Screws (3)
  • Phone Holder with Belt Clip (6)
  • pilot drill (1)
  • Pilot drill bit (3)
  • Pliers (1)
  • Plug Ejection Spring (1)
  • POCKET (2)
  • Pocket Knife (4)
  • Post Hole Digger (1)
  • Powder (3)
  • Power Bit (2)
  • Precision Cleaner (4)
  • Protective Eyeware (2)
  • Pull Line Measuring Tape (6)
  • Pull Rope (2)
  • pull tape (4)
  • PVC All Weather Low VOC Cement (1)
  • PVC Low VOC Cement #99 (1)
  • QUICK CHANGE (1)
  • Quick Change Carbide Tipped Hole Cutter (1)
  • Ratcheting Screwdriver (1)
  • Recessed Light Hole Saws (2)
  • Reciproblade (1)
  • Replacement (4)
  • Replacement Blade (4)
  • Replacement Blades (1)
  • Replacement Die (1)
  • Replacement Die for SPEED PUNCH® Knockout Punches (3)
  • Replacement Die for standard round knockout punches (7)
  • Replacement Draw Stud (1)
  • Replacement Manual Draw Stud ball bearing (2)
  • Replacement Punch for SPEED PUNCH® Knockout Punches (2)
  • Replacement Punch for standard round knockout punches (1)
  • Replacement Standard Round Die (6)
  • Replacement Tap (2)
  • Replacement, Round (4)
  • Rod Coupling (1)
  • ROOF FLASHING (5)
  • Roof Mastic (3)
  • Rope (5)
  • Round Point Shovel (1)
  • RTV Silicon Sealant (4)
  • Rust Proof Paint (5)
  • SAFETY (3)
  • Safety Glasses (3)
  • SCREW (4)
  • Sealants & Lubricants (2)
  • Sealing Cement (2)
  • Sealing Compound (12)
  • Self Feeding (1)
  • Shelf Utility Cart (1)
  • SHIP (15)
  • Shoe Cover (1)
  • Shovel (4)
  • Side Cutting Pliers (9)
  • Silicone Grease (2)
  • Silicone Lubricant (2)
  • Single Use Wire (16)
  • Slim Electronics (2)
  • SLOTTED TIP (1)
  • Slug Splitter® SC Replacement Die 1/2" Conduit size (1)
  • Small arbor with split point pilot drill to prevent walking (1)
  • Soft Sided (3)
  • Solenoid (1)
  • SPEED PUNCH® replacement die (2)
  • SPEED PUNCH® replacement punch (3)
  • Spray Paint (12)
  • STANDARD (2)
  • Standard 7 piece ratcheting wrench set (1)
  • Standard IN (2)
  • Standard, Combination (1)
  • Steel (4)
  • Step Drill Bit (3)
  • Stripper/Cutter/Termination (1)
  • STUBBY (11)
  • T IA (3)
  • Tetrahydrofuran, Methyl Ethyl Ketone, Acetone, Cyclohexanone (2)
  • The Multi-Purpose Towel (1)
  • Thread Cutting Lubricant (2)
  • Thread Lubricant (3)
  • Three Piece Knockout Seal (2)
  • Tip Bit (5)
  • Tongue & Groove (1)
  • Tongue & Groove, Pump Plier, Water Plier, Tools (6)
  • Tool Backpack (2)
  • Tool Bag (1)
  • Torpedo (3)
  • Trenching Shovel (1)
  • Tubing Cutter (2)
  • Type 1 (3)
  • Type IA (2)
  • Type IA, Two Section (2)
  • Type IAA (5)
  • Ultra Cutter Hole Saw (5)
  • Ultra Cutter Hole Saw Kit (1)
  • Ultra Fine Hand Pad (1)
  • Urethane Coating (2)
  • Water Based (3)
  • Web Strap (11)
  • Wiping Rag (2)
  • WIRE SHOEHORN (1)
  • Wire Stripper (11)
  • Wood Frame Intumescent Firestop Sealant (1)
  • Work Glove (3)
  • Zinc Rich Cold Galvanize Coating (1)
  • Show More...

• Size

  

  • #1 (3)
  • #2 (4)
  • #2 PHILLIPS, 1/4 INCH SLOTTED (1)
  • #2 x 48 IN (1)
  • #8 (1)
  • .25 (1)
  • 0.5 OZ Tube (1)
  • 1 (14)
  • 1 in (3)
  • 1 Qt. PVC All Weather Low VOC Cement (1)
  • 1 Qt. PVC Low VOC Cement #99 (1)
  • 1" (1)
  • 1.0" (1)
  • 1.115 IN (1)
  • 1.362 IN (1)
  • 1.362 IN (34.600 MM) Actual Hole Size (1)
  • 1.951 IN (49.600 MM) Actual Hole Size (1)
  • 1/*2 (1)
  • 1/2 (2)
  • 1/2 in (4)
  • 1/2 in;3/4 in;1 in (1)
  • 1/2 INCH (2)
  • 1/2" (2)
  • 1/2" - 1-1/4" conduit size knockouts (hole size: 0.89" - 1.70" or 22.5 mm - 43.2 mm) (1)
  • 1/2", 3/4" (1)
  • 1/2", 3/8", 5/16", 1/4", 7/32", 3/16", 5/32", 9/64", 1/8", 7/64", 3/32" (1)
  • 1/2", 9/16" 5/8", 3/4" (1)
  • 1/4 (5)
  • 1/4 in (1)
  • 1/4 IN HEX SHANK X 1/2 IN (1)
  • 1/4 INCH (2)
  • 1/4 X 2-9/16 (1)
  • 1/8 (1)
  • 10 (5)
  • 10 - 18 AWG Solid (1)
  • 10 - 18 AWG Solid, 12 - 20 AWG Stranded (4)
  • 10 - 22 (1)
  • 10" Tongue & Groove (1)
  • 10.0 (1)
  • 10.1 Fluid Ounce (US);20 Fluid Ounce (US);28 Fluid Ounce (US);4.5 Gallon (US) (1)
  • 10.75 (1)
  • 10.9 oz (1)
  • 10-24, 12-24, And 1/4-20 (1)
  • 11.25 in x 7.50 in x 3.00 in (1)
  • 1-1/2 in (2)
  • 1-1/2 in;2-1/2 in;3 in (1)
  • 1-1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm) (1)
  • 1-1/4 in (3)
  • 1-1/4 to 2 in (1)
  • 1-1/8 (1)
  • 1-1/8 In (1)
  • 1100 (1)
  • 12 (5)
  • 12" Tongue & Groove (1)
  • 12.3 oz (1)
  • 12/2 And 14/2 Solid NM Cable (1)
  • 12/2 AWG Or 14/2 AWG NM Cable (1)
  • 13 Piece (1)
  • 13 x 29.5 (33 x 74.9 cm) (1)
  • 1-3/4 Oz (1)
  • 1-3/8 (1)
  • 1-3/8 In (1)
  • 14 - 24 AWG Solid, 16 - 26 AWG Stranded (1)
  • 14 Inch L (3)
  • 14 x 27 (1)
  • 14 x 48 (1)
  • 15 x 4.61 x 19.76 (1)
  • 15.24 x 4.61 x 9.72 (1)
  • 16 (37)
  • 16 Ounce (1)
  • 16 Piece (1)
  • 16.1 x 11.3 x 22.1 (1)
  • 16.38 x 2.52 x 19.76 (1)
  • 16.5" Tongue & Groove (1)
  • 17 (10)
  • 19 oz (0.6 L) (1)
  • 2 in (3)
  • 2" Conduit (2.42" or 61.5 mm) (1)
  • 20 (22)
  • 20.25" Tongue & Groove (1)
  • 21 Inch L (4)
  • 2-1/2 (1)
  • 25.6 x 18.9 x 22.1 (1)
  • 28 Inch L (4)
  • 28-1/4 Inch Length (1)
  • 3 (3)
  • 3.8 Inch Width x 1.8 Inch Depth x 7.6 Inch Height (1)
  • 3.94 Inch Length x 0.79 Inch Width x 1.14 Inch Height (1)
  • 3/16 (1)
  • 3/16 in (1)
  • 3/16", 7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 7/32", 1/8", 9/64", 5/32", 3/16", 1/4", 5/16", 3/8" (1)
  • 3/4 (2)
  • 3/4 in (3)
  • 3/4 x 2-1/8 In (1)
  • 3/4 x 2-5/16 In (1)
  • 3/4 x 4.77 In (1)
  • 3/4 x 8 (1)
  • 3/4" (3)
  • 3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1)
  • 3/8 (1)
  • 3/8 in (1)
  • 3/8 INCH (1)
  • 3/8 x 1-5/8 In Draw Stud for Manual Drivers (1)
  • 35 Inch L (5)
  • 4 (1)
  • 4 OZ Squeeze Bottle (1)
  • 4 x 48 (1)
  • 4.5" Tongue & Groove (1)
  • 5 (5)
  • 5/16 (1)
  • 5/16 x 2-9/16 (1)
  • 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1)
  • 5/8 (1)
  • 5/8, 1 (1)
  • 5-16 Inch (2)
  • 5-3/8 (1)
  • 550 (1)
  • 6 (2)
  • 6 - 14 AWG Solid, 8 - 16 AWG Stranded (2)
  • 6 piece, 6-32 to 1/4-20 (1)
  • 6.5" Tongue & Groove (1)
  • 7" Wire Stripper (1)
  • 7.25 x 7.25 x 3/16 (1)
  • 7.9 x 0.6 x 1.6 in;20.1 x 1.5 x 4.1 mm (1)
  • 7/16 IN Hex Shank (1)
  • 7/16 INCH (1)
  • 7/8 (1)
  • 7/8 IN (3)
  • 7/8" to 1-3/8" (22.2 to 34.9 mm) (1)
  • 7/8, 1-1/8 (1)
  • 72-Count Bucket (1)
  • 8 (7)
  • 8 - 14 AWG Solid, 8 - 16 AWG Stranded (1)
  • 8 - 16 AWG Solid, 10 - 18 AWG Stranded (1)
  • 8 inches L by 1.5 inches W by 1.12 inches D (1)
  • 8 LB (1)
  • 8 Ounce (3)
  • 8 OZ Bottle With Brush In Cap (1)
  • 8 OZ Squeeze Bottle (1)
  • 8 x 8 x 17 (1)
  • 8" HL Diag Cutting Plier (1)
  • 8.5 (1)
  • 80 (1)
  • 9.5" Tongue & Groove (1)
  • 9.76 x 2.52 x 16.38 (1)
  • 9/32 in (Shackle) (1)
  • Extra Large (5)
  • Extra-Large (1)
  • Fits 200ml Cartridge (1)
  • L(2.250) x W(5.500) x H(1.000) (1)
  • L=12 - Diameter=2.375 (1)
  • Large (10)
  • M/L (1)
  • Medium (5)
  • One Size (11)
  • One Size Fits Most (3)
  • Pack of 5 (1)
  • Random (3)
  • Ranging from 1/2" to 4" (1)
  • Regular (1)
  • Replacement Die for 1-11/16 In Standard Round Knockout (1)
  • Replacement Die for 1-3/8 In Standard Round Knockout (1)
  • Replacement Die for 2-1/4 In Standard Round Knockout (1)
  • Replacement Die for 2-3/8 In Standard Round Knockout (1)
  • Replacement Die for 2-7/8 In Standard Round Knockout (1)
  • Replacement Die for 3/4 In Standard Round Knockout (1)
  • Replacement Die for 3-1/2 In Standard Round Knockout (1)
  • Replacement Die for 5/8 In Standard Round Knockout (1)
  • Replacement Punch for 3-1/2 In Standard Round Knockout (1)
  • Sizes are specific to each product. (1)
  • Small (3)
  • Square: 3/4", 13/16", 1", 1-1/8"; Hex: 9/16", 3/4" (2)
  • Standard IN (1)
  • X-Large (2)
  • XX-Large (1)
  • Show More...

• Base Type

  

  • Acetone, Propane, Toluene (6)
  • Alkyd Resin (1)
  • Chlorinated (2)
  • Elastomer (1)
  • Elastomeric Latex (1)
  • Halogenated (1)
  • HFC (1)
  • HFC/Cozol(R) (1)
  • HFE (1)
  • Latex (1)
  • Lithium (2)
  • Lithium-12 (1)
  • Non-Drying Synthetic Polymers and Oils (1)
  • Non-Petroleum (1)
  • Non-Toxic/Asbestos Free (1)
  • Oxide (1)
  • Petroleum (6)
  • Petroleum Distillate (4)
  • Polyurethane (4)
  • PTFE (1)
  • Silicone (3)
  • Silicone Rubber (1)
  • Solvent (5)
  • Solvent;Water (1)
  • Tetrahydrofuran (1)
  • Vinyl (1)
  • Water (2)
  • Show More...

• Application

  

  • "Blending, Cleaning, Contour Finishing, Deburring, Finishing" (1)
  • "Contour Finishing, Fine Finishing, Finishing" (1)
  • #8 AWG Copper, Aluminum and Other Soft Metals and Crimps Non-insulated Connectors, Lugs, and Terminals (1)
  • 1 in EMT Conduit (1)
  • 10-in-1, 11-in-1 and 10-Fold™ Screwdriver/Nut Drivers (2)
  • 3/4 in EMT Conduit (1)
  • 5 Piece Quick Change Carbide Tipped Hole Cutter kit cuts stainless steel quickly and easily (1)
  • 5/8" (15.9 mm) Pole Line and Hardware Bolts, Threaded Rods (1)
  • 6 Piece Ultra Cutter kit for conduit sizes 1/2 - 2 In. (1)
  • 8-16 AWG Solid and 10-18 AWG Stranded Wire (2)
  • A wide variety of common penetrations in light commercial and grouped residential construction. Penetrant types include insulated and non-insulated metallic pipes and tubes, non-metallic pipes and tubes, and common electrical service and power distribution, telephone, data, and TV cabling. (1)
  • Abusive (3)
  • Accurate Targeting and Temperature Measurement (1)
  • ACSR, Screws, Nails, Most Hardened Wire (11)
  • ACSR, Screws, Nails, Most Hardened Wire; Crimps Noninsulated Connectors, Lugs and Terminals; Pulls Steel Fish Tape (1)
  • Aggressive Cleaning Applications (1)
  • Air tools, mechanical brakes, clutches, chains, wire ropes, motors, dies, molds, parts, bearings, generators & compressors. (3)
  • Alternative 45 Degree Mounting for Flush Cutting (1)
  • Assembly;Blasting;Cleaning;Demolition;Electrical;Facility Maintenance;Grinding;Machine Operations;Painting;Sanding;Welding (1)
  • Assembly;Cleaning;Demolition;Electrical;Facility Maintenance;Grinding;Machine Operations;Painting;Remediation;Sanding;Welding (4)
  • Bi-Metal Hole Saw with 1-5/8 In cutting depth allowing cutting on 2x4 studs. Extra-thick backplate minimuzes vibration for smoother, easier cutting. (3)
  • Blower;Vacuum System (6)
  • Blowing Directly into Conduit (3)
  • Bolt Applications (11)
  • Bores Clean Holes at any Angle in Wood, Plastic, Plywood and Formica (6)
  • Brick;Concrete;Tile;Slate;Cinder Block (1)
  • Bulbs and Sockets, Circuit Breakers, Cables, Elevators, Generators, Ignition Systems, Lift Trucks, Coils, Vending Machines, Lawn Mowers, Machinery, Spare Parts, Nuts And Bolts, Wheels, Bicycles, Transformers (1)
  • Burr-Free PVC Cutting (1)
  • Cable Installation (3)
  • Cable Pulling (3)
  • Cable Stripping (2)
  • Can be used with Greenlee battery-hydraulic knockout drivers, manual-hydraulic knockout drivers, or ratchet wrench. Use with Greenlee dies and draw studs. (1)
  • Caulks, Sealants, Adhesives (1)
  • Check for and find the true vertical and horizontal;Transfer angles between surfaces with adjustable vial (1)
  • Class E (2)
  • closed-cell duct sealant prviding superior pressure-blocking power (1)
  • Common constructions including concrete floors, concrete walls, concrete block walls, and gypsum board/stud wall assemblies up to 10" (250 mm) thick. (2)
  • Common Electrical Fastening (1)
  • Concrete;Ceramics;Fabric;Glass;Leather;Metal;Plastics;Rubber;Tile;Vinyl;Wood (2)
  • Conduit and Pipe (2)
  • Conduit Bending (2)
  • Connection Between Roof Line and Service Entrance Conduit/Ventilation Pipe (2)
  • Connectors, relays, circuit breakers, transformers, switchgear, motors, generators, controls, instruments, communication assemblies, electronics, alarm systems, starters, tubing, castings, gears, weld rod, wire, fixtures, dies, jigs, shim stock, chucks. (2)
  • Construction Marking (2)
  • Construction/Plumbing/Electrical (1)
  • Construction;Aervoe Survey Marking (4)
  • Construction;Food & Beverage;Pharmaceutical (2)
  • Contacts;Metal Switches;Motors;Relays;Generators;Edge Connectors;Busbars;Circuit Breakers;Scales & Sensors (2)
  • CRIMPING (11)
  • Crimping Lugs/Taps (4)
  • Crimping terminals/splices/disconnects (2)
  • Crimps UR/UY/UG Insulation Displacement Connectors (IDC)- Scotchlok Type Connectors, Cleanly Strips 23 AWG and 24 AWG Wires (1)
  • Cut Material Thickness 1/16 to 3/16 in for Ferrous Metal, 1/16 to 5/16 in for Non Ferrous Metal (1)
  • Cut Material Thickness 1/8 to 1/4 in for Ferrous Metal, 1/8 to 1/2 in for Non Ferrous Metal (1)
  • Cuts and Strips Wires (2)
  • Cuts Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16 in (5 mm) Thick (3)
  • Cutting Copper and Aluminum Cable (1)
  • Cutting Nail Embedded Wood;General Purpose Demolition Cutting;Metal Cutting (1)
  • Cutting Through Drywall, Plaster, Acoustical Tile, Wood and Stucco with Mesh (1)
  • Designed to withstand impact drills (10)
  • Designed to Work with Ties Rated at 120 to 250 lbs (1)
  • Determine Wiring Condition in Outlet (1)
  • Drill Through Metal, Wood and PVC (1)
  • Drill Through Wood, Metal and PVC (1)
  • Drilling (27)
  • Drilling Fast Hole in Clean Wood;For Feeding Wire or Bolt (5)
  • Drilling on Curved Surface (1)
  • Drilling Small and Large-Diameter Holes in Steel and Plastic (7)
  • Each Tap Size Rethreads to Next Larger Size If Threads Are Stripped. (2)
  • Electrical (17)
  • Electrical and Mechanical Connections (2)
  • Electrical Box, Faceplate, Wood/Steel Stud Wall (1)
  • Electrical Metallic Tubing (EMT) (4)
  • Electrical/Home Repair/Auto (1)
  • Electricians (4)
  • Electronics (2)
  • Energized Electrical Cleaner (1)
  • Extended Deep Hole Drilling (1)
  • Fast Cutting Through a Wide Range of Material such as Drywall, Wood and PVC (1)
  • Fast Drilling (1)
  • Fast Drilling and Debris Removal (1)
  • Fast Hole Drilling in Clean or Nail-Embedded Wood (7)
  • Fast Removal of the Concrete Dust From the Hole;Concrete Screw (1)
  • Fiber optics, plant machinery, computers, office equipment, electronics, video, audio, communication & photography equipment, lighting, workbenches, circuit boards, breaker panels, connectors, drafting tables & more. (1)
  • Fits All Hole Saws Up To 1-3/16 IN And Drill Chucks 1/2 IN And Larger (1)
  • Fits All Hole Saws Up To 1-3/16 IN And Drill Chucks 1/4 IN And Larger (1)
  • Fits All Hole Saws Up To 1-3/16 IN And Drill Chucks 3/8 IN And Larger (1)
  • For 1.000 Nail Eater Auger Bit IN (1)
  • For 1940 Flexible Metal Conduit Cutter (2)
  • For 3/4" - 2" conduit size Slug-Buster® and Standard Round knockouts. Use with Greenlee battery-hydraulic knockout drivers or 746A ram. (1)
  • for 3M™ O/B +, R/Y +, 3M™ Scotchlok™ Wire Connectors Y, R, G, and 3M 212, 312, and 512 (1)
  • For 77U-1 Slug-Buster SC® Knockout (1)
  • For 77U-3/4 Slug-Buster SC® Knockout (1)
  • For A Variety Of Industrial And Commercial Environments (2)
  • For All Shoes (1)
  • For Aluminum, Brass, Copper, Plastic and Up to 10 Gauge Metal (5)
  • For Arbor 49-57-0035 Which Can Be Used For Both Steel Plate And Sheet Metal Carbide Tipped Hole Saws (1)
  • For Bore Hardwood, Softwood, Plywood And Drywall (4)
  • For Bores Clean Holes At Any Angle In Wood, Plastic, Plywood And Formica (5)
  • For Boring Deeper Wood IN (1)
  • For Brick, Concrete, Tile, Slate And Cinder Block (7)
  • For Cable Cutting in Confined Spaces (1)
  • For Carbide Hole Cutter (1)
  • For Cordless Drills (1)
  • For Cutting Hardened Wire, Bolts And ACSR (2)
  • For Electricians, Plumbers, Utilities And Any Trade Requiring Fast Hole Drilling In Clean Or Nail-Embedded Wood (3)
  • For Equipment Touch-Up/OEM Production Applications (1)
  • For Excellent Fishing Performance (1)
  • For General Purpose (2)
  • For General Rough-in, Metal Cutting And Nail-Embedded Wood (1)
  • For General Use (2)
  • For Hickeys (2)
  • For Marking, Color Coding, Stenciling And Touch-Ups (5)
  • For mild steel, copper, brass and aluminum (1)
  • For Pipe And Conduit Work (1)
  • For Portable Drills (8)
  • For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. (12)
  • For punching holes in mild steel, aluminum, brass, copper, fiberglass and plastics (3)
  • For Reaching 1/2" (1.3 cm) and 3/4" (1.9 cm) Connectors in Deep or Tight Boxes (1)
  • For securing Contractor, DIY, Landscape Maintenance, recreational loads and more. (11)
  • For Sir Nickless Rotary Armored Cable Cutter (2)
  • For Skin and Hand Cleansing (1)
  • For Standard Round Knockout Punch Unit (1)
  • For Steel, Steel Forging, Cast Iron and Other Work Materials (14)
  • For Stripping Solid Or Stranded Wire (2)
  • For Threading Screws In Switches, Fixtures And Anchors (2)
  • For Use With Any Type Of Blower Or Vacuum System (10)
  • For Used To Seal Up Holes Punched In Panels Or Knockouts From Outlet Boxes (2)
  • For Versatility And Ease Of Use In Tight Spaces And Accurate Fastener Fit (1)
  • For Wire Pulling (2)
  • For Work Near Energized Sources (5)
  • Form New Threads, Re-form Burred Threads or Clean Out Plaster Obstructions (1)
  • General Industrial, Construction, MRO, Consumer Goods (3)
  • General Material Handling;Handling Small Part;Electrical Component Assembly;Carpentry;Plumbing;Roofing (3)
  • General Material Handling;Handling Small Part;Electrical Component Assembly;Carpentry;Plumbing;Roofing;Irrigation (2)
  • General Purpose (13)
  • General Purpose Cutting (1)
  • General Use (1)
  • Grounding and Bonding;For Welding Copper to Copper, Copper to Steel, Copper to Rail, Copper to Cast Iron and One for Welding Copper to Steel for Cathodic Protection (3)
  • Handling Abrasive/Sharp Material;Forming;Bending/Machining Sharp Part;Cable Pulling;Wire Handling;Cable Preparation (3)
  • Hard Metal;All Twist Drilling (3)
  • Hardware/Fastening (1)
  • Heat Retention (1)
  • Heavy Duty Impact (3)
  • Heavy Duty Impact;Drilling and Fastening (6)
  • Hole Drilling;Tapping;Deburring/Countersinking (2)
  • HVAC (4)
  • Impact Protection;Safety;UV Protection (3)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (8)
  • Indoor (3)
  • Industrial (33)
  • Industrial Cutting (1)
  • Installing Flooring and Trim;Laying Tile;Refinishing Floors;Refinishing Woodwork;Remodeling a Bathroom;Repairing a Deck;Yardwork (1)
  • Interior Applications as a General Purpose Fire Rated Sealant and Smoke Seal for Construction Joints on Both Vertical And Horizontal Surfaces (1)
  • Junction Box Flashing, Service Masts (1)
  • Large arbor with pilot drill for 1-3/8 - 2-1/2" cutters (1)
  • Large Cable Stripping (1)
  • Long Bolt and Stud Applications (1)
  • Lubricant (2)
  • Lunch, Food Cooler (2)
  • Masonry (2)
  • Measures AC Current (2)
  • Measures AC/DC Voltage (2)
  • Mechanical/Home Repair/Auto/Plumbing (4)
  • Mechanical/Home Repair/Plumbing/Auto (1)
  • Medium Metal;Thin Metal (1)
  • Metal (1)
  • Metal Cutting (15)
  • Metal Cutting Operation, Machining Operation (1)
  • Metal Stud Punch punch up through 20 gauge 1-5/8" steel studs. (1)
  • Metal;Concrete;Asphalt;Gravel;Soil;Tree;Turf Grass;Field;Landscaping Site;Golf Course;Nurseries;Surveying (2)
  • Motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies & molds. (1)
  • Multi-Purpose (3)
  • Multi-Purpose Cutting (1)
  • Non Ferrous Wire and Soft Metal Cutting (1)
  • Non-Galvanized Metal;Steel;Masonry;Wood;Machinery;Motors;Tools;Cabinets;Toolboxes;Steel Bars;Pipelines;Drums;Conduit;Ducts;Furniture and Ideal for Marking Hazard Area (1)
  • Nut Driving on Unlimited Bolt Lengths (2)
  • Nuts and bolts, pins, screws, bushings, clips, hinges, snaps, lugs, caps, locks, washers and sliding mechanisms. (2)
  • One Component Fire-Rated for Use in Electrical Boxes;It is Inserted on the Inside Back Wall of an Electrical Box Prior to Wiring;Replaces Putty Pads (1)
  • Overhead or One-Handed Cutting (1)
  • Phone Storage (6)
  • Pole Hardware Installation and Removal (5)
  • Polytuf Fabric (1)
  • Pressure-Type Wire Connectors Including Lugs;Taps;Service Entrances and Split Bolts (4)
  • Professional Electrician (2)
  • Punch mild steel, aluminum, fiberglass and plastic (1)
  • PVC Conduit (4)
  • PVC Pipe, Potable Water, Pressure Pipe, Gas, Conduit, Sewer, DWV System (4)
  • PVC and CPVC Pipe Applications such as Potable Water, Pressure Pipe, Gas, Conduit, Sewers and Drain, Waste and Vent (3)
  • PVC Pipe Applications Including Plumbing for Irrigation, Pools, Spas, Potable Water, Pressure Pipe, Gas, Conduit, Sewers and Drain, Waste and Vent (1)
  • PVC, CPVC and ABS Pipe, Tubing, and Socket -Type Fittings (2)
  • PVC, CPVC Pipe, Portable Water, Pressure Pipe, Gas, Conduit, Sewer, DWV System (1)
  • Quick Cutter recessed hole saw. Adjustable in 1/2 In increments for cuts of 2-1/2-7 In (1)
  • Relays, Switches, Contacts, Circuit Breakers, Plugs, Jacks, Terminals, Circuit Boards, Generators, Electromechanical Assemblies, Fusible Disconnects, Some Plastic Conveying Equipment (1)
  • Replacement Bit (1)
  • Replacement blade for Greenlee 35713 (1)
  • Replacement draw stud for use with manual drivers and standard round knockouts. (1)
  • Residential (1)
  • Residential;Commercial;Industrial (1)
  • Roof Flashing (2)
  • Scotchlok UG, UR and UY connectors (1)
  • Screw Thread (2)
  • Sealing Fittings and Hubs (5)
  • Seals electrical connections from oxygen and moisture (1)
  • Sewer (1)
  • Sharpen Knife and Scissors (1)
  • Sheet Metal (1)
  • Sheet Metal Cutting and Stainless Steel (1)
  • Side Cutting (1)
  • Side Cutting; Stripping; Crimping (1)
  • Slug Splitter® SC Knockouts for battery-powered, hydraulic and ram drivers. Capacity up through 10 gauge stainless steel. (1)
  • Slug-Buster® round replacement punch for battery-powered, hydraulic and ratchet drivers. (3)
  • Small arbor with pilot drill for 7/8 - 1-7/32" cutters (1)
  • Small Part Accessibility and Storage (1)
  • Specialty Lubrican for removing cables from ducts, softens binding agents minimizing the force required t pull cable out (1)
  • Specifically Designed for Locking Out Power Sources such as Disconnects, Switches, and Panel Boxes (1)
  • Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics (3)
  • Standard replacement draw stud for use with standard knockout punches. Use with batter-powered, hydraulic, ratchet or manual drivers. (2)
  • Standard round replacement die for use with standard knockout punches. Use with batter-powered, hydraulic, ratchet or manual drivers. (6)
  • Stripping Six Standard Wire Size without Nicking Wires (1)
  • Strips 12 AWG Wires (2)
  • Strong, Watertight, Airtight adhesive bond for conduits. (1)
  • Structural Steel, Fencing, Automobiles, Guard Rails, Bridges (1)
  • Strut;Conduit;Angle Iron;Copper Tube;Threaded Rod;Pipe;Cutting Common Materials 5/32 in - 3/16 in Thick and Very Hard Materials 3/16 in - 5/16 in Thick (1)
  • Telecom;Datacom;Security;Electrical (1)
  • Temporary Survey Marking (1)
  • Tight Wrench-Over-Wrench Applications (3)
  • Tightening (2)
  • To identify and code surfaces such as metal, concrete, asphalt, gravel, soil, trees and grass for construction, utility, recreational, municipal and landscaping sites, golf courses, nurseries and surveying. (2)
  • Tool Carrying (2)
  • Tool Storage (2)
  • Transformers;HVAC Equipment;Control Panels;Lighting (1)
  • Turning Fasteners (2)
  • Use In Brick, Concrete, Tile, Slate, & Cinder Block (3)
  • Use with battery-powered, hydraulic, ratchet or manual drivers. Capacity up to 10 gauge mild steel. Use on mild steel, aluminum, fiberglass and plastic. (8)
  • Use with blower or vacuum power fishing system to start conduit run. (8)
  • Use with Greenlee arbors 5/8 - 2-1/4". Split-point tip design eliminates need for center punch and resists walking. (1)
  • Use with Greenlee large arbor 925-022 (1)
  • Use with Greenlee small arbor 925-011 (1)
  • Used to seal around boxes, flashings and service entries. Compound is pliable, non-corrosive to metals and can be painted. For both indoor and outdoor use. #1003 asbestos-free duct sealing compound. (2)
  • Used to seal through penetrations and gaps in fire resistance rated wood frame construction such as floor/ceilings and walls or partitions. (1)
  • UV Protection (3)
  • Water (1)
  • Water Pump (4)
  • Water Pump, Gripping (1)
  • Wire Pulling (7)
  • Wire Stripping and Cutting (6)
  • Wood Cutting (3)
  • Wood Drilling (2)
  • Work on Up To 9/16" (1.4 cm) O.D. Wire (1)
  • Show More...

• Overall Length

  

  • 0.9" (2.3 cm) (1)
  • 1 (1)
  • 1 in (7)
  • 1 in;2 in;3.5 in (1)
  • 1" (2.5 cm) (5)
  • 1.265 in (2)
  • 1.29" (3.3 cm) (1)
  • 1.5 in (1)
  • 1.5 in;38.1 mm (3)
  • 1.62" (4.1 cm) (2)
  • 1.8" (4.6 cm) (2)
  • 1.8" (4.6 cm) (1)
  • 10 in (4)
  • 10 in;254.0 mm (2)
  • 10 INCH (3)
  • 10" (25.4 cm) (4)
  • 10.25" (26 cm) (4)
  • 10.313 (2)
  • 10.46 (1)
  • 10.63 in (1)
  • 10.75" (27.3 cm) (2)
  • 100 ft (1)
  • 10-1/4 in;260.4 mm (2)
  • 10-1/8 in;257 mm (1)
  • 10-11/32 in;262.7 mm (1)
  • 10-15/16 in;277.8 mm (2)
  • 11 (2)
  • 11 in (2)
  • 11" (27.9 cm) (2)
  • 11.25" (28.6 cm) (2)
  • 11.375 (1)
  • 11.5" (29.2 cm) (2)
  • 1-1/2 in (1)
  • 11-5/16 in;287.3 mm (1)
  • 12 (1)
  • 12 in (13)
  • 12 in;304.8 mm (2)
  • 12" (30.5 cm) (3)
  • 12" (30.5 cm) (1)
  • 12.25" (31.1 cm) (1)
  • 12.344" (31.4 cm) (1)
  • 12.5 in (1)
  • 12.5" (31.8 cm) (2)
  • 12.875" (32.7 cm) (1)
  • 12-1/2 in;317.5 mm (2)
  • 12-1/2 in;318 mm (2)
  • 12-1/4 in;311.2 mm (1)
  • 12-3/8 in;314.3 mm (1)
  • 13.25" (33.7 cm) (1)
  • 13.375 in;339.7 mm (1)
  • 13.438" (34.1 cm) (1)
  • 13.5" (34.3 cm) (4)
  • 1-3/8 in (1)
  • 130 mm (1)
  • 14 in;356 mm (1)
  • 14" (35.6 cm) (2)
  • 14.313 in;363.6 mm (1)
  • 14.5 in;368.3 mm (1)
  • 14-1/2 in;368.3 mm (1)
  • 15.5" (39.4 cm) (1)
  • 16 (1)
  • 16 in (1)
  • 16.000 IN (406.400 MM) (1)
  • 16-1/4 in;412.8 mm (2)
  • 17 in (2)
  • 17.5" (44.5 cm) (2)
  • 1-7/8 (1)
  • 1-7/8 in (7)
  • 1-7/8 to 3 in;47.6 to 76.2 mm (2)
  • 17-7/16 in;443.0 mm (1)
  • 18 (12)
  • 18 in (5)
  • 18 in;457 mm (1)
  • 18 INCH (5)
  • 18.5 in (1)
  • 19.76 in (1)
  • 19-1/2 in;495.3 mm (1)
  • 2 (1)
  • 2 ft (1)
  • 2 in (2)
  • 2.25" (5.7 cm) (1)
  • 2.438" (6.2 cm) (1)
  • 2.5 in (7)
  • 2.57" (6.5 cm) (1)
  • 2.73 (1)
  • 2.95 in (3)
  • 200 ft;60 m (1)
  • 21 in (1)
  • 2-1/2 INCH (3)
  • 2-1/8 in;54 mm (1)
  • 2-11/16 to 3-13/16 in;68.3 to 96.8 mm (1)
  • 22.25 in (1)
  • 23.75 (1)
  • 2-3/4 (1)
  • 24 in (5)
  • 24" (61 cm) (1)
  • 24" (61 cm) (1)
  • 240 mm (1)
  • 246 mm (1)
  • 250 ft (3)
  • 25-1/2 in;647.7 mm (1)
  • 27 in (1)
  • 2-9/16 (2)
  • 2-9/16 in (5)
  • 3 (2)
  • 3 in (2)
  • 3.438" (8.7 cm) (2)
  • 3.5" (8.9 cm) (6)
  • 3.54 in (1)
  • 3.625" (9.2 cm) (1)
  • 3.75" (9.5 cm) (2)
  • 30 in (2)
  • 3000 ft (2)
  • 3-1/2 (1)
  • 3-1/2 in (4)
  • 3-1/4 in (1)
  • 3-13/32 in;86.5 mm (1)
  • 3-3/4 (1)
  • 35.375 in (4)
  • 39 (2)
  • 39.0 (2)
  • 4 (5)
  • 4 ft (1)
  • 4 in (6)
  • 4 INCH (5)
  • 4" (10.2 cm) (4)
  • 4" to 8" (101.6 to 203.2 mm) (1)
  • 4.5 in;114.3 mm (1)
  • 4.563 (1)
  • 4.656 (2)
  • 4-1/2 (2)
  • 43"(109.2 cm) (1)
  • 47" (119.4 cm) (1)
  • 5 (2)
  • 5 in (3)
  • 5.25" (13.3 cm) (1)
  • 5.5" (14 cm) (2)
  • 5.75" (14.6 cm) (2)
  • 5.86" (14.9 cm) (1)
  • 500 ft (1)
  • 51"(129.5 cm) (1)
  • 5-1/2 (1)
  • 5-1/4 in;133.4 mm (1)
  • 5-3/4 (1)
  • 5-3/4 in;146.1 mm (2)
  • 54 (4)
  • 54 in (1)
  • 6 (11)
  • 6 in (36)
  • 6 in;152 mm (1)
  • 6" (15.2 cm) (2)
  • 6.125" (15.6 cm) (1)
  • 6.25" (15.9 cm) (1)
  • 6.313 (2)
  • 6.406 (1)
  • 6.5 in;165 mm (1)
  • 6.5 in;165.1 mm (1)
  • 6.5" (16.5 cm) (2)
  • 6.625" (16.8 cm) (1)
  • 6.68" (17 cm) (2)
  • 6.75 (5)
  • 6.75 in;171.5 mm (2)
  • 6.75 to 7.3125 (2)
  • 6.75" (17.2 cm) (3)
  • 6.9 (2)
  • 600 ft (2)
  • 6-1/2 in (5)
  • 6-1/2 in;165.1 mm (1)
  • 6-1/4 IN (158.800 MM) (3)
  • 6-1/4 in;158.8 mm (3)
  • 6-1/8 (2)
  • 6-1/8 in;155.6 mm (4)
  • 6-19/32 in;167.5 mm (1)
  • 6-3/4 in;171.5 mm (4)
  • 6-3/8 (2)
  • 6-5/16 in;160.3 mm (1)
  • 7 in (3)
  • 7" (17.8 cm) (2)
  • 7" (17.8 cm) (3)
  • 7.125" (18.1 cm) (2)
  • 7.25 in;184.2 mm (1)
  • 7.25" (18.4 cm) (1)
  • 7.313 (2)
  • 7.5" (19.1 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7.625 in (1)
  • 7.75 (2)
  • 7.75 in;196.9 mm (1)
  • 7.75" (19.7 cm) (4)
  • 7.797 in;198 mm (1)
  • 7.9 in;201 mm (1)
  • 7-1/2 INCH (2)
  • 7-1/4 in;184 mm (1)
  • 7-1/8 in;181.0 mm (1)
  • 72 (1)
  • 7-3/4 in;196.9 mm (4)
  • 8 (3)
  • 8 in (2)
  • 8 in;203 mm (3)
  • 8 in;203.2 mm (3)
  • 8" (20.3 cm) (4)
  • 8.25 (1)
  • 8.313" (21.1 cm) (3)
  • 8.344" (21.2 cm) (2)
  • 8.375 (1)
  • 8.41" (21.4 cm) (1)
  • 8.438 in;214.3 mm (1)
  • 8.5" (21.6 cm) (2)
  • 8.75" (22.2 cm) (2)
  • 8-1/16 in;204.8 mm (3)
  • 8-1/2 (1)
  • 8-1/4 in;209.6 mm (2)
  • 8-1/8 in;206.4 mm (3)
  • 8-11/32 in;211.9 mm (3)
  • 8-3/4 in;222.3 mm (1)
  • 8-3/8 (2)
  • 8-5/16 in;211.1 mm (1)
  • 8-5/8 in;219.1 mm (2)
  • 8-7/16 in;214.3 mm (2)
  • 8-9/16 in;217.5 mm (2)
  • 9 (2)
  • 9 in (9)
  • 9 in;228.6 mm (1)
  • 9 in;229 mm (4)
  • 9" (22.9 cm) (1)
  • 9" (22.9 cm) (3)
  • 9.01 in (1)
  • 9.09" (23.1 cm) (3)
  • 9.125 (1)
  • 9.3/8 in;238.1 mm (1)
  • 9.35" (23.7 cm) (5)
  • 9.375 (1)
  • 9.375" (23.8 cm) (1)
  • 9.5 in;241.3 mm (1)
  • 9.5" (24.1 cm) (2)
  • 9.594 in;243.7 mm (1)
  • 9.6 (2)
  • 9.75 (6)
  • 9.75 to 10.3125 (1)
  • 9.75" (24.8 cm) (3)
  • 9-1/2 in;241 mm (2)
  • 9-1/2 in;241.3 mm (5)
  • 9-1/4 (1)
  • 9-3/4 (3)
  • 9-3/4 IN (24.800 CM) (1)
  • 9-3/4 in;247.7 mm (4)
  • 9-3/8 in;238.1 mm (2)
  • 9-7/64 in;231.4 mm (2)
  • 9-7/8 in;250 mm (1)
  • 9-9/16 in;242.9 mm (1)
  • Show More...

• Weight

  

  • 0.01 lb (3)
  • 0.015 (2)
  • 0.02 lb (3)
  • 0.02 oz (0.45 g) (1)
  • 0.025 (2)
  • 0.026 lb (2)
  • 0.03 lb (6)
  • 0.030000 (2)
  • 0.04 (1)
  • 0.04 lb (3)
  • 0.044 lb (2)
  • 0.05 lb (7)
  • 0.06 lb (7)
  • 0.07 lb (6)
  • 0.08 lb (10)
  • 0.09 lb (5)
  • 0.090 LB (40.800 GM) (2)
  • 0.1 lb (9)
  • 0.10 lb (0.05 kg) (3)
  • 0.10 oz (2.8 g) (5)
  • 0.100 LB (45.300 GM) (1)
  • 0.11 (1)
  • 0.11 lb (5)
  • 0.12 lb (2)
  • 0.13 lb (6)
  • 0.14 lb (5)
  • 0.15 (1)
  • 0.15 lb (6)
  • 0.15 lb;0.07 kg (3)
  • 0.16 oz (4.5 g) (4)
  • 0.17 lb (5)
  • 0.18 lb (4)
  • 0.19 lb (8)
  • 0.19 lb;0.09 kg (1)
  • 0.2 lb (4)
  • 0.20 lb;0.09 kg (4)
  • 0.21 lb (5)
  • 0.22 lb (4)
  • 0.23 lb (5)
  • 0.25 lb (6)
  • 0.25 lb;0.11 kg (6)
  • 0.26 lb (4)
  • 0.26 lb;0.12 kg (2)
  • 0.27 lb (2)
  • 0.27 lb;0.12 kg (3)
  • 0.28 lb (4)
  • 0.29 lb (3)
  • 0.3 lb (6)
  • 0.3 oz (8 g) (2)
  • 0.30 lb (1)
  • 0.30 lb;0.14 kg (3)
  • 0.31 lb (4)
  • 0.32 lb (4)
  • 0.32 oz (9.1 g) (1)
  • 0.33 lb (2)
  • 0.34 lb (1)
  • 0.35 lb (3)
  • 0.35 lb;0.16 kg (2)
  • 0.36 lb (1)
  • 0.37 lb (3)
  • 0.38 lb (2)
  • 0.39 lb (1)
  • 0.4 lb (4)
  • 0.40 lb;0.18 kg (1)
  • 0.41 lb (1)
  • 0.41lb;0.19 kg (2)
  • 0.42 lb (1)
  • 0.44 lb (3)
  • 0.45 lb (3)
  • 0.4500 lb (1)
  • 0.46 lb (1)
  • 0.5 (1)
  • 0.5 lb (5)
  • 0.50 lb;0.23 kg (3)
  • 0.50 oz (14.2 g) (5)
  • 0.52 lb (1)
  • 0.53 lb (2)
  • 0.54 lb (2)
  • 0.55 lb (3)
  • 0.56 lb (2)
  • 0.59 oz (16.7 g) (1)
  • 0.6 lb (2)
  • 0.60 lb;0.27 kg (2)
  • 0.61 (1)
  • 0.61 lb (2)
  • 0.64 lb (3)
  • 0.64 lb;0.29 kg (2)
  • 0.67 lb (3)
  • 0.69 lb (1)
  • 0.7 lb (2)
  • 0.700 LB (318.000 GM) (1)
  • 0.71 lb (1)
  • 0.72 lb (1)
  • 0.75 lb (4)
  • 0.79 lb (2)
  • 0.8 lb (1)
  • 0.8 oz (23 g) (2)
  • 0.80 lb (2)
  • 0.80 lb;0.36 kg (2)
  • 0.80 oz (22.7 g) (3)
  • 0.83 lb (2)
  • 0.84 lb (1)
  • 0.85 lb (1)
  • 0.87 lb (1)
  • 0.9 lb (1)
  • 0.9 oz (26 g) (2)
  • 0.92 lb (1)
  • 0.94 lb (1)
  • 0.98 lb (1)
  • 1 (1)
  • 1 lb (8)
  • 1.0 lb (2)
  • 1.0 lb (0.5 kg) (9)
  • 1.05 lb (1)
  • 1.1 lb (1)
  • 1.1 lb (0.5 kg) (5)
  • 1.1 lb;0.5 kg (6)
  • 1.1 oz (31 g) (2)
  • 1.1 oz;31 g (2)
  • 1.13 lb (2)
  • 1.2 lb (2)
  • 1.2 lb (0.5 kg) (5)
  • 1.2 lb;0.5 kg (1)
  • 1.25 lb (2)
  • 1.27 lb (3)
  • 1.28 lb (1)
  • 1.3 lb (0.6 kg) (3)
  • 1.32 lb (2)
  • 1.33 lb (4)
  • 1.35 lb (1)
  • 1.4 lb (0.6 kg) (1)
  • 1.45 lb (2)
  • 1.5 lb (3)
  • 1.5 lb;0.68 kg (2)
  • 1.5 lb;0.7 kg (5)
  • 1.5 oz (43 g) (1)
  • 1.5 oz;43 g (2)
  • 1.50 kg (1)
  • 1.57 lb (1)
  • 1.6 lb (1)
  • 1.6 oz (45 g) (11)
  • 1.6 oz;45 g (2)
  • 1.64 lb (1)
  • 1.65 lb (1)
  • 1.7 lb (2)
  • 1.75 lb (1)
  • 1.9125 lb (0.87kg) (1)
  • 10 lb (2)
  • 10 lb;4.54 kg (1)
  • 10.1 oz (286 g) (3)
  • 10.2 oz (290 g) (2)
  • 10.25 lb (1)
  • 10.4 lb (2)
  • 10.5 lb (1)
  • 11.6 lb (1)
  • 12 lb (2)
  • 12 lb;5.4 kg (1)
  • 12.4 lb (1)
  • 12.5 lb (2)
  • 12.9 LB (Each) (1)
  • 13.6 oz;386 g (2)
  • 13.9 oz (395 g) (1)
  • 14 lb (4)
  • 14.4 oz (408 g) (2)
  • 14.7 oz (417 g) (2)
  • 15 lb (5)
  • 15 oz (425 g) (1)
  • 170 g (1)
  • 18 lb (2)
  • 2 lb (3)
  • 2.0 lb (0.9 kg) (1)
  • 2.0 lb (0.91 kg) (1)
  • 2.1 lb (0.9 kg) (1)
  • 2.11 lb (1)
  • 2.2999 lb (1)
  • 2.31 lb (2)
  • 2.32 lb (1)
  • 2.4 oz (68 g) (2)
  • 2.4 oz;68 g (2)
  • 2.5 lb (1.1 kg) (1)
  • 2.5 oz;71 g (2)
  • 2.6 lb (2)
  • 21 lb (1)
  • 27 lb (1)
  • 28.25 lb (2)
  • 3 oz (86 g) (2)
  • 3.2 oz (91 g) (16)
  • 3.2 oz;91 g (2)
  • 3.4 lb (1.5 kg) (1)
  • 3.5 lb (1.6 kg) (1)
  • 3.5 oz (99 g) (1)
  • 3.7 oz;104 g (2)
  • 3.77 lb (1)
  • 3.8 oz (109 g) (1)
  • 300 g (2)
  • 32.04 lb (1)
  • 36.5 lb (1)
  • 38 lb (1)
  • 39 Pound (1)
  • 395 g (2)
  • 4 oz (113 g) (13)
  • 4 oz (113.4 g) (1)
  • 4.0 lb (1.8 kg) (1)
  • 4.0 oz (113 g) (4)
  • 4.05 lb (1)
  • 4.22 (1)
  • 4.3 lb (2.0 kg) (2)
  • 4.4 lb (2)
  • 4.5 (1)
  • 4.5 lb (2.0 kg) (2)
  • 4.6 lb (2.1 kg) (1)
  • 4.6 oz (132 g) (2)
  • 4.65 lb (1)
  • 4.8 oz (136 g) (9)
  • 43 lb (1)
  • 48 lb (1)
  • 48 Pound (1)
  • 5 lb (2)
  • 5.1 oz (145 g) (2)
  • 5.3 oz (150 g) (2)
  • 5.4 oz (154 g) (2)
  • 5.5 lb (1)
  • 5.500 OZ (1)
  • 5.6 oz (159 g) (6)
  • 50 lb (2)
  • 6.1 oz (1)
  • 6.1 oz (172 g) (1)
  • 6.2 lb (1)
  • 6.2 oz (177 g) (3)
  • 6.4 oz (181 g) (2)
  • 6.6 oz;187 g (1)
  • 7 lb (1)
  • 7.0 lb (3.2 kg) (1)
  • 7.0 oz (187 g) (2)
  • 7.7 lb (1)
  • 7.8 lb (1)
  • 8 oz (227 g) (3)
  • 8.0 lb (3.6 kg) (2)
  • 8.02 lb/EA (1)
  • 8.5 lb (3)
  • 8.5 oz (241 g) (2)
  • 8.58 lb (2)
  • 8.6 oz (245 g) (2)
  • 8.95 lb (2)
  • 9 lb (2)
  • 9 oz (254 g) (1)
  • 9.6 oz (272 g) (3)
  • 9.6 oz;272 g (7)
  • 9.8 oz (277 g) (1)
  • 9.8 oz;278 g (2)
  • Show More...

• Tensile Strength

  

  • 1125 (2)
  • 1130 lb (1)
  • 1250 (2)
  • 1250 lb (2)
  • 17 (2)
  • 210 (2)
  • 2430 (3)
  • 2500 lb (3)
  • 310 (1)
  • 3600 lb (1632 kg) (1)
  • 3780 lb (1)
  • 400.000 LB (1.700 KN) Maximum Design Strength (1)
  • 500 (2)
  • 85 (1)
  • 85 LB (1)
  • NA (1)
  • Show More...

• Voltage

  

  • 1000V AC/DC (1)
  • 1000V AC; 1000V DC (3)
  • 110/125V AC at 50/60Hz in 3-Wire Outlet (2)
  • 12 - 1000V AC (2)
  • 12 to 600 V AC/DC (2)
  • 120 (4)
  • 120.0 (1)
  • 120V AC in 3-Wire Grounded Electrical Outlet (1)
  • 12-1000V AC (1)
  • 18 (2)
  • 18.0 (1)
  • 18.000000 (1)
  • 2 to 600V AC/DC (2)
  • 600V AC, 1000V DC (1)
  • 600V AC; 600 V DC (1)
  • AC Level Indicators: 12V, 24V, 120V, 240V and DC Indicators:1.5V, 9V, 12V, >17-24V (1)
  • AC Level Indicators: 24V, 48V, 120V, 240V; DC Level Indicators: 32V, 64V, 160V, 330V (1)
  • Low: 50V AC - 1.5kV AC High: 1.5kV AC - 132kV AC (1)
  • Show More...

• Temperature Rating

  

  • +200 (1)
  • -10 - 120 (3)
  • 120 (1)
  • 130 Deg F (1)
  • 160 DEG F (1)
  • 20 TO 140 DEG F (1)
  • -20 TO 225 DEG F (1)
  • -20 to 250 Deg F (1)
  • 25 TO 120 DEG F (1)
  • 32 DEGF To 122 DEGF (0 DEGC To 50 DEGC) At Less Than 70 PCT R.H Operating Temperature, -4 DEGF To 140 DEGF (-20 DEGC To 60 DEGC) At Less Than 80 PCT R.H Without Battery Storage Temperature (1)
  • 32 DEGF To 122 DEGF (0 DEGC To 50 DEGC) At Less Than 70 PCT R.H Operating Temperature, -4 DEGF To 158 DEGF (-20 DEGC To +70 DEGC) Display Temperature, -4 DEGF To 140 DEGF (-20 DEGC To 60 DEGC) At Less Than 80 PCT R.H Without Battery Storage Temperature (1)
  • 32 to 122 (1)
  • 40 to 120 Deg F (6)
  • -40 to 125 Deg F (3)
  • 5 - 131 DEG F Operating, -4 To 158 DEG F Storage (1)
  • -50 to 450 Deg F (1)
  • -95 to 2400 Deg F (1)
  • Less or = 185 (1)
  • Recommended usage 25deg. F to 120 deg. F (2)
  • Show More...

• Capacity

  

  • 1 In (1)
  • 1/2 In (1)
  • 1/2 INCH (1)
  • 1/2 to 2 Inch (Die) (1)
  • 1/8 to 2 Inch Pipe, 1/4 to 1 Inch Bolt (1)
  • 1-1/2 In (1)
  • 12 qt (11.4 L) (1)
  • 1-3/4 INCH (1)
  • 17 qt (16.1 L) (1)
  • 2 (1)
  • 2 In (1)
  • 2 INCH (3)
  • 2-1/2 In (1)
  • 2-3/4 Inch (1)
  • 250 KCMIL (4)
  • 3 In (1)
  • 3/0 AWG (3)
  • 3/4 In (1)
  • 3-1/2 In (1)
  • 350 KCMIL (1)
  • 4/0 AWG (4)
  • 500 KCMIL (4)
  • 745 cu in (12208.5 cc) (1)
  • 8 Spool (1)
  • Optimized for mild steel. Limited stainless steel capability (1)
  • See punch and knockout driver specifications. (1)
  • Show More...

• Depth

  

  • .75" (1)
  • 0.4 (1)
  • 0.65" (1)
  • 0.75" (4)
  • 1 (2)
  • 1-1/2" (38 mm) (1)
  • 12 (1)
  • 12.99 (2)
  • 16.38 (1)
  • 17 (1)
  • 19.76 (2)
  • 2 in;5.08 cm (1)
  • 2.5 in;6.35 cm (3)
  • 2.52 (1)
  • 20.59 (1)
  • 22.1 (3)
  • 4" (101.6 mm) (1)
  • 5.8 (1)
  • 8.11 (1)
  • 8.5 (1)
  • 9.72 (1)
  • Show More...

• Accuracy

  

  • +/- (2 Percent + 6) AC Voltage, +/- (4 Percent/1.5 Percent + 5d) DC Voltage, +/- (2 Percent + 5d/1.2 Percent + 3d) AC Current, +/- (3.5 Percent + 6d) Capacitance, +/- (0.5 Percent + 4d) Frequency (1)
  • +/- (2% + 2V) (1)
  • +/- 0.029° (7)
  • +/- 2 Percent (1)
  • +/- 4° F or +/- 2%; Accuracy Below Freezing is +/- 4° F Plus 0.2 Degrees Per Degree Below 32° F (1)
  • ±(1.5% +2) - AC Voltage;±(1% +1) - DC Voltage;±(3% +3) - AC Current;±(1% +2) - Resistance (2)
  • ±(3% + 3 Counts) @ 45 Hz to 66 Hz (Field Sense AC Voltage True-RMS, Field Sense AC Current True-RMS);±(1% + 2 Counts) (FieldSense Frequency (Hz));±(1.5% + 2 Counts) @ 45 Hz to 66 Hz (Volts AC True-RMS);±(1% + 2 Counts) (Volts DC, Resistance) (1)
  • ±0.05% (DC Voltage);±0.7% (AC Voltage);+/-0.2% (DC Current);+/-1% (AC Current);+/-1% (Temperature);±0.2% (Resistance);±1% (Capacitance);±0.005% (Frequency) (1)
  • ±3/32" per 33' (±2 mm per 10 m) Vertical & Horizontal Beams, ±1/8" per 33' (±3 mm per 10 m) Plumb Up Spot, ±5/32" per 33' (±4 mm per 10 m) Plumb Down Spot (1)
  • 0.05 % of full scale (2)
  • 1.7% (AC Current);1.2% (AC Voltage);0.5% (DC Voltage);1% (Resistance) (1)
  • 1/16" from 2" to 32.8'; 1/8" from 32.8' to 65.6' (1)
  • 2% ±5 Digits (10 Hz to 100 Hz);2.5% ±5 Digits (100-500 Hz) (1)
  • 2% ±5 Digits (DC Current);1.5% ±5 Digits (20 Hz to 500 Hz) (AC Voltage);1% ±5 Digits (DC Voltage);1% ±5 Digits (mV dc);1% ±5 Digits (Resistance);1% ±4 Digits (Capacitance) (1)
  • Approximately 70 to 100% of Indicated Voltage, Except for 2V DC (84 to 100%) and >17V DC (94 to 100% of 17V) (1)
  • Class II (1)
  • IR: 32° F and Above: +/- 3° F or +/- 1.5% (Whichever is Greater); Less Than 32° F: +/- (3.6° F + 0.2° F per Degree); K-Type: 32° F and Above: +/- 2° F or +/-% (Whichever is Greater); Above 32° F: +/- 3° or +/1% (Whichever is Greater) (1)
  • Room Temperature Accuracy of +/- 2.7°F (+/- 1.5°C) (1)
  • Stated Accuracy At 23 DEG C Plus Or Minus 5 DEG C, Less Than 75 PCT R.H (2)
  • Typically at >90% of the Indicated Range (Except for 24V AC / 32V DC, >95% of Range) (1)
  • Show More...

• Voltage Rating

  

  • 0 to 750VAC, 0 to 999VDC (1)
  • 10 to 1000 V (1)
  • 100 - 600 VAC (10 - 400 HZ) Nominal For Phase Presence Indication (1)
  • 1000 V (1)
  • 1000 V (Cat II) (1)
  • 1000 V ac (1)
  • 1000 V ac/dc (2)
  • 110/125 V ac (1)
  • 12 to 1000 V ac (1)
  • 12 V;18 V (1)
  • 120 (3)
  • 120 V ac (1)
  • 12-50 Vac, 50-1000 Vac, 50-400 Hz (1)
  • 18 (1)
  • 18 V (5)
  • 18V DC (1)
  • 1k (1)
  • 50 to 1000 V ac (3)
  • 5V To 600V (1)
  • 600 (3)
  • 600 mV;6 V;60 V;600 V;1000 V (1)
  • 600 V (Category IV);1000 (Category III) (1)
  • 600 V ac (2)
  • 600 V ac/dc (1)
  • 600/1000 V (1)
  • 70 to 600 V ac (1)
  • 750//999 (1)
  • 90 to 1,000 (1)
  • 90 to 1000 V (1)
  • CAT IV 600 V / CAT III 1000 V safety rating (1)
  • Show More...

• Product Type

  

  • (5)Super Sawzall 4/6T 6L (1)
  • 1/2 In. Conduit Bender (2)
  • 1/2X6 SDS Plus Hammer Drill Bit 87308 (1)
  • 1/4" Magnetic Nut Driver 6" Shaft (1)
  • 1/4" SL Power Drivers 1" Bit PK 5 (1)
  • 1/4" SL Power Drivers 3-1/2" PK 5 (1)
  • 1/4X2-9/16 Magnetic Hex Chuck 87406 (1)
  • 100 FT. Polyester Fish Tape (2)
  • 12 Pocket Tote W/Shoulder Strap (1)
  • 12-Ton (8)
  • 13 PCS. High Speed Steel Drill Kit (1)
  • 200 FT. Polyester Fish Tape (2)
  • 29 PCS. High Speed Steel Drill Kit (1)
  • 2-In-1 Nut Driver, Hex, 1/4", 5/16" (1)
  • 3 Tier Material Pouch (1)
  • 3/16 In. 2 Cutter SDS Carbide Bit (2)
  • 3/16" SL Drivers 3-1/2" Bit PK 5 (1)
  • 3/16" SL Power Drivers 1", PK 5 (1)
  • 3/4 In. Conduit Bender (2)
  • 3/8" X 8" X 10" SDS Bit (1)
  • 3/8” Magnetic Nut Driver Bulk 10 (2)
  • 3M™ Fire Barrier Moldable Putty Pads MPP+ (2)
  • 3M™ Wire-Pulling Lubricant WL (3)
  • 4-3/8'' Hole Dozer Hole Saw (1)
  • 5/16" Magnetic Nut Driver (1)
  • 50 FT. Polyester Fish Tape (2)
  • 7/16" Power Nut Driver 5" Length (1)
  • 7/8 In. Hole Saw (1)
  • 8.5-Oz Foam Duct Sealant Kit Bulk 6-Pack (1)
  • Accu-Bend(TM) Conduit and Pipe (2)
  • Adjustable Wrench (2)
  • Advent Stepladder (5)
  • Alligator Pliers (2)
  • Angled Diagonal Cutter (3)
  • Anti-Oxidant Compound (4)
  • Auger Drill Bit (2)
  • Bandsaw Blade (6)
  • Bandsaw Blades 3PK Compact (2)
  • Bender With Handle (3)
  • Bonduit® Conduit Adhesive Kit (1)
  • Bonduit® Conduit Adhesive Kit W/Dispensing Tool (1)
  • Butt Pouch (2)
  • Cabinet Tip Mini Screwdriver (2)
  • Cabinet Tip Screwdriver (3)
  • Cable Cutter (7)
  • Cable Stripper (2)
  • Canvas Bag (2)
  • Canvas Zipper Bag (3)
  • Carbide Cutter Sheet Metal (3)
  • Carbide Hole Cutter (2)
  • Chico A Sealing Compound (2)
  • Chico X Fiber (2)
  • Clamp Meter (3)
  • Clamp Meter, Ideal, Tightsight, 760 Series With TRMS, Capacitanc (2)
  • Cleaner (2)
  • Cobra Pliers (2)
  • Color Coded Drive Bit (8)
  • Comfort Belt (2)
  • Comfort Combo Belt (2)
  • Comfort Grip Glove (8)
  • Compact Band Saw Blade (4)
  • Conduit And Pipe (2)
  • Conduit Locknut Wrench, 1/2", 3/4" (1)
  • Conduit Piston (2)
  • Contact Cleaner (5)
  • Crimping Tool (1)
  • Crimping/Cutting Tool (2)
  • Cutting Oil (2)
  • Cutting Plier (3)
  • Demolition Gloves (3)
  • Diagonal Cutting Plier (5)
  • Digital Clamp Meter (2)
  • Dipped Gloves (4)
  • Draw Stud (1)
  • Drill Bit (22)
  • Drill Bit Set (2)
  • Drill Tap Bit (2)
  • Drive Bit (10)
  • Driver Bit (11)
  • Duct Seal (2)
  • Electrical Tester (2)
  • Electrician's Scissor (3)
  • Electrician's Tool Belt (6)
  • Electronic Ac/DC Voltage Tester (2)
  • Exploding Garbage Can (1)
  • Fiber (2)
  • Fire Barrier Sealant (2)
  • Fire Stop Pillow (1)
  • Firestop Pillow (1)
  • Firestop Sealant (3)
  • Flat Boring Bit (8)
  • Flush Cutter, Lightweight, 5" (1)
  • Foam Carrier (6)
  • Folding Hex Key Set (3)
  • Folding Utility Knife (2)
  • Forcelogic™ M18™ 10-Ton Knockout to (3)
  • Fuse Puller (2)
  • Glove (13)
  • Groove Joint Plier (5)
  • Ground Rod (1)
  • Ground Rod Driver (2)
  • Hard Hat (4)
  • Heavy Duty Degreaser (1)
  • Heavy Duty Side Cutting Pliers (2)
  • High Leverage Cable Cutter (2)
  • High Tension Hacksaw (2)
  • High Voltage Splice Cleaner (1)
  • Hole Cutter (3)
  • Hole Saw (26)
  • Hole Saw Arbor (5)
  • Impact Driver Bit (9)
  • Impact Socket Adapter (2)
  • Intumescent Putty (1)
  • Jab Saw (2)
  • Journeyman Pump Pliers (1)
  • Keystone-Tip (3)
  • Knock'Er Loose Penetrating Solvent 13 Oz (2)
  • Knockout Seal (2)
  • Line Measuring Tape (5)
  • Linemans Pliers (2)
  • Linemeasuring Tape (5)
  • Locking Bit Holder (2)
  • Locknut Wrench (2)
  • Long Nose Plier (3)
  • Long Nose Pliers Side Cutting (2)
  • Long Nose Side Cut Plier (2)
  • Long Nose Side Cut Pliers, 7-1/2" L (1)
  • Louisville Ladder (2)
  • Low-VOC Cleaner (2)
  • Lubricant (8)
  • M12™ 3.0AH Battery Pack (2)
  • M18 Fuel™ Deep Cut Band Saw (2)
  • Magnetic Bit Holder (4)
  • Magnetic Hanger (2)
  • Magnetic Hex Tool (3)
  • Magnetic Nut Driver (7)
  • Manual Crimp Tool (2)
  • Marking Paint (8)
  • Masonry Drill Bit (4)
  • Masonry Screw Tool 51002 (1)
  • Metal Blade (9)
  • Metal-Cutting Blade (6)
  • Mid-Flex Glow Rod Set (2)
  • Multi Purpose Pliers (1)
  • Multi-Bit Screwdriver and Nut Driver (4)
  • Nut Blaster (2)
  • Nut Driver Cushion-Grip (1)
  • Nut Driver Set (4)
  • Nut Driver Sets (2)
  • Oxide Inhibitor (2)
  • Padded Rig (1)
  • PH2/SQ2 DBL End Bit (1)
  • Phillips Screwdriver (3)
  • Phillips-Tip (3)
  • Phone Holder (3)
  • Phone Holder with Belt Clip (3)
  • Pilot Bit (2)
  • Pilot Drill Bit (2)
  • Pipe Spring Bender (1)
  • Pipe Thread Sealant (6)
  • Pliers Wrench (2)
  • Pocket Knife (4)
  • Polarized Aqua Precision Blue Mirror (2)
  • Primer (6)
  • Professional Grade Shovel (4)
  • Protective Eye Glass (2)
  • Protective Eyewear (7)
  • Pulling Device (23)
  • Pull-Line (3)
  • Pump Plier (3)
  • Punch & Die Set (2)
  • Quick-Rotating (3)
  • Ratcheting Cable Cutter (2)
  • Receptacle Tester (3)
  • Reciprocating Saw Blade (4)
  • Replacement Bit (3)
  • Replacement Bits, Square, #1, #2 (1)
  • Replacement Blade (2)
  • Replacement Plier Handle (2)
  • Roof Flashing (3)
  • Roof Jack (2)
  • Rope (4)
  • Rope and Fish Tape Puller (1)
  • Rotary Hammer Drill Bit (12)
  • RTV Silicon Sealant (2)
  • RTV Silicone Sealant (5)
  • Safety Glass (3)
  • Safety Glasses (4)
  • Safety Vest (2)
  • Sawzall Blade (6)
  • Sawzall® Blades (2)
  • Screw Anchor Expander (2)
  • Screwdriver (4)
  • Screwdriver Set (2)
  • Sealant (2)
  • Sealing Compound (4)
  • Sensor (2)
  • Ship Auger Bit (12)
  • Shockwave Impact Duty Magnetic Nut Driver Set (2)
  • Side Cut Stripping Crimping Pliers (1)
  • Side Cutting Pliers (1)
  • Small Thread Arbor (3)
  • Solvent Cement (9)
  • Sport Protective Eyewear (2)
  • Spring-Assisted Open Pocket Knife (1)
  • SQ2 Insert Bits (2)
  • SQ2 Power Bits (3)
  • Standard Pump Pliers (3)
  • Step Drill Bit (13)
  • Step Ladder (10)
  • Super Sawzall Torch Blade 10 Tpi 6 (1)
  • Swing Copper Tubing Cutter (1)
  • Tapping Tool (1)
  • Test Lead Set (2)
  • T-Handle Set With Stand (2)
  • Thread Cutting Oil (2)
  • Thread Lubricant (3)
  • Torch Carbide Teeth (4)
  • Torpedo Level (1)
  • Tote (2)
  • Ultra Cutter (2)
  • Utility Blade (2)
  • Utility Knife (1)
  • Utility Knife Blade (1)
  • V-Cutter (1)
  • Voltage Detector (2)
  • Voltage, Continuity and Current Tester (2)
  • Water Pump Plier (3)
  • Water Pump Pliers (3)
  • Web Strap (4)
  • Wedge Clamp (1)
  • Weld Metal (5)
  • Wide-Opening Straight-Wall Bucket (1)
  • Wiping Rag (3)
  • Wire Dispenser (2)
  • Wire Grabber and Lanyard (15)
  • Wire Lanyard (4)
  • Wire Puller (2)
  • Wire Pulling Glove (2)
  • Wire Pulling Guide (1)
  • Wire Pulling Tool (16)
  • Wire Rack (1)
  • Wire Rewinder and Dispenser (1)
  • Wire Shoehorn (1)
  • Wire Stripper (8)
  • Wire Stripper and Cutter (1)
  • Wire Stripper/Cutter (2)
  • Wire Stripper/Wire Cutter (3)
  • Wood Bit (4)
  • Work Gloves (3)
  • Show More...

• Applicable Standard

  

  • ANSI Z87.1 (3)
  • ANSI/NSF 372/61-G, UPC (2)
  • ASTM D-2564 (1)
  • ASTM D2564, NSF, LEED, UPC (1)
  • ASTM D-2564, NSF, UPC (1)
  • ASTM E814, UL (Canada and US), UL 1479/2079, FBC, FM, VOC, STC 62 (1)
  • ASTM E814/E1966, FBC, FM (1)
  • MIL-P-46105/26433/21035/26915A (1)
  • NSF, UPC (IAPMO), LEED (3)
  • NSF, UPC, ASTM D2564 (2)
  • NSF, UPC, ASTM D2564, LEED (1)
  • NSF/ANSI 61G/372, UPC, FBC, ULC, Federal Specification TT-S-1732, CSA (US) (1)
  • Scotch-Weld[TM] (1)
  • UL (Canada and US), FDA, USDA (1)
  • UL (Canada and US), UL 1479/2079, FBC, IFC, FM, ASTM E814 (1)
  • UL (Canada and US), UL 1479/2079, FBC, IFC, FM, ASTM E814/1996 (1)
  • UL 263, ASTM E119, NFPA 251 (1)
  • UL, CSA (1)
  • UL, CSA, NSF/ANSI 61-G and 372 (1)
  • UL, ULC, CSA (US), ANSI/NSF 61G/372, UPC, FBC, CAN/ULC-S642-07, IAPMO (2)
  • UPC, NSF/ANSI 61G/372 (1)
  • Show More...

• Height

  

  • 0.91 in (1)
  • 1.156 in;29.4 mm (1)
  • 1.969 (1)
  • 11 (1)
  • 11.3 (1)
  • 1-1/4 IN (31.800 MM) (1)
  • 12 (1)
  • 12.12 (1)
  • 12.2 (1)
  • 13.75 (1)
  • 1-35/64 in;39.3 mm (2)
  • 16.75 in;42.55 cm (1)
  • 16-1/4" (412.8 mm) (1)
  • 17.0 (1)
  • 17.75 in;45.09 cm (1)
  • 18.9 (1)
  • 192 mm (1)
  • 2 in;5.08 cm (1)
  • 2.2 in;5.588 cm (1)
  • 2.52 (2)
  • 2.86 (1)
  • 2.875 in;73 mm (1)
  • 201 mm (1)
  • 218 mm;8.6 in (1)
  • 3 (1)
  • 30.5 mm (2)
  • 4 (1)
  • 4.61 (2)
  • 45 mm (2)
  • 5.0 (1)
  • 5.4 (1)
  • 5.46 (1)
  • 5.91 (1)
  • 6.25 (1)
  • 6.5 in;165.1 mm (1)
  • 6.6 (1)
  • 61.1 mm (1)
  • 7 (2)
  • 7" (178mm), 5.5" (140mm) (1)
  • 7.5 (1)
  • 8.0 (2)
  • 8.1 (1)
  • 9.5 (1)
  • 9-1/2" (241.3 mm) (1)
  • Show More...